How to use:

1.Wireless network connection: 

Power on the machine by pressing the "Power" key, press the "OK" key to enter the interface, press the up and down keys to select the "System Setup" function block, enter the "Wireless Network Setting", select the wireless network that can be connected, click the "OK" key, click the "Edit" key, enter the password, select (END) and press the "OK" key, click the "OK" key again, and the "Connection succeeded" will be displayed. 

2.IC card copy: 

press the "OK" key to enter the user interface, select the "Cloud Decrypt" in the function block interface, press the "OK" key, put the original card into the sensing area, and click the "Read" key to prompt that the decryption is successful, indicating that the card has been decoded online. Replace the IC and copy the card to the sensing area. Press the "Write" key to prompt that the card is written successfully. If the message "decryption failed" is prompted, you need to connect the computer to decode. 

3.ID card copy: 

Select the "Smart Copy" and click the "OK" key. Put the original card in normal use, click the "Read" key, and the message "Read successfully. Change the copy card according to the frequency prompted on the display, and then press the" Write "key, and the message" Write successfully "indicates that the copy is complete. 

4.Connect the computer to decode:

The machine is connected to the computer via USB cable, there is a disclaimer when it is turned on. At this time, do NOT press the "OK" button on the machine. Enter my computer, open the removable disk and display the software, the software instructions inside are copied to the computer. Double-click to open the software, and then press the "OK" button on the machine. 

NOTE: if you press the "OK" button before opening the software, the software will not be displayed.