New arrival.
Product description
Specification:
Material: PLA
Brand Name: CC3D
Color: Silk Golden Yellow
Net Weight: 2.2 pounds (1kg)
Diameter: 1.75 millimeters
Print Settings and tips:
Printing Temperature: 195-220°C
Hot bed Temperature: 40-60°C
Other Layer Printing Speed: 30-60mm/s,the printing speed of Silk PLA is suggested to be about 30mm / s.
First Layer Printing Speed: 20-25 mm / s.
Retraction:0-5mm
Retraction Speed:<45mm/s
Clean or change the nozzle before printing is good way to reduce jam if it was used for many times.
Possible problems:
Some of 3D printer with Bowden Drive Extruder may have clog problems. The reason is that the softening temperature of silk PLA is lower.
The solution method is:
1.Turn off Retraction settings.
2.It is necessary to clean up the filaments blocked in the throat before printing for second time.
Please Pay Attention:
Retract the filament if you are going leave your printer inactive for somedays.
Store this filament in a dry and sealed bag or box to extend the life of your filament.
When storing the filament, Please pass the loose end through the hole at the edge of the filament reel,this can avoid entanglement. It can be fed correctly and properly when you use it next time.