Quantity: 1 pc. | Color: Silver | Grit: Fine (F) | Size: 3/32” Shank | Design: Small Flat top Carbide Bit | Designed with an “x” shaped pattern, PANA’s Small Flat top Carbide Bit is best used for both acrylic and natural nails to shape, contour, polish and removing gel nails, dead skin and tough calluses. It is made of a tungsten material to provide you a durable quality for a long-lasting use. | With its proven and tested durability, it will for sure perform well in a delicate equal with strength pointed and cutting performance. In addition of its quality, PANA’s Small Flat top Carbide Bit is designed to have a straight barrel and flat top in avoidance of cutting and scratching the client’s cuticle and side walls. Reassuring their safety and comfortability. | It is best to pick the right drill bit for the job as PANA’s Drill bits allow you to shape and file your nails, and they come in a variety of shapes, sizes materials and grits. While some grits have a multifunctional function like this fine grit, some are specific to certain purposes. With good care and proper cleaning of this Small Flat top Carbide bit with water it is important to practice a proper hygiene and sanitation for client’s health. | No clogging, resistance of acid alkali and heat. This Carbide bit is suitable professional and personal use. Providing you a satisfaction guaranteed!

Color: Purple| Material: Plastic| 2.13 Inches x 5.01 Inches | Capacity: 7 oz | A L C O H O L imprinted letter on the bottle | Easy to use push down pump dispenser bottle with Flip top Cap | Large opening for easy filling and cleaning. Clear Bottle with wording printed. | Use a Cotton pad and Push down the dispenser top, the liquid will rise to the top and will be observed into the cotton pad. Reduce odors, and maintain purity for your bottle. | Multipurpose bottle - Can be used to hold acetone, nail polish remover, make up oil remover, skin product lotion, essence, cleaners, etc.

Quantity: 1 pc. | Color: Silver | Grit: Extra Fine (XF) | Size: 3/32” Shank | Measurement: Length: 1.50 in. | Barrel Height: 0.50” Width: 0.20” | Design: 5 in 1 Two-way Carbide Bit | PANA 3/32” 5 in 1 Two-way carbide bit is made of a tungsten steel material. This material is one of the hardest metals which is built to last and are sturdy and durable. It has 5 purposes in 1 Carbide bit which is built to last and multifunctional for cleaning and prepping, shaping and shortening, cuticle work, under the nail and backfills. | In a well strength pointed and cutting performance, with good care you can use them in a very long time for gel surface and acrylic nails. It can also be work on nail file, shaping and cutting nails, grinding, sanding and so much more. These 5 in 1 Carbide bits are hard wearing, sharp and durable also crafted with delicate. | It has a 2-way rotation function both for right and left-handed users giving you a flawless and easily handling while in use. The 2-way rotation function is uniquely designed to make the carbide bit cut smoothly in clockwise and counter-clockwise directions preventing your hands from getting hurt. | It is highly advised to clean your carbide bits before and after each use with warm water to practice a proper hygiene and provides client’s safety and health. Cleaning your carbide bits can prevent it from getting dull ensuring you a long-lasting use. Suitable for a professional and nail enthusiast.

Quantity: 1 pc. | Color: Black | Grit: Fine (F) | Size: 3/32hank | Measurement: Length: 1.50 in. | Barrel Height: 0.50idth: 0.20< Design: 5 in 1 Two-way Carbide Bit | PANA 3/325 in 1 Two-way carbide bit is made of a tungsten steel material. This material is one of the hardest metals which is built to last and are sturdy and durable. It has 5 purposes in 1 Carbide bit which is built to last and multifunctional for cleaning and prepping, shaping and shortening, cuticle work, under the nail and backfills. | In a well strength pointed and cutting performance, with good care you can use them in a very long time for gel surface and acrylic nails. It can also be work on nail file, shaping and cutting nails, grinding, sanding and so much more. These 5 in 1 Carbide bits are hard wearing, sharp and durable also crafted with delicate. | It has a 2-way rotation function both for right and left-handed users giving you a flawless and easily handling while in use. The 2-way rotation function is uniquely designed to make the carbide bit cut smoothly in clockwise and counter-clockwise directions preventing your hands from getting hurt. | It is highly advised to clean your carbide bits before and after each use with warm water to practice a proper hygiene and provides clientàsafety and health. Cleaning your carbide bits can prevent it from getting dull ensuring you a long-lasting use. Suitable for a professional and nail enthusiast.

Quantity: 1 pc. | Color: Silver | Grit: Medium (M) | Size: 3/32” Shank | Measurement: Length: 1.50 in. | Barrel Height: 0.50” Width: 0.20” | Design: 5 in 1 Two-way Carbide Bit | PANA 3/32” 5 in 1 Two-way carbide bit is made of a tungsten steel material. This material is one of the hardest metals which is built to last and are sturdy and durable. It has 5 purposes in 1 Carbide bit which is built to last and multifunctional for cleaning and prepping, shaping and shortening, cuticle work, under the nail and backfills. | In a well strength pointed and cutting performance, with good care you can use them in a very long time for gel surface and acrylic nails. It can also be work on nail file, shaping and cutting nails, grinding, sanding and so much more. These 5 in 1 Carbide bits are hard wearing, sharp and durable also crafted with delicate. | It has a 2-way rotation function both for right and left-handed users giving you a flawless and easily handling while in use. The 2-way rotation function is uniquely designed to make the carbide bit cut smoothly in clockwise and counter-clockwise directions preventing your hands from getting hurt. | It is highly advised to clean your carbide bits before and after each use with warm water to practice a proper hygiene and provides client’s safety and health. Cleaning your carbide bits can prevent it from getting dull ensuring you a long-lasting use. Suitable for a professional and nail enthusiast.

Quantity: 1 piece | Color: Black | Grit: 2X Coarse | Shank Size: 3/32” | [TUNGSTEN CARBIDE] Made with the hardest material next to diamonds, which will provide durability for long lasting use without the fear of getting dull. | [SHAPE] The drill bits are flat at the top with straight barrels to protect the cuticles and side walls from scratches and cuts upon contact. | [USES] Best for acrylic, dip powder, or gel nails to cut, shorten, backfill and shape the nail. | [MEASUREMENTS] Large Length: 1.5 Inches | Barrel: 0.26 Inches X 0.5 Inches

Quantity: 1 piece | Color: Black | Grit: Fine | Shank Size: 3/32” | [TUNGSTEN CARBIDE] Made with the hardest material next to diamonds, which will provide durability for long lasting use without the fear of getting dull. | [SHAPE] The drill bits are flat at the top with straight barrels to protect the cuticles and side walls from scratches and cuts upon contact. | [USES] Best for acrylic, dip powder, or gel nails to cut, shorten, backfill and shape the nail. | [MEASUREMENTS] Large Length: 1.5 Inches | Barrel: 0.26 Inches X 0.5 Inches

Quantity: 1 Piece | Color: Silver | Grit: 3X Coarse | Shank size: 3/32" | [TUNGSTEN CARBIDE] Made with the hardest material next to diamonds, which will provide durability for long lasting use without the fear of getting dull. | [SHAPE] The drill bits are flat at the top with straight barrels to protect the cuticles and side walls from scratches and cuts upon contact. | [USES] Best for acrylic, dip powder, or gel nails to cut, shorten, backfill and shape the nail. | [MEASUREMENTS] Large Length: 1.5 Inches | Barrel: 0.26 Inches X 0.5 Inches

Quantity: 1 Piece | Color: Silver | Grit: Coarse | Shank size: 3/32" | [TUNGSTEN CARBIDE] Made with the hardest material next to diamonds, which will provide durability for long lasting use without the fear of getting dull. | [SHAPE] The drill bits are flat at the top with straight barrels to protect the cuticles and side walls from scratches and cuts upon contact. | [USES] Best for acrylic, dip powder, or gel nails to cut, shorten, backfill and shape the nail. | [MEASUREMENTS] Large Length: 1.5 Inches | Barrel: 0.26 Inches X 0.5 Inches

Quantity: 1 piece | Color: Silver | Grit: Coarse | Shank Size: 3/32" | Measurement: Large Length: 1.5 Inches | Barrel: 0.26 Inches x 0.5 Inches | Design: Smooth Top Small Barrel Carbide Bit | Made with a tungsten steel material PANA’s 3/32” Shank Smooth Top Small Carbide Bit is designed to have a smooth round top to help smoothing product and prepping for topcoat, it is best to help for shortening the acrylics and dip powders, backfill cutting and creating a sharp c-curve | The Coarse texture of this Smooth top Small Barrel Carbide Bit is perfect for removing lifted areas around the nail bed without damaging it. It is designed for cutting smoothly and it also works in both clockwise and counterclockwise making them useful for right and left nail techs. can be used to shorten nails, remove nail enhancements, do back fills, and perfect for removing lifted areas around the nail bed, without creating any damage | This Carbide bit helps the nail technician tackles a surface area that is hard to reach. This Carbide bit is known for being a safer nail tool and comfortable to get into tight areas such as side walls and cuticles without scratching the natural nails and protects your skin from getting cuts avoiding you or your clients from getting hurt. It is best to pick the right drill bit for the job as PANA’s each drill bits allow you to shape and file your nails and they come in a variety. | For avoiding it from being dull, it is best clean and sanitize your carbide bits with water and for a long-lasting use. Not cleaning your carbide bits properly will result of creating friction and heat and damaging you or your client’s nails. Suitable for Professional and Personal use.

Quantity: 1 piece | Color: Silver | Grit: Extra Coarse | Shank Size: 3/32" | Measurement: Large Length: 1.5 Inches | Barrel: 0.26 Inches x 0.5 Inches | Design: Smooth Top Large Barrel Carbide Bit | Made with a tungsten steel material PANA’s 3/32” Shank Smooth Top Small Carbide Bit is designed to have a smooth round top to help smoothing product and prepping for topcoat, it is best to help for shortening the acrylics and dip powders, backfill cutting and creating a sharp c-curve | The Extra Coarse texture of this Smooth top Small Barrel Carbide Bit is perfect for removing lifted areas around the nail bed without damaging it. It is designed for cutting smoothly and it also works in both clockwise and counterclockwise making them useful for right and left nail techs. can be used to shorten nails, remove nail enhancements, do back fills, and perfect for removing lifted areas around the nail bed, without creating any damage | This Carbide bit helps the nail technician tackles a surface area that is hard to reach. This Carbide bit is known for being a safer nail tool and comfortable to get into tight areas such as side walls and cuticles without scratching the natural nails and protects your skin from getting cuts avoiding you or your clients from getting hurt. It is best to pick the right drill bit for the job as PANA’s each drill bits allow you to shape and file your nails and they come in a variety. | For avoiding it from being dull, it is best clean and sanitize your carbide bits with water and for a long-lasting use. Not cleaning your carbide bits properly will result of creating friction and heat and damaging you or your client’s nails. Suitable for Professional and Personal use.

Quantity: 1 piece | Color: Clear | Size: 14 brush | Dimension: Length: 7.0 inches | Tips Brush: 0.3 Inches x 1.0 Inches | [Design] Size 14 Brush Handle | A smooth and sturdy crystal-clear acrylic with our silver sturdy alloy round ferrule that holds the pure Kolinsky hair firmly to prevent splitting or deformation of the hairs. Weighted just right, the brush is made to provide full comfortability for all nail techs to hold. | [Design] Size 14 Brush Handle | A smooth and sturdy crystal-clear acrylic with our silver sturdy alloy round ferrule that holds the pure Kolinsky hair firmly to prevent splitting or deformation of the hairs. Weighted just right, the brush is made to provide full comfortability for all nail techs to hold. | Pana professional brush has a very smooth finish and it lasts longer than other normal brushes. Apply acrylic products easily, smoothly and consistently. The more often this brush is used, the smoother effect it will have. Be sure to follow proper brush care tips to extend the life of your brush. This acrylic nail brush for acrylic nail extension or carving, lightweight and comfortable, easy holding to draw, smooth application, convenient for you to create 3D patterns, grids or flowers. | [Salon Grade] Perfect for all nail acrylic needs from fill to full sets and UV builder gel. The quality you can trust.

Quantity: 1 piece | Color: Clear acrylic | Size: 10 brush | Dimension: Length: 7.0 inches | Tips Brush: 0.3 Inches x 0.9 Inches | [Design] Size 10 Brush Handle | A smooth and sturdy clear acrylic handle with our silver sturdy alloy crimped ferrule that holds the pure Kolinsky sable hair firmly to prevent splitting or deformation of the hairs. Weighted just right, the brush is made to provide full comfortability for all nail techs to hold. | [Material] Pana acrylic brushes are made with the highest level of quality in materials, such as pure Kolinsky sable hair to ensure durability that soft enough to sculpt and shape to any nail shape and size. | Pana professional brush has a very smooth finish and it lasts longer than other normal brushes. Apply acrylic products easily, smoothly and consistently. The more often this brush is used, the smoother effect it will have. Be sure to follow proper brush care tips to extend the life of your brush. This acrylic nail brush for acrylic nail extension or carving, lightweight and comfortable, easy holding to draw, smooth application, convenient for you to create 3D patterns, grids or flowers. | [Salon Grade] Perfect for all nail acrylic needs from fill to full sets and UV builder gel. The quality you can trust.

Quantity: 1 piece | Color: Clear Acrylic | Size: 12 brush | Dimension: Length: 7.0 inches | Tips Brush: 0.3 Inches x 1.0 Inches | The Pana round acrylic nail brush with a clear sturdy handle has a brush size 12 that is made from a pure Kolinsky hair perfectly made for making a substantial amount of acrylic bead. The pure Kolinsky hair firmly to prevent splitting or deformation of the hairs. Weighted just right, the brush is made to provide full comfortability for all nail techs to hold. | The Nail Brush comes with a sturdy alloy ferrule that locked the brush head and the handle firmly, effectively preventing the Nail Brush's hair fall off and handle damage, can be used for a long time. The handle has a clear acrylic ergonomic design of the handle, easy to hold and operate, and excellent comfort grip will make it to your favorite nail art tool, providing you with a better nail art experience | Pana professional brush has a very smooth finish and it lasts longer than other normal brushes. Apply acrylic products easily, smoothly and consistently. The more often this brush is used, the smoother effect it will have. Be sure to follow proper brush care tips to extend the life of your brush. This acrylic nail brush for acrylic nail extension or carving, lightweight and comfortable, easy holding to draw, smooth application, convenient for you to create 3D patterns, grids or flowers. | [Salon Grade] Perfect for all nail acrylic needs from fill to full sets and UV builder gel. The quality you can trust.

Quantity: 1 piece | Color: Clear acrylic | Size: 14 brush | Dimension: Length: 7.0 inches | Tips Brush: 0.3 Inches x 1.0 Inches | [Design] Size 14 Brush Handle | A smooth and sturdy clear acrylic with our silver sturdy alloy crimped ferrule that holds the pure Kolinsky sable hair firmly to prevent splitting or deformation of the hairs. Weighted just right, the brush is made to provide full comfortability for all nail techs to hold. | [Material] Pana acrylic brushes are made with the highest level of quality in materials, such as pure Kolinsky sable hair to ensure durability that soft enough to sculpt and shape to any nail shape and size. | [Salon Grade] Perfect for all nail acrylic needs from fill to full sets and UV builder gel. The quality you can trust. | Pana professional brush has a very smooth finish and it lasts longer than other normal brushes. Apply acrylic products easily, smoothly and consistently. The more often this brush is used, the smoother effect it will have. Be sure to follow proper brush care tips to extend the life of your brush.

Quantity: 1 piece | Color: Clear | Size: 6 brush | Dimension: Length: 6.9 inches | Tips Brush: 0.2 Inches x 0.8 Inches | The Pana round acrylic nail brush with a clear sturdy handle has a size 6 brush size that is made from a pure kolinsky hair perfectly made for making a substantial amount of acrylic bead. The pure Kolinsky sable hair firmly to prevent splitting or deformation of the hairs. Weighted just right, the brush is made to provide full comfortability for all nail techs to hold. | The Nail Brush comes with a sturdy alloy ferrule that locked the brush head and the handle firmly, effectively preventing the Nail Brush's hair fall off and handle damage, can be used for a long time. The handle has a clear acrylic ergonomic design of the handle, easy to hold and operate, and excellent comfort grip will make it to your favorite nail art tool, providing you with a better nail art experience | Pana professional brush has a very smooth finish and it lasts longer than other normal brushes. Apply acrylic products easily, smoothly and consistently. The more often this brush is used, the smoother effect it will have. Be sure to follow proper brush care tips to extend the life of your brush. This acrylic nail brush for acrylic nail extension or carving, lightweight and comfortable, easy holding to draw, smooth application, convenient for you to create 3D patterns, grids or flowers | [Salon Grade] Perfect for all nail acrylic needs from fill to full sets and UV builder gel. The quality you can trust.

Quantity: 1 piece | Color: purple wood | Size: 12 brush | Dimension: Length: 7.0 inches | Tips Brush: 0.3 Inches x 1.0 Inches | [Design] Size 12 Round Brush Handle | A smooth and sturdy purple wooden handle painted with black sturdy alloy crimped ferrule that holds the pure Kolinsky hair firmly to prevent splitting or deformation of the hairs. Weighted just right, the brush is made to provide full comfortability for all nail techs to hold. | [Material] Pana acrylic brushes are made with the highest level of quality in materials, such as pure Kolinsky hair to ensure durability that soft enough to sculpt and shape to any nail shape and size. After each using this acrylic nail brush on single nails during the acrylic application, make sure to clean the brush with the acrylic liquid monomer to prevent the acrylic powder on the brush from clumping, or it will be hard to clean because acrylic powder quickly clumps in a short time. | Pana professional brush has a very smooth finish and it lasts longer than other normal brushes. Apply acrylic products easily, smoothly and consistently. The more often this brush is used, the smoother effect it will have. Be sure to follow proper brush care tips to extend the life of your brush. This acrylic nail brush for acrylic nail extension or carving, lightweight and comfortable, easy holding to draw, smooth application, convenient for you to create 3D patterns, grids or flowers. | [Salon Grade] Perfect for all nail acrylic needs from fill to full sets and UV builder gel. The quality you can trust.

Quantity: 1 piece | Color: purple wood | Size: 14 brush | Dimension: Length: 7.0 inches | Tips Brush: 0.3 Inches x 1.0 Inches | [Design] Size 14 Round Brush Handle | A smooth and sturdy purple wooden handle painted with black sturdy alloy crimped ferrule that holds the pure Kolinsky hair firmly to prevent splitting or deformation of the hairs. Weighted just right, the brush is made to provide full comfortability for all nail techs to hold. | [Material] Pana acrylic brushes are made with the highest level of quality in materials, such as pure Kolinsky hair to ensure durability that soft enough to sculpt and shape to any nail shape and size. After each using this acrylic nail brush on single nails during the acrylic application, make sure to clean the brush with the acrylic liquid monomer to prevent the acrylic powder on the brush from clumping, or it will be hard to clean because acrylic powder quickly clumps in a short time. | Pana professional brush has a very smooth finish and it lasts longer than other normal brushes. Apply acrylic products easily, smoothly and consistently. The more often this brush is used, the smoother effect it will have. Be sure to follow proper brush care tips to extend the life of your brush. This acrylic nail brush for acrylic nail extension or carving, lightweight and comfortable, easy holding to draw, smooth application, convenient for you to create 3D patterns, grids or flowers. | [Salon Grade] Perfect for all nail acrylic needs from fill to full sets and UV builder gel. The quality you can trust.

Quantity: 1 piece | Color: purple wood | Size: 16 brush | Dimension:Length: 7.0 inches | Tips Brush: 0.4 Inches x 1.0 Inches | [Design] Size 16 Round Brush Handle | A smooth and sturdy purple wooden handle painted with black sturdy alloy crimped ferrule that holds the pure Kolinsky hair firmly to prevent splitting or deformation of the hairs. Weighted just right, the brush is made to provide full comfortability for all nail techs to hold. | [Material] Pana acrylic brushes are made with the highest level of quality in materials, such as pure Kolinsky hair to ensure durability that soft enough to sculpt and shape to any nail shape and size. | Pana professional brush has a very smooth finish and it lasts longer than other normal brushes. Apply acrylic products easily, smoothly and consistently. The more often this brush is used, the smoother effect it will have. Be sure to follow proper brush care tips to extend the life of your brush. This acrylic nail brush for acrylic nail extension or carving, lightweight and comfortable, easy holding to draw, smooth application, convenient for you to create 3D patterns, grids or flowers. | [Salon Grade] Perfect for all nail acrylic needs from fill to full sets and UV builder gel. The quality you can trust.

Quantity: 1 piece | Color: Round White Swirl Blue Handle | Size: 20 brush | Dimension: Length: 7.3 inches | Tips Brush: 0.4 Inches x 1.1 Inches | [Design] Size 20 Round Brush Handle | A smooth and sturdy Round White Swirl Blue Handle painted with pink sturdy alloy crimped ferrule that holds the pure kolinsky hair firmly to prevent splitting or deformation of the hairs. Weighted just right, the brush is made to provide full comfortability for all nail techs to hold. | [Material] Pana acrylic brushes are made with the highest level of quality in materials, such as pure Kolinsky hair to ensure durability that soft enough to sculpt and shape to any nail shape and size. After each using this acrylic nail brush on single nails during the acrylic application, make sure to clean the brush with the acrylic liquid monomer to prevent the acrylic powder on the brush from clumping, or it will be hard to clean because acrylic powder quickly clumps in a short time. | Pana professional brush has a very smooth finish and it lasts longer than other normal brushes. Apply acrylic products easily, smoothly and consistently. The more often this brush is used, the smoother effect it will have. Be sure to follow proper brush care tips to extend the life of your brush. This acrylic nail brush for acrylic nail extension or carving, lightweight and comfortable, easy holding to draw, smooth application, convenient for you to create 3D patterns, grids or flowers. | [Salon Grade] Perfect for all nail acrylic needs from fill to full sets and UV builder gel. The quality you can trust.

Quantity: 1 piece | Color: Beige handle with Purple Ferrule Handle | Size: 12 brush | Dimension: Length: 7.0 inches | Tips Brush: 0.3 Inches x 1.0 Inches | [Design] Size 12 Round Brush Handle | A smooth and sturdy beige hardwood handle painted with purple sturdy alloy crimped ferrule that holds the pure Kolinsky hair firmly to prevent splitting or deformation of the hairs. Weighted just right, the brush is made to provide full comfortability for all nail techs to hold. | [Design] Size 12 Round Brush Handle | A smooth and sturdy beige hardwood handle painted with purple sturdy alloy crimped ferrule that holds the pure Kolinsky hair firmly to prevent splitting or deformation of the hairs. Weighted just right, the brush is made to provide full comfortability for all nail techs to hold. | Pana professional brush has a very smooth finish and it lasts longer than other normal brushes. Apply acrylic products easily, smoothly and consistently. The more often this brush is used, the smoother effect it will have. Be sure to follow proper brush care tips to extend the life of your brush. This acrylic nail brush for acrylic nail extension or carving, lightweight and comfortable, easy holding to draw, smooth application, convenient for you to create 3D patterns, grids or flowers. | [Salon Grade] Perfect for all nail acrylic needs from fill to full sets and UV builder gel. The quality you can trust.

Quantity: 1 piece | Color: Beige handle with Purple Ferrule Handle | Size: 8 brush | Dimension: Length: 6.9 inches | Tips Brush: 0.3 Inches x 0.9 Inches | [Design] Size 8 Round Brush Handle | A smooth and sturdy beige hardwood handle painted with purple sturdy alloy crimped ferrule that holds the pure Kolinsky sable hair firmly to prevent splitting or deformation of the hairs. Weighted just right, the brush is made to provide full comfortability for all nail techs to hold. | [Material] Pana acrylic brushes are made with the highest level of quality in materials, such as pure Kolinsky sable hair to ensure durability that soft enough to sculpt and shape to any nail shape and size. After each using this acrylic nail brush on single nails during the acrylic application, make sure to clean the brush with the acrylic liquid monomer to prevent the acrylic powder on the brush from clumping, or it will be hard to clean because acrylic powder quickly clumps in a short time. | Pana professional brush has a very smooth finish and it lasts longer than other normal brushes. Apply acrylic products easily, smoothly and consistently. The more often this brush is used, the smoother effect it will have. Be sure to follow proper brush care tips to extend the life of your brush. This acrylic nail brush for acrylic nail extension or carving, lightweight and comfortable, easy holding to draw, smooth application, convenient for you to create 3D patterns, grids or flowers. | [Salon Grade] Perfect for all nail acrylic needs from fill to full sets and UV builder gel. The quality you can trust.

Quantity: 1 pc. | Color: Black | Grit: 3X Coarse (3XC) | Size: 3/32” Shank | Measurement: Head Dimensions: 0.26 Inches x 0.5 Inches | Length: 1.5 Inches | Design: Smooth Top Large Barrel Carbide Bit | This Carbide bit is used for creating a sharp c-curve for the nails and can also use for smoothing the product, prepping topcoat smoothing the acrylics, backfills of the nails, this carbide bit is known for being a safer nail tool and comfortable to get into tight areas such as sidewalls and cuticle without scratching the nails and protecting client’s skin from getting hurt and preventing the natural nails from the damage it may cause. | While some grits have a multifunctional function such as this fine grit, some has a specific to certain purposes, so it is best to pick the right drill bit for the job and to get the nail tech’s preferences. PANA’s each drill bits allow you to shape and file your nail and comes in a variety of shapes, sizes materials and grits. | PANA 3/32” Shank Smooth Top Large Carbide Bit is made of a tungsten steel material which is made from a durable, sturdy and as hard next to a diamond. To provide you a smooth and even filing it is designed to have a smooth top which is used for back fill and removes nail enhancements and shorten the nail, providing you a quick, fast and useful service. | This Smooth Top Carbide Bit is suitable for personal and professional use. This Carbide bit must be sanitized each and after use to practice a proper hygiene to protect the client’s health.

Quantity: 1 pc. | Color: Black | Grit: 5X Coarse (5XC) | Size: 3/32” Shank | Measurement: Large Length: 1.5 Inches | Barrel: 0.26 Inches x 0.5 Inches| Design: Smooth Top Large Barrel Carbide Bit | Made with a tungsten steel material, PANA’s 3/32” Shank Smooth Top Large Carbide Bit is designed to have a smooth top to help smoothing the back fill of the cuticles. With its unique design it can shorten nails, remove nail enhancements, smoothing the product, prepping for topcoat and creates a sharp c-curve. | In addition of protecting the cuticle and the side walls of the nails, this smooth top barrel is design to avoid cuts and scratches of the client’s skin and protecting them from getting hurt. While some grits have a multifunctional function grit some are specific certain purposes such as this 5X Coarse grit. | This Smooth Top Carbide bit helps the nail technician tackles a surface area that is hard to reach. As PANA’s each drill bit allows you to shape and file your nails and they come In a variety of shapes, sizes materials and grits. | This Smooth Top Large Barrel Carbide Bit is for a personal and professional use. With good care and proper cleaning of this carbide bit with warm water. It is important to practice a proper hygiene and sanitation for client’s health. This Carbide bit is not clogging, resistance of acid alkali and acid suitable for natural and artificial nails

Quantity: 1 pc. | Color: Black | Grit: Coarse (C) | Size: 3/32” Shank | Measurement: Head Dimensions: 0.20 Inches x 0.5 Inches | Length: 1.5 Inches | This PANA 3/32” Shank Smooth Top Large Barrel Carbide Bit has a silver carbide color and designed to have a smooth and even filing. It is best to pick the right drill bit for the job as PANA’s each drill bits allow you to shape and file your nails and they come in a variety of shapes, sizes materials and grits. While some grits have a multifunctional function such as this Coarse Grit, some are specific to certain purposes. | Providing you a safe and trustworthy mani-pedi session with its proven and tested durability, it will for sure perform well in a delicate equal with strength pointed and cutting performance. | PANA 3/32” Smooth Top Large Barrel Carbide Bit can be used to shorten nails, remove enhancements, do backfill and perfect for removing lifted areas around the nail beds without creating any damage. Made with a tungsten steel material and designed to have a smooth round top to help smoothing product and prepping for topcoat, it is best to help for shortening the acrylics and dip powders, backfill cutting and creating a sharp c-curve. | This Smooth Top Carbide Bit is suitable for personal and professional use. With good care and proper cleaning of this carbide bit with warm water it is important to practice a proper hygiene and sanitation for you and your client’s health.

Quantity: 1 pc. | Color: Black | Grit: Extra Coarse (XC) | Size: 3/32” Shank | Measurement: Head Dimensions: 0.26 Inches x 0.5 Inches | Length: 1.5 Inches | Design: Smooth Top large Barrel Carbide Bit | Made with a tungsten steel material PANA’s 3/32” Shank Smooth Top Large Carbide Bit is designed to have a smooth rounded top with straight barrel to protect the cuticles and side walls from scratches and cuts upon contact. Because of its proven and tested durability, it is hard to get dull for a long-lasting use. | This Smooth Top Carbide Bit is used for removing gel nails, removes nail enhancement, do backfill and perfect for removing lifted areas around the nail bed without creating any damage. This Carbide Bit helps the nail technician tackles a surface area that is hard to reach. | With PANA’s Small Flat Top Carbide Bit proven and tested durability, it will for sure perform well in a delicate equal with strength pointed and cutting performance. It is best to use for both acrylic and natural nails to shape, contour, polish and removing gel nails, dead skin and tough calluses | Quickly and perfect for smooth pointed performance and cutting performance. With good care you can use them for a long-time use. Gel surface or natural nail- this tool can be worked on nail file, shaping and cutting nail, grinding, sanding, polishing, removing dead skin and so much more.

Quantity: 1 pc. | Color: Black | Size: 3/32” Shank | Measurement: Head Dimensions: 0.26 Inches x 0.5 Inches | Length: 1.5 Inches | Design: Smooth Top Large Barrel Carbide Bit | Made with a tungsten steel material, PANA’s 3/32” Shank Smooth Top Large Carbide Bit is designed to have a smooth top to help smoothing the back fill of the cuticles. With its unique design it can shorten nails, remove nail enhancements, smoothing the product, prepping for topcoat and creates a sharp c-curve. | In addition of protecting the cuticle and the side walls of the nails, this smooth top barrel is design to avoid cuts and scratches of the client’s skin and protecting them from getting hurt. | This Smooth Top Carbide bit helps the nail technician tackles a surface area that is hard to reach. As PANA’ each drill bit allows you to shape and file your nails and they come In a variety of shapes, sizes materials and grits. While some grits have a multifunctional function such as this extra fine grit some are specific certain purposes. | This Smooth Top Large Barrel Carbide Bit is for a personal and professional use. With good care and proper cleaning of this carbide bit with warm water. It is important to practice a proper hygiene and sanitation for client’s health. This Carbide bit is not clogging, resistance of acid alkali and acid suitable for natural and artificial nails.

Quantity: 1 pc. | Color: Black | Grit: Fine Size: 3/32” Shank |Measurement: Large Length: 1.5 Inches | Barrel: 0.26 Inches x 0.5 Inches | Design: Smooth Top Large Barrel Carbide Bit | PANA 3/32” Shank Smooth Top Large Carbide Bit is made of a tungsten steel material which is made from a durable, sturdy and as hard next to a diamond. To provide you a smooth and even filing it is designed to have a smooth top which is used for back fill and removes nail enhancements and shorten the nail, providing you a quick, fast and useful service. | While some grits have a multifunctional function such as this fine grit, some has a specific to certain purposes, so it is best to pick the right drill bit for the job and to get the nail tech’s preferences. PANA’s each drill bits allow you to shape and file your nail and comes in a variety of shapes, sizes materials and grits. | This Carbide bit is used for creating a sharp c-curve for the nails and can also use for smoothing the product, prepping topcoat smoothing the acrylics, backfills of the nails, this carbide bit is known for being a safer nail tool and comfortable to get into tight areas such as sidewalls and cuticle without scratching the nails and protecting client’s skin from getting hurt and preventing the natural nails from the damage it may cause. | This Smooth Top Carbide Bit is suitable for personal and professional use. This Carbide bit must be sanitized each and after use to practice a proper hygiene to protect the client’s health.

Quantity: 1 pc. | Color: Black | Grit: Medium (M) | Size: 3/32” Shank | Measurement: Head Dimensions: 0.26 Inches x 0.5 Inches | Length: 1.5 Inches | Design: Smooth Top Large Barrel Carbide bit | Made with the hardest material next to a diamond, PANA’s Smooth Top Large Barrel Carbide Bit has a tungsten material which will provide durability for a long-lasting use without the fear of getting dull. With its uniquely “x” shaped design and pattern with its Medium coarse grit it is best used for cutting, backfill, shorten and shaping the nail quickly and smoothly. | In addition of its quality, PANA’s Smooth Top Large Barrel Carbide bit is designed to have a straight barrel and smooth top in avoidance of getting cuts and scratches the client’s nail cuticles and side walls skin reassuring their safety and comfortability. | It is best to pick the right drill bit for the job as PANA’s each drill bits allow you to shape and file your nails and they come in a variety of shapes, sizes materials and grits. While some grits have a multifunctional function such as this Medium Grit Smooth top large carbide bit, some are specific to certain purposes. | This Smooth Top Carbide Bit is suitable for personal and professional use. With good care and proper cleaning of this carbide bit with warm water it is important to practice a proper hygiene and sanitation for you and your client’s health.

Quantity: 1 pc. | Color: Gold | Grit: 3X Coarse (3XC) | Size: 3/32” Shank | Measurement: Large Length: 1.5 Inches | Barrel: 0.26 Inches x 0.5 Inches | This PANA 3/32” Shank Smooth Top Large Barrel Carbide Bit has a silver carbide color and designed to have a smooth and even filing. It is best to pick the right drill bit for the job as PANA’s each drill bits allow you to shape and file your nails and they come in a variety of shapes, sizes materials and grits. While some grits have a multifunctional function such as this 3X Coarse Grit, some are specific to certain purposes. | PANA 3/32” Smooth Top Large Barrel Carbide Bit can be used to shorten nails, remove enhancements, do backfill and perfect for removing lifted areas around the nail beds without creating any damage. Made with a tungsten steel material and designed to have a smooth round top to help smoothing product and prepping for topcoat, it is best to help for shortening the acrylics and dip powders, backfill cutting and creating a sharp c-curve. | Providing you a safe and trustworthy mani-pedi session with its proven and tested durability, it will for sure perform well in a delicate equal with strength pointed and cutting performance. | This Smooth Top Carbide Bit is suitable for personal and professional use. With good care and proper cleaning of this carbide bit with warm water it is important to practice a proper hygiene and sanitation for you and your client’s health.

Quantity: 1 pc. | Color: Gold | Grit: 5X Coarse (5XC) | Size: 3/32” Shank | Measurement: Large Length: 1.5 Inches | Barrel: 0.26 Inches x 0.5 Inches| Design: Smooth Top large Barrel Carbide Bit | With PANA 3/32” Shank Smooth Top Large Carbide Bit’s proven and tested durability, it will for sure perform well in a delicate equal with strength pointed and cutting performance. In addition of its quality, PANA’s Small Flat top Carbide Bit is designed to have a straight barrel in avoidance of cutting and scratching the client’s cuticle and side walls. Reassuring their safety and comfortability. | It is best to pick the right drill bit for the job as PANA’s Drill bits allow you to shape and file your nails, and they come in a variety of shapes, sizes materials and grits. While some grits have a multifunctional function like this fine grit, some are specific to certain purposes. With good care and proper cleaning of this Small Flat top Carbide bit with water it is important to practice a proper hygiene and sanitation for client’s health. | Designed with an “x” shaped patter, PANA’s Smooth top Large Carbide Bit is best used for both acrylic and natural nails to shape, contour, polish and removing gel nails, dead skin and tough calluses. It is made of a gold tungsten material to provide you a durable quality for a long-lasting use. | No clogging, resistance of acid alkali and heat. This Carbide bit is suitable professional and personal use. Providing you a satisfaction guaranteed!

Quantity: 1 pc. | Color: Gold | Grit: Extra Coarse (XC) |Size: 3/32” Shank | Measurement: Head Dimensions: 0.26 Inches x 0.5 Inches | Length: 1.5 Inches | Design: Small Flat top carbide bit | With PANA’s Smooth Top Large Carbide Bit proven and tested durability, it will for sure perform well in a delicate equal with strength pointed and cutting performance. It is best to use for both acrylic and natural nails to shape, contour, polish and removing gel nails, dead skin and tough calluses. | Made with a tungsten material PANA’s 3/32” shank size small flat top carbide bit has a black carbide color and designed to have an “x” shape pattern to provide you a smooth, fast and even filing of the nails as a result of a safe and satisfaction guaranteed service for both nail techs and clients. | Each drill bit has its own design to have a smooth top with a straight barrel to avoid scratches and cuts in addition of protecting the cuticles and the side walls of the fingers. To help reach the problem areas that needed to be smoothed out as quick as possible, this carbide bit is designed to have a smooth top and straight barrel. | This small smooth top carbide bit is for professional and personal use. With good care and proper cleaning of this carbide bit with warm water it is important to practice a proper hygiene and sanitation for you and your client’s nails health.

Quantity: 1 pc. | Color: Gold | Grit: Extra Coarse (XC) | Size: 3/32” Shank | Design: Smooth Top Large Carbide Bit | Made with a tungsten steel material, PANA’s 3/32 “Shank Smooth Top Large Barrel Carbide Bit is designed to have a smooth round top to help smoothing product and prepping for topcoat, it Is best to help for shortening the acrylics and dip powder, backfill cutting and creating a sharp c-curve. Providing you in a delicate equal with strength pointed and cutting performance. | This Smooth Top Large Barrel has a 2-way rotation function both for left and right-handed nail techs giving you a flawless and easy handling while in use. However, pay attention and be careful of the cuticles, as the sharp edges may cut into the client's skin. This Carbide bit helps the nail technician tackles a surface area that is hard to reach. | PANA’s Smooth Top Large Carbide Bit is known for being a safer nail tool and comfortable to get into tight areas such as side walls and cuticles without scratching the natural nails and protects your skin from getting cuts avoiding you or your clients from getting hurt. This carbide bits removes nail enhancements, do back fills and perfect for removing lifted areas around the nail bed without creating any damage. | It is best to clean your carbide bits with warm water before each ad after use for a long-lasting use for avoiding your nail tools from being dull. This Carbide bit is suitable for Professional and personal use.

Quantity: 1 pc. | Color: Gold | Grit: Fine | Size: 3/32” Shank | Measurement: Head Dimensions: 0.26 Inches x 0.5 Inches | Length: 1.5 Inches | Design: Smooth Top Large Barrel Carbide Bit | PANA 3/32” Shank Smooth Top Large Carbide Bit is made of a tungsten steel material which is made from a durable, sturdy and as hard next to a diamond. To provide you a smooth and even filing it is designed to have a smooth top which is used for back fill and removes nail enhancements and shorten the nail, providing you a quick, fast and useful service. | While some grits have a multifunctional function such as this fine grit, some has a specific to certain purposes, so it is best to pick the right drill bit for the job and to get the nail tech’s preferences. PANA’s each drill bits allow you to shape and file your nail and comes in a variety of shapes, sizes materials and grits. | PANA Smooth Top Carbide bit is used for creating a sharp c-curve for the nails and can also use for smoothing the product, prepping topcoat smoothing the acrylics, backfills of the nails, this carbide bit is known for being a safer nail tool and comfortable to get into tight areas such as sidewalls and cuticle without scratching the nails and protecting client’s skin from getting hurt and preventing the natural nails from the damage it may cause. | This Smooth Top Carbide Bit is suitable for personal and professional use. This Carbide bit must be sanitized each and after use to practice a proper hygiene to protect the client’s health.

Quantity: 1 pc. | Color: Gold | Grit: Medium | Size: 3/32” Shank | Measurement: Large Length: 1.5 Inches | Barrel: 0.26 Inches x 0.5 Inches | Design: Smooth Top Large Barrel Carbide Bit | PANA Smooth Top Carbide bit is used for creating a sharp c-curve for the nails and can also use for smoothing the product, prepping topcoat smoothing the acrylics, backfills of the nails, this carbide bit is known for being a safer nail tool and comfortable to get into tight areas such as sidewalls and cuticle without scratching the nails and protecting client’s skin from getting hurt and preventing the natural nails from the damage it may cause. | PANA 3/32” Shank Smooth Top Large Carbide Bit is made of a tungsten steel material which is made from a durable, sturdy and as hard next to a diamond. To provide you a smooth and even filing it is designed to have a smooth top which is used for back fill and removes nail enhancements and shorten the nail, providing you a quick, fast and useful service. | This Smooth Top Large Barrel Carbide Bit is for a personal and professional use. With good care and proper cleaning of this carbide bit with warm water. It is important to practice a proper hygiene and sanitation for client’s health. This Carbide bit is not clogging, resistance of acid alkali and acid suitable for natural and artificial nails. | In addition of protecting the cuticle and the side walls of the nails, this smooth top barrel is design to avoid cuts and scratches of the client’s skin and protecting them from getting hurt.

Quantity: 1 pc. | Color: Silver | Grit: 3X Coarse (3XC) | Size: 3/32” Shank | Measurement: Large Length: 1.5 inches | Barrel: 0.26 inches x 0.5 inches | Design: Smooth Top large Barrel Carbide Bit | Made with a tungsten steel material PANA’s 3/32” Shank Smooth Top Large Carbide Bit is designed to have a smooth rounded top with straight barrel to protect the cuticles an side walls from scratches and cuts upon contact. Because of its proven and tested durability, it is hard to get dull for a long-lasting use. | This Smooth Top Carbide Bit is used for removing gel nails, removes nail enhancement, do backfill and perfect for removing lifted areas around the nail bed without creating any damage. This Carbide Bit helps the nail technician tackles a surface area that is hard to reach. | With PANA’s Small Flat Top Carbide Bit proven and tested durability, it will for sure perform well in a delicate equal with strength pointed and cutting performance. It is best to use for both acrylic and natural nails to shape, contour, polish and removing gel nails, dead skin and tough calluses. | Quickly and perfect for smooth pointed performance and cutting performance. With good care you can use them for a long-time use. Gel surface or natural nail- this tool can be worked on nail file, shaping and cutting nail, grinding, sanding, polishing, removing dead skin and so much more.

Quantity: 1 pc. | Color: Silver | Grit: Extra Coarse (XC) | Size: 3/32” Shank | Design: Smooth Top Large Carbide Bit | Made with a tungsten steel material, PANA’s 3/32 “Shank Smooth Top Large Barrel Carbide Bit is designed to have a smooth round top to help smoothing product and prepping for topcoat, it Is best to help for shortening the acrylics and dip powder, backfill cutting and creating a sharp c-curve. Providing you in a delicate equal with strength pointed and cutting performance. | This Carbide bit is known for being a safer nail tool and comfortable to get into tight areas such as side walls and cuticles without scratching the natural nails and protects your skin from getting cuts avoiding you or your clients from getting hurt. It is best to pick the right drill bit for the job as PANA’s each drill bits allow you to shape and file your nails and they come in a variety of shapes, sizes materials and grits. | PANA Smooth Top Large Barrel Carbide Bit can be used to shorten nails, remove enhancements, do backfill and perfect for removing lifted areas around the nail beds without creating any damage. Made with a tungsten steel material and designed to have a smooth round top to help smoothing product and prepping for topcoat, it is best to help for shortening the acrylics and dip powders, backfill cutting and creating a sharp c-curve. | This Smooth Top Carbide Bit is suitable for personal and professional use. With good care and proper cleaning of this carbide bit with warm water it is important to practice a proper hygiene and sanitation for you and your client’s health.

Quantity: 1 pc. | Color: Silver | Grit: Extra Fine (XF) | Size: 3/32” Shank | Measurement: Head Dimensions: 0.25 Inches x 0.5 Inches | Length: 1.5 Inches | Design: Smooth Top Large Barrel Carbide Bit | Made with a tungsten steel material PANA’s 3/32” Shank Smooth Top Large Carbide Bit is designed to have a smooth round top to help smoothing product and prepping for topcoat, it is best to help for shortening the acrylics and dip powders, backfill cutting and creating a sharp c-curve | The Extra Fine texture of this Smooth top large Barrel Carbide Bit is perfect for removing lifted areas around the nail bed without damaging it. It is designed for cutting smoothly and it also works in both clockwise and counterclockwise making them useful for right and left nail techs. can be used to shorten nails, remove nail enhancements, do back fills, and perfect for removing lifted areas around the nail bed, without creating any damage | This Carbide bit helps the nail technician tackles a surface area that is hard to reach. This Carbide bit is known for being a safer nail tool and comfortable to get into tight areas such as side walls and cuticles without scratching the natural nails and protects your skin from getting cuts avoiding you or your clients from getting hurt. It is best to pick the right drill bit for the job as PANA’s each drill bits allow you to shape and file your nails and they come in a variety. | For avoiding it from being dull, it is best clean and sanitize your carbide bits with water and for a long-lasting use. Not cleaning your carbide bits properly will result of creating friction and heat and damaging you or your client’s nails. Suitable for Professional and Personal use.

Quantity: 1 Piece | Color : Black | 3/32" Shank Size | Grit: 4 Extra Coarse - 4XC | Length: 1.5 in | Head Dimensions: 0.2 in x 0.5 in | Crafted with strong, long lasting black carbide material which is more durable for tougher acrylics and lasts 2-3X longer than normal carbide bits | Excellent Durability for Both Hands and Long-Lasting Nail Carbide bit | Perfect Use for Remove Acrylic and Hard Gels, Leaves Nail No Damage.

Quantity: 1 pc. | Color: Gold | Grit: 2X Coarse (2XC) | Size: 3/32” Shank | Measurement: Small Length: 1.5 Inches | Barrel: 0.20 Inches x 0.5 Inches | Design: Smooth Top Small Barrel Carbide Bit | In addition of protecting the cuticle and the side walls of the nails, PANA 3/32 smooth top small barrel is design to avoid cuts and scratches of the client’s skin and protecting them from getting hurt. While some grits have a multifunctional function grit some are specific certain purposes. | This Smooth Top Small Barrel Carbide bit helps the nail technician tackles a surface area that is hard to reach. As PANA’s each drill bit allows you to shape and file your nails and they come in a variety of shapes, sizes materials and grits. | This Smooth Top Small Barrel Carbide Bit is for a personal and professional use. With good care and proper cleaning of this carbide bit with warm water. It is important to practice a proper hygiene and sanitation for client’s health. This Carbide bit is not clogging, resistance of acid alkali and acid suitable for natural and artificial nails | Made with a tungsten steel material, PANA’s 3/32” Shank Smooth Top Small Carbide Bit is designed to have a smooth top to help smoothing the back fill of the cuticles. With its unique design it can shorten nails, remove nail enhancements, smoothing the product, prepping for topcoat and creates a sharp c-curve.