Humidity measuring range: 5~99.99%RH; Humidity control range: 5~99%RH; Accuracy: ±3%RH | Control humidity by setting value and differential value; Delay protection for Control output; Query current temperature | Switch the modes between humidification and dehumidification automatically;Calibrate the humidity value; | Alarm when sensor error or humidity exceeds limit; | Alarm when humidity exceeds high/low humidity setting value;
🥇🥇【Convenient Design】Plug and play, easy to use. Support °C/°F display. | 🥇🥇【Dual Relay Output】Be able to connect with refrigeration and heating equipment at the same time. | 🥇🥇【Dual Display Window】Be able to display measured temperature and set temperature at the same time. | 🥇🥇【Buzzer Alarm】High and low temperature alarms are available when the temperature is over or the sensor is with issue. | 🥇🥇【Safety】Maximum output load: 1100W(110V). It is with temperature calibration and compressor delay which can protect your refrigeration.
👍👍【WIFI & APP】WIFI smart controller supports both IOS & Android,WIFI supports 2.4GHz Wi-Fi router, free APP “InkbirdSmart” which is able to control temperature at any time. | 👍👍【Dual Relay Output】Dual relay output, which can connect heating and cooling device at the same time. | 👍👍【Alarm for Safe】 High/Low temperature limit setting alarm. | 👍👍【Convenient Design】 Plug-n-play, easy to use. Support ℃/℉reading and Temperature calibration. | 👍👍【Max Watt】Maximum output load: 1100W(110V).
🌠🌠【Setting Independently】Inkbird C206T lets you to control your desired environment temperature. You can set the day and night temperature independently to connect your heat equipment, then set the temperature that you want to maintain. | 🌠🌠【Accuracy Temperature】The heat thermostat is with 6.56ft precise temperature sensor and its adjustable set points temperature control from -58 to 212°F with an accuracy of ±1°F. | 🌠🌠【Three Display Window】Be able to display 3 different details such as the current temperature, the setting temperature and the current time. | 🌠🌠【Waterproof Probe】 The NTC stainless probe is waterproof, IP68 Grade. Its diameter is 1.57”x 0.2”. | 🌠🌠【Power parameter 】Please be sure to use within 13.5A 110V 1500W
Temperature Control Mode: On/Off Control. Cooling and Heating control. | Fully submersible probe. Aquarium probe works better in water than standard probe. | Temperature calibration; Over-temperature and sensor fault alarm. Dual display window, be able to display measured temperature and set temperature at the same time. | Maximum output load: 1200W (110V). | It's an all in one, simple solution providing control of cooling and heating.