High quality and high security, sensitively and response quickly; No backlight on keypad | Full programming from the keypad, support add/delete cards, set password, etc. Door bell button support external doorbell. | Classical appearance with useful function, designed for home and office. | Can be used as a stand alone keypad, doesn't need to connect on the computer. | Application: Home, hotel, office, apartment, factory, etc.
Comply with IEEE 802.3af Power over Ethernet. 10/100M Supported. Extend the range of PoE an additional 120 meters | Power input for single port is 13W; Power output for single port is 12.2W | Plug and Play no configuration required; No External Power Required. | 1-Port PoE Extender has 2 10/100M Lan ports,among them,one for power input,the other for power output | The PoE Extender can only be used for CCTV IP network camera PoE data extension and amplification (CAN NOT TRANSMIT HOME NETWORK OR OTHER NETWORK CAMERA SIGNAL).
Six channels of output, the output can be independent, but also jog and interlocked | Suitable for lights, electrically operated doors, windows, curtains, etc. | Learning type can be paired with more than one control | Adopting larger capacity relay, can control electrical equipment of more than 1000W | You can turn on/off the receiver with transmitter (remote control) from any place within a reliable distance; the wireless RF signal can pass through walls, floors and doors.
High Resolution: 720x480 60Hz for NTSC; 720x576 50Hz for PAL | Various Overlay Information: Camera Title, Real Time and Date, Alarm/Loss/Motion Message | Playback in QUAD or Full Screen Image | Provide Various Event Input and Detection: Video Loss Detection, Motion Detection, 60 Event Report, Built-in Buzzer and Relay Output | Connects up to 4 Video Camera: Adjustable Brightness, Contrast, Saturation, Hue and Sharpness
Support Card: 125KHz EM | Level of Protection: IP65 | Appearance: metal structure,safe,anti-vandal | Output format for EM card: Wiegand 26 compulsively | Suit For: Storage, bank, prison etc
Worldwide voltage input 110 - 240VAC | Set NC/NO outputs, can control various types of electric locks | Compact design and light weight | Based delay control circuit, lock time can be in 0-15 seconds | Note: Opening time must set to 0 second when connecting with electric controlled lock. Otherwise electric bolt lock would be Burned Down
✅Contactless RFID transponder technology | ✅Full programming from the keypad; Doesn't need to connect on the computer, can works alone | ✅The access control machine is made of high quanlity ABS plastic and the panel is made of hard shell rubber film. | ✅Lock output current short circuit protection | ✅It is widely used in factories, houses, residential quarters, offices, mechanical and electrical control equipment and so on.
The RFID card reader can't work-alone and it needs to work with Wiegand protocol access controller, such as access control panel, fingerprint device or master controller. | Support wiegand 26bits or wiegand 34bits output format. | Ultra-low power consumption, the standby current is less than 50mA | It uses high performance MCU to ensure stable performance, and low-power circuit makes the service life longer. | Widely used in factories, houses, residential quarters, offices, mechanical and electrical control equipment and so on.
✅ Ergonomic design for easier operation. | ✅ Equipped with a 2.4" TFT display screen, making programming operations more convenient. | ✅ Support Tuya Smart which is a smart home center that can let you control and manage your favorite smart devices of different brands in a single APP. | ✅ It enables you to remotely control the connected appliances via free Tuya Smart App. You can download the iOS version in App Store and the Android version in Google Play. | ✅ It is widely used in factories, houses, residential quarters, offices, mechanical and electrical control equipment and so on.
APPLICATION: Application for monitoring picture segmentation, full screen display for each channel, automatic display by turn mode. Switch between NTSC and PAL system. Picture In picture show, PIP position switched (top left, top right, bottom left, bottom right corner). | FUNCTION: Real Time Color display by four-screen, three -screen, two -screen, and can be switched to splitted by up and down, or right and left; | High Performance Freeze Function: Flicker Free Image Capture | High Resolution: 720x480 60Hz for NTSC, 720x576 50Hz for PAL | Connects up to 4 Video Camera: Adjustable Brightness, Contrast, Saturation, Hue and Sharpness
Input voltage: DC12V/1A | The input signal of 4 video signal | Output signal of the 8 frequency signal | Video input 1.0V p-p/75 maximum 2.0Vp-p 75 | Professional broadcast class standards
Gold Plated BNC (Better transmission quality) long distance HD transmitter | Support all VIDEO devices, such as CCTV cameras, monitors, DVR, switchers, IP encoders, and other CCTV equipment | Compatible with all HD-CVI, HD-TVI, HD-AHD | Power, Video and Audio (PVA) signals are routed via UTP and RJ45 | LED indicate whether working (green light) or not working (yellow light) by RJ45
★ Card Type: 125 KHz EM card. Wiegand Interface: Wiegand 26-37 bit. | ★ The “#” key can be used as doorbell button. | ★ IP65 waterproof keypad and proximity card reader in one device. | ★ Designed for outdoor environments with a sealed, weatherproof design allowing you to easily mount anywhere. | ★ Protects from unwanted entry with rugged vandal-resistant backlit metal enclosure.
Stainless steel Panel with Elegant Style | 500000 Cycles tests | Suitable for Door: Hollow Door | Output Contact: NO/COM | This door release exit button can be used for any access control application and is commonly used in offices, banks, gas stations, department stores and many more
Switch Type: NC (Normal closed type) | This Contact Works with Any Access Control or Burglar Alarm System Available | This contact can't connect directly to power, it works with your alarm system provide a switch signal. Working current under 12V | Great for use in family and factory window, door. etc. | NC means Normally Closed: When the magnet together, the circuit is conductive (light on); When the magnet separate, the circuit is not conductive (light off).
The RFID card reader can't work-alone and it needs to work with Wiegand protocol access controller, such as access control panel, fingerprint device or master controller. | The maximum reading distance is 6cm. | Waterproof, conforms to IP66. | This device uses high performance MCU to ensure stable performance, and low-power circuit makes the service life longer. | Widely used in factories, houses, residential quarters, offices, mechanical and electrical control equipment and so on.
The RFID card reader can't work-alone and it needs to work with Wiegand protocol access controller, such as access control panel, fingerprint device or master controller. | Support wiegand 26bits or wiegand 34bits output format. | Ultra-low power consumption, the standby current is less than 50mA. | It uses high performance MCU to ensure stable performance, and low-power circuit makes the service life longer. | Widely used in factories, houses, residential quarters, offices, mechanical and electrical control equipment and so on.
The RFID card reader can't work-alone and it needs to work with Wiegand protocol access controller, such as access control panel, fingerprint device or master controller. | Support wiegand 26bits or wiegand 34bits output format. | Ultra-low power consumption, the standby current is less than 50mA. | It uses high performance MCU to ensure stable performance, and low-power circuit makes the service life longer. | Widely used in factories, houses, residential quarters, offices, mechanical and electrical control equipment and so on.
Strong Zinc Alloy Electroplated anti-vandal case | Full programming from the keypad | 2000 users, supports Card, PIN, Card+PIN | Can be used as a standalone keypad | This keypad can't be compatible with UHF card and encrypted card, for example, the card of following brands: HID, Indala,Cobra, APCiK ,Paradox,Radio,Honeywell, etc.
✅With lock relay output, secure / normal Mode, NO / NC output | ✅Suitable for mounting either indoor or outdoor in harsh environments | ✅Full programming from the keypad, can be used as a stand alone keypad | ✅The unit support up to 2000 users in either a Card, 4 digit PIN, or a Card + PIN option | ✅This keypad can't be compatible with UHF card and encrypted card, for example, the card of following brands: HID,Indala,Cobra,APCiK,Paradox,Radio,Honeywell, etc.
The RFID card reader can't work-alone and it needs to work with Wiegand protocol access controller, such as access control panel, fingerprint device or master controller. | Support wiegand 26bits or wiegand 34bits output format. | Ultra-low power consumption, the standby current is less than 50mA. | It uses high performance MCU to ensure stable performance, and low-power circuit makes the service life longer. | Widely used in factories, houses, residential quarters, offices, mechanical and electrical control equipment and so on.
This card reader needs to work with Wiegand protocol access controller, such as control board, fingerprint device or master controller and it can't work alone. | Built-in Antenna | Built-in LED (Double Color LED) | Built-in Loud Speaker (Buzzer) | Card Type: Standard 13.56Mhz IC card (Can't support HID, Indala,Cobra, APCiK ,Paradox,Radio,Honeywell,etc)
Attencion: Non UL-Certification Listed | Key lock available; Dual Action | The HC102 conventional manual call point designed for conventional fire alarm system for reporting fire or emergency condition by its PUSH IN/PULL DOWN handle latches | Pushing in and then pulling down on the handle activates the normally-open alarm switch. Once latched in the down position , the word" ACTIVATED" appears at the top in bright yellow, with a portion of the handle protruding at the bottom as a visible flag. | Note: Call point can't work alone, need work with alarm control panel