Maple wood, wood tip | Stronger, straighter and last longer | Air kiln dried | Brick of 12 pairs

Provide lightning speed play with a stronger, straighter, and long lasting design | Made with the best maple found deep in the forests of China | Logged, air kiln dried, sanded, sealed and ready to make some thunder

Maple Wood, Wood Tip | Stronger, straighter and last longer | Air kiln dried | Brick of 12 pairs

Steel-reinforced plastic leg housing offers less weight and exceptional strength | Folding legs with plastic endcaps for durability and reduced floor vibrations | Steel midpoint locking clutch adjusts height from 32" to 61.5" | The long foldable legs Also make this stand ideal for the touring Pro!.

Our best selling stand, the MS7701B features a steel-reinforced plastic leg housing which offers less weight and exceptional strength | Folding legs with plastic endcaps for durability and reduced floor vibrations | Steel midpoint locking clutch adjusts height from 32" to 61.5" | 30" removable boom arm allows for easy positioning

Sleek European-syle mic clip made of hard plastic | For use with most dynamic microphones | Fits standard 5/8"-27 mic stands, goosenecks, booms and accessories

Easy to use mic clip with special low-profile open design creates a secure grip for dynamic microphones | Fits standard 5/8"-27 mic stands, goosenecks, booms and accessories | Has a functional elliptal shape and is made with durable plastic and brass female threads

Instantly connect or disconnect your mic clip or boom from your stand | Easy to use quik-release push button | Shock absorbing rubber washer | Standard 5/8-27" threading at both ends | Chrome color

Folding tripod base for convenient storage and travel | 13.5" x 19" bookplate with 2" return lip | Tension locking knob adjusts the angle of the bookplate | Mid-point clutch adjusts height from 24"-45" | High impact plastic leg housing | Tripod folding base for convenient storage and travel | Non-slip rubber feet | In order to operate the folding music stand, adjustments to the knobs, clutches, and folding tripod are necessary to set the stand to the desired position. Refer specification pdf given below for details.

Standard thread size fits most brand name ball-shaped dynamic microphones | Die-cast zinc sphere retainer rings | Durable wire mesh grille | Inner foam filter to reduce wind and breath "pop" noises

Friction locking knob adjusts length. Security pin for added safety | Height adjustable from 31 5/8-55 | All-steel construction | Upper shaft tubing: 1 3/8"lower shaft: fits 1 3/8" Sockets | Weight capacity: 80 lbs

Removable mounting block features a flat side to clamp to flat surfaces and a v-groove side to clamp to mic stands | Nylon tipped screw attaches clamp firmly to any desktop or stand 0.625"-1.625" | Removable mic clip adapter can be placed in 3 hole locations for optimal mic positioning

UPK300 picks are precisely scaled for its precise/specific ukulele application | The soft felt material is tough yet flexible and they feel great in your hand and produce exceptional sound on your ukulele, bass and other stringed instruments | Pack of three felt ukulele picks in various colors | Triangle shape measures 25mm x 30mm

UPK300 picks are precisely scaled for its precise/specific ukulele application | The soft felt material is tough yet flexible and they feel great in your hand and produce exceptional sound on your ukulele, bass and other stringed instruments | Pack of three felt ukulele picks in various colors | Triangle shape measures 25mm x 30mm

12 watt | 6 inches speaker | Dual gain controls | 3 band EQ | Master volume

Victoria features Grand Concert Body style, providing a vibrant and full sound | Quality Spruce top wood gives resonating tone and sound | Designed and inspected in Los Angeles, California

Make music anywhere with Orba by Artiphon, a handheld synth, looper, and MIDI controller | Loop Drum, Bass, Chord, and Lead parts to create songs on the fly | Use Tilt, Shake, Bump, and other gestures to play the touch-sensitive pads and control Orba with the way you move | Play through the built-in speaker or use the ⅛” jack to connect headphones or amplifiers | Pair wirelessly to the Orba App to customize your instrument and save your creations

MATERIAL - This Guitar Holder is made up of foam wrapped around the iron frame, which is stable and can protect the instrument, extended out so guitar will not touch wall. | SUITABLE for a variety of instruments - The Guitar Holder recommended for most acoustic & electric guitars, violins, ukuleles, bass's, banjos and mandolins. | SAFE SPACE - Mounting on the wall is not only beautiful but also saves space, suitable for both home and studio to use. | EASY TO INSTALL - Easy to assemble and install ,mounting screws included, and very stable. | DESIGN - Split design, freely adjust the angle of the guitar oblique hook.

Flexes Thumb Touches Intersection of Frog and Stick: A bent yet flexible thumb is key to tone production. This accessory directs the inside corner of the thumb tip to make contact with the bow at the intersection of the frog and stick, at a 45 degree angle to the bow stick. This position, with a bent and flexible thumb, allows the player the options to exert upward pressure to the stick and/or pushing against the frog on down bows to get toward the tip of the bow. | Supports Curved Pinky: A curved yet flexible pinky finger is critical to bow control, tone production and a relaxed bow arm overall. The pinky finger correctly approaches the stick from slightly to the rear, positioning the finger tip so the finger can remain curved and flexible without sliding off the front of the stick. This allows the player to easily move the bow to play at the frog, and to counter balance the weight of the tip of the bow while playing in the lower half of the bow. | Positions index finger to rest on bow: A correctly positioned index finger is key to bow control and tone production. This accessory ensures the index finger's contact with the bow stick will be between the first and second knuckles. This allow the finger to control downward pressure on the bow stick, as well as the pull on the front of the stick to control the straightness of the bow stroke. | Fingers Contact Bow in Customary Places: The empty spaces around the fingers of a correct bow hold tempt even the best beginners' fingers to wander without support. The fingers of the bow while using this patented accessory set are exactly in the same correct position as they will be when the accessory is no longer used. While the accessory set passively teaches the essential skill of the bow hold, students can proceed to learn and experience the many other skills and rewards of playing music. | Adjustable, Universal Fit -- for child to adult hand sizes: The thumb/index finger stabilizer (designed to look like a frog) is installed on the bow and intended to remain in a fixed position, while the Hold Fish is designed to slide along the bow stick to come to rest next to the ring finger. This positions the pinky finger correctly in the Hold Fish. As long as the child or adult player is playing approximately the correctly sized bow, the resulting bow hold will be correct.

Flexes Thumb Touches Intersection of Frog and Stick: A bent yet flexible thumb is key to tone production. This accessory directs the inside corner of the thumb tip to make contact with the bow at the intersection of the frog and stick, at a 45 degree angle to the bow stick. This position, with a bent and flexible thumb, allows the player the options to exert upward pressure to the stick and/or pushing against the frog on down bows to get toward the tip of the bow. | Supports Curved Pinky: A curved yet flexible pinky finger is critical to bow control, tone production and a relaxed bow arm overall. The pinky finger correctly approaches the stick from slightly to the rear, positioning the finger tip so the finger can remain curved and flexible without sliding off the front of the stick. This allows the player to easily move the bow to play at the frog, and to counter balance the weight of the tip of the bow while playing in the lower half of the bow. | Positions index finger to rest on bow: A correctly positioned index finger is key to bow control and tone production. This accessory ensures the index finger's contact with the bow stick will be between the first and second knuckles. This allow the finger to control downward pressure on the bow stick, as well as the pull on the front of the stick to control the straightness of the bow stroke. | Fingers Contact Bow in Customary Places: The empty spaces around the fingers of a correct bow hold tempt even the best beginners' fingers to wander without support. The fingers of the bow while using this patented accessory set are exactly in the same correct position as they will be when the accessory is no longer used. While the accessory set passively teaches the essential skill of the bow hold, students can proceed to learn and experience the many other skills and rewards of playing music. | Adjustable, Universal Fit -- for child to adult hand sizes: The thumb/index finger stabilizer (designed to look like a frog) is installed on the bow and intended to remain in a fixed position, while the Hold Fish is designed to slide along the bow stick to come to rest next to the ring finger. This positions the pinky finger correctly in the Hold Fish. As long as the child or adult player is playing approximately the correctly sized bow, the resulting bow hold will be correct.

Tones Features: Plump Full ,Sensitive Exquisite and Thick Sound. | Handmade alnico 5 single-coil-sized guitar humbucker pikcups, ideal for Neck / Middle / Bridge positions. | Resistance: 13-14K, fully wax potted and sealed to eliminate any unwanted feedback and noise. | White guitar pickup, fiber plate bobbin, 4-conductor PVC cable to facilitate complex pickup switching setups. | The pickup come with screws and springs, easy to install.

Universal fit for most turntables | Upgrade from stock cartridges | The Ortofon 2M Red is an all-purpose cartridge that delivers open, dynamic sound with a slight touch of warmth | The Ortofon 2M Red features an Elliptical diamond | Can be upgraded with an Ortofon Stylus 2M Blue

BEST SELLING – One of Japan's best selling musical Instrument Portable Synthesizer toys! | FUN & EASY TO PLAY - You can create different sound and pitch by pressing down the middle part of the Otamatone. By sliding down your finger up and down, you can create higher and lower tone. | Otamatone's face is made out of rubber, and by pushing his cheeks and making his mouth move around, the volume and the bass of the sound changes. | When you press the cheek, mouth will open. It is a musical insturment, you can enjoy the sound. | ※AAA Batteries ×3 (INCLUDED) ※Body Size: Approx 10.6" (27 cm)

LOVELY SWEETS EDITION - One of Japan's best-selling musical Instruments/Portable Synthesizer toys in three super cute sweet-inspired colors: Strawberry, Mint, and Chocolate! | FUN & EASY TO PLAY - Start learning to play your favorite songs easily by sliding your fingers along the stem to create a melody and squeezing the cheeks for vibrato | CREATE YOUR OWN SOUND - Play in a low, medium, or high pitch - get a band of friends together and create harmonies! | GREAT FOR ALL AGES - Kids, teens, and adults all love the Otamatone! Whether you’re brand new to music or an expert musician, the Otamatone offers a fun, silly new way to make music! (Battery NOT Included) | Powered By: 3 AAA batteries (Not Included)

Birch handles | Effortless projection | Grey rubber Head

The Package Length of the Product is 12.7 centimeters | The Package Width of the Product is 6.604 centimeters | The Package Height of the Product is 6.35 centimeters | Country of Origin: JAPAN

Brand: legere | Manufacturer Part: BC2.0 | Made from special polymer with a very fine microtexture | Lasts for months | Strength: 2

Strength: #2.5 | Has the properties of moist cane | Does not have to be Preconditioned before playing | Completely non-toxic | No risk, 30 day Exchange policy

An even more readable display, with a larger note name indication | A wide detection range supports tuning for any instrument | Calibration function is provided | Marks provided to indicate pure major And minor third intervals

🎸 ROTATABLE METAL CONNECTOR --- OTraki 1/4 inch straight to right angle guitar cord conductors is made of AWG22 OFC, provide low attenuation during the long distance transmission. The gold-plated plug is anti-oxidation and has more excellent conductivity; the pure copper protector be rotated to separated with gold partial, so that protect the soldered connect place better | 🎸 WOVEN INSULATE JACKET --- Our 10ft TS instrument cable used red+black / green+white nylon material with tweed woven design, more wearable than pvc made, ensure the use of safety and to solve the noise electromagnetic interference problem. And it has high tensile strength, can easy to folding for store | 🎸 STRONG COMPATIBILITY --- The 1/4 inch (6.35mm) TS plug can into the audio device that interface of 6.35mm diamater, suitable for Acoustic Guitar, Electric Guitar, Bass Guitar, Electronic Organ, Mixer, Power Amplifier, Pedal Effects, Equalizer, Speaker Systems, Studio Harmonizers, and other Unbalanced Instrument Cable Applications | 🎸 WELL PERFORMANCE --- Our guitar instrument cable has double shielded to reduce hum and noise, provide high stable performance and HIFI pristine sound when you perform in stage or bar. Tips: the both of straight and right angle plug can insert into guitar, you can choose it according to your device | 🎸 If you have any problems or any suggestion about our product, please contact us, we will reply you soon

🎸 Heavy Duty Metal Connectors --- OTraki straight to right angle 1/4 inch TS guitar cord conductors is made of AWG22 OFC, provide low attenuation during the long distance transmission. Gold-plated plug is anti-oxidant and more excellent conductivity, the pure copper protector is rotatable to protect the soldered connections better | 🎸 Tweed Woven Nylon Insulate Jacket --- Our 3ft instrument cable used red+black / green+white tweed woven nylon jacket, more avoid abrasion than pvc, to ensure the use of safety and to solve the noise electromagnetic interference problem. And it has high tensile strength, can easy to folding for store | 🎸 Strong Compatibility --- The 1/4 inch (6.35mm) TS plug can into the audio device that interface of 6.35mm diamater, suitable for electric guitar, electric bass, electronic organ, mixer, power amplifier, effector, decoder, equalizer and other electronic audio equipment | 🎸 Well Performance --- Our guitar instrument cable has double shielded to reduce hum and noise, provide high stable performance and HIFI pristine sound when you perform in stage or bar. The both of straight and right angle plug can insert into guitar, you can choose it according to your device | 🎸 If you have any problems or any suggestion about our product, please contact us, we will reply you soon

COMPREHENSIVE MASTERING: Create a loud, full master with seven multiband mastering processors, including deeper control in Ozone’s Maximizer. | CUSTOM PRESET: Use Master Assistant to help you get to an optimal starting point using the sonic profile of your audio. | ENHANCED WORKFLOW: Reference tracks and A/B directly within the Ozone workflow, never needing to leave the app for easier project management. | NEW ENHANCEMENTS: Redesigned user interface, improved Maximizer, Per-exciter mode, and more. | IZOTOPE SOFTWARE: Driven by a passion for audio, iZotope develops innovative products that inspire and enable people to be creative.

MASTERING MADE EASY: Get your mixes radio and streaming ready with best-in-class processing and new assistive technologies. | RICH FINAL MASTERS: Create a loud, full master with three essential mastering processors – Imager, Maximizer and EQ. | ASSISTANCE WITH CONTROL: Use Master Assistant to help you get to an optimal starting point using the sonic profile of your audio. | PRESET MENU: Kickstart your music project with a collection of professionally designed presets – choose from easy select menus for genre, delivery formats and more. | IZOTOPE SOFTWARE: Driven by a passion for audio, iZotope develops innovative products that inspire and enable people to be creative.

ADJUSTABLE AND COMFORTABLE: LPCP-8091 Official Licensing Pink Floyd Guitar Strap with genuine leather ends. Fully adjustable length from 39” to 58” long with plastic tri-glide that will not scratch your instrument. 2” wide guitar strap provides even weight distribution for your comfort. Made in Canada | COLOR AND DESIGN: Stand out with this unique and cool Pink Floyd Licensed guitar strap. Available in a variety of colors and designs. Bright vibrant design with official Pink Floyd artwork that will not fade. Check out Perri’s Leathers Pink Floyd Licensed Guitar Picks as well (search for item B01MYFPN89). | HEAT TRANSFER DESIGN: Strong, durable and very comfortable to wear guitar straps. Perri’s Leathers high quality, stylish straps are made to last for years to come. Expert workmanship | EASY TO ATTACH: Practical guitar strap that can be quickly and easily attached to any kind of guitar of all sizes. | MUSICAL INSTRUMENT ACCESSORIES: Perris guitar strap is an accessory that can be a great gift idea for any guitar player and musician. Check out Perri's Leathers guitar picks, bracelets and guitar pick key chains for more gift ideas.

SOFT SUEDE SERIES – 2. 5” inch wide soft suede with super soft sheep skin fur pad backing, adjustable length 38” to 53” inches long for Standard size and 41” to 56” inches long for Extra Long size | FIT, COMFORT & QUALITY – Adjustability and two available sizes means best proper fit to take weight load off shoulders and neck, very soft & comfy non-slipping suede backing strap gives even weight distribution, most comfortable strap even with heavy guitars and basses, strong durable non-slipping suede backing, reinforced around keyhole and adjustment slots, high-quality straps made in Canada which lasts after years of use | DESIGN & FEATURES - Vintage neutral plain look & design, quick and easy attachment to all guitar sizes small medium large xlarge oversized, variety of colors and xlong length choices: Black, Brown, Burgundy, Natural, Navy Blue, Purple, Red, Teal | MADE IN CANADA – Family owned business over 20 years in Concord Ontario, bespoke custom design & production for superior craftsmanship of straps & accessories like picks, keychains w/ pick, bags, bracelets, all suitable for teens, adult women & men, enjoy & be confident in long-lasting design & wise investment, sold worldwide | – Perri’s Leathers Ltd offers a replacement for defects in material, craftsmanship, or quality under normal use for 180 days from date of purchase with a replacement

Adjustable From 39" to 58" | Bright Vibrant Colors That Will Not Fade | Plastic Hardware That Will Not Damage Your Instrument

Adjustable From 39" to 58" | Bright Vibrant Colors That Will Not Fade | Plastic Hardware That Will Not Damage Your Instrument

Materials:Real high quality buffalo bone | Apply to Acoustic Electric Classical Guitar Bass guitar,Mandolin Banjo Ukulele | Saddle size: 80mm × 10mm× 3mm approx | Package includes: 6 x Bone Guitar bridge saddle blank, 2 x polishing paper.

Controlled tension; no buzz or string muting | Moves quickly and easily; stores behind the nut; made in the USA | Sleek design to control tension. Depth when capo is open is 1 1/8 (1.125) inch

Paint Shaker,AC Powered