3 in 1 Functions Repeater Mode- Extend WiFi coverage of an existing wireless network. AP Mode(Wireless Access Point)- Covert a wired network to a wireless networkPlease wait for at least 20 seconds after you connect the web line ! . Router Mode- Create an instant private wireless N network and enable multiple devices to share it. Specification: Antenna: 2 x 5dBi Antenna Plug type: US standard plug Port: 1 Network Interface WiFi Band:Dual band(2.4/5.8GHz) Wi-Fi Transmission Speed: Up to 750Mbps Operating temperature: 0 to 40 Celsius degree Storage temperature: -40 to 70 Celsius degree Easy installation: You can set it up by press WPS button , and you can also set it up refer to the following steps: 1.Connect WiFi signal like "comfast-xxx" in WLAN setting 2.Open the browser and type the IP address:192.168.10.1 3.Enter the default password "admin" and click the "login" 4.It will scan the wireless signal, and then please choose the signal you want to repeat. 5.Enter the WiFi password of your wireless router. 6.The repeater will be setting successfully within 30s.Then you can go to WLAN setting and connect to the new WiFi SSD. Tips:: The distance that WiFi signal can extend, is depending on the distance among router, repeater and WiFi users. So controlling the distance between repeater and router, then you can control the distance that WiFi signal can extend Please note that the Wi-Fi extender only extends the Wi-Fi coverage, could not BOOST the speed of your original router or hold the same speed of the original router The speed of the repeater depends on your ISP Package Contents:: 1x Wifi Repeater 1x Web Line 1x US Plug 1x Quick Installation Guide