Connectors: 1x 5.5*2.1mm Female, 2x 5.5*2.1mm Male | Length: 32cm / 12.5 inches (end to end) | Wire: pure copper | Voltage Range: 5-48V | Max Current: 8A

Convert a 6-pin PCIe Power connector to an 8-pin PCIe Power Connector | Connectors: 6-pin PCIe Power Female, 8-pin PCIe Power Male | Length: 5-Inches | Wire: 18 AWG

Connectors: 6-pin Mini PCIe Power Male, 6-pin PCI-e Power Male | Length: 11.5 inches / 29cm (including connectors) | Wire: 18 AWG

Weight: 1.0g/tube | Operation Temperature: -50/180°c | Thermal Conductivity: >3.17W/m.k | Thermal Resistance: <0.067°c-in2/w | 20% metal oxide compounds

Inject power into an Ethernet cable in order to provide both power and data over a single cable | Simplify the installation of a WLAN AP, IP phone, IP Camera, or any other 802.3af passive POE capable device | Plugs into a standard 120V wall outlet • Works with standard Cat5, Cat5e, or Cat6 Ethernet cable | 2 RJ45 Connectors: Standard Ethernet data input, Passive 802.3af mode B Output (100Mbps Ethernet data + always on power) | Ethernet Pin Usage: Data: 1,2,3,6 Power: +(4,5),-(7,8) • Dimension: 3¼" x 1¾" x 1½"

Connectors: 5.5x2.1mm Female Barrel, bare wires | Length: 30cm / 12 inches (excluding connector) | Polarity: Center positive, Red (+) / Black (-)

Connect an M.2 NVMe and/or M.2 SATA drive to a desktop computer. Take advantage of NVMe SSD speeds in a desktop computer. | M-Key NVMe and AHCI drives interface directly with the PCIe bus. B-Key SATA drives require the use of a SATA cable (not included). | Fits a PCIe x4, x8, or x16 slot. Robust design includes mounting brackets and a heat dissipating PCB. | Adapts the connectors only. The M.2 drive communicates directly with the PCIe and/or SATA bus. Both slots can be used simultaneously. | Compatible with 2230 (30mm), 2242 (42mm), 2260 (60mm), and 2280 (80mm) M.2 drives.

Connect an M.2 NVMe drive to a PCI-e 3.0 port. Take advantage of NVMe SSD speeds in a desktop computer. | For M key NVMe drives with PCIe support only. Does NOT support M.2 SATA SSDs. Does not work with B key drives. | Fits a PCIe x4, x8, or x16 slot. Does not fit PCIe x1. | Adapts the connectors only. The M.2 drive communicates directly with the PCIe bus. | Compatible with 2230 (30mm), 2242 (42mm), 2260 (60mm), and 2280 (80mm) M.2 drives.

INTERNAL MINI SAS DATA CABLE connects a RAID or PCIe controller with an SFF-8087 port to 4 discrete SATA drives • Mini SAS to SATA adapter provides reliable internal connectivity between a Serial attached SCSI controller card in a computer system and direct attached storage devices with a SATA connector | LEVERAGE HARDWARE RAID PERFORMANCE with this SATA multi-lane cable • Two cables can connect up to 8 SATA drives to span RAID controller arrays and share performance across two PCIe 2.0 x8 lanes with compatible host bus adapters • Supports up to 6Gbs data transfer rate per drive | DIY OR PRO INSTALLERS both appreciate the convenience of a forward fan-out cable with an internal mSAS connector when expanding storage needs • Slim ribbon cables minimize airflow impact in a computer case | FLEXIBLE DESIGN of SAS breakout cable includes acetate cloth tape over slim ribbon cables for strain relief to protect cables without rigidity • Woven mesh sheath covers half of the cable for easy routing • P1 to P4 markers provide easy ID after installation • Low profile SATA connectors have easy-grip treads with stainless steel latches to prevent accidental disconnection and reduce vibration disconnection | Length: 1.6 Feet / 50cm

These dual head pry tools are designed for opening smart phone cases and removing internal components that are fastened by adhesive. They are constructed of nylon plastic, a flexible yet durable material, which can withstand the application of significant force without scratching the case. | Length: 3.25 IN / 82.55 MM | Width: 0.275 IN / 7.25 MM

Add graphics cards to your mining rig | 3 ways to power: 4pin Molex, 15pin SATA, or 6pin PCIE • Onboard LED indicator shows the connection status | Solid capacitors and an inductor coil work together to provide smooth and stable power to the graphics card, protecting your investment | The included 2 foot USB 3.0 cable connects the 16x riser board to the 1X adapter card | No drivers needed • Board dimensions: 13cm x 3cm x 1.2cm