Two installation methods: This wireless bridge bracket mount can be installed on a pole or wall-mounted, and you can choose to install it according to your needs, which is very convenient for you. | 150 degree adjustment: The rod of wireless bridge bracket mount can be adjusted up and down by 150°. After you install the CPE, adjust the angle of the rod to receive signals of different strengths. | Firmness: This wireless bridge pole mount is designed with non-slip gears. After you adjust the angle of the rod, you only need to twist it lightly, and the rod will be firmly fixed. And this pole mount is equipped with two hoops to firmly fix your mount on the rod. | Waterproof: The surface of this pole mount is painted, and the top is equipped with a waterproof cap, which makes this bracket mount a good waterproof performance. It’s very suitable for outdoor use. | Wide application: This wireless bracket mount can be applied to all Ueevii wireless bridges. And for its length and firmness, the pole mount is also suitable for most of wireless bridges on the market, some AP can also use it.

CPE71C dialing wireless outdoor bridge is outdoor high power and high-performance 5.8G 300Mbps point to point CPE. The transmission speed between 2 wirelss WiFi bridges max is 300Mbps. The highest network speed that can be achieved max is 100Mbps. To achieve the CPE function, one needs to act as a receiver and the other one as a transmitter. | Ethernet WiFi bridge pairing can be done by dialing without having to access the GUI, avoid the complex setup program, save much human work and cost, make the long-range wireless coverage, data transmit and wireless monitoring simple and professional. 2-pack CPE has been pre-configured/complete the pairing, you do not need to pair again, if you need to change the parameters, you can dial to pair. | 3KM Transmission distance: 3 km (visible unobstructed environment), actual application distance should be less than 3KM. Built-in 14DBi directional antenna can significantly improve the transmission and reception performance of wireless signals. Trees will not block the transmission speed of the point to point internet wireless bridge, suitable for warehouses or garages next to your house. | Low Interference & Outdoor Waterproof: 5G frequency makes long range wireless bridge has better anti-interference performance, good compatibility, and strong anti-adjacent channel interference, better than 2.4 G traditional CPE; It can automatically adjust to the optimal transmission speed according to the actual signal strength and transmission distance. CPE71C network bridge is very suitable for outdoor use, with rain, dust, and antifreeze characteristics.

WHY CHOOSE UEEVII? 1. Professional wireless bridge brand, 2. Professional after-sales reply within 24 hours; 3. 1-year warranty replacement and lifetime technical support; 4. Sufficient inventory and continuous stock; 5. Low-end, mid-range, and high-end wireless bridges meet Your different needs; 6. Provide the most cost-effective network solution. | PLUG AND PLAY: CPE450 point to point wireless bridge is pre-configured point-to-point before leaving the factory, only need to connect other devices to the master bridge and the slave bridge respectively, and provide power. | 300MBPS TRANSFER SPEED: The transmission speed between 2 ethernet bridges can reach 300Mbps, the outdoor WiFi bridge has two built-in 10/100Mbps RJ45 ports to provide you with a wired speed of up to 100Mbps, just connect an access point/router to the slave bridge and broadcast WiFi Get a wireless network. | EASY TO PAIR: CPE450 Internet bridge is almost plug-and-play, dial pairing method allows you can easily set the master bridge and the slave bridge through the A-B button, then set the numbers of the 2 wireless bridges to be the same to pair by clicking the "RST" button. | EXTENDED NETWORK WiFi: One Master bridge has to be connected to the master router (that has internet) the second slave bridge has to be connected to the slave WIFI router you want the internet to, extend the network to your neighbor's house, store, barn, or garage through the point-to-point method, saving you money. And the network relay function can be realized through 2 pairs of wireless bridges. | EXTENDED SURVEILLANCE CAMERA:Deep protocol optimization for wireless video surveillance transmission to ensure high-speed video transmission and smooth video surveillance and the underlying wireless driver is optimized in-depth, with stronger anti-interference ability and better stability. Support point-to-point and point-to-multipoint to expand your monitoring range and ensure your property safety. | 3KM LONG DISTANCE:Automatic power adjustment to adapt to environmental changes, ensuring smooth video regardless of ultra-close distance, transmission distance up to 3km(Barrier-free), actual application distance should be less than 3KM, wireless bridges are installed face-to-face as much as possible, with a clear line of sight and no obstructions. | HIGH-PERFORMANCE ETHERNET BRIDGE:CPE450 building to building bridge is a 5.8G ong Range WiFi Extender Outdoor Wireless Bridge CPE with a digital Tube display. Point-to-point pairing can be done by dialing without having to access the GUI, avoiding the complex setup program, saving much human work and cost, and making the long-range wireless coverage, data transmission, and wireless monitoring simple and professional. Supports dynamic MIMO power saving mode (DMPS) and automatic power-saving transmission (APSD)， supports 24V POE power supply, is easy to install and deploy, simplifies construction, safe and reliable. | FCC ID CERTIFICATION ALLOWS: The FCC ID: 2A6EJ-CPE450, This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:(1)This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Accurate Operating Frequencies: The frequency range that complies with FCC Rule Parts 15E is 5180.1-5240.0 MHZ and 5745.0-5825.0 MHZ

2 installation methods: This wireless bridge bracket mount can be installed on a pole or wall-mounted, and you can choose to install it according to your needs, which is very convenient for you | 150-degree adjustment: The rod of the wireless bridge bracket mount can be adjusted up and down by 150°. After you install the CPE, adjust the angle of the rod to receive signals of different strengths | Firmness: Wireless bridge pole mount is designed with non-slip gears. After adjusting the angle of the rod, only need to twist it lightly, and the rod will be firmly fixed. And this pole mount is equipped with 2 hoops to firmly fix the mount on the rod | Waterproof: The surface of this pole mount is painted, and the top is equipped with a waterproof cap, which gives this bracket mount a good waterproof performance. It’s very suitable for outdoor use | Wide application: This wireless bracket mount can be applied to all Ueevii wireless bridges. And for its length and firmness, the pole mount is also suitable for most of wireless bridges on the market, some APs can also use it

Effortless Setup: CPE830 wireless bridge simplifies pairing method with easy-to-use dip switch pairing, eliminating the need for complex configuration(IP, channel, scan). No specialized networking knowledge is required - simply pair and use | High-Speed Transmission: Point to point wireless bridge outdoor utilizing advanced 5.8G 16dBi antenna transmission technology, our bridge delivers lightning-fast network speeds, easily get wired speeds ranging from 100Mbps to 1000Mbps | Adaptive Power Adjustment: Built-in 16dBm directional antenna with up to 27dBm power adjustment for a smooth connection across varying distances up to 3km (barrier-free) | Outdoor IP65 Level Weatherproof: Outdoor wireless bridge has excellent anti-high and low-temperature design, fully protects user network data in extreme environments, real-time, long-term, stable, and efficient transmission, enhances user experience | Save on Subscriptions and Wiring: Say goodbye to costly network subscription fees and the hassle of laying Ethernet cables. Ueevii wireless bridge provides a cost-effective solution for rapid network expansion without the need for additional wiring | Expand Network Wirelessly: Extend your WiFi network wirelessly to outbuildings such as barns, shops, and garages with outdoor point to point wireless bridge, effortlessly connecting remote areas to your main network hub,building to building wifi extender | Enhance Surveillance Coverage: Seamlessly extend the coverage of your surveillance cameras to areas like yards, driveways, warehouses, and farms with point to point outdoor wifi bridge, ensuring comprehensive monitoring and security | Maximized Reach with Starlink: Pair the CPE830 outdoor wifi bridge with your Starlink router for extended coverage to distant outbuildings, ensuring seamless connectivity across your property

High-Speed Transmission: Experience up to 1200Mbps between WiFi bridges and actual wired speeds up to 433Mbps by 1 gigabit port for seamless data transmission | Versatile Network Expansion: Effortlessly extend your network to an old house, barn, shop, or garage by point to point wireless bridge outdoor. Share the internet with neighbors or family members and save on subscription fees | Maximized Reach with Starlink: Pair the CPE820 outdoor wifi bridge with your Starlink router for extended coverage to distant outbuildings, ensuring seamless connectivity across your property | Effortless Surveillance Setup: Wifi bridge point to point outdoor wire connects IP cameras to monitor large areas such as lanes, yards, or farms. No need for complex wiring, saving you time and costs | Effortless Point-to-Point Pairing: Simplify your installation with dial-based point-to-point pairing-no GUI access required, and with a digital display for easy setup and monitoring | Flexible Networking Options: Supports point-to-point, point-to-multipoint, and flexible transmission/receiver switching, reducing setup complexity, and saving time and labor costs while achieving professional-grade long-range wireless coverage | Adaptive Power Adjustment: Built-in 16dBm directional antenna with up to 27dBm power adjustment for a smooth connection across varying distances up to 3km (barrier-free) | Advanced 5G Transmission: The CPE820 point to point wireless bridge operates on a 5G frequency with 15 channels, delivering higher speeds, stronger anti-interference, and longer-range coverage compared to 2.4G alternatives | Optimized Installation Requirements: With a built-in 14dBi high-gain directional antenna, the PTP wireless bridge requires a clear line of sight for optimal performance. Ensure face-to-face positioning for the best results | Weather-Resistant Design: The wifi ethernet bridge IP65-rated weatherproof casing ensures reliable operation in harsh outdoor environments, with protection against rain, dust, and freezing conditions

What can the UeeVii CPE453 long-range wireless bridge help you do? Extend your house network to the second building, such as garages, barns, shops, and even neighbors, without having to layout network cables, saving costs. Also suitable for surveillance cameras. | Cost-effective Hardware Configuration: Internet bridge adoption MTK's enterprise-class master chip, industrial-grade circuit design, supports IEEE802.11a/n/ac protocol and can provide stable wireless access speed and 10/100Mbps Ethernet exchange processing speed. | Outdoor IP65 Level Weatherproof: Outdoor wireless bridge has excellent anti-high and low-temperature design, fully protects user network data in the extreme environment, real-time, long-term, stable, and efficient transmission, enhance user experience. | 5.8G Powerful Wireless Transmission Capability: Built-in dual-polarized 14dBi high gain directional antenna and the circuit design with high power and high reception sensitivity greatly enhances the distance of wireless transmission and improves the performance and stability of wireless transmission. | Pairing Simple and Efficient: Point to point wireless bridge without the need for network professional knowledge, without computer operation, easy to dial code and adjust the main and slave devices' digital tube to the same value to complete point-to-point, point to multipoint (within 8 points) matching work.