Car mounted radar bracket is newly upgraded with black rubber suction cups, which have stronger suction force and more stable installation. It is fearless of extreme cold and heat, and can firmly adhere to the windshield. | Radar detector suction cup holder can adjust the optimal position between the detector and the windshield by rotating the knob. | Rotary switch is easy to install and can be reused in multiple vehicles,It only needs to be washed with clean water and air dried to maintain its original suction. | Compatible only with Uniden radar detectors: Uniden R1, R2, R3, R4, R6, R7, LRD300, LRD350, LRD400, LRD450, LRD500, LRD550, LRD600, LRD650, LRD700, LRD750, LRD800, LRD850, LRD900, LRD937, LRD950, LRD6199 SW, LRD6499 SW, DF1, DFR2, DFR3, DFR4, DFR5, DFR6, DFR7, DFR8, DFR9. | Packaging includes: suction cup holder, small screwdriver, short connection adapter (if the long adapter on the original suction cup holder is not suitable, please replace the short version with a small screwdriver), both of which are developed for the Uniden radar detector.

Car mounted radar bracket is newly upgraded with black rubber suction cups,which have stronger suction force and more stable installation.It is fearless of extreme cold and heat,and can firmly adhere to the windshield | Radar detector suction cup holder can adjust the optimal position between the detector and the windshield by rotating the knob | Rotary switch is easy to install and can be reused in multiple vehicles,It only needs to be washed with clean water and air dried to maintain its original suction | After experimental testing, although the radar suction cup bracket has a compact structure,it has strong load-bearing capacity and can easily hang a weight of over 10 pounds without pressure | This radar suction cup holder is only compatible with Passport MAX/MAX2/Legacy MAX 360 (2015-2019) radar detectors (not suitable for radar models with magnetic connections)

【Compatibility】Compatible with Escort IX IXc Max 3 Max360C/2020 Max 360 Redline EX Beltronics GT360 Cobra DualPro models with magnetic absorption radar (not applicable to unlisted models) | 【High quality materials】Say goodbye to plastic brackets that are prone to detachment when exposed to high temperatures. Our car mounted rearview mirror radar brackets are made of all aluminum alloy and undergo anodizing treatment to improve corrosion resistance and wear resistance. | 【Stability】 Use a hexagonal wrench to tighten the bolts to maintain the stability of the rearview mirror bracket. Even on rough roads, radar detectors can be fixed firmly and will not shake. | 【Not obstructing sight】The rear-view mirror rod radar bracket can be freely adjusted to the ideal position, and the angle is flexible to avoid blocking the line of sight and ensure driving safety. | 【Easy to install】Device can be completed within a few minutes, please ensure that the length of the rearview mirror lever arm is greater than or equal to 0.4 inches. The bracket handle is equipped with a 1/4 screw adapter interface, which can be extended to different devices.

【Compatibility】Compatible with Escort Passport MAX, MAX2 MAX II 2 old MAX360 (2015-2019) radar detector with metal slide in plate connection (not applicable to radars using magnetic brackets) | 【High quality materials】Say goodbye to plastic brackets that are prone to detachment when exposed to high temperatures. Our car mounted rearview mirror radar brackets are made of all aluminum alloy and undergo anodizing treatment to improve corrosion resistance and wear resistance. | 【Stability】 Use a hexagonal wrench to tighten the bolts to maintain the stability of the rearview mirror bracket. Even on rough roads, radar detectors can be fixed firmly and will not shake. | 【Not obstructing sight】The rear-view mirror rod radar bracket can be freely adjusted to the ideal position, and the angle is flexible to avoid blocking the line of sight and ensure driving safety. | 【Easy to install】Device can be completed within a few minutes, please ensure that the length of the rearview mirror lever arm is greater than or equal to 0.4 inches. The bracket handle is equipped with a 1/4 screw adapter interface, which can be extended to different devices.

【Compatibility】Compatible with Uniden radar detectors:Uniden R1、R2、R3、R4、R6、R7 、 LRD300、LRD350、LRD400、LRD450、LRD500、LRD550、LRD600、LRD650、LRD700、LRD750、LRD800、LRD850、LRD900、LRD937、LRD950、LRD199 SW、LRD6499 SW、DFR1、DFR2、DFR3、DFR4、DFR5、DFR6、DFR7、DFR8、DFR9, Not applicable to other models of radar. | 【High quality materials】Say goodbye to plastic brackets that are prone to detachment when exposed to high temperatures. Our car mounted rearview mirror radar brackets are made of all aluminum alloy and undergo anodizing treatment to improve corrosion resistance and wear resistance. | 【Stability】 Use a hexagonal wrench to tighten the bolts to maintain the stability of the rearview mirror bracket. Even on rough roads, radar detectors can be fixed firmly and will not shake.please ensure that the length of the rearview mirror lever arm is greater than or equal to 0.4 inches. | 【Not obstructing sight】The rear-view mirror rod radar bracket can be freely adjusted to the ideal position, and the angle is flexible to avoid blocking the line of sight and ensure driving safety. | 【Multi functional】The bracket handle is equipped with a 1/4 threaded adapter interface, which can be extended to different devices. The accessory tool includes an additional short connection adapter, which can replace the best connection adapter for your own detector.

COMPATIBILITY compatible with Cobra radar detector iRadar ESD SPX RAD 480i 450 380 7800BT | HIGH QUALITY MATERIALS say goodbye to plastic brackets that are prone to detachment when exposed to high temperatures.Our car mounted rearview mirror radar brackets are made of all aluminum alloy and undergo anodizing treatment to improve corrosion resistance and wear resistance | STABILITY use a hexagonal wrench to tighten the bolts to maintain the stability of the rearview mirror bracket.Even on rough roads,radar detectors can be fixed firmly and will not shake | NOT OBSTRUCTING SIGHT the rear-view mirror rod radar bracket can be freely adjusted to the ideal position,and the angle is flexible to avoid blocking the line of sight and ensure driving safety | EASY TO INSTALL device can be completed within a few minutes, please ensure that the length of the rearview mirror lever arm is greater than or equal to 0.4 inches.The bracket handle is equipped with a 1/4 screw adapter interface,which can be extended to different devices

RJ11 radar coiled power cord includes 3 types of pins,choose as you want.The attached 3 zipper straps make your mirrored lines neat and won't come off.Including instructions on how to use RJ11 radar power lines. | 【Universal Compatibility】This radar detector power cord is compatible with Valentine One,Escort Passport,Uniden,Max,Max 360 and other radar detectors.It is very suitable for Uniden R3,R4,R7,R8,Escort Passport,Uniden LRD950 detectors,and most radar detectors with RJ-11 sockets. | 【Coil Design】Radar detector power cord mirror wire plug of elastic can extend from 1.8 feet to 9 feet,with any length adjustable.Simply insert the pin into 12V and ground it in the RJ11 mirror plug,without the need for trimming. | 【Stable Work Performance】Using injection molding technology and high-quality coarse copper,the radar detector power cord uses pure copper wire with a diameter of 3mm,effectively reducing current loss.Over time,it will provide you with better and more stable connections. | 【Excellent Service】Our radar detector wire plug have undergone strict quality testing.Feel free to contact our customer service team at any time.

COMPATIBILITY Compatible with Escort IX, Escort IXc,Max 3,Max 360c,Redline EX,Beltronics GT360,Cobra DualPro,and radar detectors connected using EZ MAG | STABLE/FIRM The large suction cup on the mounting base of the radar detector has strong adsorption force, and even when driving on rugged mountain roads,it still firmly adheres to the windshield without shaking. Suction cup mount has strong load-bearing capacity and can easily suspend a weight of over 11 pounds without any pressure | HIGH QUALITY MATERIAL The suction cup is made of ABS material.The bracket body is made of aluminum alloy material,which has undergone anodizing treatment to improve corrosion resistance and wear resistance | FREE ADJUSTMENT The ideal position of the radar detector can be freely adjusted 360 degrees at the ball head, with flexible angles to avoid obstructing the line of sight and ensure driving safety | STRONG SCALABILITY A 1/4 threaded port is installed at the bolt of the radar detector suction cup bracket, which can be extended to other devices

Windshield suction cup mount holder made from ABS,It has impact resistance, heat resistance, and low temperature resistance.The suction cup is very easy to install and remove(1 Bracket & 10 Suction Cups) | Dual cup design: Each suction cup measures 35mm in diameter for improved suction and durability.Be sure to apply on a clean, smooth surface. | Compatible:Fits most cars and trucks windshields and dashboards,Compatible with Valentine One V1 Gen1 Radar Laser Detector, WMV1K，Not applicable to models not listed. | Include:1 windshield mount & 10 suction cups（Radar Laser detector not included） | Note: Don't place the mount in or near the deployment area of the airbag,and don't install it in a position that obstructs road observation.

The windshield suction cup bracket has powerful magnetic base that can be connected to the EZ-MAG base port of the radar detector, compatible with radar models such as Escort IX, IXc, Redline EX, Max 360c, Max 3, and 2020 Max360. | Car mounted strong magnetic radar suction cup bracket is made of newly upgraded ABS material, with stronger suction force and more stable connection to the equipment. | After experimental testing, the strong magnetic radar suction cup bracket has strong load-bearing capacity and can easily suspend a weight of over 10 pounds. | Rotary switch is easy to install. Repeated use only requires washing with water and air drying to maintain its original suction. | Please note that the magnetic base bracket is not compatible with radar models that use a sliding in metal plate connection.