A high-quality, high-performance bandstop filter designed for software defined radio (SDR) applications. Includes free male SMA-male SMA barrel connector! | Flamingo FM was designed to provide approximately 40dB attenuation for broadcast FM frequencies, while ensuring that adjacent bands are minimally affected. The -3dB rolloff of the filter is 80MHz and 115MHz, which means the VHF airband (108-13

Everything you need to get started with 2.4GHz development, including Ubertooth One module installed into a custom shielded aluminum enclosure and a 2.4GHz duck antenna! | All bundle components covered under warranty for 1 year, directly through Nooelec | Ubertooth One is a configurable 2.4GHz transceiver with great application software and support; and with suitable transmit power and receive sensitivity for 2.4GHz development | Standard Cortex Debug Connector (10-pin 50-mil JTAG) In-System Programming (ISP) Serial Connector | Expansion connector intended for inter-Ubertooth communication or other future uses

Listen to ALL HF, down to 100kHz and below, with nearly any software defined radio!Listen to ALL HF, down to 100kHz and below, with nearly any software defined radio! Massively improved performance vs. any direct sampling hacks and implementations | Open-hardware design with full documentation available. Datasheet: https://www.nooelec.com/datasheets/100555 | Proudly made in the USA and Canada with high-quality components! Full 1 year warranty, direct through Nooelec | Antenna protection on the RF input, in-circuit in both enable and passthrough mode | Also available in a 'Plus' version, which includes a TCXO and frequency capability down to 300Hz. Product name: Ham It Up Plus Barebones, Amazon SKU: B076CYH6NL

Includes all hardware and software (free download) you need to get started with software defined radio! | Listen (and see!) nearly any RF signal within the frequency capability of the radio (27-1700MHz) | Included is an NESDR SMArt v4 RTL-SDR, 3 antennas, a "Flamingo FM" broadcast FM bandstop filter, 10 RF adapters and cables, and a carrying case | Proudly manufactured by Nooelec in the USA and Canada, with a full 2 year product warranty on all bundle components and 24/7 technical support availability. Please contact our support team any time if you have questions! | Amazon-exclusive bundle! Only available for a limited time

An ultra-low noise software defined radio, capable of receiving nearly ANY RF signal from approximately 25MHz-1700MHz. Includes SDR, high-quality antenna base, and 3 antenna masts to get you started right away without any further purchases! | Unmatched price & performance--redesigned PCB reduces noise by an average of a full 3dB! Includes all the same fantastic features as the rest of the NESDR SMArt series, including an ultra-low phase noise TCXO, with a guaranteed <0.5PPM tolerance out-of-the-box. This is at least 4x more accurate than units advertised as containing 1PPM TCXOs, which have up to a +/- 2PPM initial offset | Same form factor as the other devices in our NESDR SMArt series, which means no USB occlusion issues--run devices side-by-side without messy extension cables or adapters, even on embedded devices like the Raspberry Pi! | Always-on, 4.5V bias-tee with independent ultra-low-noise power supply and 250mA power capability allows you to power nearly any active antenna circuitry without messing around with drivers or software | Designed and manufactured by Nooelec in North America. Impeccable quality and full 2-year warranty!

An ultra-low noise software defined radio, capable of receiving nearly ANY RF signal from approximately 25MHz-1700MHz. Includes SDR, high-quality antenna base, and 3 antenna masts to get you started right away without any further purchases! | Unmatched price & performance--redesigned PCB reduces noise by an average of a full 3dB! Includes all the same fantastic features as the rest of the NESDR SM

An ultra-low noise software defined radio, capable of receiving nearly ANY RF signal from approximately 25MHz-1700MHz. Includes SDR only! For a full package with an antenna bundle, please see http://www.amazon.com/dp/B079C4S2BT | Unmatched price & performance--redesigned PCB reduces noise by an average of a full 3dB! Includes all the same fantastic features as the rest of the NESDR SMArt series, including an ultra-low phase noise TCXO, with a guaranteed <0.5PPM tolerance out-of-the-box. This is at least 4x more accurate than units advertised as containing 1PPM TCXOs, which have up to a +/- 2PPM initial offset | Same form factor as the other devices in our NESDR SMArt series, which means no USB occlusion issues--run devices side-by-side without messy extension cables or adapters, even on embedded devices like the Raspberry Pi! | Always-on, 4.5V bias-tee with independent ultra-low-noise power supply and 250mA power capability allows you to power nearly any active antenna circuitry without messing around with drivers or software | Designed and manufactured by Nooelec in North America. Impeccable quality and full 2-year warranty!

Premium RTL-SDR bundle includes NESDR SMArTee XTR in beautiful brushed aluminum enclosure, re-designed antenna base with 2m (6.5') RG-58 feed cable, and 3 antenna masts | A wide variety of improvements on other designs, including integrated 4.5V 250mA bias-tee, ultra-low phase noise 0.5PPM TCXO, 2 RF-suitable voltage regulators, custom heatsink, 2 silicone pads and SMA female connector | Designed from the ground up to reduce USB port occlusion. Run multiple NESDR SMArt series devices side-by-side with any USB-compliant device, including tightly-spaced embedded devices like the Raspberry Pi | SDR frequency capability approximately 65MHz-2300MHz. Frequency range can be extended down to 100kHz or lower with the Ham It Up, also available on Amazon (B009LQT3G6) | Proudly built by Nooelec in the USA and Canada! Full 2-year product warranty

Includes 2 NESDR Nano 2 SDRs. Each SDR is lab-calibrated and EEPROM-programmed for simple Stratux software setup | Also includes a pair of high-gain ADS-B antennas, tuned to 1090MHz and 978MHz, respectively. The antennas are appropriately silkscreened with their frequency for easy identification | Each SDR includes a calibration sticker and adhesive identification labels, which can be applied for easy identification of each SDR | Full 1-year warranty through NooElec on all bundle components | Please consider our NESDR Nano 3 Dual-Band bundle (Amazon SKU: B076GWF6FF). This bundle includes additional antennas and adapters, and also utilizes our Nano 3 SDR with aluminum enclosures for a higher-performing & safer ADS-B experience

High-quality custom black aluminum enclosure which will fit either the Ubertooth One or YARD Stick One from Great Scott Gadgets | The aluminum enclosure not only provides improved EMI shielding, but also fantastic physical protection for your investment | The solid aluminum enclosure does not have a product name on the outside, and occludes the view of the on-board LEDs, in order to maximize discreetness | Includes all hardware required for finished assembly, including color-matched screws. NOTE: Ubertooth & antenna are shown for reference only and are sold separately! | Designed and manufactured by NooElec in North America. Impeccable quality and full 2-year warranty!

High-quality aluminum enclosure provides EMI shielding and physical protection | Inconspicuous design and color scheme. Black enclosure has matching silkscreen; silver enclosure completely unbranded and unlabeled for those who wish to go 'incognito' | LEDs visible from exterior of enclosure | Does not occlude EMI shield frame, if installed (sold separate, see product ID B01IFAE0RK) | Includes all

Contains RTL2832U interface IC and the new, improved R820T2 tuner! This tuner has improved sensitivity and SNR compared to devices using the R820T. Unmatched price-performance. | Contains all the same improvements on the 'generic' design as were made on the popular and well-tested NESDR Mini, including higher-accuracy clock, low-ESR capacitors, high-Q inductors, and more! | 1-year warranty direct from Nooelec! With locations in both the US & Canada, and full technical support services, your investment is a safe and wise one. | Frequency capability is approximately 24MHz-1750MHz, with no gaps within that range. Expansion to HF, all the way down to 100kHz, is available with the Ham It Up upconverter (sold separately). | Free high-quality telescopic antenna, much improved over the older thin-whip style antenna. Turn on, tune in and...listen!

New! Redesigned for lower noise, better sensitivity and lower power consumption. | Design changes include RF-suitable 3.3v power supply with 1/10th of the noise of other SDRs, shielded power inductor for improved EMI rejection, and more! | A male MCX to female SMA adapter and strong magentic antenna suction mount included as standard. | R820T2 tuner provides substantial performance improvements over R820T-based devices | Full 2-year product warranty!

Included: Nooelec USB dongle & antenna | RTL2832U interface IC & R820T tuner IC on USB dongle | These are custom USB devices tuned for SDR and include much better components than generics (see description below) | Compatible with most SDR software packages; software & drivers may be downloaded freely from nooelec.com | Full 1-year warranty & installation support available!

No more blocked USB ports! This RTL-SDR was designed into a tiny form factor to ensure proper fit within the smallest USB-compliant spacing. The Nano 3 is just 17mm x 8mm x 20mm & 15g! | The high-quality aluminum enclosure and silicone pads ensure that heat and stray EMI stay where they belong | The included articulating SMA connector allows for connection of both male SMA and male MCX antenna typ

A full, wide-band RF solution for those interested in getting started with software defined radio and with a keen interest in HF bands | The NESDR SMArt HF Bundle utilizes a well-designed upconverter--the Ham It Up--to receive HF, NOT direct sampling hacks. This results in a vastly different HF experience--much better performance, and no loss of gain controls | Included is a Ham It Up v1.3 upconverter, installed in a custom black aluminum enclosure; an NESDR SMArt RTL-SDR, 3 antennas, an impedance matching balun for longwire and dipole antennas, and interconnect adapters | Proudly manufactured by Nooelec in the USA and Canada, with a full 2 year product warranty on all bundle components and 24/7 technical support availability. Please contact our support team any time if you have questions! | Amazon-exclusive bundle! Only available for a limited time. NOTE: enclosure colors may vary contingent on availability

Premium RTL-SDR bundle includes newly designed NESDR SMArt in beautiful brushed aluminum enclosure, re-designed antenna base with 2m (6.5') RG-58 feed cable, and 3 antenna masts. Proudly built by Nooelec in the USA and Canada! Full 2-year product warranty | A wide variety of improvements on other designs, including ultra-low phase noise 0.5PPM TCXO, RF-suitable voltage regulator, custom heatsink, 2 silicone pads and SMA female connector | Designed from the ground up to reduce USB port occlusion. Run multiple NESDR SMArt side-by-side with any USB-compliant device, including tightly-spaced embedded devices like the Raspberry Pi | SDR frequency capability approximately 25MHz-1700MHz. Frequency range can be extended down to 100kHz or lower with the Ham It Up, available on Amazon (Product ID B009LQT3G6) | An 8pc SMA adapter set and carrying case is also available on Amazon (Product ID B073JT98RR)

Premium Software Defined Radio 'NESDR SMArt' in a beautiful brushed aluminum enclosure. Proudly built by Nooelec in the USA and Canada! Full 2-year product warranty | A wide variety of improvements on other designs, including ultra-low phase noise 0.5PPM TCXO, RF-suitable voltage regulator, custom heatsink, 2 silicone pads and SMA female connector | Designed from the ground up to reduce USB port occlusion. Run multiple NESDR SMArt side-by-side with any USB-compliant device, including tightly-spaced embedded devices like the Raspberry Pi | SDR frequency capability approximately 25MHz-1700MHz. Frequency range can be extended down to 100kHz or lower with the Ham It Up, also available on Amazon (B009LQT3G6) | An 8pc SMA adapter set and carrying case is also available on Amazon (Product ID B073JT98RR)

Premium RTL-SDR bundle includes NESDR SMArt XTR in beautiful brushed aluminum enclosure, re-designed antenna base with 2m (6.5') RG-58 feed cable, and 3 antenna masts | A wide variety of improvements on other designs, including ultra-low phase noise 0.5PPM TCXO, 2 separate RF-suitable voltage regulators, custom heatsink, 2 silicone pads and SMA female connector | Designed from the ground up to reduce USB port occlusion. Run multiple NESDR SMArt series devices side-by-side with any USB-compliant device, including tightly-spaced embedded devices like the Raspberry Pi | SDR frequency capability approximately 65MHz-2300MHz. Frequency range can be extended down to 100kHz or lower with the Ham It Up, also available on Amazon (B009LQT3G6) | Proudly built by Nooelec in the USA and Canada! Full 2-year product warranty

Includes NESDR XTR, telescopic metal antenna & remote control | Contains E4000 tuner, frequency capability of approx. 55MHz- 2300MHz (w/ L-Band gap) | HF-capable down to 100kHz with Ham It Up (sold separately) | Superb quality components, assembly & construction; RoHS compliant | Works with all RTLSDR-compatible software, including MATLAB

SAWbird+ GOES is a self-contained LNA module designed for capturing beautiful weather images available from NOAA GOES satellites | The module uses 2 ultra-low-noise LNAs and a custom high-performance SAW filter centered at the frequency of interest | The amplifier can be powered in 3 ways: via bias tee, through the on-board microUSB connector, or through DC barrel connector with the included USB to DC connector adapter | Though compatible with most SDRs, we recommend use in conjunction with NESDR SMArTee XTR v2 (available on Amazon, item ID B06Y1GN5RP) | Includes free male SMA to male SMA adapter and USB to DC barrel connector adapter. Full 2 year warranty and support direct through Nooelec!

SAWbird+ H1 is a self-contained LNA module designed for hydrogen line detection and similar 21cm band experimentation | The module uses 2 ultra-low-noise LNAs and a custom high-performance SAW filter centered at the frequency of interest | SAWbird+ H1 can be powered in 3 ways: via bias tee, through the on-board microUSB connector, or through the on-board female header | Made in North America with love. Full 2 year warranty and support direct through Nooelec!

A great addition to any radio or software defined radio with female SMA input, including our NESDR SMArt series and HackRF | 8 male SMA adapters in total, allowing you to connect the following antenna types to your radio: N-connector, F-connector (aka 'Coax'), SO-239 (aka 'UHF' or 'PL-259'), BNC, MCX, PAL, RP-SMA, and SMA (female). Full list in description below | A convenient carrying case is included. Great for field use! Ample room to house your NESDR SMArt or NESDR Nano SDR | 50 Ohm, low-loss adapters--lower loss than any RF cable adapters | NOTE: RP-SMA looks similar, but is not the same! These will not work for RP-SMA. RP-SMA is generally only used for things like WiFi equipment, not radios, but if you are unsure please contact our support team for assistance

Heavy-duty, wide-band premium antenna bundle for RTL-SDR and other SMA radios. Long 2m (6') cable made with low-loss RG-58 | Includes antenna base and 3 antenna masts--helical, DVB-T2 and telescopic--for wideband reception. Specially designed for wideband software defined radios | Male SMA connector on antenna cable for easy connectivity to all 50Ω SMA-input radios like our NESDR SMArt series and HackRF One | Redesigned for 50Ω to maximize compatibility with commonly used radios and to reduce SWR mismatches. The base has been redesigned to improve ground plane coupling and shielding over v1. | Antenna base is constructed from heavy-gauge metal for resilience and longevity. Includes full 1 year warranty direct from Nooelec!

Kit contains a 1090MHz SMA antenna, a 978MHz SMA antenna, and 2 male MCX to female SMA pigtail cables | Perfect for embedded, portable or ground ADS-B applications where weight, size and range are all concerns. | Antennas have foldable hinges for a multitude of mounting options | Compatible with any SDR with SMA or MCX input connector | Pigtail cables are made from quality RG316 and kept to 6" in length to minimize loss

Comes with all hardware required for finished assembly, including color-matched screws and rubber feet for non-slip usage | Enclosure is laser-engraved with logo and labels, to ensure permanency | NOTE: Ham It Up Plus Barebones circuit board is sold separately and is NOT included! | Designed and manufactured by NooElec in North America. Impeccable quality and full 2-year warranty!

Ubertooth One is an Open Hardware project which can both transmit and receive at 2.4GHz with suitable transmit power and receive sensitivity. | A suitable antenna should be affixed to the female RP-SMA port. A 2.4GHz 'rubber duck' style antenna is included, along with an RP-SMA to SMA adapter so you can attach other SMA antennas of your choosing | Contains a standard Cortex serial debug connector (10-pin 50-mil JTAG) for in-system programming (ISP) | Also contains an expansion connector intended for inter-Ubertooth communication and other future uses. | Warranty and support services available directly through Nooelec!

Premium software defined radio NESDR SMArt XTR in a beautiful silver brushed aluminum enclosure | A wide variety of improvements on other designs, including ultra-low phase noise 0.5PPM TCXO, 2 RF-suitable voltage regulators, custom heatsink, 2 silicone pads and SMA female connector | Designed from the ground up to reduce USB port occlusion. Run multiple NESDR SMArt series devices side-by-side with any USB-compliant device, including tightly-spaced embedded devices like the Raspberry Pi | SDR frequency capability approximately 65MHz-2300MHz. Frequency range can be extended down to 100kHz or lower with the Ham It Up, also available on Amazon (B009LQT3G6) | Proudly built by NooElec in the USA and Canada! Full 2-year product warranty.

Included RTL2832U and R820T tuner ICs on the USB device | Nooelec guarantees a protection diode on the input to protect from ESD damage | Compatible with most SDR software, including SDR#. Provides an approximate tuning range of 27MHz-1700MHz for software defined radio (SDR) | Includes Nooelec USB SDR and antenna | Full 1-year warranty against manufacturer's defects!

SAWbird+ 2m is a self-contained LNA module designed for 2-meter ham band applications | The module uses 2 ultra-low-noise LNAs and a custom high-performance SAW filter centered at the frequency of 145MHz (142-148MHz) | SAWbird+ 2m can be powered in 3 ways: via bias tee (with a current capability of 200mA or higher), through the on-board microUSB connector, or through the on-board female header | Though compatible with most SDRs, we recommend using the module in conjunction with NESDR SMArTee (available on Amazon, product ID B079C4S2BT) | Full 1 year warranty and support directly through Nooelec!

This product is designed to massively increase plane tracking signal strength (SNR) compared to competing products. Drastically outperforms all available, low-cost ADS-B amplifiers and filters! | SAWbird+ ADS-B increases SNR, and therefore signal range, by providing an industry lowest-in-class noise figure (0.9dB or lower) and substantial gain (34dB or higher) for BOTH ADS-B and UAT applications | Your purchase includes a fully assembled SAWbird+ ADS-B module pre-installed into a beautiful black custom aluminum enclosure, two male to male SMA adapters, and a micro USB to DC barrel connector adapter cable | Both sides of the device offer a bias tee power option (3 to 5V DC and 140mA or higher current availability). Alternatively, a micro USB port is available to provide external power when bias tee power is unavailable or unsuitable | Exceptional out-of-band rejection levels of +85dB for cleaner signals | 50Ω matched input/output for optimal signal transfer | Proudly made in North America, ensuring exceptional quality and reliability. Backed by a generous 2-year warranty for peace of mind | For more information review the product page or datasheet: https://www.nooelec.com/datasheets/100847

SAWbird+ H1 is a self-contained LNA module designed for hydrogen line detection and similar 21cm band experimentation | The module uses 2 ultra-low-noise LNAs and a custom high-performance SAW filter centered at the frequency of interest | SAWbird+ H1 can be powered in 3 ways: via bias tee, through the on-board microUSB connector, or through the on-board female header | Made in North America with love. Full 1 year warranty and support direct through Nooelec!

SAWbird+ IR is a self-contained LNA module designed for capturing L-Band signals, particularly from Iridium and Inmarsat satellites | The module uses 2 ultra-low-noise LNAs and a custom high-performance SAW filter centered at the frequency of interestThe module uses 2 ultra-low-noise LNAs and a custom high-performance SAW filter centered at the frequency of interest | The amplifier can be powered in 3 ways: via bias tee, through the on-board microUSB connector, or through DC barrel connector with the included USB to DC connector adapter | Though compatible with most SDRs, we recommend use in conjunction with NESDR SMArTee (available on Amazon, item ID B079C4S2BT)Though compatible with most SDRs, we recommend use in conjunction with NESDR SMArTee XTR v2 (available on Amazon, item ID B06Y1GN5RP) | Includes free male SMA to male SMA adapter and USB to DC barrel connector adapter. Full 2 year warranty and support direct through Nooelec!