Designed for the Raspberry Pi 4 this Extra Heavy Duty Aluminum Alloy Case Protects the Pi like no other! | Includes Pre-installed, ready to connect fan to keep your keep your processor cool | Includes Easy to understand Instructions-Screwdriver and screws fro easy installation and Rubber Non-SLip Pads for the bottom of the case | Includes screws, screwdriver and non slip pads | Backed by the no questions asked 1 Year Vilros Warranty
Includes Pi Zero W -Featuring :802.11 b/g/n wireless LAN-Bluetooth 4.1-Bluetooth Low Energy (BLE) | 2.5A Power Supply Designed for Raspberry Pi-HDMI-Mini HDMI Adapter-Micro USB OTG | Premium Black Case with 3 Covers-1 Closed Cover-1 with GPIO Access Cover-1 with Camera Mount Cover | 40 Pin Header---Heatsink for Raspberry PI Zero--Camera Module Adapter | All Parts Covered Under the Vilros 1 Year Warranty
The ultimate Arduino Uno kit to get you started with hundreds of Arduino project | Includes the Arduino Uno Rev3 Board | Bread Board -- Holder -- Jumper Wires -- USB Cable -- LEDs -- DC Motor -- Small Servo -- Relay | Includes 16x2 LCD with soldered Pin header | 72-page full-color Instruction Manual
Includes: Raspberry Pi Zero W -Featuring :802.11 b/g/n wireless LAN-Bluetooth 4.1-Bluetooth Low Energy (BLE) | 16GB Micro SD Card Preloaded With NOOBS--MicroUSB to USB 4 Port Black OTG Hub for Raspberry Pi Zero | 2.5A Power Supply Designed for Raspberry Pi--Premium Black Snap together Case with 3 covers (Closed-GPIO Access -Camera Module Mount) 5ft HDMI to Mini HDMI Cable | Heastsink--2x20 Pins Strip Dual Male Header For Raspberry Pi Zero--Camera Module Adapter | Please note that the 2x20 pins strip is included inside the box which has the black case
27W USB-C PD (Power Delivery) power supply for a range of PD-enabled USB-C devices, including the Raspberry Pi 5! | High-efficiency 27W power supply offers standard PD modes including 5V/3A, 9V/3A, 12V/2.25A and 15V/1.8A, alongside a custom mode for the Raspberry Pi 5, offering 5V/5A. | PD voltage options makes this a great Power source for all your devices including phones, laptops and more! | When used with the Raspberry Pi 5, this power supply will provide 5V/5A and enabling max output to the USB Ports.
40 Pin Male Hammer-In Header for Raspberry Pi Zero, Zero w, and Zero 2 W Boards | Easy to install using the Vilros Pi Zero Pin Header Install Rig (Sold Separately-Search ASIN: B09XRGQ936)
Simple and easy no solder solution to install a pin header on a Raspberry Pi Zero & Zero W, Zero W 2. | High Quality acrylic base & metal striking plate for a sturdy easy install without the need to fasten bolts or worry about breaking the rig during installation | Includes one 40 pin male header- additional headers can be purchased separately to be reused with the rig | Addtional Pins available for purchase (ASIN B09XVPYYTX)
Set of 6 heatsinks to be applied on 6 chips of a Raspberry Pi 5 Board | Heatsinks Feature Thermal Sticker backing for easy application | Includes detailed aplications image and instuctions including numbers on the each heatsink | Main Heatsink coutours to the shape of the main chip to ensure max contact
BASIC STARTER KIT FROM A RASPBERRY PI APPROVED RESELLER: Basic Starter Kit for Pi 4 Includes Raspberry Pi 4 Model B Board (8GB) with basic accessories to get started. | INCLUDES BASIC VITAL ACCESSORIES TO GET STARTED: Eight part Includes: 1. Raspberry Pi 4 Model B (8GB RAM) 2. ABS 2 Part Snap Assembly Case 3.Raspberry Pi 4 compatible 3A Power Supply with on/off switch 4. Cooling Fan (Preinsstalled In case) 5. Standard .HDMI (Female) to Micro HDMI Male Adapter 6. Heatsinks (set of 4) | RASPBERRY PI 4 MODEL B SPECS: Dim: 85.6mm × 56.5mm-Processor: Broadcom BCM2711, quad-core Cortex-A72 (ARM v8) 64-bit SoC @ 1.5GHz--Memory: 8GB LPDDR4--Connectivity: 2.4 GHz and wireless LAN, Bluetooth, Gigabit Ethernet 2×USB 3.0 ports 2×USB 2.0 ports---GPIO: 40-pin GPIO header---Video & Sound: 2 × micro HDMI ports---Multimedia: H.265 H.264 OpenGL ES, 3.0 graphics SD card support: Micro SD card slot for OS & data---Input power: 5V DC via USB-C connector, 5V DC via GPIO header, POE(requires HAT) | PASSIVE & ACTIVE COOLING : Includes case is well vented and kit includes a set of heatsinks with thermal stickers for easy application and pre-installed fan to keep the board cool in any use. | CONVENIENT ACCESSORIES: Power supply features inline on/off switch neoprene bag holds and protects all the parts when not in use and quickstart guide is updated and written for raspberry pi 4. | IMPORTANT: Kit does NOT include SD card Keyboard, Mouse or Monitor. | WARRANTY: All products are full covered by the vilros 1 year warranty
A RASPBERRY PI KIT FROM AN APPROVED RESELLER: Basic Starter Kit for Pi 4 Includes Raspberry Pi 4 Model B Board (4GB) with basic accessories to get started. | INCLUDES BASIC VITAL ACCESSORIES TO GET STARTED: Eight part Includes: 1. Raspberry Pi 4 Model B (4GB RAM) 2. ABS 2 Part Snap Assembly Case 3.Raspberry Pi 4 compatible 3A Power Supply with on/off switch 4. Cooling Fan (Preinsstalled In case) 5. Standard .HDMI (Female) to Micro HDMI Male Adapter 6. Heatsinks (set of 4) 7.Neoprene Storage bag 8. Vilros Quickstart Guide for Raspberry Pi 4 | RASPBERRY PI 4 MODEL B SPECS: Dim: 85.6mm × 56.5mm-Processor: Broadcom BCM2711, quad-core Cortex-A72 (ARM v8) 64-bit SoC @ 1.5GHz--Memory: 4GB LPDDR4--Connectivity: 2.4 GHz and wireless LAN, Bluetooth, Gigabit Ethernet 2×USB 3.0 ports 2×USB 2.0 ports---GPIO: 40-pin GPIO header---Video & Sound: 2 × micro HDMI ports---Multimedia: H.265 H.264 OpenGL ES, 3.0 graphics SD card support: Micro SD card slot for OS & data---Input power: 5V DC via USB-C connector, 5V DC via GPIO header, POE(requires HAT) | PASSIVE & ACTIVE COOLING : Kit includes heatsink with thermal stickers for easy application and if that this not enough you can also connect the pre installed fan to keep the board cool in any use | CONVENIENT ACCESSORIES: Power supply features inline on/off switch neoprene bag holds and protects all the parts when not in use and quickstart guide is updated and written for raspberry pi 4 | IMPORTANT: Kit does NOT include , SD card Keyboard, Mouse or Monitor. | WARRANTY: All products are full covered by the vilros 1 year warranty
New Model : (August 2023) Simple and easy no solder solution to install a pin header on a Raspberry Pi Zero, Zero W & Zero W 2. | Heavy Duty Metal Base and striking plate for a sturdy easy install without worrying about breaking the rig or board during installation | Includes 2x 40 pin male headers---Additional pins available for purchase (AMAZON ASIN B09XVPYYTX)
✓ Raspberry Pi 3 b+ (RPi 3+) Released in March 2018--Broadcom BCM2837B0,Cortex-A53, 64-bit SoC @ 1.4 GHz Features Upgraded On-board WiFi and Bluetooth Connectivity (Made In the UK) | ✓ Includes Premium Clear Transparent Case with 2 Covers-for all kinds of use--1 Sleek Closed Cover-1 Cover with All Port Access | ✓ Includes UL Certified 2.5 Amp USB Power Supply with 5Ft Micro USB Cable, Noise Filter & ON/OFF Switch | ✓ Set of 2 Heatsink--Vilros Raspberry Pi Quick start guide for Media Center and Retro Gaming | ✓ This kit is fully guaranteed for 1 year with our 5 Star US based Customer Support
Raspberry Pi 4 Model B With 8GB RAM and Basic adapters for easy use. | Includes: Raspberry Pi 4 Model B 8GB RAM | HDMI (Female) to Micro HDMI (Male) Adapter | USB (female)-USB-C (male) Adapter-Heatsink Set of 4 | Vilros Raspberry Pi 4 Quick Start Ebook Download Code
Designed for The Raspberry Pi 4--This Fully vented Case with Fan is designed to keep your Pi 4 as cool as possible for optimal performance | 2 Part Clear Transparent Case With Easy Installation Insert PI into Bottom Part, Connect Fan and snap on top part | Includes Pre-installed Ready to use and easy to connect Fan | Includes 1 Vented Bottom Base Part and 1 Top cover featuring a preinstalled fan, an open GPIO port and camera module mount for easy acsses to all ports and maximum airflow
Designed for the Raspberry Pi 4 this Extra Heavy Duty Aluminum Alloy Case Protects the Pi like no other! | Includes Pre-installed, ready to connect fan to keep your keep your processor cool | Includes Easy to understand Instructions-Screwdriver and screws fro easy installation and Rubber Non-SLip Pads for the bottom of the case | Includes screws, screwdriver and non slip pads | Backed by the no questions asked 1 Year Vilros Warranty
A RASPBERRY PI 5 KIT FROM AN APPROVED RESELLER: This Vilros Complete Starter Kit for Pi 5 Includes Raspberry Pi 5 Board with all the accessories you need to get started. | 11 PART KIT INCLUDES MOST ACCESSORIES NEEDED YOU TO GET UP AND RUNNING : 1.Raspberry Pi 5 Board-2.Metal/Aluminum Alloy Passive & Active Cooling Case-3.Raspberry Pi 5 Compatible Power Supply-4. PWM fan With 10k Max RPM Capacity (pre installed in the case)--5. 128GB Micro SD Card With 64bit Raspberry Pi OS Preinstalled-6. Micro SD to USB Adapter to rewrite SD card if Desired-7-8. 2x Standard HDMI to Micro HDMI Cables (5ft)--9.Neoprene Storage bag-10.Vilros Quickstart Guide for Raspberry Pi-11. Mini To Standard Camera Module Adapter Cable to use a camera module with a PI 5 | RASPBERRY PI 5 SPECS AND FEATURES:--Processor: Broadcom BCM2712 2.4GHz quad-core 64-bit Arm Cortex-A76 CPU, with cryptography extensions, 512KB per-core L2 caches, and a 2MB shared L3 cache----Features: 2.4GHz quad-core, 64-bit Arm Cortex-A76 CPU-VideoCore VII GPU supporting Vulkan 1.2 and OpenGL ES-LPDDR4X-4267 SDRAM (4GB and 8GB options)--PCIe 2.0 x1 interface for fast peripherals ( Requires adapter)--Dual-band 802.11ac Wi-Fi 2.4 GHz and 5.0 GHz -Bluetooth 5.0 / Bluetooth Low Energy (BLE) | MULTIFUNCTION PASSIVE & ACTIVE COOLED CASE : Case feautes a built in pole/column that contacts the main chip on the raspberry pi 5 board via an included thermal pad too passively cool the board and also includes a preinstalled PWM Fan that plugs directly into the fan port on the board. The fan will only turn on if needed and will also increase RPMs as needed. Other features include a built in power button that shows the on board light status, camera module compatiblilty, can be used in single layer configuration for hat compatibilty | IMPORTANT: Kit does NOT Include Monitor, Keyboard, Mouse
A RASPBERRY PI 5 KIT FROM AN APPROVED RESELLER: This Vilros Complete Starter Kit for Pi 5 Includes Raspberry Pi 5 Board with all the accessories you need to get started. | 10 PART KIT INCLUDES MOST ACCESSORIES NEEDED YOU TO GET UP AND RUNNING: 1. Raspberry Pi 5 Board-2.Metal/Aluminum Alloy Passive & Active Cooling Case-3.Raspberry Pi 5 Compatible Power Supply-4. PWM fan With 10k Max RPM Capacity (pre-installed in the case)--5. 32GB Micro SD Card With 64bit Raspberry Pi OS Preinstalled-6. Standard HDMI to Micro HDMI Adapter Cable--7.Neoprene Storage bag-8.Vilros Quickstart Guide for Raspberry Pi-9. Mini To Standard Camera Module Adapter Cable to use a camera module with a PI 5 -10.RTC battery Connector (MODEL# :VILP314 ) | RASPBERRY PI 5 SPECS AND FEATURES:--Processor: Broadcom BCM2712 2.4GHz quad-core 64-bit Arm Cortex-A76 CPU, with cryptography extensions, 512KB per-core L2 caches, and a 2MB shared L3 cache----Features: 2.4GHz quad-core, 64-bit Arm Cortex-A76 CPU-VideoCore VII GPU supporting Vulkan 1.2 and OpenGL ES-LPDDR4X-4267 SDRAM (4GB and 8GB options)--PCIe 2.0 x1 interface for fast peripherals ( Requires adapter)--Dual-band 802.11ac Wi-Fi 2.4 GHz and 5.0 GHz -Bluetooth 5.0 / Bluetooth Low Energy (BLE) | MULTIFUNCTION PASSIVE & ACTIVE COOLED CASE: The case features a built-in pole/column that contacts the main chip on the Raspberry Pi 5 board via an included thermal pad to passively cool the board and also includes a preinstalled PWM Fan that plugs directly into the fan port on the board. The fan will only turn on if needed and will also increase RPMs as needed. Other features include a built-in power button that shows the onboard light status, camera module compatibility, and can be used in single layer configuration for hat compatibility | HIGH QUALITY COMPONENTS: All components are manufactured with Raspberry Pi in mind and are backed by the Vilros 1 Year wartranty. | HIGH-QUALITY COMPONENTS: All components are manufactured with Raspberry Pi in mind and are backed by the Vilros 1-Year warranty.
A RASPBERRY PI KIT FROM AN APPROVED RESELLER: Basic Starter Kit for Pi Zero W 2 Includes Raspberry Pi 4 Model Pi Zero W 2 with basic accessories to get started. | INCLUDES BASIC VITAL ACCESSORIES TO GET STARTED: Ten part Includes:1. Raspberry Pi Zero W 2 Board 2.Multi Use Case 3. Power Supply 4. Micro USB to USB OTG Adapter 5.HDMI to MINI HDMI Adapter 6.Heatsink 7.40 Pin Header 8.Camera Module Adapter Cable 9.Storage Bag 10Vilros Pi Zero Quickstart Guide | Raspberry Pi Zero 2 W Key features: 1GHz quad-core, 64-bit ARM Cortex-A53 CPU VideoCore IV GPU 512MB LPDDR2 DRAM 802.11b/g/n wireless LAN Bluetooth 4.2 / Bluetooth Low Energy (BLE) MicroSD card slot Mini HDMI and USB 2.0 OTG ports Micro USB power HAT-compatible 40-pin header Composite video and reset pins via solder test points CSI camera connector | CONVENIENT ACCESSORIES: Power supply features inline on/off switch neoprene bag holds and protects all the parts when not in use and quickstart guide is updated and written for raspberry pi zero | IMPORTANT: Kit does NOT include , SD card Keyboard, Mouse or Monitor.