【Versatility】☛Bottom: with 1/4" screw hole, can be used with the removable 1/4" hot shoe adapter (Package Includes) ☛Top：With 1/4" screw, widely applicate for camera ,flash light, light stand, tripod etc. 🌸 The combination of this mini ballhead and other light stands can be used as a Vive stand. Note: This package not includ light stand, but our store sells the light stand separately. (ASIN: B07J5N1W94, B07K9L9QLW, B07LBKDJ64, B07MP9M4C7) | 【Multi-angle Use】360 degree panoramic rotation; 90 degree tilt rotation; Ball head diameter is about 23mm, and it can be fixed easily by locking knob for meeting different shooting angle. | 【Light Weight & Portable】Weight: 85g / Pc; Size：65 * 17 * 17mm / Pc, small size and lightweight, easy to carry. | 【Max Weight Capacity】2.5kg weight capacity; Material: plastic+metal; With anti-slip rubber on the top for better protection. | 【Package Includes】2* mini ball head; 2* removable 1/4" hot shoe adapter.

【Arca-Swiss quick release plate】Straight-grain knobs (non-apron design, no idling). Compared with ordinary quick release boards, it is more slip resistant and anti-dropping. Compatible with Arca-Swiss standard quick release plate of Manfrotto be free. ※Clamping range: 40-45mm | 【Build In Bubble Level】There are three levels of level included (both sides of the quick release plate & the side of the locking knob), to help you perceive your position more accurately. | 【Corrosion resistance & anti-skid】 The quick release plate is made of high-strength aluminum alloy material, which has undergone anodized surface treatment, which is corrosion-resistant and wear-resistant; it has a non-slip function, which can well protect the camera. ※L-shaped inner hexagonal small wrench is included. The design is simple and light. Both ends of the (wrench) can be used. | 【With ruler & 3/8 to 1/4 screw】you can use the attached 1/4 screw to directly connect to a tripod/monopod for indoor and outdoor photography. | 【Size & Product List】1xMount:7.6x5cm,1xQuck release plate:3.7x5cm,1xHexagon wrench

【Wide Application Rang】Top with 1/4 '' male thread , bottom with 1/4 '' female thread hole, come with a 1/4 hot shoe interface adapter (Removable). This ball head set can be used for cameras, or other camera devices and accessories with standard 1/4" thread hole which can be attached to the camera. | 【360 Degree Swivel Tripod Head】 Ensure 360 degree horizontal rotating and from -90 degree to 90 degree tilting for panoramic photography when adjusting the angle. | 【With Locking Knob】 Aiming and horizon leveling can be easily accomplished. You also can use the knob to adjust to the desired angle to meet your needs at different angles. | 【Strong & Durable & Safe】Made of aluminum alloy, the Max load is 3KG (6.6lbs), Very strong and durable. With rubber-padded mount on the top to protect your camera from potential scratches between your camera and the mounting part. | 【Light Weight & Portable】Ball head weight 137g, height 60mm, bottom diameter 30mm, ball dimmeter 20mm . 1/4 hot shoe Weight:6g. Packing includes: 1 x 360 degree ballhead; 1 x Removable 1/4 hot shoe interface adapter.

【Size and Material】 The length of the straight flash Bracket is 30.3cm/11.8in. Compared with similar regular products, this camera bracket is longer, flash extension bracket made of aluminum alloy, sturdy and durable, with strong load-bearing capacity. | 【Ingenious design】There are standard 1/4-inch and 3/8-inch screw holes in the middle of the dual flash bracket, which can be installed on a camera or a light stand. | 【Easy to carry】 The size of the dual camera mount is convenient to carry, suitable for use in various occasions, and is an indispensable important equipment for photographers. | 【Advantage】Compared with other similar dual camera mount that can only install one camera and one flash, our dual flash bracket can install two cameras and two flashes (or two other photography accessories) at the same time, ensure balance to meet different shooting needs. | 【Application】 Flash bracket meets the needs of multi-functional expansion, suitable for dual camera shooting, or match with video lights, fill lights, microphones etc at the same time.

【Package Included】 1*11 inch/29cm Articulating Magic Arm, 1* Large Super Clamp. | 【Magic Arm】 With 1/4" screw, 360 Rotation; With mounting hole and hot shoe, it is easily and effectivly to install or adjust on any camera accessories. | 【Super Crab Clamp】 With anti-slip rubber pad, it can increase the friction and reduce scratches, Allowing Tighter, Securer and More Stable Installation. Max openning size of Crab Clamp is 2.16inch | 【Versatility and Facility】 The unique design of this set allows universal mounting options such as DSLR camera, LCD field monitor, flash light, LED video light and crossbars. No need to drill on the wall or any platform. | 【Material】Made of stainless steel and aluminium alloy, rust-resistant and durable, steady.It features an ergonomic wingnut for great convenience that could help to adjust any angles based on your needs.

【Universal 1/4” Screw】☛Bottom: with 1/4" screw hole, can be used with the removable 1/4" hot shoe adapter (Package Includes) ☛Top：With 1/4" screw, widely applicate for camera ,flash light, light stand, tripod etc. The combination of this mini ballhead and other light stands can be used as a Vive stand. Note: This package not includ light stand. | 【Panoramic Shot】360 degree panoramic rotation; 90 degree tilt rotation; Ball head diameter is 12mm, and it can be fixed easily by locking knob for meeting different shooting angle. | 【Locking Knob】 Aiming and horizon leveling can be easily accomplished. You also can use the knob to adjust to the desired angle to meet your needs at different angles. | 【Sturdy & Durable】1.1lb weight capacity; Material: plastic+metal; With rubber-padded mount on the top to protect your camera from potential scratches between your camera and the mounting part. Apply for Light-weight Devices such as Sport Camera、Pocket Light、Microphone, etc. | 【Light Weight & Portable】Weight: 0.15lb/pc; Size：2.36in*0.86in*0.98in/pc, small size and lightweight, easy to carry. Package includes: 2 Pack mini ball head with 2* removable 1/4" hot shoe adapter.

【Wide Application】Top with 1/4" male thread , bottom with 3/8" female thread hole, come with 3/8" to 1/4" convert screw and a 1/4 hot shoe interface adapter (Removable). This ball heads can be used for cameras, or other camera accessories with standard 1/4" thread hole which can be attached to the camera. | 【360 Degree Swivel Tripod Head】 Ensure 360 degree horizontal rotating and from -90 degree to 90 degree tilting for panoramic photography when adjusting the angle. | 【With Locking Knob】 Aiming and horizon leveling can be easily accomplished. You can use the knob to adjust to the desired angle to meet your needs at different angles. | 【Strong & Durable & Safe】Made of aluminum alloy, the max load is 11LB (5KG), very strong and durable. With rubber-padded mount on the top to protect your camera from potential scratches between your camera and the mounting part. | 【Light Weight & Portable】Ball head weight 0.28lb, height 2.59inch, bottom diameter 1.37inch, ball dimmeter 0.94inch. Packing includes: 2 x ball head; 2 x removable 1/4 hot shoe interface adapter.

Fast Rapid Adapter - UTEBIT adapter is a locking adapter that quickly switches between devices. Suitable for flat head light stand, boom arm. With 2PCS, One purchase to meet your basic needs.. | With 1/4 Screw - 1/4 screw on top, Can be installed vertically or horizontally. Fit for more equipment, include photography lights, flashlights, pan/tilt, quick-loading boards or cameras. (NOTE: Not Fit standard 5/8 baby pin) | Easy To Use - Very easy to use, not complicated. Just put the adapter on the bracket and tighten the knob. Then install another device with a 1/4 screw hole. | High Quality - Material: Aluminum. Colour: Black. Made from high quality materials, it can be reused and has a long service life. | Package & After-sale Service - 2* Fast rapid adapter. If you have any question please contact us, we will resolve your problem within 24 hours.

【Ergonomic & Durable】This magic arm clamp made of stainless steel and aluminium alloy, rust-resistant and durable, steady. It features an ergonomic wingnut for great convenience that could help to adjust any angles based on your needs. | 【360 Rotation Magic Arm】This 9inch articulating magic arm equiped with double 360 degrees ball head, adjusts any angles based on your needs. With 1/4" screw on both ends, it is easily and effectivly to install or adjust on any camera accessories: flash lights, microphone, LCD monitor, DV Monitor, microphone on one end and other accesorries like cage. Max Load capacity: 4.4LB/2KG. | 【Super Crab Clamp】This magic arm with clamp was made of lightweight aluminum alloy, comes with 1/4"-20 and 3/8"-16 thread and can be mounted virtually anywhere, such as cameras, lights, umbrellas, hooks, cross bars, even other Super Clamps.The width of the clamp can be freely adjustable for mounting on different object. It can open maximum 2.16inch. | 【Rubber Cushion】Both the Super Clamp and the Articulating Magic Arm features a rubber cushion which could prevent the scratches of monitor and help to lock your accessories tighter. Super Clamp with anti-slip rubber pad, it can increase the friction and reduce scratches, allowing tighter, securer and more stable installation. | 【Versatility and Facility】The Package comes with a super clamp with 1/4" and 3/8" threads and an articulating arm with 1/4” screws on both ends respectively. Easy Installation, No need to drill on the wall or any platform. The unique design of this set allows universal mounting options such as DSLR camera, LCD field monitor, flash light, LED video light and crossbars.

【Wide Apply】The c clamp mount set is designed to mount onto anything like cameras, lights, umbrellas, hooks, shelves, plate glass, cross bars, even other Super Clamps. | 【Adjustable C clamp Jaw】This size of this desk clamp is 4.6inch* 2inch, weight: 0.15lb, max Loading Weight: 6.61lb. The C clamp Jaw can be expanded to Max.1.2inch, compatible with the desk or tube within 30mm thickness. | 【What You Get】Our camera mount clamp equipped with non-slip rubber pad, avoid damage to the camera desk by friction, prevent your application from slipping and scratching. Also this set including 1 pc mini ball head. | 【Durable】This c-clamp with ball head is made of aluminum alloy, plastic, metal, sturdy and durable. Suitable for photo, studio, photography, DSLR, Go-pro, video light, travel recording. | 【Lifetime Warranty】Package including 1pc c clamp +1 pc ball head. Any quality problem please contact after-service, we will help you at first time.

[Multiple Combinations] This set includes a magnetic base, a 360-degree swivel ball head, a phone holder, a 1/4 hot shoe and an action camera adapter, which can be combined freely, suitable for a variety of devices and multiple environments to meet different needs. | [Widely used] The ball head and hot shoe can be used for cameras, lamps and other equipment, and can be matched with tripods, desktop stands and so on. The phone holder and the action camera adapter are suitable for mobile phones, mini screens and gopros. With the magnetic base, no need to paste, easy to install and take, expand the range of places that can be used. | [Super Magnetic Force] The equipped magnetic base has 6pcs strong magnets built in, which is stronger than ordinary magnets, with a vertical suction force of up to 20kg. The strong magnetic force firmly fixes the device and prevents it from falling. The aluminum alloy mini ball head is light and durable, the max load is about 3kg. | [Universal] The mounting scew and thread of the magnetic base, ball head, hot shoe, action camera adapter and phone holder are all 1/4, suitable for most photographic equipment. The set can not only fix the equipments for you, but also can be used with other photographic equipments to reduce the burden and easily record beautiful moments. | [Specification] Package contents: 66mm magnetic base, 20mm ball head, phone holder, 1/4 hot shoe, action camera mounting adapter. Note: Please keep the magnetic base away from any magnetic stripe cards to avoid being demagnetized.

【360 Degree Swivel Panoramic Shot】Our tripod head not only 360 degree rotation, but also panoramic shot. It equipped with 3 knobs for adjustment, adjust ball head angle by the turn knob, you can set your camera at any different angle according to your needs. | 【Universal Clamping Platform】The top part of the camera has a universal flatbed, designed with universal clamping platform, CNC precision finishing, you can easy to set up and remove in seconds, it has both horizontal and vertical bubble level to enhance perception of position. | 【Sturdy & Durable】 Our tripod head made of aluminum alloy, very strong, durable, and corrosion-resistant. With rubber-padded mount on the top to protect your camera from potential scratches Maximum load capacity is 11.02lb/5kg. | 【 Wide Use】The 30mm ball diameter allows for more stable and flexible adjustment, 1/4 " camera thread screw and 3/8 " bottom screw thread making it suitable for a wide variety of most digital DSLR cameras Video Cameras, camcorders, tripods, sliders, monopods. | 【Package Inluding】It come with 1* mini ball head, 1* holder , 1* E-shaped mobile phone clip, 1* Gopro screw, 2* 1/4” inverted 3/8” screw. Weighing only 270g, ultra lightweight, extremely useful for photograph and videograph. If you have any question, please contact us at any time : )

【360 Degree Rotation】- Tripod clip clamp with ball head, which can rotate 360 degrees, it is very convenient to adjust to the shooting angle. Maximum load: 3 kg. 360 degree camera clip can be used for studio background camera, speedlites, SLR, DSLR, mobile phone, etc. tripod clamp. | 【Tripod Clamp Mount】- Max folder diameter 5.5cm for wide application range such as bicycle head, light stands, background support, boom arms and table, etc. (Please confirm the item been clamped well before let it go when using the clip, please be careful with to your hands ) | 【Best Photography Accessory】- Clamp with camera mount with Locking Knob, aiming and horizon leveling can be easily accomplished. Handy camera mount replacing tripod/monopod for anywhere, outdoors, sports, vacations etc. | 【Non-slip Design】- The tripod camera clip clamp main body is made of metal, sturdy and durable. Both sides of the champs mouth are equipped with a rubber protective cover to protect the folder items, also with a good adhesion. | 【Packing list】: clamp tripod spring clamps, standard 1/4 inch charge, suitable for SLR cameras, wireless flash device, hot shoe, tripod, etc.