Swab comes from its unique letter "V" shape: The narrower edge of the V shaped swab minimizes the contact between the the swab and the chamber wall. This ultimately eliminates the lint produced inside the camera eventually from falling on the sensor | Better maneuverability and easy swabbing while inside the chamber. Due to its triangular form The Vswab (patent pending) applies equal pressure to the edge of the swab pad. This brings a more homogeneous swabbing motion and less streaking along the edges
These professional bellows is suitable for cleaning the inside of the case a camera including the sensors. It can be used but can also be used to clean other prescription glasses. It frees durch a powerful air current performance PFOA-free locker particles. Due to the dual filter system can hold the bellows No Dust Particles into the interior and is therefore not Aussten. | Can not enter the dust particles through air outlet, the bellows on the back the filter off stehend. The added risk is very low, but this position can be adjusted will also provide a stable position and the bellows can don't roll off the table. For storing and carrying is also available as a storage bag made of plastic. | The Zee Pro bellows can be used in conjunction with a suitable FlexoDome bellows guide. This guide ensures that the bellows sensitive areas of or even touches the sensor of the camera does not. Also provides a Prsise positioning the bellows to the housing inner. | Lot of conventional Blaseb algae have just a or no filter and so have not suitable for cleaning of sensitive components. It absorbs the dust particles and drink then straight back on the eigentlich to clean. In the worst case can be it to start damage. For powerful air flow sorgt with Zee Pro bellows Large Rubber bellows. Suitable for transporting and storage in a storage bag made of faux leather included in the delivery. | The large rubber bellow: of the blower sits comfortably in the hand and provides ample volume for powerful air flow. It should always be only produces quick yet strong air currents. Ensure Aufgewirbelte particles is not in the interior of the Balsebalgs situation, both at the top and at the end of the bellows je installed a filter. Make it particles the next air flow not the camera sensor blown. It should be always put together to ensure that the tip of the Kamerase