Type - UHF male to UHF male adapter. Used to connect two uhf cb radio connector or uhf coax cable together. Easy to install. | Low Loss Low SWR - The attenuates signal of this cb radio connector is less than 0.1db. VSWR< 1.15(DC-1G). Made of brass copper and teflon insulator for a reliable signal every time. Neither measurable swr increase, nor signal loss. | Sturdy & Well Made - This pl259 male to male adapter is made of brass copper body and teflon insulator for a good connectivity and reliable signal every time. Heavy duty and water proofing body to secure them fits well and seals tightly. Durability :≥ 1000 times mating life time. | Professionally Made: MOOKEERF as pl-259 male adapter manufacturer, each uhf male adapter swept with USA KEYSIGHT E5071C ENA network analyzers. We are confident with the quality and offer 12 months warranty and 100% satisfaction guarantee. | Applications - Suitable for join pl259 adapter cable and device indoors and outdoors. Applicable to CB HAM Radio, VHF Radio, Antenna, SWR Meter, Antenna Analyzer, Amateur Radio etc.

【Type】: UHF male crimp connector, PL259 crimp connector 10 packs, suitable for connecting with UHF female connector. | 【 Crimping Cable Type 】: PL259 coax connectors RG58 works great for RG58, RG400, LMR195 3D-FB low loss cable or similar type RF cable. | 【Durable】: UHF male crimp connector, composed of copper gold-plated needle and copper nickel-plated shell,an it with good conductivity and corrosion resistance. | 【Low Loss】: The PL259 UHF crimp connector has a signal loss of less than 0.1db on 450HMz, and the SWR <1.15. It can be assembled with coaxial cable into a low-loss jumper. | 【Installation】: The package is equipped with 10 PL259 Male crimp connectors and heat shrink tube mounting kits, which is easy to install.

Low Loss: The loss of 15ft rg58 TNC coaxial cable at 450MHZ signal frequency is less than 1.35dB and the SWR ≤ 1.2. There is no need to worry about signal loss for long-distance high-frequency use. | Good Structure: The inner conductor of this rg58 tnc cable is made of solid copper, the outer conductor is made of bonded Aluminum foil and tinned copper braid to keep the signal unobstructed and prevent signal leakage. | Prevent Coming Off: Connection between rg58 cable end and TNC male connector is equipped with a 2.2" heat shrink tube and built with adhesive, which is longer than ordinary cables.It could support professionally connection between cable and adapters and prevent connector pull out. | Durable: The cable sheath is made of PVC,which is waterproof and flexible.The shell of the tnc connector is made of high-quality copper nickel plated,which could be better in resist oxidation and corrosion.It could work in outdoor harsh environments. | Widely Used: RG58 TNC 50 Ohm cable, suitable for GPS Navigation Antenna Extension Cable,RTK Surveying Antenna,4G LTE Cellular Wireless Router Modem Antenna ,Wireless mic System.

Low Loss: The loss of 25ft rg58 TNC coaxial cable at 450MHZ signal frequency is less than 2.1dB and the SWR ≤ 1.2. There is no need to worry about signal loss for long-distance high-frequency use. | Good Structure: The inner conductor of this rg58 tnc cable is made of solid copper, the outer conductor is made of bonded Aluminum foil and tinned copper braid to keep the signal unobstructed and prevent signal leakage. | Prevent Coming Off: Connection between rg58 cable end and TNC male connector is equipped with a 2.2" heat shrink tube and built with adhesive, which is longer than ordinary cables.It could support professionally connection between cable and adapters and prevent connector pull out. | Durable: The cable sheath is made of PVC,which is waterproof and flexible.The shell of the tnc connector is made of high-quality copper nickel plated,which could be better in resist oxidation and corrosion.It could work in outdoor harsh environments. | Widely Used: RG58 TNC 50 Ohm cable, suitable for GPS Navigation Antenna Extension Cable,RTK Surveying Antenna,4G LTE Cellular Wireless Router Modem Antenna ,Wireless mic System.