[for DJI Action 4, Action 3]: SmallRig Camera Cage 4119 is specially designed for Osmo Action 4, Action 3. It provides all-around protection as well as varied mounting points to meet your demands for more professional videoing. | [Compatible for DJI Mic & Original Adapter]: The left side of the cage allows attaching for DJI Mic. The bottom and right side of the magnetic mounts supports the original magnetic quick-release adapter for DJI or SmallRig Magnetic Adapter Mount 3662 for a quick switch between horizontal and vertical modes. | [Quick Lock & Full Access]: With a form-fitting design, it easily secures/releases the camera via a press lock and gives full access to buttons and applying screen proctor. You can replace the battery from the right side without removing the cage. | [Rich Extension]: A cold shoe mount at the top and anti-twist 1/4"-20 thread holes on three sides are available for attaching accessories， such as SmallRig Super Clamp 3757, SmallRig Dual Cup Camera Mount 3566, SmallRig Magnetic Adapter Mount 3662 for time-lapse photography, skateboarding, car shooting, and other scenes. | [Material]: Made of aluminum alloy and silica gel, it is lightweight and solid.

【For Canon C70】The handheld kit 3899 includes a top handle, a cable clamp for HDMI and a half cage includes a top plate, a side plate, a baseplate (with a extended baseplate). Designed for providing accessory mounting points and a comfortable handheld shooting experience | 【Multiple Mounting Options】The handheld kit comes with multiple mounting points: the 1/4" threaded holes able to mount Magic Arm (SmallRig 2115 / 2071); 3/8" locating holes for ARRI and NATO rail able to mount Monitor Mount (SmallRig 2903 / 2905 / 3601); and built-in cold shoes able to mount microphone (SmallRig 3468) and LED light (SmallRig 3861) | 【Full Access to Camera】Maintains full access to original camera buttons. The top plate compatible with the original handle kit and microphone holder. In addition, the cable clamp for HDMI can prevent accidental disconnection and ensure stable signal transmission | 【Multi-scene Shooting】After removing the extended baseplate, it can be directly mounted onto RS 2 / RSC 2 and tripod for Acra-Swiss. Allow quick switch among handheld, stabilizer and tripod shooting. Also, an Allen wrench included for easy access and disassembly. Note: Please remove the detachable extended baseplate before attaching stabilizers for DJI RS 2/RSC 2 | 【Featured Recommendations】Features built-in NATO rail that allows you to attach Side Handle 3260 / HSN2093 / HSN2427 quickly. A hole used to follow focus on the side plate able to install 12mm / 15mm Single Rod Clamp 3276 Package includes: 1 x Handle 2439, 1 x Cable Clamp 1639, 1 x Top Plate, 1 x Side Plate, 1 x Baseplate, 1 x Detachable Extended Baseplate, 6 x 1/4''-20 Screw, 1 x User Manual

VERSION 3: Great promotion at special price, the 3rd update for a better experience. | SmallRig Camera Cage 1661 is a form fitting aluminum exoskeleton that protects your camera and offers mounting options to attach accessories. With the camera in the cage, you still have access to the SD card slot, battery compartment, and all camera controls. | The built-in shoe mount is used to connect light accessories, such as microphone, EVF mount and more. A 1/4"-20 threaded hole at the front enables it to attach to 15mm Micro Rod with 1/4'' Thread 915(SmallRig 915) for follow focus. | Compatible with HDMI Clamp 1822(smallRig 1822), wooden handle 1970 (SmallRig 1970), metabones lens adapter support 1787 (SmallRig 1787). Please search "SmallRig APU2389" if you need an arca standard plate to unscrewing the camera from the cage without removing the plate. | The front of the cage is designed for anti-twisting and excellent heat dissipation, beneficial for more enjoyable shoot.

Compatibility: Compatible with camera cage or external side handgrip with strap slot (width larger than Φ10mm) on both upper and lower sides, or L-Bracket/baseplate with strap slot on the lower side. Please make sure half cage with a wrist strap hole on the bottom when work with your half cage. (A camera split ring is required when using with the L-Bracket/baseplate, and the split ring is not included) | Quick Adjustable and Detachable: The top adopts a convenient press buckle locking method, Convenient for disassembly. The hand strap comes with a -style snap which allows for quick adjustment of tightness to ensure security. It could be quickly tightened without loose with a gentle pull. The strap adjusts to fit hands of all sizes and snaps on easily | Secures Your Camera: Improving shooting stability and safety, effectively protecting your camera from dropping. The surface of the hand strap is made of PU material, which makes the strap wear-resisting and durable | Breathable and Comfortable: Filled with high-quality material, covered with microfiber leather, the hand strap will bring better shock-proof experience and excellent effect of moisture absorption and perspiration, to keep hands dry and comfortable | NOTE: 1. This product must work with cage, side handle, L-bracket, bottom plate with a strap hole. (width larger than Φ10mm) 2. This product does NOT include baseplate. 2. Do not expose to the sun. 3. Wash by hand and dry in a cool and ventilated place

Universal Compatibility: Compatible with camera cage or external side handgrip with strap slot on both upper and lower sides and its width no less than 12mm,or L-Bracket with strap slot on the lower side (a camera split ring is required when using with the L-Bracket, and the split ring is not included) | Secures Your Camera: Enhance shooting stability and grips the hand and wrist to effectively protect your camera from dropping.The surface of the hand strap is made of PU material, which makes the strap wear-resisting and durable | Breathable and Comfortable: Filled with high-quality EVA material, covered with microfiber fabric, will bring better shock-proof experience and excellent effect of moisture absorption and perspiration, to keep hands dry and comfortable | Quick Adjustable:It could be quickly tightened without loose with a gentle pull.The strap adjusts to fit hands of all sizes and snaps on easily. | Note: 1. Safety load: 12.5kg. 2. Do not expose to the sun. 3. Wash by hand and dry in a cool and ventilated place.

Two in One Table Mount: The extendable desk mount is equipped with one 1/4" ballhead and one adapter for ring light, which is a perfect choice for supporting ring light, DSLR camera, smartphone, panel light, etc. It is suitable for making up, live streaming videography, photography, or other shooting work. | Height Adjustable: The desktop light stand is designed with 3 sections extending poles, with a height-adjustable from 13"-33" / 35.4cm-90cm, which provides the possibility for any overhead shootings and lightings. A rubber ring wingnut helps you to fix the pole easier. The bracket is suitable for desktops with a thickness of less than 5cm/1.96". Note: Please pay attention to the size information to avoid purchasing errors. | 360° Swivel Ballhead: The ballhead with top 1/4" screw ensures 360° panoramic rotation for panoramic shooting, -90°/+45° front tilt for multi-angle adjustment, which helps you to easily adjust your device without removing them. The load capacity is 3-10KG. Note: In order to enhance the stability of the bracket, the base of the bracket is an integrated design and cannot be disassembled. | With Extension Arm: The total length of the aluminum alloy extension arm is 355mm, and the load-bearing capacity can reach 2KG. The extension arm is equipped with an 18mm ball head, and the top 1/4" screw can be connected to fill lights, microphones, smartphones, etc. | Tough & Reliable: Made of aviation aluminum alloy material, with the strong tube (diameter 22-25mm), it is more reliable and stable to use and ensures a long time use without getting rusty. The matte surface is easier to clean without leaving any fingerprint.

【ONLY FOR DJI RS 2】SmallRig Extended Quick Release Plate 3031 is specially designed for DJI RS 2 gimbal. It is used to mount professional or larger cameras on your handheld gimbal stabilizer. For example, it is compatible with Canon C100/200/300, RED, Komodo on the RS 2 gimbal. | 【1.6" LONGER THAN ORIGINAL PLATE】The plate 3031 measures 40mm (1.6 inches) longer than the original RS 2 quick release plate to provide additional leverage for larger cameras and provide more room for mounting optional components, such as a rod mount for a follow focus motor, zoom motor, or lens support. | 【ANTI-TWISTING DESIGN】The plate features both 3/8"-16 and 1/4"-20 camera mounting screws for mounting a variety of cameras. You can add Counterweight Kit 3125 to the rear to balance the stabilizer, attach Lens Support 2850 to protect the lens mount, and Focus Motor Component 2851 to connect the RS 2 original focus motor when the lens is mounted on a large camera body or a camera with battery grip. | 【1/4" COUNTERWEIGHT THREAD ON REAR】There is a 1/4"-20 thread on the bottom rear of the plate to add an optional counterweight. It can be used for adding the Counterweight AAW2284 or AAW2285 for balance. | 【RUBBER PADS & MEASUREMENT SCALE】Padding on top of the plate protects your camera from twisting or scratching. Measurement markings on the side allow you to keep track of the best plate balancing position for your camera.

【Compatibility】SmallRig formfitting aluminum half cage 3639 is expecially designed for Alpha 7R V/Alpha 7 IV/Alpha 7S III/Alpha 1/Alpha 7R IV with lightweight protection of the camera. | 【Stable And Anti-twist】It includes two locking side plates and one 1/4"-20 screw at the bottom to lock the camera and prevent deflection and gives access to dials and buttons while retaining the grip experience of a bare camera. | 【Multiple Mounting Points】The half cage 3639 built-in all-around protective spacers protect the camera from being scratched. 1/4"-20 threaded holes, 3/8"-16 locating holes for ARRI, and cold shoes support top handle 2165, side handle 2093, monitor mount 2903, microphones, LED lights, etc. Quick release plate for Arca at the bottom is design for DJI RS 2 / RSC 2 / RS 3 / RS 3 Pro and the quick release plate for DJI RS 2 / RSC 2 / RS 3 / RS 3 Pro stabilizers for stabilizer shooting. | 【Built-In Accessories】This half cage 3639 stores a flat-head screwdriver and allen wrench that facilitates disassembly and assembly. The cage maintains rubber padding to prevent your camera from scratching and scuffing. | 【Note】①HDMI Cable Clamp 3000 is not compatible with Alpha 1 and Alpha 7R IV cameras and will interfere with the synchroterminal interface when used on Alpha 7R V camera. ②To use the side lock, please remove the split ring on the left side of the camera first | 【Power Backup Solution】SmallRig NP-FZ100 camera battery charger set is available now, two 2040mAh(Real) rechargeable batteries and a charger brings long battery life for your videos and photos shooting, if you need a sufficient power supply, please search SmallRig NP-FZ100 Battery 3824

Universal Compatibility: SmallRig Monitor Mount 3809 features a highly compatible cold shoe on the bottom, which fits camera hot shoe or shoe mount on camera rigs such as camera cages or handles. The 1/4"-20 screw on the top can attach a field monitor, LED light or other accessories. | 360° Swivel & 180° Tilt: This camera monitor holder could swivel 360° and tilt 180°, and keep your monitor or LED light in any fixed position without using tools. | Max Load Capacity: 90° tilt load capacity is 3.2kg, 45° tilt load capacity is 2.5kg, and 30° tilt load capacity is 2.3kg. Its tightness is adjustable on each axis. | Secure Locking: The large thumbscrew head makes installation easily and also features locking holes for an Allen wrench to further tighten it. The protective rubber pad on the top provides more friction to prevent deflection. | What's Included: 1 x Monitor Mount, 1 x Allen Wrench. The 1/4"-20 threaded hole at the bottom enables it to use with Magic Arm such as SmallRig 2070 and Ball Head 2948, etc. | Note: Please do use the Allen wrench to re-tighten the thumbscrew for further security; Please install the monitor before adjusting its angle.

Sturdier Upgrade: Enhanced with non-slip threads and an anti-twist structure based on the classic design of the 1138 crab super clamp, supporting up to 1.5kg without loosening. Allows you to focus on content creation. | Wide Compatibility: The 4373 Multi-Function dual ball head comes with clamps and 1/4"-20 screw to mount cameras, webcams, monitors, lights, microphones, action cameras, or any gear. Then, lock the clamps to the rod/tube/table/frame/tripod with the locking knob; no drilling required. | More Accessories: We have added an adapter mount for GoPro and a phone clamp mount, suitable for more photographers and video producers. Whether you are shooting in a car or fixing your camera on a desktop, these essential accessories are perfect for the video era. | Your Premium Choice: Crafted from aluminum and stainless steel, this super clamp endures years of testing. A product with a decade of sales history, chosen by approximately 300,000 users. We ensure satisfying after-sales service for your peace of mind. | Packaging and Note: We use full kraft paper for packaging, no plastic. Inside the package are a super clamp, a phone clamp mount, and an action camera mount. Please note: When using in dynamic scenarios, ensure to attach the safety rope to prevent any accidental device drops!

?TOP HANDLE?This SmallRig top handle equipped with built-in shoe mount for microphone and LED lights, is designed for handheld shooting, can holds the weight of a large cage rig with various attachments with ease. | ?MOUNTING POINTS?The SmallRig camera handle with abundance of 1/4'' and 3/8'' mounting points, can attach different gears on it for additional attachment options and DIY operations, such as monitor mount 2905, magic arm 2065, wireless remote control 2924, shotgun microphone 3468, led light 3286 | ?COMPATIBLITY?This SmallRig camera handle grip can be attached to a camera cage directly with 2pcs 1/4? screws ( the adjustable space between two 1/4 inch screws is 30mm-40mm), Fits any cage with the standard 1/4?- 20 thread on top, such as SmallRig cage 2087, cage 2168, cage 3667, cage 1661 and most cages of SmallRig. | ?EXQUISITE DESIGN?The versatile handle is made by aluminium alloy, this material is light, durable, is very sturdy and solid, you will feel very safe carrying the rig around with this solid and light handle stabilizer rig. | ?SATISFACTION WARRANTY?All SmallRig camera rigs come with a YEAR warranty, any problem after purchasing please contact us, we will try our best to help you within 24 hours.

More Secure: SmallRig Wrist Strap 3926 is designed to prevent your expensive camera from accidental drops. The weight of 30g will not add extra burden, and the total length is 255mm / 10inches. | Universal Compatibility: Designed for all brand mirrorless cameras, DSLR and other compact cameras. It is attached to camera either by a cord or a metal loop, suited for most camera strap holes. | Comfortable and Durable: Made of high quality genuine leather, microfiber and nylon, it offers great comfort and security around your wrist. Leather with microfiber linings makes it soft, breathable and wearable. | Stylish Design: This camera wrist strap with retro brown color adds elegant vintage elements to your camera. Please note that wrist straps generally have varying colors, for they are made of leather. | Tightness Adjustable: Fit for all wrist sizes with microfiber stopper to cinch the strap in place.

【Quick Leveling Design】The integrated Leveling Base design provides 10 °/- 10 ° angle range adjustment, which is convenient for users to high-speed level. This fluid head features fixed damping for a smooth operation experience. This tripod head can be tilted +90°/-55° and swiveled 360° for multi-angle shooting. | 【Compact and Heavy Bearing】This compact fluid video head weighs only 350g / 0.77lbs, features 88mm/3.46" in height and a 37mm/1.46" diameter in base, which is convenient to carry. The safety payload of this tripod head is 4 kg/8.8lbs. | 【Versatile Compatibility】SmallRig Video Head with Leveling Base CH20 is fully compatible with SLRs, mirrorless cameras, pocket cinema cameras, etc. The bottom 3/8"-16 & 1/4"-20 with screw adapter, compatible with most tripods and monopods. Extendable 1/4"-20 standard threaded hole meets the needs of external magic arms,microphones,etc. | 【Removable Two-Way Handle】Equipped with a removable two-way handle, the pan-tilt enables you to rotate and adjust it for compact storage. The adjustable length is 175mm-240mm(6.9"-9.5"). It enables you to get the best experience in overhead or elevation shot. Besides, a included Allen wrench makes it easy to install or remove your camera. | 【Upgrade Functional QR Plate】The QR plate features a retractable anti-drop design at its bottom, complete with a telescopic pin that keeps the camera steady and secure. The design accommodates two screws, helping prevent any deflection during video shooting. Please note that the additional screw packaging is not included. | 【Package Includes】1 x fluid head, 1 x quick release plate (for Arca-Swiss standard), 1 x Allen wrench, 1 x 1/4 "- 20 thread adapter, 1 x Instructions.

For DIY Camera Accessories : 1/4" 20 extension plate is useful and versatile little bar for DIY camera mount. It comes with many fixing points. Use it to interconnect various camera accessories and set up extra parts as needed | Multiple Thread Holes: small cheese plate camera accessories 1091 is equipped with industry standard 1/4"-20 and 3/8"-16 threaded holes, which make it possible to mount on any 1/4"-20 and 3/8"-16 accessories | Multiple Functions: It’s handy for all those little conversion fit this camera mounting adapter, it can be used as an on-camera multi-gadget mounting accessories, or simply use it as an additional handle when fitted to the top of a camera | Easy to Carry :Supplied with arrays of mounting holes in standard 9mm spacing .Easy to put in the bag | Package Includes: 1 x Cheese Bar; 2 x 1/4'' Screw ; 2 x M4 Screw; 1 x 1/4'' Double Head Screw ; 1 x Hex Screw

【VERSATILITY】SmallRig 2732 comes with a super clamp with 1/4" and 3/8" threads and an articulating arm with 1/4” screws on both ends respectively | 【SUPER CLAMP】This super cool clamp was made of lightweight aluminum alloy, comes with 1/4"-20 and 3/8"-16 thread and can be mounted virtually anywhere, such as cameras, lights, umbrellas, hooks, shelves, plate glass, cross bars, even other Super Clamps. It can open maximum 54mm and minimum 15mm | 【360°ROTATION】Double 360 degrees Ball Head Articulating design adjusts any angles based on your needs. With 1/4" thread on both ends to install any on-camera flash lights, microphone,LCD monitor,DV Monitor, microphone on one end and other accesorries like cage, NATO Rail 1973, 15mm Rod 1182 and Quick Release Rod Clamp 1976 etc | 【RUBBER CUSHION】Both the Super Clamp and the Articulating Magic Arm features a rubber cushion which could prevent the scratches of monitor and help to lock your accessories tighter | 【WHAT YOU CAN GET】Made of aluminum alloy and stainless steel, sturdy and durable. Package includes: a Super Clamp and a Articulating Magic Arm

COMPATIBILITY: SmallRig Cold Shoe Adapter with Windshield is exclusively designed for Sony ZV-1 II / ZV-1 / ZV-1F / ZV-E1 / ZV-E10. It is providing the simplest vlog solution for Sony ZV-1 II / ZV-1 / ZV-1F / ZV-E1 / ZV-E10 creators. | LED LIGHT RELOCATION: SmallRig 3526 allows the camera to be fitted with both a windshield and a LED light. It solved the problem that the hot shoe is occupied and accessories cannot be installed. | FAUX FUR MATERIAL: The windshield dedicated microphone faux fur material and thickened inner design for effective noise reduction during outdoor shooting. | NYLON-MADE COLD SHOE: The cold shoe adapter has high-quality nylon with more strength. It toughness and features a scratch-resistant cushion on the bottom, which locks the camera securely. | COMPATIBLE WITH THE ORIGINAL WINDSHIELD: The cold shoe adapter is compact, lightweight, and easy to carry around. The kit is compatible with the original windshield of the camera. | Power Backup Solution: SmallRig NP-FW50 camera battery charger set is available now, two 1030mAh(Real) rechargeable batteries and a charger brings long battery life for your videos and photos shooting, if you need a sufficient power supply, please search SmallRig NP-FW50 Battery 3818

Standard shoe mount Compatible: allow you to attache Micorphone, Flash, LED, Handle, etc. Fit for all the accessories with 1/4"-20 threaded holes. | This 3rd version: 1. One short screw meets your need and help you to protect your equipement. 2. There comes with two secure bending bevels on the one end to prevent accessory accidental removal instead of a small screw on the cold shoe. | Secure tightly via the two M2.5 screws, and a 1/4" thread hole for you to attache to camera cage, plate, handles, or other accessories. | We specially offer two white arrows on the surface to show the mounting ways for your convenience. | Package included: 1 x 1/4"-20 screw; 2 x M2.5 Screws; 2 x Hex spanner Diamatre : 25mm x 25mm; Material: Aluminum Alloy

【Wide Application】A universal double ball head with cold shoe and 1/4’’ screw on both ends, and can be widely used with a monitor/small action camera/LED Lights/microphones/flash when shooting | 【180 Degree Rotation】The ball mount can be easily rotated by 180 degrees and secured by the side wingnut for a perfect viewing angle | 【Easy to Lock】the locking knob is used for securing and operating the ball head faster | 【Comes with Shoe Base】The ballhead comes with a shoe base, which could mount on a camera cage/handle/plate, or directly on cameras such as or Canon, for Nikon, for Olympus, for Pentax, for Panasonic, for Fujifilm & for Kodak. | 【NOTICE】not recommend for monitor or LED light over 1.0 kg/2.2 lbs.

【FOR BALANCING CAMERA ON GIMBAL】SmallRig Counterweight Kit 3125 is designed to balance cameras with long-lens setups on gimbals by mounting counterweights behind your camera. | 【COMPATIBILITY】It clamps onto the camera plate via a thumbscrew and is compatible with popular stabilizers on the market such as for DJI Ronin-S, RS 2/RSC 2/RS 3/RS 3 Pro, and for ZHIYUN Crane 2S/3S/Weebill-S, etc. | 【STACKABLE VIA 1/4"-20 SCREW AND HOLE】There are multiple 1/4"-20 threaded holes at the bottom, and counterweights can be stacked to meet the balance request in different scenarios. | 【CONVENIENT FOR STORAGE】SMALLRIG 3125 is made of aluminum alloy and stainless steel, corrosion resistance. The small shape is convenient for storage, and with strong versatility. | 【WHAT YOU GET】Package Includes: 1 x Mounting Clamp, 2 x 100g Counterweights.

【COMPATIBILITY】the C5521 to LEMO 2-Pin charging cable is compatible with Blackmagic Design Pocket Cinema Camera 4K & 6K for battery usage | 【HIGH CUSTOMIZATION】SmallRig DC5525 to 2-Pin Charging Cable 2920 can be also used with the SmallRig NP-F Battery Plate 3168 | 【CONNECTION】It plugs into BMPCC 4K/6K at one end and connects to the battery plate via the 5.5/2.5mm DC male connector | 【PLEASE NOTE】Please plug the cable to the 12V output on the battery plate | 【PARAMETER】The total length is 40cm/15.74 in. Made of ABS, the cable 2920 weighs only 17g±5g/0.59oz

【COMPATIBILITY】SmallRig 2921 is compatible with selected Sony A5/A6/A7 series cameras such as Sony A5000/5100/6000/6100/6300/6500/A7/A7 II. | 【HIGH CUSTOMIZATION】SmallRig DC5521 to NP-FW50 Dummy Battery Charging Cable 2921 can also use with the SmallRig NP-F Battery Plate 3168, which could achieve charging without opening the battery port for changing the battery. | 【CONNECTION】It plugs into the FW50 battery-powered camera at one end and connects to the battery plate via the 5.5/2.1mm DC male connector. | 【PLEASE NOTE】Please plug the cable to the 7.4V output on the battery plate. | 【PARAMETER】The total length is 60cm/23.62in. Made of ABS, the cable 2921 weighs only 29g±5g/1oz | 【RELATED PRODUCTS】SmallRig 3168 (battery plate for charging), SmallRig 3818 (NP-FW50 1030mAh).

【COMPATIBILITY】SmallRig 2922 is compatible with Sony Alpha a9 II/a9/a7R IV/a7R III/a7 III/a6600 Cameras. | 【HIGH CUSTOMIZATION】SmallRig DC5521 to NP-FZ100 Dummy Battery Charging Cable 2922 can alose use with the SmallRig NP-F Battery Plate 3168, which could achieve charging without opening the battery port for changing the battery. | 【CONNECTION】 It plugs into the FZ100 battery-powered camera at one end and connects to the battery plate via the 5.5/2.1mm DC male connector. | 【PLEASE NOTE】Please plug the cable to the 7.4V output on the battery plate. | 【PARAMETER】The total length is 60cm/23.6". Made of ABS, the cable 2922 weighs only 36g±5g / 1.27oz. | 【RELATED PRODUCTS】SmallRig 3168 (battery plate for charging), SmallRig 3824 (NP-FZ100 Camera Battery and Charger Kit).

【Adjustable Step-less Damping】SmallRig Tripod Fluid Video Head 4165 is a professional fluid head to facilitate video shooting. It features an adjustable step-less damping system and allows you to pan the camera smoothly at a variety of speeds you desire. | 【Quick Mode Switching】The heavy fluid head adopts a newly-designed snap-on quick-release plate mount and can realize quick assembly. Also, it is compatible for DJI RS 2 / RS 3 / RS 3 Pro quick release plate and for Manfrotto quick release plate to realize a free switch between stabilizer shooting and tripod shooting. | 【Max Load up to 10kg / 22Ibs】The maximum capacity of this tripod head can be up to 10 kg / 22Ibs. And the compact fluid video head weighs only 1268g / 2.79 Ibs, features 140mm / 5.51inch in height and a 75mm / 2.95inch diameter in base, which is convenient to carry. | 【Professional Fluid Video Head】The fluid head is equipped with removable telescopic handle, which can be rotated and adjusted to make storage more compact. The adjusted length is 230-360mm / 9.05-14.17inch. And it suits both left-handed and right-handed users. With the handle, this tripod head can be tilted +90°/-60° and swiveled 360° for multi-angle shooting. | 【With One 1/4"-20 Threaded Hole】The video head also comes with one 1/4"-20 threaded hole to support the magic arm and other accessories and built-in a wrench to help install and release the camera. The package includes video head DH01 x 1, allen wrench x 1, user manual x 1. | 【Notice】This product is not compatible with SmallRig Quick Release Plate for Manfrotto-Type 3912

6-Step Counterbalance Dynamic Adjust: The professional fluid head features an adjustable 6-step dynamic counterbalance system (1, 2, 3, 4, 5, 6). The counterbalance system support to balance the camera or other rigs (Maximun Weight: 1-8 kg/2.2-17.6lb) and ensure that it can be firmly positioned at any tilt angle, providing an extremely smooth shooting experience. | Adjustable Step-Less Damping System: The video fluid head features the adjustable step-less damping system t, which can accurately adjust the rotation and tilt damping force to provide smooth pan and tilt camera movements. It support tilte +90° or -60° tilte and 360° swivel for multi-angle stable shooting. | Compact and Rubust: The video head features (15cm / 5.5inch) in height and weighs only 1.9kg / 4.2lb, but it can carry a payload up to 8kg / 17.6lb. CNC-machined aircraft-grade aluminum tripod head, making it durable.The tripod head also comes with one 1/4"-20 threaded hole to support the magic arm or other accessories. | Quick Mode Switching: The DH12 fluid head adopts a new Touch-and-Go quick release mount plate design which does not require alignment and is more efficient than traditional slide-in plates. It is compatible with quick release plate for DJI RS Series and quick release plate for Manfrotto, realizing a free switch between stabilizer shooting and tripod shooting. | Detachable Telescopic Handle: It is equipped with a user-friendly detachable telescopic handle, allowing rotation and attaching it to both the left and right sides, making it suitable for any grip. The handle adjusted length is 35 - 53 cm / 13.8 - 20.9in.

Wide Compatibility: This LP-E6NH dummy battery replaces for Canon LP-E6NH and works for Canon R , R5 , R6 , R5 C , R7 , R6 Mark II, 5D Mark II / III / IV, 6D , 6D Mark II , 7D , 7D Mark II , 60D , 60Da ,70D , 80D , 90D , XC10 , XC15 , 5DS , 5DSR cameras | Continuous Power Supply: A dummy battery allows you to use the D-TAP plug-in to continuously power your camera from an external power supply. This means that you don't have to worry about changing the battery or the battery overheating and losing power because of recording for a longer time. It is a good choice for video conference, live streaming, time-lapse photography, live broadcast, extending studio sessions, uploading files to PC and more | Easy to Use: This LP-E6NH dummy battery works well with most of V-mount battery on the market with the D-TAP output. And also compatible with SmallRig V-mount battery VB50(Asin:B0BQLV3W1F), VB99(Asin:B0B6Z9K42P), VB155(Asin:B0B6ZCNF1P) | No Warning: Fully decoded battery, you don't have to worry about the warning pop-up that the battery will damage the camera, same size as the original LP-E6NH camera battery, so there is no need to worry about it getting stuck | Safe & Reliable: Overvoltage, overheating, and overcharge short-circuit protection alongside fire-resistant PVC and ABS make this item safe and reliable

Wide Compatibility: This NP-FZ100 dummy battery replaces for Sony NP-FZ100 and works for Sony Alpha A9, A9II, A7R III, A7R IV, A7 III, A6600, A7R II, A7S III, A7S II, A7C, A1, FX3, A7 Ⅳ, A7R V, ZV-E1 cameras | Continuous Power Supply: A dummy battery allows you to use the D-TAP plug-in to continuously power your camera from an external power supply. This means that you don't have to worry about changing the battery or the battery overheating and losing power because of recording for a longer time. It is a good choice for video conference, live streaming, time-lapse photography, live broadcast, extending studio sessions, uploading files to PC and more | Easy to Use: This NP-FZ100 dummy battery works well with most of V-mount battery on the market with the D-TAP output. And also compatible with SmallRig V-mount battery VB50(Asin:B0BQLV3W1F), VB99(Asin:B0B6Z9K42P), VB155(Asin:B0B6ZCNF1P). | No Warning: Fully decoded battery, you don't have to worry about the warning pop-up that the battery will damage the camera, same size as the original NP-FZ100 camera battery, so there is no need to worry about it getting stuck | Safe & Reliable: Overvoltage, overheating, and overcharge short-circuit protection alongside fire-resistant PVC and ABS make this item safe and reliable

Compatibility: Compatible dual rod system. SmallRig MD2802 is designed for mounting the battery on the rig more conveniently. | Dual 15mm Rod: Features a standard dual 15mm rod which can be easily mounted on a railblock or a shoulder pad with dual rod clamp like the VCT-14 Shoulder Plate 1954. | Work with Battery Plate: It should be used with a battery plate like V Mount Battery Plate 1846 and MD2801 with the battery. | Angle-adjustable: The angle of the hinge is adjustable and can be locked at will on your shoulder rig. | Multiple 1/4" Holes: There are many 1/4-20 threaded holes on the hinge for mounting other accessories.

For Sony Alpha 6700: SmallRig Dual Cold Shoe Mount Plate 4339 is designed to add cold shoe mounts to attach microphone, LED video light, etc. for Sony Alpha 6700. It is the simplest solution to mount your vlogging mic or light. | Stable and Anti-twist Design: SmallRig Plate 4339 is firmly connected to the camera with two M2.5 screws and the shoulder strap holes on both sides. Note: Please remove the strap ring on both sides of the camera before installing this plate. | Multiple Mounting Points: Giving full access to camera hot shoe, the plate 4339 comes with two built-in cold shoe mounts for attaching microphone and LED video light at the same time, as well as additional holes for shoulder strap. | Essential for Vlogging: SmallRig 4339 is a good solution if you intend to attach a microphone and vlog yourself. With its lightweight and compact design, it provides the perfect solution for mounting your microphone or light. | Lightweight: The lightweight plate is designed to keep your setup simple so that you can hold it on the camera all the time

【FOR DJI RS Series】SmallRig Dual Handgrip 3027 is specially designed for DJI RS 4 / RS 4 Pro / RS 3 / RS 3 Pro / RS 2 / RSC 2, which can work with some extra comfort and stability when shooting. Enabling you to hold your gimbal with both hands, this handgrip is designed to reduce arm fatigue, especially during long shooting sessions. | 【INSTALLATION】By using NATO clamps, the dual handgrip secures to the NATO rail on each side of the gimbal, easy for detachment and time-saving. | 【DUAL NATO RAILS】The handgrip is designed with two-side NATO rails, which is not only horizontal adjustable, but also easy for detachment and support shooting in inverted mode. | 【DISASSEMBLES FOR STORAGE/TRANSPORT】The matte surface perfectly matches the industrial design of the gimbal. It disassembles into four part for easy storage and transport. Anti-removal stud to secure the accessory from falling by accident. | 【MULTIPLE MOUNTING POINTS】Built-in multiple 1/4"-20 and for ARRI 3/8"-16 threaded holes allow you to easily mount separately available accessories. For example, you could attach Magic Arm for monitor. Cold shoe ports and NATO rails can be used for Monitor Mount 2905, wireless go, microphone, sound receiver, etc.

【Composite, Aluminum & Wood Grain Design】SmallRig Modular Follow Focus F60 3850 is designed to control your lens focus with smooth, fine adjustments in video shooting. It's core drive is made of environmentally friendly brass and super composite material, enables fine-tune adjustment for an improved experience. | 【Streamlined Mounting】You can mount this follow focus onto your rig using the included 15mm rod clamp. It is compatible with most lenses, including standard cine lenses using its 0.8 MOD gear, and focus gear ring, M0.8-65T Gear (ID: 3200) and M0.8-38T Gear (ID: 3285) . It can also be used with the M0.8-43T gear for smoother focus pulls on mirrorless / DSLR lenses. Note: The included silicone gear only supports SLR / mirrorless lens. Just remove it before using a cinema lens. | 【Non-Stop Damping】SmallRig 3850 supports lenses of various damping, thanks to an innovative, adjustable non-stop damping system. The adjustable dynamic damping adjustment from 0.6kgf to 1.8kgf, accommodates different diameter lenses, for perfect focusing control. | 【Quickly Switch & Detachable Palm Support】This follow focus basic kit features one-button pull design and a 3-step A/B stop function to set direction reverse or forward, or it can rotate 360° when controlling a zoom lens. It also features a quick-release palm support that ensures stability in shooting handheld. | 【Modular Design】Its modular accessories include Silicon Gear (ID: 3852), which directly drives lens focus by friction (Note: To avoid gear slippage, please ensure the silicone gear fits tightly with the lens ring, particularly for large-damping zoom lens), and optional Single & Dual 15mm Rod Clamp (ID: 4151), Focus Adapter Part (ID: 3851), and Quick Release Plate (ID: 3853), all compatible with SmallRig accessory system. Besides, it can also work with standard joystick and focus whip. | 【What In the Box】Follow Focus x 1 (Included M0.8-43T Gear x 1) , Quick Release Arm x 1, Silicone Gear x 1, Φ15mm Rod x 1, Rod Clamp (with NATO rail) x 1, Snap-on Gear Ring x 1, Palm Support x 1, Screwdriver x 1, Carrying Bag x 1

【SPECIAL PURPOSE】SMALLRIG DSLR Monitor Holder Mount 2100 allows an easy and fast adjustment of monitor viewing angle and enables the cameraman to have better monitoring as per the needs in different shooting scenarios. | 【160° ROTATION ADJUSTMENT】Rotation axis enables SMALLRIG DSLR monitor holder mount to adjust the position of monitor up to 160° with only one hand for better monitoring as per your needs at different directions during shooting. | 【QUICK RELEASE】 SMALLRIG camera field monitor Bracket can be secured with thumb screw or hex spanner through the tightening of the 1/4'' threaded screw on the top. Quick release on any cage with NATO rail, such as SMALLRIG a6300 / a6500 Cage 1889 or SMALLRIG Safety Rail 1195. It could be locked tight with the red locking lever quickly. | 【STRUCTURE】 This camera field monitor compatible with both 5'' and 7'' monitors. The ultra-compact structure features height of 46mm only. Rubber cushion on the top is utilized to prevent the monitor from any scratches and damages. Two M5 screws are applied for damping based on the weight of monitors. | 【PLEASE NOTE】The maximum load of this item is 1.5kg

Upgraded Version: SMALLRIG 2905B is an upgraded version monitor mount. It is designed to support 5” and 7” camera monitors via cold shoe on top of camera cages or handles | Upgraded Version: SMALLRIG 2905B is an upgraded version monitor mount. It is designed to support 5” and 7” camera monitors via cold shoe on top of camera cages or handles | Anti-Twist Design: The camera monitor holder bulid in bouncy locating pins on the top to futher secure Ninja V/ V+, and silicone pad to prevent the monitor from scratching and twisting | Wide Compatibility: Features cold shoe adapter at the bottom to connect camera cage, 1/4"-20 threaded hole for magic arm or stabilizer. 1/4"-20 screw on the top support monitor, microphone, light, etc | Note: Different tilt angle has different load capcaity, 90° load capacity＜9.3 lbs; 45° tilt load capacity＜5.5 lbs, 30° tilt load capacity＜5 lbs. For the safety, please do use the Allen Wrench to re-tighten the 1/4'' knurled screw for further security

More Durable Tilt Axis: The swivel and tilt monitor mount supports 180° tilt and 360° swivel adjustment, you can quickly adjust the tightness of the tilt axis through the knob. The attenuation rate after 10,000 times of tilt adjustment is less than 20%. | Hand-Tighten Knob: The monitor holder adds a hand-tighten knob, so that the tightness can be quickly adjusted by your hand, and it also has a wrench reinforcement hole for easy disassembly and assembly with the included Allen wrench. | Stronger Load-Bearing Capacity: Maximum load-bearing: 90° < 4.2kg, 45° tilt < 2.5kg, 30° tilt < 2.3kg. Excellent weight capacity makes it suitable for almost all 5" & 7" monitors. | Double Anti-Deflection Design: The top of Field Monitor Mount 2906B has a built-in spring-loaded positioning post and a silicone gasket, which is designed for Ninja V / V+ monitors to prevent deflection. | Quick-Release NATO Clamp: The NATO clamp mount can be used with standard NATO rails, such as SmallRig 1409/2172, which can realize quick disassembly and assembly, and makes your shooting more efficient and time-saving.

【Only For Mini Matte Box】SmallRig filter tray 3320 is an optional accessory which works with SmallRig mini matte box, lightweight and easy to store. It prevents plug-in filters from minor bumps. If the dimension of your filter is (4 x 5.65") please buy SmallRig filter tray 3319 | 【Fits 4 x 4" Filters】This filter tray bracket allows for quick installation of 4 x 4" plug-in filters of 4 mm in thickness. With this filter tray, you're no longer to worry about leaving scratches and fingerprints when you're replacing the filters, its bezels will help to solve your troubles | 【Quick Release】The filter tray holder 3320 can be quickly and smoothly mounted and removed to the matte box via a NATO clamp, and when you hear a "click" that means that the tray holder has been installed and fixed | 【Stackable Design】The filter frame is stackable, it supports multiple filters at the same time, therefore you can have a free filter combination according to your shooting needs | 【Note】This Filter tray is not compatible with 100 x 100 mm filters. And generally speaking, you can use two kinds of SmallRig filter tray(for 4 x 4" and 4 x 5.65") at the same time, but make sure to install the filter tray (4 x 4") at first, otherwise the vignetting will appear

【FOR BMPCC 6K Pro / 6K G2】SmallRig Full Cage 3270 is specially designed for BMPCC 6K Pro / 6K G2. It would not block any buttons on the camera. It can also be disassembled and used as a half cage. It fits the body perfectly, hence a comfortable grip experience. | 【ANTI-TWIST FUNCTION】Highly secure via a 1/4"-20 screw on the top and two on the bottom to prevent wiggles and comes with rubber pads at the bottom to prevent scratching. Lightweight design with only 300g, the cage is made of aluminum alloy, with matte surface and strong oxygen resistance. | 【MULTIPLE MOUNTING POINTS】It is equipped with multiple mounting points, such as 1/4" & 3/8" threaded holes, cold shoes, NATO Rail and locating holes for ARRI, allowing you to connect more accessories such as SmallRig Quick Release Nato Rail 1409 and Smallrig Top Handle 2362, etc. Bottom Slot for Samsung T5 SSD and suits HDMI & USB-C cable clamp to ensure stability and smooth data transmission while shooting. | 【FEATURED RECOMMENDATIONS】It could attach Swivel and Tilt Adjustable Mount/Holder 2903 & 2904 for the monitor. Locating holes for ARRI on the top are compatible with Top Handle 2165 for handheld shooting, or it could be mounted with NATO Rail Handle 2270 & 2187 for better shooting. It could be mounted with HDMI & USB-C Cable Clamp 3271 and T5 SSD Mount 3272 to improves compactness. | 【BOTTOM STRUCTURE】SmallRig Cage 3270 incorporates multiple threaded holes on the bottom to attach Quick Release Plates 1280 & 2146 and RS2 stabilizer and a built-in spanner for easy disassembly.

New Version: The new version of cage 3212B fits better for Sony A7C, increases the space in front of the hot shoe, solves the problem of incompatibility with the microphone ECM W2BT, flash HVL F32M. Also it broadens the dummy battery cable port and the positioning at the bottom pin wrist strap hole. Now you don‘t need to remove the triangle loop from the camera strap on the right if you don’t use the side lock | Ergonomic Silicone Grip: This a7c cage comes with an integrated silicone grip that is ergonomically designed to improve the grip experience. This silicone grip is removable, remove the grip, you will find the new version cage is more compact, the spacing between camera body and cage is much smaller than the old version | Redesigned Side Locking: The cage is locked with a 1/4"-20 screw on the bottom of the camera and comes with rubber pads to prevent scratching. To prevent twisting, you can also use the right side lock by pressing the slider up and attach the attached small screw to the strap hole of the camera | Multiple Mounting Points: The a7c cage features multiple 1/4''-20 threaded holes and 3/8" -16 locating holes for ARRI, allowing to mount SMALLRIG Top Handle 2165, Cold Shoe Extension 2879 and Tripod BUT2664 for vlog shooting. A built-in cold shoe suits microphones, LED lights. The built-in bottom plate for Arca-type can directly connect DJI RS 2 / RSC 2 / RS 3 / RS 3 Pro gimbal | Screwdriver Included: Come with a screwdriver on the bottom of the cage for tightening the camera screws. It is convenient to you install and release

Improved Design: 1. A cold shoe is added to the upper right corner of the cage to facilitate the installation of accessories such as Microphone 3468 and LED Video light 3286; 2. Two 1/4"-20 threaded holes with a spacing of 18mm are added at the bottom, which is compatible with SmallRig Quick Release Plate for Arca 3154. A QD hole is added at the bottom, which is compatible with QD quick release shoulder straps and other accessories. | For Sony A7R V/A7 IV/A7S III/A1/A7R IV: SmallRig Cage 3667 is designed for Sony A7R V, A7 IV, A7S III, A1, A7R IV to facilitate low-angle shots and protect the camera while offering a wide range of accessory mounts. NOTE: The HDMI Cable Clamp 3000 is not compatible with Alpha 1 and Alpha 7R IV because it will block the synchro terminal interface when used on the Alpha 7R V. | Multiple Mounting Points: The cage has multiple 1/4"-20 holes and 3/8"-16 positioning holes for ARRI, which can attach accessories such as the upper handle 3765, the side handle 2093, and the monitor stand 2903B. There are 2 built-in cold shoe interfaces, which can install microphones, fill lights and other equipment; the QD hole at the bottom is compatible with QD shoulder straps. Holes are reserved on both sides and bottom of the cage to attach Wrist Strap PAC2456 and Shoulder Strap PSC2428. | Three-Point Locking: A positioning pin is added at the bottom of the cage, and the 1/4"-20 screw and the left M2.5 screw form a three-point locking to make the camera stable. Adjust the direction of the left locking slider to adapt to different models, [A7 IV] side is suitable for Alpha 7 IV and Alpha 7R V, [A7S III/A1] side is suitable for Alpha 7S III / Alpha 1 / Alpha 7R IV | All-Round Protection: Built-in all-round rubber gasket to prevent scratches. With the cage installed, the camera interface, dials, buttons and changing batteries are not affected. The opening and closing wrench design is added to the position of the battery compartment, which fits the curve of the fuselage more, solves the problem of placing the little finger, and enhances the grip of the fuselage. | Built-in Quick Release Plate: The bottom quick release plate for Arca has added 1/4"-20 holes with a spacing of 18mm, which is compatible for DJI RS 2 / RSC 2 / RS 3 / RS 3 Pro, and can also be adapted to DJI RS 2 / RSC 2 stabilizer mounting board (riser plate) and SmallRig Quick Release Plate for Arca 3154. | Power Backup Solution: SmallRig NP-FZ100 camera battery charger set is available now, two 2040mAh(Real) rechargeable batteries and a charger brings long battery life for your videos and photos shooting, if you need a sufficient power supply, please search SmallRig NP-FZ100 Battery 3824

Compatibility: This camera handheld cage kit is specialize design for Sony FX3 / FX30 to protect camera and provide accessory mounting points. The NATO Rail is fixed by two 1/4"-20 screws, and can be compatible with the original XLR after disassembly; the U-shaped cage module is fixed by 1/4"-20 screws on both sides and the bottom, which is stable and does not deflect. The kit includes a cage, NATO Rail, XLR handle extension, cable clamp for HDMI and wrist strap. | Patented HawkLock QR Structure: The self-developed HawkLock structure covers the cold shoe, NATO Rail and plate for Arca-Swiss, which can used with HawkLock eco-accessories to achieve smooth sliding in and self-locking to improve the efficiency of disassembling and reassembling, and it is also compatible with the traditional cold shoe, NATO Clamp, and clamp for Arca-Swiss. | XLR Handle Extension: This FX3 / FX30 advanced cage kit comes with XLR handle extension, which is ergonomically designed to enhance the grip and strength of the original XLR top handle for easy expansion of accessories. Load-bearing capacity of up to 20kg/44lbs. Please remove the top NATO rail before installing the original XLR handle. | Wrist Strap & Cable Clamp: This professional cage kit for FX3 / FX30 comes with wrist strap to improve the stability of handheld shooting and prevents the device from slipping during handheld shooting. And also equipped with a dedicated cable clamp for HDMI to protect interface to ensure the signal stability during shooting. | Multiple Mounting Points: The cage is built-in 1/4“-20 threaded holes, 3/8”-16 locating hole for ARRI, 1/4”-20 locating holes, QD socket, strap slot, and can be expanded with accessories such as Magic Arm (ID: 3873), Top Handle (ID:3765), Rod Clamp (ID:3598), QD Shoulder Strap, Hand Strap (ID:3848), and Shoulder Strap (ID:PSC2428) for professional creation.

【FOR SONY FX3 / FX30 XLR】SmallRig FX3 / FX30 XLR Handle Extension Rig 3490 is designed to extend the length of the FX3 / FX30 XLR handle and add more accessory mounting interfaces. | 【30mm HANDLE EXTENSION】The handle extension rig is installed at the end of the FX3 / FX30 XLR handle by a 1/4"-20 screw, which can extend the handle back by 30mm. | 【QUICK RELEASE NATO RAIL】The handle extension rig is equipped with a NATO rail, which is installed on the top of the FX3 / FX30 XLR handle by two 1/4"-20 screws. It provides more accessory installation interfaces for shooting scenes so that you can quickly install or release monitors, EVF, etc. | 【MULTIPLE MOUNTING THREADS】The extension rig has a cold shoe, multiple 1/4"-20, 3/8"-16 screws and locating holes for ARRI standard, so it can provide multiple accessory mounting interfaces for shooting. | 【COMFORTABLE & DURABLE DESIGN】The extension rig features beautiful and practical ergonomic design, and it is made of super tough and lightweight aluminum alloy, anti-oxidation, scratch-resistant. | 【Power Backup Solution】SmallRig NP-FZ100 camera battery charger set is available now, two 2040mAh(Real) rechargeable batteries and a charger brings long battery life for your videos and photos shooting, if you need a sufficient power supply, please search SmallRig NP-FZ100 Battery 3824

Compact FX6 Cage - SmallRig FX6 Rig Kit is a lightweight and compact cage designed for videographers who prefer shooting on various scenarios such as tripods, handhelds, and shoulder rigs, etc. This complete FX6 cage kit solution provides both protection and attachment points for accessories. | With a Slidable V-Mount Battery Plate - Equipped with a V-mount battery plate and a cable that quickly switches among different scenarios without repeatedly disassembling and installing batteries. The V-mount battery plate supports slide up and down without blocking the memory card and BP-U battery installation. | Both V Mount and BP-U Battery Are Compatible - When using both, please note that the BP-U battery needs to be installed before the V-mount battery when installing, and the V-mount battery needs to be removed before the BP-U battery when uninstalling. | Dual Position Mounting Side Plate - The side plate is compatible with the original control grip when mounted on the rear, making it easy to expand your accessories, such as microphones and image transmitters. When mounted on the front, it can easily balance the center of gravity when shooting vertically. | Multiple Mounting Points - The FX6 cage includes built-in 1/4''-20 locating holes (same as those in the camera), 1/4"-20 threaded holes, 3/8"-16 threaded holes, 3/8"-16 locating holes for ARRI, and a cold shoe mount for the microphone, image transmitter, monitor, etc.