COVERAGE: Completely covers the console area and the space between each front seat. (main Pet Net area is 50" wide (44" tall). * 44 inches too tall? Adjust the height down by flexing the curve down against your roof ... OR you can drop the curve completely after removing the rod. * 50 inches too wide? Adjust the width using the spare top/bottom grommets! | CURVED TOP - (Optional): You can choose to have the curve raised, or let it hang down, depending on your visibility requirements. In smaller vehicles, the curve reaches all the way to the ceiling. It is very flexible and will bend slightly to conform to the shape of your roof... also helping it to stay in position. If you choose to let the curve hang down, remove the fiberglass rod and place the extra netting between the seat and the netting to keep it secure. | SIDE (Door Pillar) HANDLES: If you have a mini-van, or SUV, this may be your only option to secure the top corners. The same three "hook" bungee cord configurations mentioned above work with side handles. Additionally ... you can also place one hook onto the headrest vertical metal support bar, rather than both in the grommet, if you need more tension. | BOTTOM CORNERS - can be secured to the seat belt housing by the floor (wrap the bungee), or hooked or wrapped around the front seat frame near the floor. | MATERIAL: Flexible heavy-duty nylon is claw-resistant | WASHING: Hand Wash & Hang to Dry. TOOLS: None Required NOTE: Please make sure there are overhead or side pillar handles in your vehicle to attach the hooks before you place your order