[PS5 Expansion Slot Cover]- M.2 SSD dust cover is specially designed for installing PlayStation 5, multiple ventilation holes for heat dissipation to improve the performance of M.2 SSD | [PVC Dust Filter]-PVC dust filter greatly reduces the dust accumulation in the PS5 M.2 SSD expansion slot, protects the inside of the machine clean, and matches a small brush, which can be used as a convenient cleaning | [New Air Vent Design] - With a new air vent design, it increases the heat dissipation area and absorbs the heat generated by the M.2 SSD. Cool down with the PS5 internal fan. | [Fit All Ps5 M.2 Ssd Heatsinks] - The heatsink cover is combined with M.2 Ssd with integrated heatsink to achieve cooling performance and prevent overheating. | [Package Contents]- PS5 M.2 Radiator Cover, Screwdriver, Cleaning Brush, User Manual

Accurately, specifically developed and compatible with FiiO X3 Mark III | Made of scratch-resistant, highly transparent PET material and laser-cut on state-of-the-art machines | This transparent Screen Protector can be applied easily and without bubbles, and can be removed or repositioned at any time | No slipping - once attached, the glue-free Protective Film no longer moves - optimal edge adhesion guaranteed | Optimized for use on touch displays - unadulterated display of the screen contents and no impairment of the usability with the Protector Film *** Made in Germany

【Bi-directional HDMI Splitter Switch】-The 2X1/1x2 HDMI to HDMI Splitter Switcher connects two HDMI sources to one HDMI display under HDMI Switcher (2 in 1 out) mode or selects the display device for the connected HDMI source under HDMI Splitter (1 in 2 out) mode(⚠️notice: the 2 outputs CANNOT work simultaneously). | 【High Resolutions】-This 2-in-1 two-way HDMI 2-port Switcher Splitter supports resolutions up to 4K@60Hz/30Hz, 2K@144Hz/120Hz/75Hz/60Hz/30Hz, 1080P@240Hz/144Hz/120Hz /75Hz/60Hz/30Hz, 3D, etc. when used with ATC qualified HDMI 2.0 cable. | 【Long Distance Transmission with 16ft】-The 4k HDMI 2 in1 adapter supports high bandwidth data transmission up to 3.4 Gbps, and the in&out transmission distance reaches up to 5m/16ft in total without delay when using 26AWG ATC qualified HDMI 2.0 cable. | 【Broad Compatibility】-HDCP2.2 supported, HDMI 2.0 compliant, backward compatible with HDMI 1.4&1.3. This HDMI splitter 1 input 2 output & HDMI Switcher 2 in 1 out works with most devices with standard HDMI interface, such as Fire TV Stick, Nintendo Switch, PS4/3, Laptop, Blu-ray DVD, HDTV, Projector, Monitor, and so on. | 【Slim yet Reliable】-Slim and compact design, taking up minimal space and saving valuable room, while not compromising on performance: featuring a metal casing, gold-plated interfaces, and pure hardware design offers excellent heat dissipation, corrosion resistance, and wear resistance, which ensures this HDMI port switch box both a long lifespan and stable, secure signal transmission with no delay, flicker or loss of image or audio quality. | 【User-friendly】-〖Plug & Play〗Hot swap&plug supported, unplugging while using without reducing life; 〖Easy to use〗No additional power supply/software/drivers are needed;〖Portable〗The unique compact design and slim metal body save your space in a large part;〖One-button Switch〗just press the button on the 4k HDMI 2.0 splitter switch box to choose the video source or display needed. Meanwhile, we provide〖24-Hour Customer Service〗&〖Lifetime Technic Support〗.

This brand new Macro Extension Tube Set for your film & Digital SLR includes 3 extension tubes - 9mm, 16mm, 30mm adapters. | Use this set will not downgrade the optical quality of your lens. | Sharpness and Saturation can be still maintained. But they are not meter-coupled. They do not preserve the automatic diaphragm. | It should be used with manual lenses with their own aperture dial. When using the extension ring with a DSLR / SLR, the camera should be set in the 'M' mode. | There is no electronic connection between the body and the lens. Automatic lenses can be used with their widest open aperture only.

★ 【ATYFUER - Dash Cam charger cable】garmin car charger，for garmin Dash Cam ，garmin GPS Navigator， MP3 Player， Digital Camera Recharge ，ATYFUER - Dash Cam cable have 2 USB ports and one built-in Mini usb cable(11.5FT). | ★ 【Three-in-one Dash Cam Charger】garmin Car GPS navigator charger and 2 USB ports (for mobile phones and other devices Recharge) and a built-in 5V / 1.5A Mini USB （11.5FT）garmin dash cam Charger cable (for dash cam or car GPS navigator Recharge). | ★ 【 Mini USB power cord】 Built-in 11.5-foot-long Right corner high-speed Mini USB Charger cable to ensure that you can always quickly connect your garmin GPS navigators and dash cam Recharge. | ★【2 USB Ports Dash Cam Charging Cable】2 USB smart ports, 1- 2.5A fast charging port, and 1- 1A charging port. Can charge mobile phones MP3 Player Digital Camera and other devices while traveling.★★★Be sure to check the length of the power cord 11.5ft before purchasing, and check the charging port: Mini USB port，All delivery 90 degree right corner joint. | ★ 【Dash Cam Charger Cable Wide compatibility】 This Mini USB Car Dash Cam Dharger cable is suitable for most Dash Cam，GPS Navigator (Voltage between 12V-24V cars and trucks). Our Dash Cam charger cable is suitable for almost all mini USB devices, such as ：Dash Cam, Rearview mirror driving recorders, GPS navigators ,MP3 Player,Digital Camera,Game console and radar detectors.★Note :All delivery 90 degree right corner joint.

Package includes: 12pcs 125KHz T5577 RFID CARD. Standard 125Khz ID Card,Support ID125khz HID125khz card duplication | The size same as a credit card, CR80 30 mil. The chip type: T5577.Thickness: 1.8mm. material: PVC | Applications: Hotel key card, Access control systems, Time attendance system, packing card | T5577 Chip: It doesn't have pre-programmed id number,so need to write the id on it before you read | Blank white card, printable by sublimation printer, but can't support inkjet printer

This is a version 3.0 SD2VITA PSVSD Micro SD Adapter, supports any micro SD card as long as you format it. | Version 3.0, it support memory card up to 512GB with faster loading speed. | Perfectly fit for PSV 1000/2000. | Easy to install. High precision moulding. | The adapter will only work with PS vita's running 3.60 firmware or higher which can run compatible with Henkaku.

Case designed for 6 inch Amazon Kindle Paperwhite (7th/6th/5th Gen - 2015/2013/2012 Released - Model: DP75SDI or EY21) . Will not fit other tablet models. Please check the Model number on the back of your Kindle before placing an order | Made of high-end PU leather and Plastic, it is durable and not easy to fade. The classic style reveals a strong texture | Upgraded smart Sleep/Wake Function . Opens and closes just like a book to wake your Kindle or put it to sleep | Thin &Lightweight design allows for hours of comfortable holding & reading | Precise cutouts allow full access to speakers, ports ,and camera.

The USB charging pass-through door with lid is specially designed for GoPro HERO11/HERO10/HERO9 Black, ensuring that the camera can be charged during long-term shooting. | While opening a hole at the interface to facilitate plugging and unplugging of the data cable, a closable warehouse door is added. | In daily storage and use, it can effectively prevent the intrusion of foreign objects from causing damage to the data interface. | Although this side cover can be closed, there is a slight gap in the closed part and cannot be waterproof. Do not use it for wading. | When using the data interface, there is no need to open the entire side cover, just open the closable door, and the inside of the body and the battery are not exposed.

Kastar 2 pack high capacity batteries. Use high quality cells for longer battery life with no memory effect. | New smart LCD charge design, easy to carry. Input: 5V 2A; Output: 4.2V/8.4V 600mA. | Intelligent LCD charger displays charging status and battery capacity. | Can be powered by USB Wall & Auto Charger or a Computer, comes with a Micro USB cable. | Compatible Model List: Nikon EN-EL19, MH-66, Nikon Coolpix A100, S32, S100, S2600, S2700, S2750, S2800, S3100, S3300, S3400, S3500, S3600, S3700, S4100, S4300, S4400, S5200, S5300, S6600, S6700, S6800, S6900, S7000 Cameras and Sony NP-BJ1, NPBJ1, Sony DSC-RX0 Ultra-Compact Shockproof Waterproof Digital Camera.

【Parameter】- Outer Frame Diameter: 95mm/3 inches; Inner Mesh Diameter: 72mm/2.83 inches; Diagonal Center Hole Distance: 84mm/3.3 inches; | 【Superior Material】- Inner Mesh: Cold Rolled Steel; Outer Frame: ABS Plastic; | 【Easy to Install】- This mesh speaker grill has four screw holes, makes it a ready-to-go audio accessory; | 【Bundle】- Distribute screws, make you more convenient installation; | 【Wide Range Use】- Suitable for bookshelf speakers, subwoofers, tweeter, computer speakers, in-ceiling or in-wall speakers.

Universal 3 Cold Shoe Mount - Works as an extension bar mount to attach 3 devices such as microphone,flash,led lights at the same time.Besides,Come with a 1/4" to shoe mount adapter, which allows this bracket to mount directly on DSLR cameras or any devices with 1/4 screw holes. | Cold Shoe Adapter Attach Base - 1/4 screw hole with hot shoe adapter design in the bottom for your DSLR camera,smart phone holder,camera tripod,phone tripod and any camera rigs with 1/4” screw hole or hot shoe bracket. | Rotatable Design - Three hot shoe mounts can be swiveled 180° for your better shooting angel；With a security lock design prevent devices from loosening and falling off; Perfect for Vlogging. | Lightweight & Portable - Weight only 1.76 oz with length 5.6 inches and Up to 3 devices can be installed at the same time, cause no extra burden even you use handheld tripod for video vlogging, recording, live streaming. | Sturdy & Durable - Made of Aluminum Alloy + Plastic. Precise CNC machining and black anodized treatment for higher durability. Note:The spacing of each cold shoe interface is 1.7", which is suitable for installing three general devices at the same time, not suitable for large devices.To prevent swing away,it is suitable for still shooting when you connect heavy devices.

Compatibility: This camera case is compatible with Fujifilm Instax Mini 11 / 9 / 8 / 9+ Instant Film Camera. | Material: High quality PU Leather and soft microfiber inner design provides great protection for your camera against dust, scratches and damages. | Button Snap Closure Design: Removable top cover enables you to take photos without taking the camera out from the bag. | There is also a dedicated window to see the number of photos remaining. The removable shoulder strap can be adjusted freely from 27 inches to 56 inches. | Package included: Case bag with adjustable strap only (Camera is NOT included)

Model: PLA09215B12H | Voltage: DC 12V | Power Connector: 4 Pin Female Header | Fan Dimension (LxWxH): approx. 88mm (+/-2mm) | Mounting holes distance: approx. 42mm x 42mm x 42mm(Center to Center)

SFP+ to SFP+ DAC Twinax cable assembly, Passive, 1-meter, AWG30. DAC Length= with 2 SFP+ connectors. | Widely compatible with Cisco,Meraki, Ubiquiti, Netgear, D-Link, TP-Link, QNAP, Supermicro, Mikrotik, Zyxel, Linksys, Broadcom, NetScout, ZTE etc. | SFP+ cable can connect various devices, such as Fiber Switch, Storage, Router, Server,Firewall, NIC, Media Converter, Date Center and Other fiber optic equipments with SFP+ ports etc. | 10G SFP+ DAC cable is a good alternative to fiber over short distances, with low-cost, low power consumption and low latency. | 5-Year Warranty is offered, HiFiber provides 24/7 Customer Service.

600W double lightning surge protection and 15KV static protection protects your value devices against high voltage spikes created by either by static electricity or by surges in the supply voltage | RS-232 to RS-485 serial converter with TX and RX indicators enables you to easily know the status of sending or receiving data respectively | Passive bi-directional RS232 to RS485 converter supports reliable signal transmission over long distance: up to 4000ft over RS-485 link at a high speed | Mini RS 232 to 485 adapter Supports 2 wire half duplex communication, point to point and point to multi-point network (up to 32 RS-485 devices) | The baud rate will be detected and adjusted automatically, up to 115200 bps; It’s port powered from RS-232 signal, no external power required

Works for TI 84 Plus, TI 84 Plus C Silver Edition, TI 89 Titanium and TI Nspire CX&CAS | TRANSFER FILES FROM CALCULATOR TO MAC OR PC | Extends and simplifies the functionality of your TI calculator | Ideal for software downloads and backups | Manufactured by Guerrilla- the #1 brand of calculator accessories.

3ft PL2303 USB to TTL serial adapter 3V3 (with 4 pin 0.1” pitch female header socket) connects devices with 3.3 V logic level UART signals interface to a laptop via USB port | A genuine PL2303TA chip module is housed in USB 2.0 type A male terminal for wider compatibility and supports reliable data transfer rates | 3 feet USB to TTL serial cable 3.3V (4 way output flying leads ) provides access to UART (transmit) Tx, (receive) Rx, VCC (5V) and GND | Prolific chipset on the PCB board has configurable internal EEPROM and UART signals can be individually inverted by configuring the EEPROM | 4 pin TTL to USB Converter cord is compatible with Windows 10, 8, 8.1, 7 (32, 64-bit), 2008/XP/Vista/CE; ideal USB 2.0 debug cord for Vendor ID re-write, router, GPS, set top box, transmitter, flash firmware on hard drive, etc.

Can Connect the Stereo 3.5mm Audio cell phone Tablet. | For Audio Aux output. | Applicable models: | Series: A6L / Q5 / Q7 / A8 / S5 / A5 / A4L / A3 / A1 (original car with AMI interface). | Series: GTI high 6 CC Magotan, etc. (MDI-BOX interface original car with)

【Specifically Designed】This L-shaped power cable is specifically designed for WYZE Cam Pan v3 cameras / Blink Outdoor(3rd Gen) cameras, serving as an ideal replacement for the original short cable (NOTE: Not compatible with any other cameras, and WYZE Cam not included) | 【Quality Design】Gold plated USB connector pins for better connectivity, meets AWG(American Wire Gauge) standard. We offer cables in a variety of lengths and package quantities, including 10 ft, 20 ft, and 26 ft, in 1-packs and 2-packs for you to choose from. Please check at product description | 【Extra Long&Thin】Our flat cable is designed to be both long and slim, making it easy to thread through narrow gap like doors and windows, and extra adhesive clips can be used in smooth places that are not suitable for nails | 【Better Waterproof】Our micro usb connecter is special design for better waterproof performance | 【Worry-Free Service】We are devoted in developing high quality home security camera system accessories,If you have any questions,please contact us

Ball Head Rotation - 360° Rotation & 40° Tilt Supports devices in Both mode landscape & portrail. 360° ball joint allows you to adjust the tablet in any angle and position | Best Design Mount - an adjustable loading button in upper, press to open the clip upward. double spring-locked system in bottom, provide the strong clamping force, will secure your device steadily in place allows you fast install and remove your tablet | FIT for All Tablet - this iPad tripod mount suit for 3.5 - 13.5in tablet and smartphone with thick case. the maximum opening of the tablet clamp holer is 23.5CM (9.25in), and the size of the claw is 2 (0.8in), you do not need to remove your thick tablet case. fit for iPad Pro 12.9" 11" 10.5" 9.7", iPad Mini , iPad Air and Samsung tab, Surface Pro, Nexus, Kindle Fire, Amazon Fire, iPhone 11 XS Max XR X 8+ 8 7+ 7, Galaxy S20 S10 + S10e A9 A8 etc | Well Made - iPad tripod adapter Made of ABS, the solid structure, thick spine and ball joint supporting pivot at the back centre make sure your iPad be held very steadily, not wobble.the four claws use high density sponge pad with more friction, They can tightly hold your thin tablet and protect it from scratch | Allows to access all ports without blocking magnetic connector, mic and power port

Audio switch for 3.5mm (1/8") audio jacks. It can be used in two directions: 2 IN 1 OUT & 1 IN 2 OUT | 2 IN 1 OUT: Connect with two audio sources (example: computer and TV), then connect with one output (example: speaker). The A/B switch pot is for selecting one of the audio sources to be routed to the output. | 1 IN 2 OUT: Connect with one audio source (example: mp3), then connect with two outputs (example: headphones and speakers). The A/B switch pot is for selecting one of the outputs (2 outputs are not simultaneous). | Microphone headset also compatible: This box works with any four-segment (TRRS) audio jacks, means that if you plug in headphones with a built-in microphone, the microphone will work through the switch. TRS also Compatible. | Built in mini size aluminum chassis, looks nice and durable. Passive switch that does not need power supply.

IMPORTANT NOTE: This is a replacement part for a VESA adapter bracket that comes with the Intel NUC Mini Computer. Please check to see if you already own a VESA mounting bracket before purchasing. | COMPATIBLE MODELS: NUC8i7BEH NUC8i5BEH NUC8i3BEH NUC8i5BEK NUC8i3BEK NUC8i3CYSM NUC7i7DNHE NUC7i7DNKE NUC7i5DNHE NUC7i5DNKE NUC7i3DNHE NUC7i3DNKE NUC5i5MYHE NUC5i3MYHE NUC7i7BNH NUC7i5BNH NUC7i5BNK NUC7i3BNH NUC7i3BNK NUC5i7RYH NUC5i5RYH NUC5i5RYK NUC5i3RYHS NUC5i3RYK NUC7PJYH NUC7CJYH NUC7CJYSAL NUC6CAYH NUC6CAYS NUC7i7BNHX1 NUC7i5BNHX1 NUC7i3BNHX1 | VESA MOUNTING KIT COMPATIBLE WITH INTEL NUC: Use this mounting bracket to mount your Intel NUC mini computer on the back of a computer monitor (Note: Does not fit the Hades Canyon NUC). | Available spacing parameters: Hangable monitor back 75 * 75MM, 100 * 100MM Hanging hole spacing: 85MM | for Intel Nuc 4th/Intel Nuc 5th/Intel Nuc 6th/Intel Nuc 7th/Intel Nuc 8th/Intel Nuc 10th/Intel Nuc 11th

[CPL Filter] : This Polarizing filter diminishes ghosting effect from reflected light,increases the contrast of blue sky and white clouds in landscape photography,improves overall colour saturation;Reduces or eliminates glare,effectively helps remove unwanted reflections from surfaces such as water and glass in addition to light reflecting off moisture and pollution in the atmosphere.It plays an irreplaceable role in photo post processing. | [Ultra Violet Filter and FLD Filter] : UV filter is to reduce ultraviolet light and protect your beloved lens from dust,scratch and collision,perfect for outdoor photography.FLD filter is to reduce the greenish tone under fluorescent lighting,giving natural light colors. | [Note] : This universal filter set fits all Same caliber lens.Please verify your camera's lens thread size before ordering. Your camera's lens thread size will be marked somewhere on the lens barrel or printed underneath your lens cap. | [Package] :Includes 40.5mm UV filter x 1,1 x 40.5mm CPL filter,1 x 40.5mm FLD Filter,1 x 40.5mm centre pinch lens cap ,1 x Microfiber Lens Cleaning Cloth. | [Warranty] : We offer one year warranty and life-time after-sales service,if you meet any problem,please feel free to contact us.

Attention! This is 24V Passive PoE Adapter, only works for the 24V PoE devices, NOT for 48V(802.3af) PoE devices | Power over Ethernet injector with 24 volt 24 watt 1 Amp power supply - Power is on all the time - no Autonegotiation | Remotely power 10/100Mbps 24V PoE enabled Equipment Through CAT5/5e/6/7 Ethernet Cable up to 328ft. | Support 24V PoE enabled IP Phones, Access Points and IP Cameras, such as Ubiquiti, Unifi, Mikrotik, Tranzeo, Unifi, Aircam, etc | NOT support 802.3af (48v) PoE devices, if your devices state 802.3af PoE, please check our 48v PoE injector ASIN: B077QGTDLB

Package Includes: 2pcs of RF RG316 Coaxial pigtail Low Loss cable | Each cable length 4 inches (10cm) | SMA Female antenna connector to MMCX Male Low Loss cable adapter right angle (90 degree angle) | Cable type: Low Loss RG316 coaxial | Impedance: 50 Ohm, Metall: copper

Dimensions:Length 7 cm,width 5 cm,thickness 2.5 cm | Frequency: not fixed position determined by debugging. | Power: Speakers below 400W are available. | Impedance:suitable for 2-16ohms. | Material: The inductor is wound by oxygen-free copper,and the diameter ofthe pure copperthickwire is about 08 This shop has been verified. Super large capacity capacitor,reasonable design, exquisite appearance,Sound quality realizes full self-control.

The adapter can covert the NGFF M-key SSD to the 2014 Macbook Mini A1347 MEGEN2 MEGEM2 MEGEQ2 SSD. | Compatibility With: 2014 Macbook Mini A1347 MEGEN2 MEGEM2 MEGEQ2 | Note: The Nvme SSD only work for Mac OS HiSierra. | Note: The adapter only work for M-key SSD, cannot work for B-key or B/M-key socket. | M.2 NGFF M-Key NVME SSD Convertor Card for 2014 Macbook Mini A1347 MEGEN2 MEGEM2 MEGEQ2

【High Strength - Safeguarding Your Camera to Wrist Very Securely】Made of high strength parachute rope - high tenacity and high wear resistance. Holds up to 55 pounds. Durable and sturdy | 【Adjustable - Comfortable Fit on a Normal Sized or Bigger Wrist 】12.6" long strap can fit around a wrist loosely or snuggly as it fastens with a slip knot, 1" enough wide and solf materials is very comfortable to wear | 【Universal and Versatil 】Suitable for cameras with a standard tripod socket or angle strap holes. 1) For a large camera, it is suggested to attach this wrist strap to the angle hole with the cord itself. 2) For a small camera like for insta360 x3 x4, Osmo Pocket 3, you can attach the strap to the bottom of camera by the included D-ring screw | 【With a 1/4" Screw】Can be used with selfie sticks, action cameras, handheld gimbal, monocular etc. | 【 Stylish and Portable】Attractive materials, fashionable look. The weight of 1.4 ounces will not add extra burden and discomfort to your hand if worn for a long time. Small enough to fit any pocket

20in1 electronic Cleaning kit,Meeting your cleaning needs, Compatible with most electronic products cleaning,for Apple Airpods,apple watch,IPhone,Pad Charging Port,Macbook Laptop Screen Keyboard Cleaning,Camera Lens Cleaning,Earbuds,Laptop,Mechanical Keyboard Repair Cleaning Tool Kit,with sim ejecy Tool; | Earbuds cleaning kit for AirPods 1/2/3,Pro ,pro2 and other Wireless Earbuds: Easy cleaning that sticky and tough dirt hidden between crack and hole, thoroughly clean the gap.;Plush brush cleans the dust sticks on acoustic mesh, shallow holes, and crack; High-density Brush can easily clean the dirt on the sound outlet hole of the earphone and other parts. | Retractable Brush and Key Remover for Clean Keyboard Keycap: Replacing keycaps and cleaning the bottom of the keyboard is easier with the simple key puller. The high-density brush is large and firm enough to clean flat surfaces such as keyboards and desktops with less labor.easily clean laptop crevices and computer screen , desktop of debris and grime; | Camera Lens Cleaning Pen: Removes fingerprints, dust, and other debris on the lens of your phone and camera that may compromise your images. Works with almost all types of cameras,as well as binoculars, telescopes, and other optical products | All-in-one storage design：The design is more concise and generous, lightweight, and easy to carry. One Cleaning Set can meet your different electronic cleaning needs.

Connector1: USB 3.0 Front Panel Socket / Connector2: USB 3.1 Front Panel Header | The adapter is a converter to convert the available USB 3.0 header of a motherboard into a USB 3.1 header. Thus the USB 3.1 port of a housing can also be supplied with USB 3.1 without a suitable mainboard. | Even the most up-to-date motherboards with AMD AM4 or Intel 2066 sockets are not always equipped with a USB 3.1 header. The adapter is the perfect solution to use the USB 3.1 connectors with Type-C or Type-A. | The small converter is plugged into a USB 3.0 header that provides two USB 3.0 lanes. Thus, two data lines with 5 Gbps each are available, which are bundled into a USB 3.1 header with 10 Gbit / s. | The converter thus provides a full-fledged USB 3.1 port.

Internal Mini SAS SFF-8087 Host to 4 SATA 7pin Target Hard Disk 6Gbps Data Server Raid Cable. | Mini-SAS cable configurations,The SAS system referenced as Mini-SAS (SFF-8087) in the SAS 2.1 standard, meets the 6Gb/s SAS specification. | Internal Mini-SAS Copper Cables,Internal Mini SAS SFF-8087 to to 4 SATA 7pin hard disk data Cable. | This SAS cable enables you to connect up to 4 SATA drives to a Mini SAS SFF-8087 controller. | Cable length:50cm

Hard Disk SFF-8482 SAS Cable 29Pin Male to Female Extension Cable | SAS 29 pin straight SFF-8482 Male to Female cable | Lenght : 50cm | UL2725 26AWG SATA CABLE JACKET RoHS

Compatible with models: MXPR4350 XPR4550 CDM750 CDM1250 GTX800 GTX900 GM300 M1225 SM50 SM120 CM200 CM300 PM400 GM300 GM338 GM950 GM3688 GM3188 Motorola HLN9073B | Metal construction Mic microphone holder clip | Mounts easily with included screws | Each package include 2 pcs

For use with HP SureStore T20i/Xi/Xe drives | 1 tape per pack | Read and write capable | 20 GB capacity (compressed) | 10 GB native capacity

Designed to fit into small camera bags, for small cameras | Concave tip to match the slightly convex shape of the lens | Featuring the LCF invisible carbon | Convenient & easy to use | Compact size & no liquids

CK-105909-169 cleaning kit contains 10 CR80 Cleaning Cards(54mm*86mm) and 10 IPA Swabs | Use these cards depending on usage, or whenever diminished print quality is experienced. and keep your machine running at peak performance levels | Safely and effectively removes dust and oil from print heads. Improves print quality and extends the life | Cleaning for most card readers and ID card printers | More card reader cleaning kits and card printer cleaning kit please visit our Ci Kyan

Internal 36 Pin Mini SAS SFF-8087 Host to 4 SFF-8482 Target SAS Hard Disk and SATA Power Cable | enables you to connect e.g. a controller with mini SAS 36pin connector (SFF 8087) to 4 SAS (SFF 8482) HDD. | Hard Disk Fanout Raid cable | Host: SFF-8087 connector . Target: SFF-8482 SAS connector | With SATA 15pin power connector .100cm

For Security & Surveillance Cameras | CS Mount Compact Size | CCTV LENS 3.5-8.0mm