Industrial Mini 2.4GHz/5GHz AC1200 Dual Band WiFi Bridge/WiFi Ethernet Adapter/ WiFi Hotspot cover with ethernet port (small size); Can achieve WiFi to Wired or Wired to WiFi function(WiFi to Ethernet or Ethernet to WiFi convert) ; Support WiFi 802.11ac/a/b/g/n/, WiFi rate: 300Mbps (2.4GHz) + 900Mbps (5GHz); one 10/100Mbps adaptive Ethernet cable and one USB/DC power cable（30cm); | Point-to-point

Environmental,needn't extra power supply,reducing e-waste. | Portable,small size good for plug and play,no need to reset. | Professional intelligent WiFi repeater,support WiFi hot spots scan automatically and WiFi hot spot memory function. | Support connecting more than 20 pieces WiFi terminal at the same time. | 100 meters transmission distance(without obstacle).

Great Wi-Fi bridge for surveillance gears and computer peripherals such as IP camera, CCTV DVR, computer, printer, network switch etc | Maximum Wi-Fi transmission range up to 200ft (without obstacle) | Supports 802.11n, 802.11g and 802.11b. Fast data transmission rate at 300Mbps max | Video user guide:https://youtu.be/Bj8gQYPNF9I | Support connecting more than 20 pieces WiFi terminal at the same time. Any set up questions, just feel free to contact us: [email protected]

【Pay Attention】This Ethernet Splitter does not compatible/support other devices! Only support devices with VONETS VAP11S, VAP11S-5G WiFi Bridge/Router, need to plug it into the VAP11S/VAP11S-5G female socket ,set up on the VONETS product configure interface, open the connect function in the webpage, and then use it. | 【Extend 1 to 2 Ethernet cables 】Use this network splitter to easily convert an RJ45 connection to two RJ45 sockets, allowing two devices to share network, cable modem and Ethernet ports without the need for a router.It supports 2 devices sharing the internet at the same time. | 【Good Design】 This ethernet male to female splitter adapter lan cable solves the problem of avoiding pulling cables back and forth. It can compatible with ADSL, hubs, switch, TV, set-top box, Router,Bridge,Repeater, wireless device, computer, compatible with Cat5. | 【Application】When you want to use the device with ethernet, using this RJ45 splitter, you don't have to worry about no Internet. this rj45 1 to 2 ways RJ45 ethernet splitter help you do not have to pull back and forth cable. Installation simple and easy to use. | 【NOTE】This is not a router, just a RJ45 Ethernet splitter. Plug it into the VONETS VAP11S/VAP11S-5G female socket, and open the connect function in the VONETS webpage and then use it.

【2024 New Upgrade】 New Process Design, Super Stability, A new independent cooling fan is added to adapt to various complex environments.This WiFi Bridge/Repeater/WiFi to Ethernet Converter allows most Ethernet devices to access the Internet through a wireless connection | 【Standard WiFi Parameters】Dual-band wireless bridge Added router function to receive and re-signal, fast WiFi transmission rate: 300Mbps (2.4GHz) + 900Mbps (5GHz), supports 802.11A/B/G/N/AC and other network protocols, 2.4G has strong anti-interference capability, 5G can greatly improve the transmission rate and distance | 【Multiple Power Supply Options】One power cable with wide voltage DC5V-15V power supply, USB or DC optional (typical 5V/2A, ripple less than 100mV), one RJ45 100Mbps network cable 2-in-1 dedicated cable | 【Applicable to Multiple Network Devices】Card size takes up little space, easy to carry, suitable for wired or wireless devices such as surveillance, electronic scales, DVR, IP cameras, medicine, Internet of Things, etc. where wiring is difficult and Internet is required | 【Warm Tips】Please check the manual or configuration video in detail before use for a successful one-time configuration, if you have any questions, please contact [email protected] for solutions

📶 【WiFi to Ethernet Convert】Industrial Mini 2.4GHz WiFi Bridge/Wireless Repeater/WiFi Ethernet Adapter (small size) ; can achieve WiFi to Wired or Wired to WiFi function(WiFi to Ethernet or Ethernet to WiFi convert) ; Support WiFi 802.11b/g/n, WiFi rate:300Mbps; One 10/100Mbps adaptive Ethernet port (one 30cm cable with 1 male RJ45 port). | 🔌【Powered Supply and Parameters】USB or DC optional powered mode, one 30cm power cable with 1 male DC port and 1 male USB port, one female DC port of parallel connection. Powered by wide voltage DC5V-15V(Typical 5V/1A, ripple less than 100mV) ; | 👍【Great Ideal for WiFi or RJ45 Ethernet Network Devices】Good partner for monitoring, electronic scales, DVR, IP camera, medical devices, IoT devices, video transmission, industrial PLC, PS3, network Printer, robot, doll machine and more Network devices and applications. WiFi Tx Power:14.5dBm/16dBm optional(Enhanced Power); Point-to-point transmission distance: maximum can be up to 80 meters when without obstacle and small data, then less than 50 meters when used for video transmission; | 💎【Support three kinds of Application Methods】WiFi Repeater(Wireless Signal Repeater): can extend the distance of WiFi signal coverage, WiFi transfer and WiFi access point (AP), WiFi Bridge: can smart control the device's WiFi mode (IP layer or MAC layer transparent transmission), WiFi AP hotspots. | ★【Function and Technical Application】WiFi hotspot auto reconnect, two hotspot matching methods: full match authentication mode; SSID and password authentication mode, support SSA signal strength detection reporting function, motion detection function and storage hotspot (up to 100) auto match connection function, realize WiFi motion applications. User Video Guide: https://youtu.be/Bj8gQYPNF9I , contact us: [email protected]