ETHERNET PORT CONFIGURATION: 16 Gigabit RJ 45 ports provide high speed network connections to devices and a 32 Gbps switching capacity allows data traffic to flow smoothly, reducing traffic bottlenecks. | DESKTOP DESIGN: Compact and sturdy metal Ethernet desktop gigabit switch housing design is well suited for desktop installations. Its fanless design is perfect for quiet environments that require silent operation. | ENERGY SAVINGS: Embedded GREENnet technology provides cost savings and reduces power consumption by up to 70 percent, by limiting port power consumption during periods of low link utilization. | MOUNTING OPTIONS: Optional Rack Mount (sold separately) Rack mountable with ETH 11MK rack mount brackets. | PLUG AND PLAY: Simply power up the switch and plug in connected devices. No software to install or configuration needed. | LOW NOISE OPERATION: Fanless design lowers energy consumption and eliminates operating noise | TRENDnet LIFETIME PROTECTION: Lifetime TRENDnet Manufacturer Warranty

Ethernet port configuration 8 Gigabit RJ-45 ports provide high-speed network connections to devices and a 16Gbps switching capacity allows data traffic to flow smoothly reducing traffic bottlenecks | Desktop design with a compact and lightweight metal housing design this Ethernet Switch is well-suited for desktop installations Its fanless design is perfect for quiet environments that require silent operation | Energy savings The 8-Port Gigabit GREENnet switch model TEG-S82G Provides high bandwidth performance ease of use and reliability All while reducing power consumption by up to 70% GREENnet technology automatically adjusts power consumption as needed resulting in substantial energy savings Embedded GREENnet technology works right out of the box with no management requirement | Mounting options wall mountable | Plug-and-play easy setup simply power up the switch and plug in connected devices | Low-noise operation fanless design lowers energy consumption and eliminates operating noise | TRENDnet Lifetime protection lifetime TRENDnet manufacturer

HARDWARE INTERFACE: 1 x 10Gbps RJ-45 Ethernet port (Supported Speeds: 10Gbps / 5Gbps / 2.5Gbps / 1Gbps / 100Mbps), PCIe 3.0 x4 interface, LED indicators | PCI EXPRESS: This 10GbE PCIe card converts a PCIe 2.0 or 3.0 x4 slot into a 10G Ethernet Port | 10G PORT: 10G PCIe card adapter supports five speeds: 10Gbps, 5Gbps, 2.5Gbps, 1Gbps, and 100Mbps | 2.5/5GBASE-T SUPPORT: 2.5/5GBASE-T specification (802.3bz) supports 2.5G and 5G speeds over standard Cat5e cables at distances up to 100m | COMPATIBLE OPERATING SYSTEMS: The 10G adapter is compatible with Windows, Windows Server. Windows 10,8.1,8, Windows Server 2016,2012,2012 R2 | BRACKETS INCLUDED: The network adapter supports most installations and standard and low-profile brackets are included | COMPLIANT STANDARDS: IEEE 802.3u; IEEE 802.3ab; IEEE 802.3bz 2.5G/5GBASE-T; IEEE 802.3an 10GBASE-T; IEEE 802.1Q

10G SFP+: 10G SFP+ PCIe adapter provides one SFP+ slot for high speed 10 Gigabit fiber connectivity | CONVERT A PCle 2.0 x4 SLOT: The SPF adapter converts a free PCI Express slot into a 10 Gigabit SFP+ slot. | VLAN SUPPORT: IEEE 802.1Q tagged-based VLAN support | COMPATIBLE OPERATING SYSTEMS: The SFP+ adapter is compatible with Windows, Windows Server, and Linux operating systems. | JUMBO FRAME: The 10G SFP adapter sends larger packets, or jumbo frames (up to 16 KB), for increased performance | BRACKETS INCLUDED: The 10 gigabit network adapter supports most installations and comes with standard and low-profile brackets | ADDITIONAL SUPPORT: Microsoft Scalable Networking, Receive-side scaling (RSS), Message Signaled Interrupts (MSI), IP, TCP, and UDP checksum offloading, Minimize overhead with reduced host bus traffic and CPU utilization

2-IN-1 USB/VGA KVM CABLE: Consist of a USB keyboard/mouse cable and monitor cable bonded into a single device | MONITOR: VGA/SVGA HDB 15-pin Male to Male | KEYBOARD/MOUSE: USB 1.1 Type A | CONNECT COMPUTERS: This cable is designed to connect computers with VGA and USB ports to a TRENDnet TK-207K, TK-209K, TK-407K, TK-409K, TK-423K, TK-803R, TK-804R, TK-1603R or TK-1604R KVM Switch | LENGTH: This KVM cable is 6 feet (1.83 m)

CONTROL TWO COMPUTERS: This 2-port Dual monitor DisplayPort KVM 1. 2 KVM switch allows you to control two computers with one set of console controls and is designed for use with Dual DisplayPort systems. The KVM switch is designed to connect two DisplayPort monitors. [Recommended for use with DisplayPort monitors and graphic cards with DisplayPort] | 4K UHD RESOLUTION: This 2-port KVM switch enables you to experience up to 4K UHD resolutions 3840 x 2160 @ 60Hz and up to 2560 x 1440 @144 Hz | AUDIO SUPPORT: The dual monitor KVM switch provides full audio support with 3. 5mm Microphone and speaker jacks that maximize work station productivity | USB 2. 0 HUB: The KVM switch is designed with two additional USB ports to connect storage drives and printers between computers. | REQUIRED CABLING: We recommend using this KVM switch with 2 x TK-CP06 TRENDnet DisplayPort, USB, and Audio KVM Cable Kits (Sold Separately) + 2 x DisplayPort Cables | USB MOUSE & KEYBOARD: True Transparent USB (TTU) emulation technology supports most keyboard and mouse designs with the KVM switch. | KVM PORT INTERFACE: Keyboard/Mouse: USB Type B, Monitors: 2 x DisplayPort 1. 2, Speaker jack: 3. 5mm, Microphone jack: 3. 5mm | CONSOLE PORT CONNECTORS: Keyboard: USB Type A, Mouse: USB Type A, Monitors: 2 x DisplayPort 1. 2, 2-port USB 2. 0 Hub, Speaker jack: 3. 5mm, Microphone jack: 3. 5mm

Ethernet port configuration 5 Gigabit RJ-45 ports provide high-speed network connections to devices and a 10Gbps switching capacity allows data traffic to flow smoothly reducing traffic bottlenecks | Desktop design with a compact and lightweight metal housing design this Ethernet Switch is well-suited for desktop installations Its fanless design is perfect for quiet environments that require silent operation | Energy savings The 5-Port Gigabit GREENnet switch model TEG-S50G Provides high bandwidth performance ease of use and reliability All while reducing power consumption by up to 70% GREENnet technology automatically adjusts power consumption as needed resulting in substantial energy savings Embedded GREENnet technology works right out of the box with no management requirement | Mounting options wall mountable | Plug-and-play easy setup simply power up the switch and plug in connected devices | Low-noise operation fanless design lowers energy consumption and eliminates operating noise | TRENDnet Lifetime protection All metal TRENDnet switches are backed by our lifetime TRENDnet Manufacturer

Designed for Category 5e cabling | Certified for 100 MHz connection to 8 x Gigabit RJ-45 Ethernet ports | 10 inch wide patch panel is well suited for home and SMB applications | Includes cable management holders, tie, and port labels | Use with TRENDnet TC-PDT Punch Down Tool, B0000AZK4D | Use with TRENDnet TC-CT68 RJ-11/RJ-45 crimp/cut/strip tool, B0000AZK4G

UPGRADE YOUR WIFI PERFORMANCE: Upgrade your computer up to 1300 Mbps WiFi AC or 600 Mbps WiFi N to surf, game, and stream 4K HD video. | PRIOR TO INSTALLATION: Please ensure Windows is up to date, then follow the Quick Installation Guide to install the latest driver. | INCREASE YOUR WIFI COVERAGE: A high power radio with detachable high gain antennas increase WiFi coverage. 2.4 GHz / 5 GHz: 4 x 5 dBi (max.) dual band external / detachable. | BEAMFORMING: Beamforming increases real-time performance by directing stronger wireless signals to each device's specific location. | COMPATIBLE OPERATING SYSTEMS: The AC1900 router is compatible with Windows and Mac operating systems | TRENDnet PROTECTION: 3 Year TRENDnet Manufacturer’s Protection

DEVICE INTERFACE (Version 3.0R) : 1 x Gigabit Ethernet port and 1 x PoE Gigabit Ethernet port | POE POWER: This PoE injector supplies a PoE device with PoE (15.4W) power, and converts a non-PoE Gigabit port to a PoE Gigabit port. | POE DISTANCE: The Gigabit Power over Ethernet Injector provides a PoE network connection up to 100 meters (328 ft.) via an Ethernet cable with data + power. | POE DELIVERY: This injector converts a non-PoE Gigabit port to a PoE Gigabit port. Auto-sensing technology conveniently delivers the correct wattage needed to power your PoE devices | INSTALLATION FLEXIBILITY: TPE-113GI has a wall-mountable design that accommodates most installation scenarios. No configuration needed, simply connect a PoE network device | IEEE 802.3af compliant

GIGABIT PORTS: 1 x Gigabit Ethernet port and 1 x PoE+ Gigabit Ethernet port. Integrated power supply. | PoE POWER SUPPLY: This gigabit PoE+ injector supplies a PoE device with PoE (15.4W) or PoE+ (30W) power. | INSTALLATION FLEXIBILITY: This PoE+ injector has a wall-mountable design that accommodates most installations scenarios. | GIGABIT SPEEDS: Full Duplex 2Gbps Ethernet speeds with this PoE+ injector. | PoE DISTANCE: This Gigabit PoE Injector provides a PoE+ network connection up to 100 meters (328 ft.) | AUTO SENSING TECHNOLOGY: Auto-sensing technology delivers up to 30W to an 802.3at PoE+ device with backwards compatibility for 802.3af PoE (15.4W) devices.

ACCURATELY CHECK CABLES & PORTS: The comprehensive cable tester for network professionals allows you to accurately check pin configurations for Ethernet cables, USB cables (with TC-NTUF sold separately), BNC cables, and patch panel ports. | CABLE TESTING DISTANCE: Tests over cables lengths of up to 300 meters (984 ft.) | PIN TESTING: The network cable testers identifies proper, severed, short circuit, and cross connected pins. | LOCAL & REMOTE TESTING: A transmitter unit facilitates loop testing and a receiver unit allows for cable testing in locations away from the transmitter unit | TRANSMITTER INTERFACE: 2 x test ports, Manual test button, Auto test button, Power/tone switch, LED indicators. | RECEIVER INTERFACE: Test port, LED indicators | CONTINUOUS SCAN: Continuous scan mode is design to accommodate testing with cable ends in different locations | MANUAL SCAN: Manual scan is well suited for loop back cable testing | COMPATIBLE CABLES: Cat 7, 6, 6e, 6a, 5, 5e, 4, 3, 3e, Coax cable, USB and 1394 cable (with TC-NTUF). Not designed for live wires. Connecting tester to a live wire may damage the tester. | ALSO INCLUDED: 2x RJ-45-to-BNC Adapters, Network Patch Cable, Carry Pouch

EXPAND YOUR INTERNET NETWORK- TRENDnet’s Powerline 1300 AV2 Adapter Kit TPL-422E2K comes with two Powerline adapters to create a high-speed Powerline 1300 network using your home’s existing electrical system. Use up to 8 adapters on a single Powerline network. | HIGH-SPEED POWERLINE 1300- Powerline 1300 technology and a Gigabit port, deliver fast and stable networking to seamlessly connect computers, smart TVs, or other network enabled devices and stream 4K video. | SIMPLE INSTALLATION- No configuration needed – Simply plug in TRENDnet Powerline adapters, and they will auto-connect out of the box. | MIMO TECHNOLOGY-Multiple Input Multiple Output (MIMO) Powerline with Beamforming technology uses live, neutral, and ground wires to increase performance between adapters. | CROSS COMPATIBILITY & OPERATING SYSTEMS- Cross compatible with Powerline 1200, 600, 500, and 200 adapters. Compatible with Windows 10, 8.1, 8, 7, Vista, XP. | SET-UP INSTRUCTIONS-Plug in the first adapter and network it to your existing router. Plug in other adapters on the same electrical system and they auto-connect to the first adapter for instant internet access. Two Powerline adapters are required to start a network. | POWER CONSUMPTION: Input: 100 - 240V AC, 50-60Hz. Consumption: Active mode: 4W (max.); Standby mode: 0.5W (max.) Powerline communication is protected with 128-bit AES encryption | WARRANTY: TPL-422E2K is protected with a 3-Year TRENDnet Manufacturer’s Warranty

Power line 1300 networking over existing electrical lines. Power line range up to 300m (984 ft.) | Enhanced Power line performance and range from MIMO with Beamforming technology. The encrypted TRENDnet adapters are auto-connected out of the box | Built-in electrical outlet and gigabit port for high-speed connectivity | Enhanced Power line performance and range from MIMO with Beamforming technology. Also equipped with a power line noise filter minimizing interference from powered devices | Two Power line adapters are required to start a network. Cross compatible with Power line 1200, 600, 500, and 200 adapters

Includes two TPL-407E adapters | Powerline 500 networking | Never lose an electrical outlet with the built-in socket | Connects over electrical lines | Two adapters are needed to start a network | Compact form factor saves space | Easy Installation | Connectivity Technology: Ethernet

ADAPTERS: Includes two TPL-406E adapters. Two adapters are needed to start a network. Use up to 8 adapters to network devices in different rooms without running new cabling. | EXPAND YOUR NETWORK: Connect one adapter to your router and plug another adapter into an outlet on your electrical system for instant high-speed network access. | ETHERNET PORT: The Powerline 500 AV adapters have an Ethernet Port that extends high performance wired connections. Convenient Ethernet port that allows you to hardwire a computer, smart TV, or other network enabled device. | QUICK SETUP: Get up and running in minutes with the intuitive guided setup. Simply plug in the TRENDnet powerline Ethernet adapters! The encrypted Powerline signal auto-connects over an existing electrical system. Easy no-CD installation | SMALL PROFILE: The compact form factor of the powerline adapter kit stays off the ground by plugging directly into an outlet. | Powerline performance could be degraded if plugged into a power strip, GFCI outlets, and AFCI circuit breakers. Old circuit wiring in homes and devices that generate high amounts of electrical noise could also affect performance

INTERFACE: 1 x 10/100 Mbps Fast Ethernet Port, 1 x USB Type A Port (Male) | FASTER ETHERNET VIA USB: Connect your USB-enabled device at fast Ethernet speeds with this USB 2.0 to Fast Ethernet Adapter. | QUICKLY SHARE: Quickly share data, music, movies, and other network resources with this USB Ethernet adapter that allows you to easily connect to a 10/100 Mbps network from a USB enabled desktop, MacBook, ChromeBook, or notebook PC. | FAST ETHERNET SPEEDS: Experience Full Duplex 200 Mbps Ethernet speeds with this compact USB 2.0 to Fast Ethernet adapter. | COMPATABILITY: Compatible with Windows and Mac operating systems. | SIMPLE INSTALLATION: Easy setup and simple installation in minutes with the network adapter. | CONNECTOR LENGTH: Attached flexible 10.5 cm (4 in.) USB cable accommodates most installation scenarios | 2 YEAR PROTECTION: This USB 2.0 to 10/100 Fast Ethernet LAN Wired Network Adapter includes 2 Years of TRENDnet manufacturer protection

USB: The USB to serial adapter supports USB 1.1 and it is compatible with USB 2.0 and USB 3.0 ports. | RS-232 SERIAL CONNECTOR: Connect RS-232 serial devices, such as modems or printers, using the widely supported USB standard found in most laptops and desktops today. | SUPPORTED OPERATING SYSTEMS: The USB to serial converter adapter is compatible with Windows and Mac operating systems. Windows 10, 8.1, 8, 7. Mac OS 10.11, 10.10, 10.9, 10.8, 10.7, 10.6 | FLEXIBLE CABLE: Integrated and flexible 540mm (21 in.) USB 2.0 cable accommodates most installation scenarios. Total cable length of 25 inches when including the RS-232 (9pin) and USB Type A. | EASY SETUP: Simple installation in seconds of the USB to Serial 9-Pin Converter Cable. Insert the your computer

Mini-gbic slot accommodates multi (SX) or single-mode (LX) fiber modules | 100/1000baset-t auto-sensing/ negotiation Ethernet port | 100Base-fx/ 1000Base-SX/ LX mini-GBIC slot | Functions as a standalone converter or with the tfc-1600 fiber chassis | Lifetime TRENDnet manufacturer’s

Device Type - PCMCIA Card | Form Factor - N/A | Interface Type - Cardbus Type II | Dimensions WxDxH - 118 x 54 x 7 mm | Dimensions WxDxH - 118 x 54 x 7 mm

DEVICE INTERFACE: 1 x 10GBASE-T port (data); 1 x 10GBASE-T PoE+ port (data + power); Integrated Power Supply | POE++: The 10G PoE++ injector supplies a PoE device with PoE (15.4W), PoE+ (30W), or PoE++ (90W) power | EXPERIENCE 10G SPEEEDS: The PoE++ Injector converts a non-PoE port to a PoE++ 10G port over existing Cat6a or better cabling. | EASY INSTALLATION: Simply connect the 10G PoE++ injector to your network switch and PoE device - no configuration needed. | INSTALLATION FLEXIBILITY: The wall-mount design and a sturdy metal enclosure accommodates most installations scenarios. | NDAA / TAA compliant (U.S. and Canada only)

DEVICE INTERFACE: 1 x 10G/5G/2.5G/1G Ethernet Port; 1 x 10G/5G/2.5G/1G SFP+ Slot; LED Indicators | MULTI-GIG SLOT: 1 x 10G RJ-45 Port that supports 10G, 5G, 2.5G and 1G speeds. | MULTI-GIG SFP: 1 x 10Gbps SFP+ Slot that supports 10G, 5G, 2.5G and 1G speeds. | POWER ADAPTER: Included with this 10G SFP fiber media converter is a power adapter that allows for standalone use | COMPACT DESIGN: The small and compact design of the SFP+ to 10G RJ-45 adapter allows for greater installation flexibility. | FIBER WAVELENGTH: The SFP slot accommodates multimode or single-mode transmissions | COMPLIANCE: The SFP converter is NDAA/ TAA Compliant (U.S. and Canada Only)

DEVICE INTERFACE: 8 x 2.5GBASE-T ports (1Gbps/2.5Gbps); 2 x 10G SFP plus Slots; LED Indicators; Metal Housing | 2.5G PORTS: This 10 Port Multi-Gig Ethernet switch is equipped with eight 2.5GBASE-T RJ-45 ports that provide multi-gigabit speeds capable of up to 2.5Gbps over existing Cat5e or better cabling. | SFP plus SLOTS: The managed switch offers two 10G SFP plus slots for high-speed network connections providing a cost-effective solution in adding 10G link capability | EASY INSTALLATION: No configuration needed, simply connect network devices to the Gigabit Ethernet switch | SWITCHING CAPACITY: 80Gbps switching capacity | TRAFFIC MANAGEMENT: A broad range of network configurations are supported by: 802.3ad link aggregation, Asymmetric VLAN, 802.1Q VLAN, Voice VLAN, RSTP, MSTP, Loopback Detection, GVRP, 802.1p Class of Service (CoS), port bandwidth management, and QoS queue scheduling | WEB SMART MANAGEMENT: Provides an easy-to-use web-based GUI management for reduced switch configuration complexity and offers a combination of SMB management features for easy deployment. | ACCESS CONTROL: Features such as ACL, SSL, MAC/port filtering, 802.1X, TACACS plus , and RADIUS are compatible with layered access controls | COMPATABILITY: 2.5G ports are backwards compatible with 100/1000Mbps devices | INTEGRATION FLEXIBILITY: Managed features include access control lists, VLAN, IGMP snooping, QoS, RMON, SNMP trap, and syslog for monitoring and flexible network integration.; COMPLIANCE: IEEE 802.3bz (2.5G) compliant; IEEE 802.3ae (SFP plus ) compliant

5GHz WiFi AC867 point-to-point bridge kit | Includes two preconfigured TEW-840APBO access points | 14 dBi directional antennas | Supports Access Point, WDS Bridge, WDS Access Point, WDS Station, and Client Bridge modes | Proprietary PoE power adapters included | P56 outdoor weather rated housing | 1 x Gigabit PoE (in) port, and 1 x Gigabit port | NDAA / TAA compliant (U.S. and Canada only)

DEVICE INTERFACE: 16 x Gigabit RJ-45 ports; LED indicators | SWITCHING CAPACITY: This 16-port gigabit switch has a 32Gbps switching capacity with a forwarding rate of 23.8Mpps (64-byte packet size) | DATA TRANSFER RATE: Ethernet: 10 Mbps (half duplex); 20 Mbps (full duplex); Fast Ethernet: 100 Mbps (half duplex); 200 Mbps (full duplex);Gigabit: 2000 Mbps (full duplex) | DESKTOP DESIGN: Sturdy metal housing for greater installation flexibility and well-suited for desktop installations. Rackmount brackets are also included for easy installation with 1U rack installations | FANLESS DESIGN: The network switch fanless design lowers energy consumption and eliminates operating noise. | INTERNAL POWER SUPPLY: 100 - 240V AC, 50/60 Hz, 1A; Max. Consumption: 9.19W | TRENDnet LIFETIME PROTECTION: The TEG-S17D 16-Port Gigabit Desktop Switch is backed by TRENDnet’s Lifetime Manufacturer Protection. Renewed or refurbished products come with a 90 day Amazon Renewed Guarantee. | NDAA / TAA compliant (U.S. and Canada only)

PORTS: 1 x 2.5G port (data) and 1 x 2.5G PoE plus port (data plus power) | PoE plus : The 2.5G PoE plus injector supplies a PoE device with PoE (15.4W) or PoE plus (30W) power. | 2.5GBPS SPEEDS: Converts a non-PoE port to a PoE plus 2.5G port. Equipped with a 2.5GBASE-T RJ-45 port providing network speeds of up to 2.5Gbps over existing Cat5e or better cabling. | INSTALLATION FLEXIBILITY: Wall-mount design and a sturdy metal enclosure of the PoE plus injector accommodates most installations scenarios. | POE DISTANCE: The 2.5G injector provides a PoE plus network connection up to 100m (328 ft.) | AUTO SENSING TECHNOLOGY: Featuring auto-sensing technology, the 2.5G PoE plus injector conveniently delivers the correct wattage needed to power your PoE and PoE plus devices | Integrated Power Supply | IEEE 802.3af and 802.3at compliant | NDAA / TAA compliant (U.S. and Canada only)

DEVICE INTERFACE: 1 x 2.5GBASE-T port (2.5Gbps/1Gbps/100Mbps); 1 x USB 3.1 Gen 1 Type C connector; 1 x USB 3.1 Gen 1 Type C to Type A converter | NDAA + TAA COMPLIANT: With our NDAA and TAA compliant Ethernet Adapters, you can plan and install networking solutions that Government customers demand today (U.S. and Canada Only) | MANUFACTURER PROTECTION: We stand by the quality of our products.The TUC-ET2G 2.5G USB-C to RJ-45 Ethernet Adapter is backed and supported with 2 years of TRENDnet Manufacturer Protection. | RELIABLE TECH SUPPORT: Our team of advisors, support and tech experts are English speaking, and available for all your needs during normal business hours. We take pride in being there for our customers. | USB-C 3.1 CONNECTION: Use the USB-C to 2.5G Ethernet adapter to easily connect a USB-C 3.1 enabled notebook, or the included USB-C to USB-A adapter for desktop computers. | UPGRADE YOUR EXISTING ETHERNET PORT: A 2.5GBASE-T RJ-45 port provides a solution to upgrade to gigabit speeds of up to 2.5Gbps over existing Cat5e or better cabling, and is IEEE 802.3bz 2.5GBASE-T compliant | USB-C to USB-A CONVERTER INCLUDED: Included is a USB-C to USB-A adapter which allows users to connect the TUC-ET2G to a USB enabled notebook or desktop computer | INTEGRATED CABLE: The compact designed adapter has an integrated USB-C cable length of 14.2cm (5.59 in.) | COMPATABILITY: Windows 11, 10, 8.1, 7; MacOS 10.10 - 10.15; Supports 802.1p (CoS) and 802.1Q (VLAN) | USB-POWERED: The USB-C to 2.5G Ethernet adapter is conveniently powered via the USB port, no external power required.

2.5GB ETHERNET PORT: 2.5G network adapter supports three speeds: 2.5Gbps, 1Gbps, and 100Mbps over standard Cat5e cables at distances up to 100m (328 ft.) | NDAA + TAA COMPLIANT: With our NDAA and TAA compliant Network Adapters, you can plan and install networking solutions that Government customers demand today (U.S. and Canada Only) | MANUFACTURER PROTECTION: We stand by the quality of our products.The TEG-25GECTX 2.5GBase-T PCIe Network Adapter is backed and supported with 3 years of TRENDnet Manufacturer Protection. | RELIABLE TECH SUPPORT: Our team of advisors, support and tech experts are English speaking, and available for all your needs during normal business hours. We take pride in being there for our customers. | PCIe to 2.5G: This 2.5GBASE-T PCIe Network Adapter converts a PCIe 2.0 or later slot into a 2.5G Ethernet Port | COMPATIBLE OPERATING SYSTEMS: This network adapter is compatible with Windows, Windows Server operating system. | JUMBO FRAME: Sends larger packets, or jumbo frames (up to 9KB), for increased performance. | BRACKETS: Supports most installations with included standard and low-profile brackets | VLAN SUPPORT: 2.5G network adapter with IEEE 802.1Q tagged-based VLAN support | LED INDICATORS: LED indicators convey port status, link speed and activity

Gigabit ready rack mount 24-port panel | Cat6 patch panels deliver a steady 250Mhz connection to copper Gigabit switches | Ideal solution for Ethernet, Fast Ethernet and Gigabit applications | Use with TRENDnet TC-PDT Punch Down Tool, B0000AZK4D | Use with TRENDnet TC-CT68 RJ-11/RJ-45 crimp/cut/strip tool, B0000AZK4G | NDAA compliant (U.S. and Canada only)

2-IN-1 USB/VGA KVM CABLE: Consist of a USB keyboard/mouse cable and monitor cable bonded into a single device | MONITOR: VGA/SVGA HDB 15-pin Male to Male | KEYBOARD/MOUSE: USB 1.1 Type A | CONNECT COMPUTERS: This cable is designed to connect computers with VGA and USB ports to a TRENDnet TK-207K, TK-209K, TK-407K, TK-409K, TK-423K, TK-803R, TK-804R, TK-1603R or TK-1604R KVM Switch | LENGTH: This KVM cable is 10 feet (3.1 m)

2-port KVM switch with VGA and USB connections to computers | NDAA COMPLIANT: With our NDAA compliant KVM Switches, you can plan and install networking solutions that Government customers demand today (U.S. and Canada Only) | MANUFACTURER PROTECTION: We stand by the quality of our products.The TK-207K 2-Port USB KVM Switch and Cable Kit is backed and supported with 3 years of TRENDnet Manufacturer Protection. | RELIABLE TECH SUPPORT: Our team of advisors, support and tech experts are English speaking, and available for all your needs during normal business hours. We take pride in being there for our customers. | Included Cables: This KVM kit includes two sets of KVM cables; No CD installation required | Push Button Controls: Use the front panel push buttons to switch between computers. | VGA: Designed for VGA systems with resolutions up to 2048 x 1536 with a 60Hz refresh rate. | Device monitoring with Auto-Scan and audible feedback | Supports most operating systems and advanced mouse designs | Control two computers with one set of console controls; Bus powered - No external power adapter required

Ideal solution for Ethernet, Fast Ethernet and Gigabit applications | Gigabit ready rack mount 48-port panel | Cat6 patch panels deliver a steady 250Mhz connection to copper Gigabit switches | Ideal for Ethernet, Fast Ethernet and Copper Gigabit Ethernet (1000Base-T) network applications | Backward compatible with Cat. 3, 4, 5, 5e, and 6 cabling | Use with TRENDnet TC-PDT Punch Down Tool, B0000AZK4D | Use with TRENDnet TC-CT68 RJ-11/RJ-45 crimp/cut/strip tool, B0000AZK4G | NDAA compliant (U.S. and Canada only) | Ideal for Ethernet, Fast Ethernet and Copper Gigabit Ethernet (1000Base-T) network applications | Backward compatible with Cat. 3, 4, 5, 5e, and 6 cabling | Use with TRENDnet TC-PDT Punch Down Tool, B0000AZK4D | Use with TRENDnet TC-CT68 RJ-11/RJ-45 crimp/cut/strip tool, B0000AZK4G

DEVICE INTERFACE: 4 x Gigabit Ethernet Ports; 1 x SFP slot; LED indicators; Wall Mount | SWITCHING CAPACITY: This fanless unmanaged desktop switch offers a total switching capacity of 10 Gbps combined with the flexibility of fiber networking | REAR FACING PORTS: 4 x Gigabit Ethernet ports and 1 x SFP slot in the rear with LED indicators covey port status | TRAFFIC PRIORITIZATION: 802.1p QoS maintains your voice and video priority throughout the network | TRENDnet LIFETIME PROTECTION: All metal TRENDnet switches come with lifetime manufacturer protection | MOUNTING KIT: The gigabit switch comes with a magnet mounting kit for easy installation | JUMBO FRAME: Sends larger packets, or Jumbo Frames (up to 9 KB), for increased performance with this 4 Port Network Switch | NDAA / TAA compliant (U.S. and Canada only)

4-Port KVM switch with VGA and USB connections to computers | Device monitoring with Auto-Scan and audible feedback | High quality 2048 x 1536 resolution for a crisp display | Supports most operating systems and advanced mouse designs | All required cabling included | NDAA compliant (U.S. and Canada only)

DEVICE INTERFACE: 5 x 10G RJ-45 Ports (100Mbps/1Gbps/2.5Gbps/5Gbps/10Gbps); LED indicators. | 10G PORTS: This 5-Port 10G switch provides a cost-effective solution in adding 10G link capability with five 10G ports for high-speed connections over Cat6a cabling (or better). | MULTI-GIGABIT SUPPORT: This versatile unmanaged 10G switch also supports 2.5G/5G-BASE-T connections for faster speeds over your existing Cat5e cabling (or better). | SWITCHING CAPACITY: The 10G switch has a 100Gbps switching capacity. | TRENDNET LIFETIME PROTECTION: The TEG-S750 switch comes with Lifetime TRENDnet protection. | FANLESS DESIGN: Fanless design lowers energy consumption and eliminates noise for silent operation. | Supports IEEE 802.3bz 2.5G/5G-BASE-T over cat5e cabling (or better). | Supports IEEE 802.3an 10G-BASE-T over cat6a cabling (or better). | NDAA / TAA compliant (U.S. and Canada only)

DEVICE INTERFACE: 5 x Gigabit RJ-45 ports; LED indicators | LIFETIME PROTECTION -We stand by the quality of our products. The 5-Port Gigabit Desktop Switch, TEG-S51 is secured with Lifetime Manufacturer Protection from TRENDnet. (U.S. and Canada Only) | NDAA + TAA COMPLIANT: With our NDAA and TAA compliant network switches, you can plan and install networking solutions that Government customers demand today (U.S. and Canada Only) | RELIABLE TECH SUPPORT: Our team of advisors, support and tech experts are English speaking, and available for all your needs during normal business hours. We take pride in being there for our customers. | SWITCHING CAPACITY: This 5-port gigabit switch has a 10Gbps switching capacity with a forwarding rate of 7.44Mpps (64-byte packet size) | DATA TRANSFER RATE: Ethernet: 10 Mbps (half duplex); 20 Mbps (full duplex); Fast Ethernet: 100 Mbps (half duplex); 200 Mbps (full duplex);Gigabit: 2000 Mbps (full duplex) | COMPACT DESKTOP DESIGN: Sturdy lightweight metal housing is well-suited for desktop installations. | FANLESS DESIGN: The network swich fanless design lowers energy consumption and eliminates operating noise.

DEVICE INTERFACE: 4 x Gigabit PoE+ ports; 1 x Gigabit port; LED indicators | POE+ POWER BUDGET & SWITCH CAPACITY: 32 W PoE power budget supports up to 4 power over Ethernet devices and the 5-port gigabit PoE+ network switch provides 10Gbps switching capacity to support edge network installations | COMPACT FANLESS DESIGN: With a compact and lightweight rugged metal housing design, this desktop switch is well-suited for desktop installations. Its fanless design is ideal for quiet environments that require silent operation | DATA TRANSFER RATE: Ethernet: 10 Mbps (half duplex), 20 Mbps (full duplex), Fast Ethernet: 100 Mbps (half duplex), 200 Mbps (full duplex), Gigabit: 2000 Mbps (full duplex) | OPERATING TEMPERATURE: This 5-port gigabit PoE+ network switch is rated with an operating temperature range of 0° - 40° C (32° - 104° F) | IEEE and DSCP: IEEE 802.1p QoS and DSCP pass-through support | TRENDnet LIFETIME PROTECTION: The TPE-TG52 5-Port Gigabit PoE+ Switch is backed by TRENDnet’s Lifetime Manufacturer Protection. Renewed or refurbished products come with a 90 day Amazon Renewed Guarantee. | NDAA / TAA compliant (U.S. and Canada only)

Ethernet port interface: 5 x fast Ethernet ports | Switching capacity: The network switch allows for a 1Gbps switching capacity. | Din-rail & Wall mount kit: This 5-port Fast Ethernet Switch comes with an integrated DIN-rail mount and mounting hardware. | Extreme temperature Switch: the metal hardened IP30 rated network switch is equipped with a rugged IP30 rated enclosure and designed to withstand a high degree of vibration, shock, while operating with a wide temperature range (- 40 - 75 °C (- 40 - 167 °F) For harsh environments. | Redundant power: the 5 port switch feature Dual power inputs to provide redundant power with overload current protection | Power supply sold separately: The power supply for this 5 port DIN-rail Ethernet Switch is sold separately (model: TI-M6024) | TRENDnet Lifetime protection: All metal TRENDnet switches are backed by our lifetime TRENDnet manufacturer Protection | NDAA / TAA compliant (U.S. and Canada only)

DEVICE INTERFACE: 5 x 2.5GBASE-T ports (1Gbps/ 2.5Gbps); LED indicators | 2.5G PORTS: The 5 Port network switch is equipped with 2.5GBASE-T RJ-45 ports that provide higher gigabit speeds capable of up to 2.5Gbps over existing Cat5e or better cabling | SWITCHING CAPACITY: The unmanaged switch is equipped with a 25Gbps Switching Capacity | COMPATABILITY: The 5 Port Ethernet switch is backwards compatible with 10/100/1000Mbps devices. | WALL MOUNTABLE: The 2.5G unmanaged switch features a durable metal housing with a convenient wall mountable design for greater installation flexibility. | FANLESS DESIGN: The fanless design lowers energy consumption and eliminates distracting operating noise. | IEEE STANDARD: IEEE 802.3bz (2.5G) Compliant | TRENDnet LIFETIME PROTECTION: The TEG-S350 5-Port Unmanaged 2.5G Switch is backed with a Lifetime Manufacturer Protection

GIGABIT PORTS 4 x gigabit ports (data in) and 4 x gigabit PoE ports (data + PoE out) | NDAA + TAA COMPLIANT: With our NDAA and TAA compliant Injectors, you can plan and install networking solutions that Government customers demand today (U.S. and Canada Only) | MANUFACTURER PROTECTION: We stand by the quality of our products.The TPE-147GI 65W 4-Port Gigabit PoE+ Injector is backed and supported with 3 years of TRENDnet Manufacturer Protection. | RELIABLE TECH SUPPORT: Our team of advisors, support and tech experts are English speaking, and available for all your needs during normal business hours. We take pride in being there for our customers. | EASY INSTALLATION No configuration needed simply connect a PoE network devices to this 4-port PoE+ injector | 4-PORT POE TRENDnet’s 65W 4-Port Gigabit PoE+ Injector supplies up to 30W of power to four PoE (IEEE 802 3af) or PoE+ (IEEE 802 3at) devices at industry PoE standards for greater device interoperability | POE DISTANCE The multi-port gigabit PoE+ injector provides four PoE network connections up to 100m (328 ft ) away from the 4-port PoE injector | FANLESS DISTANCE The fanless design of the gigabit PoE+ Injector eliminates operating noise and lowers energy consumption