12V 50A 600W
Failure caused by overload or used for battery will lose the warranty.

Strong cooling fan, Smart Chips
Transparent cover: Dustproof, Prevent accidental touch
Large Capacity, Moderate Dielectric Strength, High ESR.
High quality EMI filter inductor made of copper: Low loss, high efficiency, good heat dissipation, stability.

PROTECTION:
Overload / Overvoltage / Overcurrent / Short-circuit protection: When the output terminal is short-circuited, pause output
Package contains:
1 × POWER SUPPLY
1 × USER MANUAL
Download the multilingual User Manual from "Product Guides and Documentation"

Power multiple devices with different Currents/ Watts
Model example for S-600-12 : Single voltage output, output voltage DC 12V, rated output power 600w, Peak current 50A. For safety, Load recommended is (80%) 0~40A, 0~480W. Load for motor is (50%) 0~25A, 0~300W.

Note: 
Cooling Fan has wind noise.
Keep a distance of more than 3m/10feet from the power amplifier to avoid filter interference.
Not applicable to: Programming/ Speed control motor/ Dimming light/ Grow light/ Power controller /for charging Batteries.
How to choose:
If running 24*7 hours, the load does not exceed 40%.
For device, SMPS power ≥ device power × 1.25 times. For Motor device, the peak power of the SMPS needs to be more than 2 times the power of the Motor.
Main Parameter
Output voltage adjustment range: ±5%
Range Of Difference:±1%
Efficiency: >83% 
Leakage current: <1mA / 230V
Input voltage:AC 110V (85-145V ) / 220V(185-265V)
When AC 85-145V, Frequency 60Hz, Efficiency >80% [Please set aside sufficient POWER Derating for your type of equipment. ]
When AC 185-265V, Frequency 50Hz, Efficiency >70%
Please switch to a suitable voltage before use!