Simple 3-step setup:

1. Plug the extender into a power outlet near the router. Wait for about 20 seconds until the repeater's on indicator light blinks slowly;

2. Go to your phone's WiFi connection page and select "wifi-XXX" to connect. (If you cannot find the name of the WIFI-XXX, it is recommended to turn on your phone's airplane mode and then turn off the airplane mode). ;

3. Connect to "wifi-XXX" and then jump directly to the browser page to set the WIFI information of the repeater, Login Password:admin,then connect your wifi router name and enter the password(Note:password cant used ""）,set your extender SSID and password,note that the password of the repeater set inside needs to be the same as the WIFI password of the router!!! Click:start connect,wait 30-60s ,set successfully ,EXTENDER light on



Frequently asked questions

1、Q: Mobile phone settings or computer settings?

A: Mobile phone or computer can be set. Recommend cell phone setting, more convenient and fast.

2. Q: Can't find the wifi name of the repeater?

A：Press and hold the RESET button for 5 seconds on the side of the repeater using the card pin included in the box, then open the airplane mode on your phone and then close it, and search the network again.

3. Q: Why didn't it jump to the repeater setting page?

A: First, make sure the cell phone (or computer) is connected to the "wifi-XXX" WIFI, if it is not automatically jumped to the settings page, manually enter 192.168.11.1 to enter the settings.

4. Q: Why is there still no network for the repeater after the setup is completed?

A: Check whether the WIFI password set by the repeater is the same as the WIFI password of the superior router, this must be consistent.