Centre Frequency: 144/430;VSWR:< 1.5; Gain: 144MHz (3.0dBi),430MHz(5.0dBi); | Maximum Power Input-watts:100W; Antenna length :20inch; The flexible whip is stainless steel; | 144/430Mhz NMO Antenna Work for Motorola Kenwood Icom Vertex Blackbox HYT Hytera Mobile Radios. NMO to PL259 working for so239/uhf female Dual Band Radio. | The mount is a "trunk lid" mount with 13'/about 4m RG-58U cable. This requires a small (typically 3/8" to 3/4" ) hole be drilled through the surface hosting the mount, and is the best choice for an extremely rugged installation. | L-Bracket Hole Stainless Steel 3/4" NMO Hole Mount, L Bracket for HYS TCJ-N1 Coax NMO Mount Cable Mobile Antennas Car Truck Hood install. Stainless Steel L-bracket for Trunk Groove Or Side Mounting.

144MHz/430Mhz(136-174Mhz&400-470Mhz) Magnetic Base Antenna work for SO239 VHF&UHF mobile radio, Radio Scanner, Ham Radio Transceiver, Handheld & Amateur Radio Equipment. | Maximum Power Input-watts:50 W; Gain: 2.15dBi/3.5dBi. Omni-Directional, 43.5cm(17.12inches) Stainless Steel Antenna. | 3.5inch Magnetic Base ( Need the Metal Ground Plane), the magnetic base Easy to install, plug and play installation. | 144/430Mhz indoor and ourdoor Low-profile whip Antenna work for SO239 Motorola Kenwood Icom Vertex Blackbox HYT Hytera Baofeng Midland etc Two-Way Radio, Uniden Base/Mobile Scanner. | HYS antennas are individually Tested to insure proper compatibility with your Radio and Frequencies! HYS antennas are dependable, accurate, reliable and affordable.

Centre Frequency: 144/430;VSWR:< 1.5; Gain: 144MHz (3.0dBi),430MHz(5.0dBi); | Maximum Power Input-watts:100W; Antenna length :20inch; The flexible whip is stainless steel; | 144/430Mhz NMO Antenna Work for Motorola Kenwood Icom Vertex Blackbox HYT Hytera Mobile Radios. NMO to PL259 working for so239/uhf female Dual Band Radio. | NMO Mount Magnetic base:Height: 30mm/1.18";Base Diameter: 90mm/ 3.54"; Size 3.54" Magnetic Base Pull Strength 30.8 lbs, NMO Connection Style W/5M(16.4ft) RG58 Coaxial Cable PL-259 Plug. | HYS ANTENNAS are individually Tested to insure proper compatibility with your Radio and Frequencies! The magnetic base Easy to install, plug and play installation.

The HYS CB Antenna can increase the radio signal reception capacity. In addition, due to the high gain, the antenna can also enhance your radio’s signal transmitting ability, can greatly improve the signal transmission distance | Frequency: 27Mhz Max Power: 20Watt | Length: 16.1inch Connector: BNC V.S.W.R: LESS1.5 Polarization:Vertical | Compatibility For Cobra HH38WXST HH50WXST HH50 MRHH350FLT C75WXST Midland 75-822 75-785 MHS75 Uniden BC75XLT PRO401HH BC125AT | What you get: 1PCS XP-70 BNC CB Antenna. If you any technical or unsatisfactory problems, plz contact us by clicking “RADIO MAX” that below the "Buy Now", and find the button "ask a question"

The adapter for any 1/2” Hole; Materials: Copper and PTEE, ensuring superb durability and protection against wear and tear. | CB radio antenna mount adapter installs between the mount and antenna. | Standard 3/8" x 24" Threads Fit for all standard Antennas Mounts and Accessories. | The CB antenna mount fit Mobile/in-Vehicle CB Radio Antenna Mount standard 3/8" x 24 threads to fit Fire-stick antennas, which perfect fit for off-road vehicles, vans, trucks, RV, motorhomes, boats, and so on | Ideal for use by professional radio operators, hams, and CB enthusiasts, this stud mount is the perfect choice for any strong, secure and long-lasting antenna mount.

Radio clip Mount for Handheld Speaker mic&HT radio-Universal Round Knob, NOT WORKING for two way radio&mic with Belt cilp | Lightweight design,convenient to carry and use. Easy Install; Designed to be Mounted without Spacers or Bar Mounts | The hanger Holder mount stand is made of high quality, which is more attractive and durable. | 4Pcs of Mobile Radio remote Speaker mic Single T Tab Connection bracket, suitable for use in multiple cars, such as taxi, suv, truck etc. | This Mic Hanger Mount for Alinco, Anytone, Bao-Feng, Kenwood, Midland, Motorola, Uniden, Yaesu HT's & all CB two-radio& Marine Radio speaker mics with Round Knob.

Open Frame design allows user to hear ambient noise | Molded from hypoallergenic material | Available in three sizes (Small/Medium/Large) and accommodates rignt or left ear use | Comfortable deign for long-term wear. | Large, Medium, Small; 1 Pairs-Large, 1 Pairs-Medium, 1 Pairs-Small(Coil tube NOT included). The image is referenced to receive the earmold color as the standard.

HYS Dual band UHF/VHF 144/430MHz 2meter/70cm mobile transceiver antenna. | Connector type: SL-16 J (Male)/PL-259 | Dual Frequency 144/430MHz;Gain:2.15dBi (144MHz) ,2.5dBi(430MHz) | Length: 12.5inch | Each antenna will be tested more than threes times, all our product made of high quality material and provide excellent performance! we also provide 30 days no reason to return

Centre Frequency: 144/430;VSWR:< 1.5; | Gain: 144MHz (3.0dBi),430MHz(5.0dBi) ; Maximum Power Input-watts:100W; | Antenna length :20"; The flexible whip is stainless steel ; | 144/430Mhz NMO Antenna Work for Motorola Kenwood Icom Vertex Blackbox HYT Hytera Mobile Radios; | HYS antennas are individually Tested to insure proper compatibility with your Radio and Frequencies! HYS antennas are dependable, accurate, reliable and affordable;

Universal CB Antenna Mount, the adapter for any 1/2” Hole; Materials: Copper and PTEE, ensuring superb durability and protection against wear and tear. This cb radio antenna adapter is designed to fit any 1/2" hole and is compatible with antennas that have 3/8-24 threads. | The CB antenna mount fit Mobile/in-Vehicle CB Radio Antenna Mount standard 3/8" x 24 threads for Wilson wismec Fire-stick antennas, which perfect fit for off-road vehicles, vans, trucks, RV, motorhomes, boats, and so on | Made from high-quality aluminum material, ensuring durability and long-lasting performance, it offers excellent resistance against corrosion, rust, and even the harshest weather conditions. This ensures that your antenna mount remains in top-notch condition, no matter how extreme the environment. | HYS Truck Mirror Antenna Mount with 10mm Hole and elevate your CB radio experience to new heights. Whether you're a seasoned off-roader, a passionate traveler, or simply require effective communication while on the road, this antenna mount is a must-have. | Easy and quick installation Truck Mirror Antenna Mount. Simply attach it to your vehicle's roll bar or mirror using the included hardware. The mount's robust design a tight fit, preventing any unnecessary shaking or vibrations while on the road.

SO-239 Connection Style W/5M(16.4ft) RG58 Coaxial Cable PL-259 Plug | SO-239 Mount Magnetic base:Base Diameter: 225mm/ 8.8inch | Size 90mm*3(22.5cm 8.8inch) Magnetic Base Pull Strength 66 lbs | Suitable for all kind of SL16-MALE, UHF-MALE, PL259 antenna and SO239 mobile radio | The magnetic base Easy to install, plug and play installation.

[SUPER STRONG SPRING] Carbon steel construction, Heavy-Duty Barrel Spring | [Great Specifications] Standard SO-239 connector with 16.4'/About 5m RG-58 Coax Cable | [How to install] TWO U-bolts which can be used with the attached plate for pole mounting. | [INSTALL THE SPRING FUNCTION] The spring base reduces the damage done by impacts by allowing the whip to bend and flex out of the way. Such as the dense jungle, hard highway or off-road use etc. | [Compatibility] Working for the HF/UHF/VHF/CB Band Antenna, the antenna Standard UHF MALE connector.

Diameter: 90mm(3.5INCH); Connector: NMO (Not includes Antenna) | Magnetic Suction:14kgs(About 30lb) | Magnetic Base manufactured from anti-corrosive high strength plastic cover ,strong heavy duty magnet | Cable: RG-58 with PL259 Connector(5m about 16.4ft) | HYS magnetic base can be easy to installed and easy to use

3.5mm Listen Only Acoustic Tube Earphone; | Ear Tip MATERIAL: Soft and comfortable Silicon. Made of a durable, long lasting, hypoallergenic, medical grade polymer. | Earplug can be rotated left and right ears and wear comfortably. The earpiece allows the user to hear in high noise environments. | Works with standard, Incom, Yaesu, Alinco, Moto and Adi transceivers and also fits radio speaker mics, MP3 players and similar devices with 3.5mm connector. | This model of the HYS TC-617-1N listen only earphone is designed for law enforcement officers, firemen, EMTs ,Sports, Fairground and other professionals who wear their radio with a microphone on their shoulder or clipped to their shirt.

Left Ear and Right Ear Small Size Silicon Ear pier; Provides comfortable wearing for long periods of time. Save time, quickly replace. | Product color in this pictures are for reference purpose only, all goods will be based on the actual product received. | Made of a durable, long lasting, hypoallergenic, medical grade polymer. | Working for Motorola Kenwood, Puxing, Wouxun, BaofengTwo-Way Radio all Air Acoustic Coil Tube Audio Kits Earpiece. | Pack includes: 3Pairs Left Ear and Right Ear Silicon ear mold; (If any questions, plz contact us by clicking “RADIO MAX” that below the "Buy Now", and find the button "ask a question")

Fits any 1/2" hole and comes with 3/8-24 threads for easy installation and mounting | Durable and dependable cb radio antenna adapter for secure and long-lasting use | Installing the HYS SO-239 (UHF FMMALE) Stud Mount is both quick and easy. | This cb radio antenna adapter is designed to fit any 1/2" hole and is compatible with antennas that have 3/8-24 threads. | The CB antenna mount fit Mobile/in-Vehicle CB Radio Antenna Mount standard 3/8" x 24 threads for Wilson wismec Fire-stick antennas, which perfect fit for off-road vehicles, vans, trucks, RV, motorhomes, boats, and so on

Boost Signal: HYS 771FG tactical antenna made by high quality material, which can boost the signal for your device. | Tactical Design: antenna is foldable, when you're not using your device, you can easily store it. What is more, with a gooseneck, You can adjust any angle you like. | Compatible with AnyTone, BaoFeng, some Wouxun, and some Kenwood Walkie Talkie; Working for baofeng model number:GT-3, UV-5R, UV5RE, UV5RA,UV5R Plus UV-82L , BF-888S.etc | Specification:SMA-female Connector; Dual Band,144/430MHz; 18.7Inches; 2.15/3.2dBi and Max 20Watt input power. | The antenna is suitable for hunting hiking camping outdoor work. What you get: 1PCS HYS TC-771FG SMA-Female Antenna.

SO-239 Connection Style W/5M(16.4ft) RG58 Coaxial Cable PL-259 Plug | SO-239 Mount Magnetic base:Base Diameter: 110mm/ 4.3" | Size 4.3" Magnetic Base Pull Strength 30.8 lbs | Suitable for all kind of SL16-MALE, UHF-MALE, PL259 antenna and SO239 mobile radio | The magnetic base Easy to install, plug and play installation.

HYS Antenna are made by high quality material, it can significantly enhance the use range and signal transmission capability of your mobile radio. | HYS TC-40UV can work on both UHF and VHF band. It can work for most dual band mobile radio transceiver. | 100W max input power / 2.5dBi / 15.7 inch of length/Connector: SO239 (UHF-Female SL16-Female) | The product come with Mounting bracket, you can install it easily. | What you get: 1PCS TC40UV Outdoor antenna,1PCS Mounting bracket.

The mount is a "trunk lid" mount with 13'/about 4m RG-58U cable. | This requires a small (typically 3/8" to 3/4" ) hole be drilled through the surface hosting the mount, and is the best choice for an extremely rugged installation. | Recommended HYS NMO Antenna: NMO Antenna TC-HC152V (136-174Mhz) or TC-HC152U (400-470Mhz), easy install and match perfectly | Prefect for mobile FM transceiver NMO antennas. NMO to PL259 working for so239/uhf female Motorola Yaesu/Vertex Kenwood HYT Icom radio, the clip need a NMO HF/UHF/VHF/CB Antenna. | This is a high quality, low profile base mount that does the job very well. 13 feet NMO cable connected easily with the antenna and there is plenty of cable to reach an antenna mounted practically anywhere on your vehicle/car.

The mount is a "trunk lid" mount with 13'/about 4m RG-58U cable. This requires a small (typically 3/8" to 3/4" ) hole be drilled through the surface hosting the mount, and is the best choice for an extremely rugged installation. | L-Bracket Hole Stainless Steel 3/4" NMO Hole Mount, L Bracket for HYS TCJ-N1 Coax NMO Mount Cable Mobile Antennas Car Truck Hood install. Stainless Steel L-bracket for Trunk Groove Or Side Mounting. | Recommended HYS NMO Antenna: NMO Antenna TC-HC152V (136-174Mhz,B077HRNLHZ), TC-HC152U (400-470Mhz, B077HXNJ1F ) or HYS SDN1(144/430Mhz, B07P71M8M5), easy install and match perfectly. | Prefect for mobile FM transceiver NMO antennas. NMO to PL259 working for so239/uhf female Motorola Yaesu/Vertex Kenwood HYT Icom radio, the clip need a NMO HF/UHF/VHF/CB Antenna. | This is a high quality, low profile base mount that does the job very well. 13 feet NMO cable connected easily with the antenna and there is plenty of cable to reach an antenna mounted practically anywhere on your vehicle/car.

Centre Frequency: 144/430;VSWR:< 1.5; Gain: 144MHz (3.0dBi),430MHz(5.0dBi); | Maximum Power Input-watts:100W; Antenna length :20"; The flexible whip is stainless steel; | The mount is a "trunk lid" mount with 13'/about 4m RG-58U cable. | This requires a small (typically 3/8" to 3/4" ) hole be drilled through the surface hosting the mount, and is the best choice for an extremely rugged installation. | 144/430Mhz NMO Antenna Work for Motorola Kenwood Icom Vertex Blackbox HYT Hytera Mobile Radios.

UHF:400-470MHz;VSWR:< 1.5. | Gain:2.5dBi; Maximum Power Input-watts:150W. | 400-470Mhz Antenna Work for Motorola Kenwood Icom Vertex Blackbox HYT Hytera Mobile Radios | The mount is a "trunk lid" mount with 13'/about 4m RG-58U cable | This requires a small (typically 3/8" to 3/4" ) hole be drilled through the surface hosting the mount, and is the best choice for an extremely rugged installation.

VHF:136-174MHz;VSWR:< 1.5. | Gain:2.5dBi; Maximum Power Input-watts:150W. | 136-174Mhz NMO Antenna Work for Motorola Kenwood Icom Vertex Blackbox HYT Hytera Mobile Radios | The mount is a "trunk lid" mount with 13'/about 4m RG-58U cable | This requires a small (typically 3/8" to 3/4" ) hole be drilled through the surface hosting the mount, and is the best choice for an extremely rugged installation.

VHF:136-174MHz;VSWR:< 1.5. | Gain:2.5dBi; Maximum Power Input-watts:150W. | 136-174Mhz NMO Antenna Work for Motorola Kenwood Icom Vertex Blackbox HYT Hytera Mobile Radios | The mount is a "trunk lid" mount with 13'/about 4m RG-58U cable | Stainless steel brackets and corrosion resistance hardware

[High Performance Mobile Antenna]:All HYS antenna are made by high quality material and produced by professional equipment.HYS R2S Antenna can effectively increase your mobile radio and transceiver range of use. | [Tri-Band Antenna]: HYS-R2S can work on 137-174/180-260/400-480MHz. Tri-Band design make it easy to be compatible with more mobile radio. | [Telescopic Design]:HYS-R2S is a telescopic antenna.With the telescopic design, it can get both high performance and easy carry. | [Other Specifications]:Connector:PL259(UHF-Male)Connector, VSWR:Less than 1.5, Gain:2.5/5.2dBi. | [What you get]: 1PCS HYS-R2S Antenna.If you have any technical or unsatisfactory problems, plz contact us by clicking “RADIO MAX” that below the "Buy Now", and find the button "ask a question".

Antenna Frequency: 136-174/ 400-470Mhz /Maximum Power Input-watts :100Watt/Gain:2.15dBi/VSWR:Less than 1.5 | Antenna Length:21inch Connector: NMO | The mount is nmo connector and the cable is 13ft RG58 cable with PL259 connector. With the L shape fender mount, you can easily install it on your car | Mount is made of stainless steel, can effectively prevent corrosion and deformation, very reliable and durable | Compatible with Motorola Kenwood Icom Vertex Yaesu TYT HYT transceiver or mobile radio work on VHF UHF

Marine Antenna VHF 156-163MHz, 2 dBi signal with up to 50W of power; | W/16.4ft(5m) RG58 Low Loss Premium Coaxial Cable With PL259; | VHF Rubber Antenna Designed for any 156-163MHz device for receivers, 156-163MHz antenna for 156-163MHz device receivers to improve signal in receiving and transmitting. | Stainless Steel L-bracket&U-bolts, it comes with U-bolts which can be used with the attached plate for pole mounting. | The antenna does not come with mast pole mount; it comes with TWO U-bolt which can be used with the attached plate for pole mounting. | Comes with mount and screws, easy to carry and install, the body of the VHF Marine Antenna makes it highly resilient to your Boat, Yacht etc use. | HYS VHF Marine Antenna made of high quality rubber with cable and clip, it will help you get longer communication range.

Marine Mounts mate with standard 1”14 thread mount. | 316 Stainless steel: Marine grade 316 stainless steel, rust-proof, corrosion resistance, oxidation resistance. | Excellent seawater corrosion-resistant and durable. Made from long lasting, top grade electro-polished 316 Stainless steel to a beautiful mirror-like finish. | This Extra Heavy Duty Ratchet Mount was originally developed to accommodate the big Marine antennas. Extra Heavy Duty construction Two-way ratchet design with handle for deck or bulkhead mounting. | Packaging: 1x Marine VHF Antenna Mount, 4x Screws. We provided screws for you to install, you can choose or replace the screws according to your actual situation, the screws not applicable to all boats. (Screws are made of 316 stainless steel).

VHF-Marine Antenna VHF 156-163MHz, 2.5 dBi signal with up to 50W of power; W/16.4ft(5m) RG58 Low Loss Premium Coaxial Cable With PL259; | VHF whip Boat Antenna Designed for any 156-163MHz device for receivers, 156-163MHz antenna for 156-163MHz device receivers to improve signal in receiving and transmitting. | Stainless Steel L-bracket&U bolts, it comes with U-bolts which can be used with the attached plate for pole mounting. | The portable vhf antenna does not come with mast pole mount; it comes with TWO U-bolt which can be used with the attached plate for pole mounting. | Comes with mount and screws, easy to carry and install, the body of the VHF Marine Antenna makes it highly resilient to your Boat, Yacht etc use

UHF Base station antenna directional, high-gain vertical polarization made of aluminum alloy. Length: 725x 380x 48mm. | YAGI Antenna UHF 400-470MHz, 9 dBi signal with up to 100W of power; with UHF Female Connector; | Comes with mount and screws, easy to carry and install, the body of the Yagi Antenna makes it highly resilient to outdoor use. | Aluminum alloy material: HYS TC-YG05 antenna is made of durable materials to withstand various weather conditions in order to provide long lasting product life. HYS UHF Yagi Antenna for outdoor use and waterproof. Rated wind velocity 60/m. | HYS UHF Yagi Antenna for use with repeater systems, data radio, base stations, mobile radio, two-way radio etc. Yagi antenna will significantly increase the range of your device. UHF YAGI antenna working for 400-470Mhz mobile car radio/2-way radio, such as Kenwood Motorola, AnyTone, BaoFeng, Wouxun. Not Includes: coaxial cable and radio.

Whip Antenna 2 Meter/70cm;Gain:2.15dBi (144MHz) ,2.5dBi(430MHz) | Maximum Power Input-watts:20W (Ham radio less than 20W) | Radios that are GUARANTEED to work are the MODEL NUMBER: baofeng uv-5r, bf-f8hp, uv-82, bf-888s, 888S, uv-82hp, bf-f8+, uv-5r Series, uv-82 Series | Compatible with AnyTone, BaoFeng, some Wouxun, and some Kenwood Handheld Radios | HYS antennas are individually Tested to insure proper compatibility with your Radio and Frequencies! HYS antennas are dependable, accurate, reliable and affordable.

DUAL FREQUENCY 144/430MHz;Gain:2.15dBi (144MHz) ,2.5dBi(430MHz); VSWR: <1.5; | MAXIMUM POWER INPUT-WATTS:10W;it can help your handheld Radio extend the talk distance; | Compatible with some BaoFeng, some TYT, and some Yaesu Handheld Radios; | ANTENNA CONNECTOR TYPE SMA-Male with SMA FEMALE Radio VX-3R, VX-6R, VX-7R, VX-8R, VX-150, FT-60R, VX-160, VX-180, VX-400, VX-300, VX-800, FT-270R, FT-250R, VX-230, VX-8DR, VX-8GR, FT-277R; | HYS ANTENNAS are individually Tested to insure proper compatibility with your Radio and Frequencies! HYS antennas are dependable, accurate, reliable and affordable.

Durable and corrosion-resistant: Made of 316 stainless steel, this marine base is built to last and withstand harsh marine environments, ensuring your antenna stays securely in place. | Adjustable Ratchet Design: With a versatile and reliable toothed ratchet adjustment mechanism, you can easily adjust the angle and direction of your antenna, ensuring better signal coverage. | Convenient and User-Friendly: The handle on this stainless steel marine base has a smooth rotation angle, making it easy to adjust the antenna orientation and direction. | Ideal for Boats and Yachts: The base measures 2.36 inches by 3.45 inches, making it perfect for boat, yacht, and other marine installations. It can also be used with a wide range of antenna types and sizes. | Pack includes: 1pcs Mairne Antenna Mount, 4pcs screws (If any questions, plz contact us by clicking “RADIO MAX” that below the "Buy Now", and find the button "ask a question")

Heavy Duty Design: the use of high-quality materials, durable corrosion resistance, long service life | Great Compatibility: Work for most CB/Mobile radio microphone with round knob, and most of walkie-talkies with back clip | Easy Installation:Adhesive back and self-tapping screw installation make the holder stable after installation | Adjustable Design:The Angle of the holder can be adjusted through the spherical structure, which is convenient to use | What you get: 1PCS HYSHIKRA Radio Bracket. If you have any technical or unsatisfactory problems, plz contact us by clicking “RADIO MAX” that below the "Buy Now", and find the button "ask a question"

【Perfect Fit】- The kindle paperwhite case expertly designed to fit the all-new Kindle Paperwhite or Kindle Paperwhite Signature Edition 6.8" (11th Generation only), ensuring a snug and secure fit.To avoid buying the wrong case, please check the back bottom of your device. Not fit other prior generation Kindle devices. | 【Premium Material Protection 】- The kindle paperwhite signature edition case clear is made of durable thin TPU material, Ultra-slim protective case, flexible and protective. Extra protection with unique four-corner thickening design. | 【Precise Cutouts】-The clear kindle paperwhite case raised edges at the four corner provides extra protection for kindle paperwhite case screen glass and camera. Precise cutouts for all ports, buttons and speaker allow full access to all features and controls without having to remove the cover. | 【Ultra-Slim & Lightweight】: Clear kindle paperwhite case adds minimal bulk to your Kindle, preserving its sleek and portable appearance, making it easy to carry wherever you go. | 【DIY Back Cover】: Paperwhite kindle cover clear look feature will bring you more convenience for keep the natural beauty of the tablet and DIY the back shell by cute stickers with lovers.

【2.4G mouse Plug and Play】LED wireless mouse no need to install any driver, just plug the USB receiver into your laptop will the mouse start to serve. 2.4GHz wireless technology provides powerful and reliable connection, effective up to 10 meters of range. | 【3 Adjustable DPI Values】This computer nouse with ( 1600, 1200, 1000) resolution Optical tracking technology provides sensitivity and precise tracking on a wide range of surfaces. The wireless mouse Meet your multiple needs, either for daily work or gaming. | 【Rechargeable Optical Mouse】Wireless mouse built-in durable rechargeable battery, it can be easily charged using the included USB cable without replacing the battery. Just 2 hours charging, you can use it about 7-15 days. Standby time is very long, energy-saving features, automatic sleep mode and wake-up mode are installed to save energy. Turn off the mouse LED light when not in use to save power. | 【Slim&Comfortable Design Mouse】 Cordless mouse have good surface coating technology gives you a skin-like touch. The wireless mouse for laptop ergonomic design provides 24 hours comfort for your work and study, and the portable and pocket size are perfect for you.Built-in battery,easy to charge by usb cable,no more need for extra AAA battery.It can be easily activated by clicking any buttons. | 【7 Colors Breathing lights】 The upgraded version portable mouse with the LED lights adds more fun to the boring office life. The bottom of the mouse has a switch, you can switch lights freely. Low-key or sparkle, switch in one second, suitable for any occasion. | 【System Requirement】To use this usb mouse, your computer must following hardware requirement an run one of the operating systems listed below. Hardware: PC with USB2.0 and above. Note: The scroll wheel only works under the operating systems listed above. If you use the mouse under the operating system, the laptop mouse neither works nor keeps its enhanced features. | Note: When the 2.4GHZ wireless optical mouse is not used for a long time, the wireless receiver can be stored at the bottom of the mouse to prevent loss.

彡[Super desk Fan] : The mini table fan is 16*12*9 cm/ 6.24*4.68*3.51 inch in size and 6.87 oz in weight, compact and lightweight personal fan, space-saving on desk and easy to carry around, suitable for home, office, desk, car, camping, travel and as a gift. | 彡[3 Speeds Office Fan] : The small desk fan has low/medium/high speed levels, Press the back botton to get the fan speed you like. The usb desk fan with variable speed design provides powerful wind to cool you down quickly on summer. | 彡[45° Adjustment Small Fan]: This personal fan can rotate 45 degree up and down, Free to direct the airflow where you want and provide you comfortable cooling airflow on summer. | 彡[Ultra Quiet Fan] : HZD small quiet usb fan provides strong airflow and the noise is less than 50d, which willn't disturb yourself when you're working or studying. The mini quiet usb fan is a good companion which is quiet and comfortable for you. | 彡[USB Powered Fan] : The desk usb fan comes with a 4.9-foot USB cable that is compatible with all USB ports such as laptops, mobile power, AC adapters, car chargers, and other USB-enabled power sources. (Note: This small desk fan does not come with a battery) | 彡[What You Get & Warranty] : HZD personal desktop fan, user manual, service card, 4.9ft usb cable, sturdy packaging. If the fan stop working, please feel free to contact us and we will RESEND YOU A NEW FAN! | 彡[Anti-slip design]: Four anti-slip pads on the bottom of the base help reduce vibration, reduce operation noise and increase friction.

REPLACEMENT, AC-L10,AC-L10A,AC-L10B,AC-L10C AC-L15,AC-L15A,AC-L15B,AC-L15C AC-L100,AC-L100B,AC-L100C,AC-L100D | APPLICATION, AC adaptor for your compact Handycam camcorder.Provides continuous power for extended video shoots,Ideal for use while transferring video footage to a computer | ADVANTAGE, Compact, lightweight, and designed for travel£»Made of high quality plastic, copper wire and metal materials.Already available FCC,CE etc Certification | PARAMETER, Worldwide Input voltage: AC 100~240V, 50~60Hz£»Output: DC 8.4V/1.5A | Package included. 1x slim charger, 1x ac cable