Compatible with Olympus OM-D E-M1, E-M5 Mark II, E-M5, E-M10 Mark II, E-M10; PEN PEN-F, E-PL8, E-PL7, E-PL6, E-PL5, E-PL3, E-PL2, E-P5, E-P3, EP-1, EP-2, E-PM2, E-PM1, E30, E100, E400, E410, E420, E450, E510, E520, E550, E600, E620, SP-510UZ, 550UZ, 560UZ, 565UZ, 570UZ, 590UZ, 810UZ, XZ-1, XZ-2, Stylus 1, Stylus 1s, SP-100EE, SH-60, SH-50, SH-1, SH-2, SZ-31MR, SZ-30MR, SZ-20, SZ-14, SZ-11, SZ-10, SH-21, SH-25, rm-uc1(NOT fit Olympus E-M1X, E-M1 Mark II / Mark III, E-M5 Mark III, E-M10 Mark III) | Shutter release cable length: 120 CM. The shutter cord shooting mode: single shooting, continous shooting and long exposure (BULB) | Shutter control: support half-press (starting AF), full-press to take a photo, lock the shutter. Users can utilize according to actual shooting situations to get a better shooting | Better hand-feel and more accurate shooting: thoughtful ergonomic design, the notch at the back is ideal for most of the people's hand type | Wired remote rm-uc1: Eliminate vibration and increase image clarity with this wired remote for Nikon cameras

Attachable to a range of different photography accessories such as studio light stand, hotshoe/coldshoe adapters, ball heads, wireless flash receivers, triggers and more | Precision made spigot with 1/4" male to 3/8" male threaded screw adapter | Easy to assemble and disassemble by hand | All-metal material, electroplated surface, anti-wear, anti-oxidation, durable features | Approx. Dimension: 2.8inches/7cm, Weight: 5.8oz/164g

⚡【5V 1A Power Supply/Adapter】100-240V AC input 50/60HZ, DC 5V 1Amp(1000mA) output, 5Watt max wattage.The power supply has load and no load.Generally,4.5V-5.0V is Normal.[The device voltage must be equal to 5V, and the current can be less than or equal to 1A] | ⚡【Multi Protection】Over current protection, over voltage protection and overload protection, short-circuit protection.If the parameters in the circuit exceed the upper limit of 5V 1A(1000mA), the product will not work.[Before ordering, please check whether the voltage and current of your device are the same as our product parameters.] | ⚡【WIDE APPLICATION】5V Power Supply 1A is widely use for LED light strip,Wireless Routers, ADSL Modem, HUB,Security Camera, Network Switch, Audio/Video power supply, home decoration use, car, hotels, clubs and shopping malls etc. | ⚡【Not DC to AC】 This 5V 1A Power Supply is AC to DC, not DC to AC. Please confirm which one is needed. | ⚡【PACKAGE INCLUDES】 1 x 5V 1A Power Supply itself has a 3 ft DC output cable.It comes with a free female DC connector. So you can easily connect wires on it without soldering. Check the power input port of your device.the polarity is Inner Positive (+),Outer Negative(-),DC output plug 5.5 x 2.5mm/2.1mm. (Check your DC Plug Size Before Order!)

QUICK RELEASE: Allows for fast and convenient attachment and detachment for your camera strap when needed. | DURABLE: The quick release clip is made of alloy and the quick release lug ring is made of stainless steel. Together they have a breaking force of up to 33 lbs! | COMPATIBLE: Suitable for any small and/or mirrorless camera. | EASY INSTALLATION: Attach the lug ring to either your camera strap or camera and click the clip in place. | COMES IN A SET: This product comes with 2 clips + 2 lug rings per set. The quick release clip’s dimensions are 2.5cm x 1cm with a diameter of 0.5 cm. The quick release round lug ring’s opening width is 3mm.

Perfect Fits: Square Contactless and Chip Reader, Square Reader for magstripe (with headset jack) and USB Cable. not for SumUp Card Reader, Suitable size does not exceed Internal dimension: 2.7''x2.5'' in(7cm*6.5cm), case only, not include the device. | Safe Guarantee: Premium hard EVA material covered by quality PU material, is not only semi-waterproof, shockproof, but also with a comfortable soft touch. This travel hard case can protect card reader scanner from dust, scratches, scuffs, shock, crush and moisture. | Travel Ready: This chip card reader case is lightweight and compact to fit in your pocket, carry-on or luggage for improved traveling protection. | Convenient：Removable carabiner for portability, Inner mesh pocket for accessories. | For sale is case only, the card reader is not included. Package Contents: Chip Card Reader Scanner Case X 1, Carabiner X 1

【1】Adapter Using ultra precision CNC machine tools,sophisticated material,high intensity,good operation stability,this Camera Lens Adapter is made of high quality aluminum alloy,durable,non deformation,also with corrosion resistant and glossy. | 【2】AMOTOK The ring adapter easily screws onto the front of any 46mm lens,and converts the thread size of your lens to the thread size of any other 40.5mm accessory(such as filters,hoods,flashes and lens converters),and other 40.5mm accessories. | 【3】Compatible with:all 46mm camera lenses & 40.5mm accessories(UV,CPL,ND,Lens Hood,Threaded Lens).Your lens thread size will be printed underneath your lens cap or written somewhere on the lens barrel.This number is always prefixed by a"O"(diameter) symbol.For example:Ø46mm=46mm lens thread.This number can be found on the back of your lens cap.Make sure you order the correct size otherwise it will not fit your lens. | 【4】The first number of an adapter ring is always the lens thread size,the second number is the filter size of the accessory.If the first number is bigger,it's a Step-down ring What is a step up ring?Step up rings,also known as adaptor rings,allow you to use filters and accessories that are not the same size as your cameras lens. | 【Notice】46mm lens: Make sure your Camera lens size is 46mm, and the filter size is 40.5mm, so choose the 46-40.5mm adapter ring, but not 40.5-46mm adapter ring.

【Bluetooth 5.0 Transmitter Receiver】The Bluetooth transmitter transmits audio wirelessly to bluetooth headphones / speakers. Bluetooth Receiver turn the traditional speaker into bluetooth speaker. Works with device with 3.5mm interface, only Bluetooth 5.0 is supported. When connecting, keep the product close to the paired device for better connection, when used on PC, use USB charging data. In TX mode, confirm that headset or speaker is in the status where Bluetooth can search for connection. | 【Latest Bluetooth Transmitter】 When the USB charging data cable is plugged into PC, it can be used as a transmitter to transmit audio, enabling the computer to have bluetooth function. Proper ear bud fit and software update can help in reducing noise issue, make sure the earbuds and phone or any other device have the latest software version installed. The product that does not work may have insufficient initial battery power. Please try to use it after fully charging. | 【Always On】 Bluetooth 3-in-1 Adapter continuously streams even while charging. Built-in battery for up to 10 hours use - enjoy your favorite wireless content all the time. The red indicator light is always on when charging, volume buttons don't work, and the indicator is off after charging is completed. The common ground current noise may cause noise. We suggest not to use it while charging to avoid the current noise. It's better to wait until it's fully charged before using it. | 【Bluetooth Everywhere】 With the updated V5.0 EDR technology, our wireless audio adapter enables more stable connection with device. Only 1 device can be paired at a time, it does not transmit to multiple devices, the distance between the bluetooth adapter and your bluetooth device should be within 50 feet. The charging standard of the product is 5V1A. Do not use a high current adapter to charge the product. | 【Note】When directly using the USB charging cable to transmit audio to the computer, you do not need to use a 3.5mm audio cable to connect to the computer. Directly using USB cable to transmit audio to the computer, the computer system volume cannot be adjusted, only volume of software can be played. Pay attention to whether you want to receive or transmit when you use it. Don't make a mistake. RX to receive, TX to transmit, and there will be no sound when you connect incorrectly.

Direct replacement antenna base bezel. | Radio antenna base nut fit for FJ Cruiser 2007-2014 (LHD), 2010-2017 (RHD). | Part Number: 8639235032. Supersession(s): 86392-35032; 8639235031. | Flexible rubber antenna base tighten your antenna from wiggling all around. | Easy to install. Perfect replacement for the original.

14 I/O Pin (servo type with GND, power and signal) | 8 analog Pin with power output and GND | 6 PWM Pin | 1 Servo power input | 5 I2C expansion Pin

【Compatibility】Compatible with all 67 camera lenses & 82mm screw mount accessories (such as filters, hoods, flashes and lens converters). Your lens thread size will be printed underneath your lens cap or written somewhere on the lens barrel. Make sure it is 67 mm otherwise it will not fit your lens. | 【Problems Solved】The lens filter adapter rings allow you to fit a larger size (82mm) lens filter or other screw mount accessories onto a lens with a smaller diameter (67mm). The purpose is to increase the diameter of the lens, cost saving. | 【Material】Special aviation aluminum alloy, high strength, impact resistance, distortion and pressure resistance. Greatly reduces the main thickness and weight. The surface is subject to high mesh mechanical sandblasting, environmental protection anodizing, and the color is pure dumb black. | 【2 Pack & Cleaning Cloth】67mm Lens to 82mm Filter,and High-quality Soft Cleaning Cloth. | 【Guarantee】Provide return and replacement protection. Please contact us if you have any questions about the product (damaged items are received, installation is not successful, etc.), and we will give you a satisfactory service.

A shoe mount adapter screwed on the end | 360° rotatable & 90° tiltable mini ball head | Mini ball head with 1/4"-20 screw connector | Material: aluminum alloy and CNC machined

Rearview mirror power cord includes three specifications of pins, select the appropriate pin, and plug and play without trimming. | Built-in fuse makes the power line connection of radar detector more stable. | Cable length is 16 inches, the attached cable tie can easily tidy the cable and keep the appearance clean. | Mirror line interface adopts integrated injection molding to protect the connector from damage, which is not only exquisite and beautiful, but also convenient for plugging. The thread body is made of environmentally-friendly PVC, non-toxic and tasteless, with high flexibility,It is not easy to knot when winding at will, strong and tensile, and more durable. | DC3.5 radar installation mirror line is suitable for Cobra RAD 350 380 450 480i XRS9370 XRS955 XRS5300 XRS7700, Uniden DFR1 DFR3 DFR5, Whistler radar detectors.

67mm lens hood for Canon, Nikon, fujiFilm, Olympus, Pentax, Sony, Sigma, Tamron & More | The addition of a lens hood can help prevent flares-those circles of light that can accompany images where a strong light source is just outside the frame | Professional tulip shape design (also known as 'flower' or 'petal' shape) allows for greater versatility- Reduces Flare - Screw mount : Easy to attach and take off - Maintains Exposure Levels | Fits all 67mm lenses - Please verify your camera's lens thread size before ordering. Your camera's lens thread size will be marked somewhere on the lens barrel or printed underneath your lens cap. This number is always preceded by a "Ø" (diameter) symbol. | Package includes : 67mm Tulip Flower Lens Hood + 67mm Soft Rubber Lens Hood + Cleaning Coth

【Three Light Modes】This mini usb led rgb light has three modes. If you choose solid color fixed mode, the color and brightness stay the same. And if you choose 8 colors breath mode, the color and brightness will change by itself. The last mode is quite similar with the solid color fixed mode, but it will change brightness in one color. | 【8 Colors Gradually Changing】When you insert this Type-C light, it will start with red color and gradually change colors. Colors don't change by itself? Don't worry, tap the button and change the color. When the color go through a cycle which means going back to red color, it will automatically change colors again.When the color that you choose lasts 10 seconds, it will remember this color, so next time when it turns on it will still keep this color. | 【Fits Any Equiment With Type-C Ports】When you use it in car, it shines downward to light up your footwell area so they won't blind you at night. And it also works with any powered Type-C. Any Type-C ports are available. | 【Easy To Operate】Double tap to change the light mode between solid and breath. In color changing situation, one tap will change the light into single color and another tap will change the color.After three taps,the light will turn off. | 【Light Sensor and Consumption】When the sensor senses the strong light, it will turn off after 10 seconds by itself. And if it is in dark environment, it will turn on automatically. The output power of the light is just 0.1W.

The Ram VersaMount allows you to mount a CB microphone in a safe, convenient and easy to reach location. | Metal Hook Stick to Car Package includes: 1 x Black CB Versatile Mounting Bracket Holder,1 x Cobra 75 WX ST CB mic clip (Include Screw),2 x Wipes remove excess dirt | CB Mic Holder Material: Metal with black coat finish | CB Mic Holder Color: Black | CB Mic Hanger Fit For Cobra 75WXST CB

Audiopipe In-Line Bass Blocker Filters | Non-Polar 10% Capacitor | Used with 3.5" to 4" Speakers | Reduces Bass Frequency below 2.8 kHz

【High Quality】Professional manufacturing, exquisite workmanship, this Camera Lens Adapter is made of high quality aluminum alloy, durable, non deformation, also with corrosion resistant and glossy.Extinction method: professional-grade lens matt paint on the inner wall .External coating: black part hard oxidation process | 【Unique Design】AMOPOFO The Reverse Mount Ring allows you to mount a Mounts lenses with Ø 67mm filter thread to a Nik DSLR Cameras. Besides for making financial sense, this allows you to use your favorite lens across different camera platforms, the Reverse Mount Ring is designed to fit securely to the lens, yet can still be removed easily when not needed. | 【 Suitale For】Niko D7500 D7100 D7000 D5600 D5200 D7200, D5500,D750,D810,D5300,D3300,Df, D610 DSLR Cameras Mounts Any lenses with Ø 67mm filter thread to a Nik DSLR Cameras | 【NOTICE】:Autofocus, automatic aperture and AE metering will be DISABLED. Need to focus manually and set exposures manually. Shoot with manual mode or aperture priority mode.

Dual Band WiFi Antenna : 2.4GHz 5GHz 5.8GHz MIMO SMA Male Antenna | Gain: 8dBi | Package: 2pcs Omni directional wifi antenna | Note - The antenna connector is SMA Male [a pin in connector center ], please check it before purchase. | High gain wifi antenna is good for Wireless Vedio Security, IP Camera Recorder, Surveillance Recorder ,Truck Trailer, Rear View Backup Camera Reversing Monitor, wifi camera, FPV Drone, Wireless HDMI Extender, mobile broadband device etc. | Extend Bluetooth Range: improve coverage and reception stability for your Bluetooth devices, like Bluetooth headphones, headset, wireless controllers ,Bluetooth network card, Bluetooth Audio HiFi Speaker Music System etc. | Never worry about any security problems. We are confident in the quality of our motherboard antenna and willing to provide 1 MONTHS Replacement Warranty and 100% Satisfaction Guarantee. If you unfortunately get a defective one, please contact our customer support.

【COMPATIBLITY】 Fits SanDisk Extreme Pro / SanDisk Extreme Portable External SSD Perfectly! This hard case can store and protect 2 SanDisk SSDS at once. Compatible models: SanDisk Extreme PRO Portable SSD - SDSSDE81 | SanDisk Extreme Portable SSD - SDSSDE61 | SanDisk Extreme PRO Portable SSD - SDSSDE80 | SanDisk Extreme Portable SSD - SDSSDE60 (500GB 1TB 2TB 4TB). Interior size: 4.75 x 2.4 x 1.05 inches. | 【EFFECTIVE PROTECTION】Constructed of semi-waterproof polyester fabric and EVA material which makes the shell serviceable and easy to clean, effectually protects your SanDisk Extreme PRO SSD against damages from splashing and dropping. Soft lycra and shock absorption bubble lining interior provide you with better cushion that keeps your devices free from daily bumps dents and scratches! | 【EXQUISITE DESIGNING】 Handy and compact case comes with a comfortable wrist strap for easy carrying on wherever you go. Smooth and durable dual metal zippers make it easy to open and close. Elaborate and convenient design makes it ideal and safe to carry for travelling! | 【ENOUGH STORAGE】 Featuring a separate built-in mesh pocket to store your USB cable, charger and other practical accessories, also boasts extra plastic slots to place SD cards memory cards or other smaller but essential widgets, all of devices will be placed snugly and securely! | 【LACDO GREAT COMPANION】A delicate gift for your beloved family and friends. A portable and comfy hard drive case which perfect for work and daily life, business trips, traveling or home storage. A reliable companion being always with you. Lacdo after-sales team provides you with 12 months free return and exchange service.

25-FEET (7.62m) [ BLUE 8 GAUGE POWER/GROUND WIRE ] - The lower the gauge number, the thicker the wire. Thicker wire presents less resistance to current flow. | COPPER CLAD ALUMINUM (CCA) - CCA wiring provides a good conductor for power transfer. This is the most economical option when choosing power or ground wire. Systems that require more power should consider OFC wiring. | RUGGED PVC JACKET - Allows free, wide and seamless adjustment of the required physical properties of this wire such as flexibility, elasticity, and impact resistance. | EASY POLARITY IDENTIFICATION - This two color jacket allows for easy polarity identification. Making a polarity mistake could be damaging to your audio equipment. | SOFT TOUCH JACKET - The jacket on our cable is designed with the installer in mind. The flexibility of this jacket allows for easy routing and has a low memory.

【COMPATIBLITY】 Fits SanDisk Extreme Pro / SanDisk Extreme Portable External SSD Perfectly! This hard case can store and protect 2 SanDisk SSDS at once. Compatible models: SanDisk Extreme PRO Portable SSD - SDSSDE81 | SanDisk Extreme Portable SSD - SDSSDE61 | SanDisk Extreme PRO Portable SSD - SDSSDE80 | SanDisk Extreme Portable SSD - SDSSDE60 (500GB 1TB 2TB 4TB). Interior size: 4.75 x 2.4 x 1.05 inches. | 【EFFECTIVE PROTECTION】Constructed of semi-waterproof polyester fabric and EVA material which makes the shell serviceable and easy to clean, effectually protects your SanDisk Extreme PRO SSD against damages from splashing and dropping. Soft lycra and shock absorption bubble lining interior provide you with better cushion that keeps your devices free from daily bumps dents and scratches! | 【EXQUISITE DESIGNING】 Handy and compact case comes with a comfortable wrist strap for easy carrying on wherever you go. Smooth and durable dual metal zippers make it easy to open and close. Elaborate and convenient design makes it ideal and safe to carry for travelling! | 【ENOUGH STORAGE】 Featuring a separate built-in mesh pocket to store your USB cable, charger and other practical accessories, also boasts extra plastic slots to place SD cards memory cards or other smaller but essential widgets, all of devices will be placed snugly and securely! | 【LACDO GREAT COMPANION】A delicate gift for your beloved family and friends. A portable and comfy hard drive case which perfect for work and daily life, business trips, traveling or home storage. A reliable companion being always with you. Lacdo after-sales team provides you with 12 months free return and exchange service.

Two Hook and Loop Fastener openings, very labor-saving and easy to attach and remove. | Very light, no extra weight, but thick and long enough to cushion a large area of the shoulder and reduce gravity, so that your shoulder feel comfortable. | Outside Material is Nylon and inside is EPE cotton, so it has good breathability. | Suitable for 3.8cm-5 cm shoulder strap, widely used to laptop case shoulder strap, camera bag pad, guitar strap, cropper, guitar strap, safety belt and more.

HD/PTZ/Wifi Security Camera: The 1080P Wi-Fi indoor camera allows you to control the viewing angle through the app, providing remote access to monitor children, the elderly, and pets such as dogs and cats anytime, anywhere using your iPhone, Android phone, or iPad. It uses 2.4G Wi-Fi for stable transmission (does not support 5G) and has a reliable power source for 24/7 recording, eliminating worries about battery depletion or replacement. | Motion Detection: With the PTZ function, the monitoring range covers 355° horizontally and 120° vertically, ensuring comprehensive coverage with no blind spots in every corner. You can rest assured that your family and children are safe. When your family members, pets, or strangers enter the detection area, it will send alert notifications to your phone. The PTZ will automatically adjust the monitoring angle until they leave the detection area, and then return to the default position. | Intelligent HD Camera: The surveillance camera offers two monitoring modes, indoor and outdoor, to adapt to different lighting conditions in monitoring environments. It provides clearer color images when the lighting is bright and switches to black and white images at night. The built-in floodlight assists infrared illumination, enabling clearer photos to be captured during nighttime. | Real-time Monitoring: The camera supports TF (Micro SD) card and cloud storage for video recording, although cloud storage requires a fee. If you don't have a storage card at home, it is recommended to purchase a storage card with an SD card option for video storage and playback. | Easy Installation: Quick and easy installation by scanning the QR code. We provide detailed videos that allow you to complete the installation in just four steps. Compatible with both IOS and Android systems. If you have any questions, please email us, and we will reply within 24 hours.

【1】Made of CNC manufacture this step-up ring with and then apply a matte black electroplated finish,which withstands corrosion and other abrasive elements often encountered in outdoor photography. | 【2】Filters Ring,can be mounted to the front of the lens to achieve different diameter share the same lens diameter filter,lens hood,additional lens and other accessories.The purpose is to increase the diameter of the lens.Change the filter or adapter or lens or other size from 43mm to 72mm. | 【3】Compatiable For:To the side of the lens:43mm (All Brands Ø43mm),To the side of the filter thread:72mm (All Brands Ø72mm).Your lens thread size will be printed underneath your lens cap or written somewhere on the lens barrel.Make sure you order the correct size otherwise it will not fit your lens. | 【4】The first number of an adapter ring is always the lens thread size,the second number is the filter size of the accessory.If the first number is bigger,it's a step-down ring What is a step up ring?Step up rings,also known as adaptor rings,allow you to use filters and accessories that are not the same size as your cameras lens. | 【Note】Why Choose BeiZmei Brand？professional camera accessory manufacturer.Dedicated to provide products in high quality & good price.Made of metal sealing ring,much tighter.Laser fonts, much durable.Meet Environmental Standards of RoHS.

【1】Made of CNC manufacture this step-up ring with and then apply a matte black electroplated finish,which withstands corrosion and other abrasive elements often encountered in outdoor photography. | 【2】Filters Ring,can be mounted to the front of the lens to achieve different diameter share the same lens diameter filter,lens hood,additional lens and other accessories.The purpose is to increase the diameter of the lens.Change the filter or adapter or lens or other size from 72mm to 77mm. | 【3】Compatiable For:To the side of the lens:72mm (All Brands Ø72mm),To the side of the filter thread:77mm (All Brands Ø77mm).Your lens thread size will be printed underneath your lens cap or written somewhere on the lens barrel.Make sure you order the correct size otherwise it will not fit your lens. | 【4】The first number of an adapter ring is always the lens thread size,the second number is the filter size of the accessory.If the first number is bigger,it's a step-down ring What is a step up ring?Step up rings,also known as adaptor rings,allow you to use filters and accessories that are not the same size as your cameras lens. | 【Note】Why Choose BeiZmei Brand？professional camera accessory manufacturer.Dedicated to provide products in high quality & good price.Made of metal sealing ring,much tighter.Laser fonts, much durable.Meet Environmental Standards of RoHS.

【1】Made of CNC manufacture this step-up ring with and then apply a matte black electroplated finish,which withstands corrosion and other abrasive elements often encountered in outdoor photography. | 【2】Filters Ring,can be mounted to the front of the lens to achieve different diameter share the same lens diameter filter,lens hood,additional lens and other accessories.The purpose is to increase the diameter of the lens.Change the filter or adapter or lens or other size from 58mm to 77mm. | 【3】Compatiable For:To the side of the lens:58mm (All Brands Ø58mm),To the side of the filter thread:77mm (All Brands Ø77mm).Your lens thread size will be printed underneath your lens cap or written somewhere on the lens barrel.Make sure you order the correct size otherwise it will not fit your lens. | 【4】The first number of an adapter ring is always the lens thread size,the second number is the filter size of the accessory.If the first number is bigger,it's a step-down ring What is a step up ring?Step up rings,also known as adaptor rings,allow you to use filters and accessories that are not the same size as your cameras lens. | 【Note】Why Choose BeiZmei Brand？professional camera accessory manufacturer.Dedicated to provide products in high quality & good price.Made of metal sealing ring,much tighter.Laser fonts, much durable.Meet Environmental Standards of RoHS.

FUNCTION:UV filter can reduce ultraviolet light and protect your lens from dust and scratch. | SUPER SLIM: GREEN.L UV filter frame made of tough aviation aluminum,0.09 inch deep (not inc rear threads) which is great for the wide angle lens. | HIGH LIGHT TRANSMITTANCE:This UV filter made of high quality optical glass,double side multi-layer coating,transmittance up to 99%,clear and accurate ,no distortion or discoloration. | FILTER HARDNESS UP TO 9HD:GREEN.L UV filter can effectively prevent scratch,dust, oil stains, fingerprints and direct contact with the lens. | EASY TO USE: Any lens with 77mm thread it will work.Please verify your camera's lens thread size.For example: Ø77mm.

Part Number: JW045A | Alternate Part Number: AP-220-MNT-C2 | Manufactured By: RoutersWholesale | Lifetime Replacement Warranty! | AP-110, 214, 215, 224, 225, 228, 314, 315, 324, 325, 334, 335

【6 Feet VGA Cable】VGA male to VGA male cable connects a VGA (Video Graphic Array) equipped computer to a monitor or projector with 15-pin VGA port (also known as RGB, DB-15, DE-15, HD-15, HDB-15 or D-sub 15) for video editing, gaming, or video projection. | 【1080P High Resolution】This VGA cable supports video resolutions at 800x600 (SVGA), 1024x768 (XGA), 1600x1200 (UXGA), 1080p (Full HD), and up for high resolution LCD and LED monitors. | 【Steady and Durable】The VGA cord engineered with molded strain relief connectors for durability, grip treads for easy plugging and unplugging, and finger-tightened screws for a secure connection. | 【Broad Compatible】Compatible with any devices with a VGA Interface: LED/LCD, Monitor, Projector, PC, Laptop, TV, PSP, TV Box. | 【Lifetime Warranty】Originated from confidence in product quality, we provide unconditional lifetime warranty ensures long-time satisfaction of your purchase and provide 24-hour service online.

【DIY DB9 cable 】Using 9pin male and female connectors, you can make DB9 cable or USB to RS232 / RS485 cable by yourself. The cable length and wiring sequence can be customized | 【Scope of application】D-sub9pin does not need to weld serial port connector, which is suitable for RS232 / RS485 / RS422 serial adapter COM port ，Such as computer and tax control machine, digital camera,PLC, PDA, MODEM, set-top box, barcode machine | 【How do you use it】For 9pin serial port solderless connector, turn the screw anticlockwise to insert the wire without insulation into the terminal hole, and then tighten the screw clockwise to check whether the 9C cable is in good contact | 【How to connect rs232/485】RS232 serial port adapter signal is connected to 3 pins: 2-rx, 3-tx, 5-gnd, RS485 signal is usually connected to only 2 pins, 1-A, 2-B, or 3-A, 8-b, but some device pins are defined as others。 | 【What you get 】2PCS DB9 Female gold plat PIN Solderless Connectors with case，1PCS Screwdrivers ，4PCS 4#5+7 Serial port Nut ，4PCS 4#62mm Serial port long bolt ，4PCS 3*8mm Screws ，2PCS Wire pressing plate ，6PCS Wire cover

📷【Comfortable-Material】This camera and binocular strap made from high quality cotton canvas webbing,comfortable neck pad with super soft fiber surface cloth against your skin. The wide, Comfortable cotton strap will sit perfectly without slipping. Plus, Even when you’re doing an all-day photo shoot with a heavy camera and lenses! It will also make your neck and shoulders more comfortable. | 📷【 Adjustable Length 】The length of the binocular and camera strap webbing part is 29”/73cm, The length of each side nylon webbing is 13”/33cm. The width of the camera strap is 2”/5cm. Adjustable Length : Minimum 29” Long / Max Size: 55” Long. Can be adjusted as needed. | 📷【 Strong Compatibility 】 This Camera strap fits for various DSLR/SLR brands like Nikon Canon Sony Olympus Samsung Pentax. Our camera strap is designed to provide you with the same performance, Reliability and comfort with any camera you can think of. | 📷【Versatile For Replacement】This shoulder strap is while it can be used for other equipments like binoculars, Drone Remote Controller and so on. | 📷【Great Design】The personalized and eye-pleasing design will highlight your camera,binocular and your travel,Long and wide camera binocular strap for convenient carrying of your camera and binocular, Camera binocular strap with Non-slip surface helps you to protect accidental slip of your camera and binocular.

BFYTN security wall mount is compatible with the Arlo Pro, Arlo Pro 2, Arlo Pro 3, Arlo Ultra, Arlo HD, Arlo Go, and Arlo Light as well as other compatible camera models including Replacment mount for Ring Stick Up Cam/Indoor/Battery Cam, eufyCam E/2C, Camera with 1/4 Screw Head | ✔STURDY AND DURABLE¡êomade of high quality aluminum alloy, Rust-resistant ,oxidation resistant, Not afraid of rain or sun. perfect for indoor or outdoor use. | ✔EASY TO INSTALL:Extends 5 in from the mounting surface, come with all the fittings, install it without any difficulties | ✔ANY ANGLE ADJUSTABLE :with 360-degree swivel & 90-degree tilt. the camera mount can be installed on the wall and ceiling with the appropriate angle | ✔VALUE PACK: 2x Camera Wall Mount, 6x Screws, 6x Wall Plugs

Connects remote trigger to camera, the perfect match to flash trigger and the camera remote control equipment. | Made of high quality materials and processed by exquisite moulds. | Connectors are 3.5mm (straight)/ 2.5mm (bended) plug to RM VPR1 S2 connection. | Stretchable spiral coiled cord, easy to use and carry. | Compatible for Sony RX1/RX10/RX100/A7S/A7R/A7/A7II/A7III/A9/A58/77M2/99M2/A3500/A5000/A5100/A6000/A6300/A6500.

[Perfect Fit] Camera cases special design for kodak camera limiting size of 5.0 in*3.6 in* 1.7 in, which can meet your various kinds of needs.(case only) | [Smart Protection] kodak camera case made of premium hard EVA and durable velvet materials,offers double protection against scratches, dents, bumps, and drops. | [Easy to Carrying] kodak printomatic case comes with hand strap to carry easily . This case is lightweight and compact to fit in your bag or luggage. | [Thoughtful Design] 360° Zip is convenient for you to put your camera in and out the case and specifically designed mesh pocket perfectly for cable and other small accessories. | [Perfect Gift] Stylish and elegant design which make it outstanding . Small camera bag is the best birthday, Christmas or holidays gift for your family or friends.

★ Magnetic Quick Release Mount - With this powerful magnetic quick release mount, you can quickly switch between multiple shooting scenes in a second without complicated mounting. | ★ Double Safety Protection - Magnetic quick release base mount includes magnetic and rotating locking design, the magnet attracts and then rotates to lock the bracket, so you don't have to worry about dropping or falling off the device during use. | ★ High Quality - The tripod mount adapter is made of premium ABS, sturdy and durable. help quick release from tripod/selfie stick/helmet mount/shoulder strap/bike mount etc | ★ Support Anisotropic Shooting - The two-legged magnetic adapter supports anisotropic shooting, providing more shooting angles for fixed shooting scenes. | ★ Lightweight & Portable - The weight of the 1/4 inch 20 magnetic adapter is only about 33g and has a diameter of about 30mm, so it is light and easy to use with a variety of accessories. Suitable for a variety of scenes, in skiing, bungee jumping and other more intense scenes before shooting, please ensure that the rotation is locked before use.

6.25% Transmission DN filter;ND16 filter transmits only 6.25% of the incoming light; help reduce radiation; reduce deformation between light and dark areas at the edge of the moon; Help you watch the moon comfortably;Let you achieve a sharper image directly | Suitable for watching three-quarter moon ;The 1.25" Neutral Density Moon filter can reduce the amount of light reaching the film without affecting the color; and reduces glare so you can see more lunar detail and surface features with your telescope | Help protect dark-adapted vision;When observing the three-quarter moon; most of the moon's circular surface is bright; At this time; direct observation is likely to damage the eyes; ND16 filter transmits only 6.25% of the incoming light;Can protect your eyes | Durable Material; The included filters are made of HD optical glass; can guarantee a good light transmittance; Aluminum alloy frame sealing ring for better tightness and avoiding fall or loose | Applicable standard 1.25 inch; Metal filter cell threads directly into the 1.25 inch barrel of your telescope eyepiece; Useful for different caliber astronomical telescopes through which the light of the Moon can be extremely overwhelming

Carrying Case External dimension: 7.5'' (L) x 4" (W) x1.6" (H) | Shockproof EVA Pouch: storage space for cell phone, power bank, battery case, adapter, charger, USB cable etc. | Premium Material: High-quality EVA material for scratch protection and shockproof, smooth coating for comfortable grip | Universal Pouch for ALL of your small stuffs: Built-in Soft Mesh Pocket to hold USB Cable and Memory Cards | What You Get: 1 X Universal Shockproof Electronics Carrying Case. UUGOO provide 100% Satisfied Customer Service, 6 months worry-free new replacement. Buy it NOW!

【1】Made of CNC manufacture this step-up ring with and then apply a matte black electroplated finish,which withstands corrosion and other abrasive elements often encountered in outdoor photography. | 【2】Filters Ring,can be mounted to the front of the lens to achieve different diameter share the same lens diameter filter,lens hood,additional lens and other accessories.The purpose is to increase the diameter of the lens.Change the filter or adapter or lens or other size from 46mm to 67mm. | 【3】Compatiable For:To the side of the lens:46mm (All Brands Ø46mm),To the side of the filter thread:67mm (All Brands Ø67mm).Your lens thread size will be printed underneath your lens cap or written somewhere on the lens barrel.Make sure you order the correct size otherwise it will not fit your lens. | 【4】The first number of an adapter ring is always the lens thread size,the second number is the filter size of the accessory.If the first number is bigger,it's a step-down ring What is a step up ring?Step up rings,also known as adaptor rings,allow you to use filters and accessories that are not the same size as your cameras lens. | 【Note】Why Choose BeiZmei Brand？professional camera accessory manufacturer.Dedicated to provide products in high quality & good price.Made of metal sealing ring,much tighter.Laser fonts, much durable.Meet Environmental Standards of RoHS.

【1】Made of CNC manufacture this step-up ring with and then apply a matte black electroplated finish,which withstands corrosion and other abrasive elements often encountered in outdoor photography. | 【2】Filters Ring,can be mounted to the front of the lens to achieve different diameter share the same lens diameter filter,lens hood,additional lens and other accessories.The purpose is to increase the diameter of the lens.Change the filter or adapter or lens or other size from 52mm to 82mm. | 【3】Compatiable For:To the side of the lens:52mm (All Brands Ø52mm),To the side of the filter thread:82mm (All Brands Ø82mm).Your lens thread size will be printed underneath your lens cap or written somewhere on the lens barrel.Make sure you order the correct size otherwise it will not fit your lens. | 【4】The first number of an adapter ring is always the lens thread size,the second number is the filter size of the accessory.If the first number is bigger,it's a step-down ring What is a step up ring?Step up rings,also known as adaptor rings,allow you to use filters and accessories that are not the same size as your cameras lens. | 【Note】Why Choose BeiZmei Brand？professional camera accessory manufacturer.Dedicated to provide products in high quality & good price.Made of metal sealing ring,much tighter.Laser fonts, much durable.Meet Environmental Standards of RoHS.

SFF-8643 to 4x SATA Cable: Internal mini SAS (Serial Attached SCSI) to 4x 7Pin SATA cable, 1-meters (3.3 ft) | High-speed Transmission: Point-to-point SCSI data transfer speeds up to 6 Gbit/s, uses less PCB real estate and allows higher port density for internal hosts and devices. | SFF-8643 Connector: Internal HD Mini SAS connector on the host for connecting motherboard or RAID Controller. (Note: Before you buy this cable , please make sure the Mini SAS (SFF-8643) on your motherboard or RAID Controller. If the Mini SAS (SFF-8643) on your backplane, this cable will not work with them.) | SATA Connector: 4x 7Pin SATA is the target, connect to the hard drives with SATA ports | Widely applicable for enterprise storage, high-performance computing, networking, data centers, workstations, etc.