COMPATIBILITY- Tensea rear camera screen protector made by 9H tempered glass is designed for iPhone13 Pro 6.1 inch and iPhone 13 ProMax 6.7 inch 2021 with three camera. No bubbles, Case friendly, leave no residue after removed. [Note: Not fit for iPhone 13 mini 5.4 inch/iPhone 13 6.1 inch with two camera] | FULL PROTECTION- The 9H tempered glass camera lens protective film protects your i Phone 13 Pro /13 Pro Max from scratches, dust and abrasion. Secure protection resist shock, drop off or big impact towards your camera and keeps you peaceful. | NIGHT CIRCLE- The special designed night circle around flash will keep your camera perform better under low light circumstances. No residue, No fog, No blue light is caused when using flash. | HIGHLY CLEAR- The 9H tempered glass is highly transparent. No influence to Apple Phone 13 Pro/13 Pro Max original amazing image performance. | EASY INSTALLATION- Easy to install after cleaning. 3 packs are very cost-effective. All our products have limited one-year after-sale service. So if there are any problems with it, please contact us without hesitation.

【COMPATIBILITY】The Tensea watch case is tailored to fit Apple Watch SE 2 & SE Series 6/5/4 40mm perfectly. Bumper cover built in screen Ultratector give nice snug fit. NOTE: Not compatible with Apple Watch Ultra 49mm, i Watch Series 8/7 41mm 45mm, Apple Watch SE 2022 44mm, SE Series 6/5/4 44mm, Series 3/2/1 38mm 42mm. | 【DAILY WATERPROOF】The built-in seal ring keeps water away from screen, which means you no longer need to remove case repeatedly and wipe water. It is waterproof perfectly for daily wear - showering, hand washing, sweating, rain, etc. The oleophobic coating on the surface of tempered glass will not cause water to collect on the glass. [NOTE: Not suitable for deep waterproofing, such as diving and swimming, etc.] | 【360° PROTECTION】This compatible iWatch 40mm face cover which can all around protect the front and back of your watch from dust, dirt, scratches and damages. These 9H tempered glass screen protector don’t affect the touch sensitivity. The sweatproof watch case is easy to install without removing the band. | 【UPGRADED MATERIAL】The anti-scratch tempered glass is 9 grade hardness. The shock-absorbing PC material is more hard, tougher and protective than traditional TPU. Glass can prevent fogging caused by the difference in temperature between cold and hot. | 【Easy Installation】There is installation video on our product page and instruction is included in the package.【Easy Removal】- A removal tool is included to remove the case without damaging the watch.【What You Get】1 x 40mm Apple Watch front case, 1 x back cover, 1 x removal tool, 1 x cleaning tool. ( Smart watch, band and charger are not included ) All our products have limited one-year after-sale service. So if there are any problems with it, please contact us without hesitation.

【COMPATIBILITY】The Tensea watch case is tailored to fit Apple Watch SE 2 & SE Series 6/5/4 40mm perfectly. Bumper cover built in screen Ultratector give nice snug fit. NOTE: Not compatible with Apple Watch Ultra 49mm, i Watch Series 8/7 41mm 45mm, Apple Watch SE 2022 44mm, SE Series 6/5/4 44mm, Series 3/2/1 38mm 42mm. | 【DAILY WATERPROOF】The built-in seal ring keeps water away from screen, which means you no longer need to remove case repeatedly and wipe water. It is waterproof perfectly for daily wear - showering, hand washing, sweating, rain, etc. The oleophobic coating on the surface of tempered glass will not cause water to collect on the glass. [NOTE: Not suitable for deep waterproofing, such as diving and swimming, etc.] | 【360° PROTECTION】This compatible iWatch 40mm face cover which can all around protect the front and back of your watch from dust, dirt, scratches and damages. These 9H tempered glass screen protector don’t affect the touch sensitivity. The sweatproof watch case is easy to install without removing the band. | 【UPGRADED MATERIAL】The anti-scratch tempered glass is 9 grade hardness. The shock-absorbing PC material is more hard, tougher and protective than traditional TPU. Glass can prevent fogging caused by the difference in temperature between cold and hot. | 【Easy Installation】There is installation video on our product page and instruction is included in the package.【Easy Removal】- A removal tool is included to remove the case without damaging the watch.【What You Get】1 x 40mm Apple Watch front case, 1 x back cover, 1 x removal tool, 1 x cleaning tool. ( Smart watch, band and charger are not included ) All our products have limited one-year after-sale service. So if there are any problems with it, please contact us without hesitation.

【COMPATIBILITY】The Tensea watch case is tailored to fit Apple Watch SE 2 & SE Series 6/5/4 40mm perfectly. Bumper cover built in screen Ultratector give nice snug fit. NOTE: Not compatible with Apple Watch Ultra 49mm, i Watch Series 8/7 41mm 45mm, Apple Watch SE 2022 44mm, SE Series 6/5/4 44mm, Series 3/2/1 38mm 42mm. | 【DAILY WATERPROOF】The built-in seal ring keeps water away from screen, which means you no longer need to remove case repeatedly and wipe water. It is waterproof perfectly for daily wear - showering, hand washing, sweating, rain, etc. The oleophobic coating on the surface of tempered glass will not cause water to collect on the glass. [NOTE: Not suitable for deep waterproofing, such as diving and swimming, etc.] | 【360° PROTECTION】This compatible iWatch 40mm face cover which can all around protect the front and back of your watch from dust, dirt, scratches and damages. These 9H tempered glass screen protector don’t affect the touch sensitivity. The sweatproof watch case is easy to install without removing the band. | 【UPGRADED MATERIAL】The anti-scratch tempered glass is 9 grade hardness. The shock-absorbing PC material is more hard, tougher and protective than traditional TPU. Glass can prevent fogging caused by the difference in temperature between cold and hot. | 【Easy Installation】There is installation video on our product page and instruction is included in the package.【Easy Removal】- A removal tool is included to remove the case without damaging the watch.【What You Get】1 x 40mm Apple Watch front case, 1 x back cover, 1 x removal tool, 1 x cleaning tool. ( Smart watch, band and charger are not included ) All our products have limited one-year after-sale service. So if there are any problems with it, please contact us without hesitation.

【COMPATIBILITY】The Tensea watch case is tailored to fit Apple Watch SE 2 & SE Series 6/5/4 40mm perfectly. Bumper cover built in screen Ultratector give nice snug fit. NOTE: Not compatible with Apple Watch Ultra 49mm, i Watch Series 8/7 41mm 45mm, Apple Watch SE 2022 44mm, SE Series 6/5/4 44mm, Series 3/2/1 38mm 42mm. | 【DAILY WATERPROOF】The built-in seal ring keeps water away from screen, which means you no longer need to remove case repeatedly and wipe water. It is waterproof perfectly for daily wear - showering, hand washing, sweating, rain, etc. The oleophobic coating on the surface of tempered glass will not cause water to collect on the glass. [NOTE: Not suitable for deep waterproofing, such as diving and swimming, etc.] | 【360° PROTECTION】This compatible iWatch 40mm face cover which can all around protect the front and back of your watch from dust, dirt, scratches and damages. These 9H tempered glass screen protector don’t affect the touch sensitivity. The sweatproof watch case is easy to install without removing the band. | 【UPGRADED MATERIAL】The anti-scratch tempered glass is 9 grade hardness. The shock-absorbing PC material is more hard, tougher and protective than traditional TPU. Glass can prevent fogging caused by the difference in temperature between cold and hot. | 【Easy Installation】There is installation video on our product page and instruction is included in the package.【Easy Removal】- A removal tool is included to remove the case without damaging the watch.【What You Get】1 x 40mm Apple Watch front case, 1 x back cover, 1 x removal tool, 1 x cleaning tool. ( Smart watch, band and charger are not included ) All our products have limited one-year after-sale service. So if there are any problems with it, please contact us without hesitation.

【COMPATIBILITY】The Tensea watch case is tailored to fit Apple Watch SE 2 & SE Series 6/5/4 40mm perfectly. Bumper cover built in screen Ultratector give nice snug fit. NOTE: Not compatible with Apple Watch Ultra 49mm, i Watch Series 8/7 41mm 45mm, Apple Watch SE 2022 44mm, SE Series 6/5/4 44mm, Series 3/2/1 38mm 42mm. | 【DAILY WATERPROOF】The built-in seal ring keeps water away from screen, which means you no longer need to remove case repeatedly and wipe water. It is waterproof perfectly for daily wear - showering, hand washing, sweating, rain, etc. The oleophobic coating on the surface of tempered glass will not cause water to collect on the glass. [NOTE: Not suitable for deep waterproofing, such as diving and swimming, etc.] | 【360° PROTECTION】This compatible iWatch 40mm face cover which can all around protect the front and back of your watch from dust, dirt, scratches and damages. These 9H tempered glass screen protector don’t affect the touch sensitivity. The sweatproof watch case is easy to install without removing the band. | 【UPGRADED MATERIAL】The anti-scratch tempered glass is 9 grade hardness. The shock-absorbing PC material is more hard, tougher and protective than traditional TPU. Glass can prevent fogging caused by the difference in temperature between cold and hot. | 【Easy Installation】There is installation video on our product page and instruction is included in the package.【Easy Removal】- A removal tool is included to remove the case without damaging the watch.【What You Get】1 x 40mm Apple Watch front case, 1 x back cover, 1 x removal tool, 1 x cleaning tool. ( Smart watch, band and charger are not included ) All our products have limited one-year after-sale service. So if there are any problems with it, please contact us without hesitation.

【COMPATIBILITY】The Tensea watch case is tailored to fit Apple Watch SE 2 & SE Series 6/5/4 44mm perfectly. Bumper cover built in screen Ultratector give nice snug fit. NOTE: Not compatible with Apple Watch Ultra 49mm, i Watch Series 8/7 41mm 45mm, Apple Watch SE 2022 40mm, SE Series 6/5/4 40mm, Series 3/2/1 38mm 42mm. | 【DAILY WATERPROOF】The built-in seal ring keeps water away from screen, which means you no longer need to remove case repeatedly and wipe water. It is waterproof perfectly for daily wear - showering, hand washing, sweating, rain, etc. The oleophobic coating on the surface of tempered glass will not cause water to collect on the glass. [NOTE: Not suitable for deep waterproofing, such as diving and swimming, etc.] | 【360° PROTECTION】This compatible iWatch 44mm face cover which can all around protect the front and back of your watch from dust, dirt, scratches and damages. These 9H tempered glass screen protector don’t affect the touch sensitivity. The sweatproof watch case is easy to install without removing the band. | 【UPGRADED MATERIAL】The anti-scratch tempered glass is 9 grade hardness. The shock-absorbing PC material is more hard, tougher and protective than traditional TPU. Glass can prevent fogging caused by the difference in temperature between cold and hot. | 【Easy Installation】There is installation video on our product page and instruction is included in the package.【Easy Removal】- A removal tool is included to remove the case without damaging the watch.【What You Get】1 x 44mm Apple Watch front case, 1 x back cover, 1 x removal tool, 1 x cleaning tool. ( Smart watch, band and charger are not included ) All our products have limited one-year after-sale service. So if there are any problems with it, please contact us without hesitation.

【COMPATIBILITY】The Tensea watch case is tailored to fit Apple Watch SE 2 & SE Series 6/5/4 44mm perfectly. Bumper cover built in screen Ultratector give nice snug fit. NOTE: Not compatible with Apple Watch Ultra 49mm, i Watch Series 8/7 41mm 45mm, Apple Watch SE 2022 40mm, SE Series 6/5/4 40mm, Series 3/2/1 38mm 42mm. | 【DAILY WATERPROOF】The built-in seal ring keeps water away from screen, which means you no longer need to remove case repeatedly and wipe water. It is waterproof perfectly for daily wear - showering, hand washing, sweating, rain, etc. The oleophobic coating on the surface of tempered glass will not cause water to collect on the glass. [NOTE: Not suitable for deep waterproofing, such as diving and swimming, etc.] | 【360° PROTECTION】This compatible iWatch 44mm face cover which can all around protect the front and back of your watch from dust, dirt, scratches and damages. These 9H tempered glass screen protector don’t affect the touch sensitivity. The sweatproof watch case is easy to install without removing the band. | 【UPGRADED MATERIAL】The anti-scratch tempered glass is 9 grade hardness. The shock-absorbing PC material is more hard, tougher and protective than traditional TPU. Glass can prevent fogging caused by the difference in temperature between cold and hot. | 【Easy Installation】There is installation video on our product page and instruction is included in the package.【Easy Removal】- A removal tool is included to remove the case without damaging the watch.【What You Get】1 x 44mm Apple Watch front case, 1 x back cover, 1 x removal tool, 1 x cleaning tool. ( Smart watch, band and charger are not included ) All our products have limited one-year after-sale service. So if there are any problems with it, please contact us without hesitation.

【COMPATIBILITY】The Tensea watch case is tailored to fit Apple Watch SE 2 & SE Series 6/5/4 44mm perfectly. Bumper cover built in screen Ultratector give nice snug fit. NOTE: Not compatible with Apple Watch Ultra 49mm, i Watch Series 8/7 41mm 45mm, Apple Watch SE 2022 40mm, SE Series 6/5/4 40mm, Series 3/2/1 38mm 42mm. | 【DAILY WATERPROOF】The built-in seal ring keeps water away from screen, which means you no longer need to remove case repeatedly and wipe water. It is waterproof perfectly for daily wear - showering, hand washing, sweating, rain, etc. The oleophobic coating on the surface of tempered glass will not cause water to collect on the glass. [NOTE: Not suitable for deep waterproofing, such as diving and swimming, etc.] | 【360° PROTECTION】This compatible iWatch 44mm face cover which can all around protect the front and back of your watch from dust, dirt, scratches and damages. These 9H tempered glass screen protector don’t affect the touch sensitivity. The sweatproof watch case is easy to install without removing the band. | 【UPGRADED MATERIAL】The anti-scratch tempered glass is 9 grade hardness. The shock-absorbing PC material is more hard, tougher and protective than traditional TPU. Glass can prevent fogging caused by the difference in temperature between cold and hot. | 【Easy Installation】There is installation video on our product page and instruction is included in the package.【Easy Removal】- A removal tool is included to remove the case without damaging the watch.【What You Get】1 x 44mm Apple Watch front case, 1 x back cover, 1 x removal tool, 1 x cleaning tool. ( Smart watch, band and charger are not included ) All our products have limited one-year after-sale service. So if there are any problems with it, please contact us without hesitation.

【COMPATIBILITY】The Tensea watch case is tailored to fit Apple Watch SE 2 & SE Series 6/5/4 44mm perfectly. Bumper cover built in screen Ultratector give nice snug fit. NOTE: Not compatible with Apple Watch Ultra 49mm, i Watch Series 8/7 41mm 45mm, Apple Watch SE 2022 40mm, SE Series 6/5/4 40mm, Series 3/2/1 38mm 42mm. | 【DAILY WATERPROOF】The built-in seal ring keeps water away from screen, which means you no longer need to remove case repeatedly and wipe water. It is waterproof perfectly for daily wear - showering, hand washing, sweating, rain, etc. The oleophobic coating on the surface of tempered glass will not cause water to collect on the glass. [NOTE: Not suitable for deep waterproofing, such as diving and swimming, etc.] | 【360° PROTECTION】This compatible iWatch 44mm face cover which can all around protect the front and back of your watch from dust, dirt, scratches and damages. These 9H tempered glass screen protector don’t affect the touch sensitivity. The sweatproof watch case is easy to install without removing the band. | 【UPGRADED MATERIAL】The anti-scratch tempered glass is 9 grade hardness. The shock-absorbing PC material is more hard, tougher and protective than traditional TPU. Glass can prevent fogging caused by the difference in temperature between cold and hot. | 【Easy Installation】There is installation video on our product page and instruction is included in the package.【Easy Removal】- A removal tool is included to remove the case without damaging the watch.【What You Get】1 x 44mm Apple Watch front case, 1 x back cover, 1 x removal tool, 1 x cleaning tool. ( Smart watch, band and charger are not included ) All our products have limited one-year after-sale service. So if there are any problems with it, please contact us without hesitation.

【COMPATIBILITY】The Tensea watch case is tailored to fit Apple Watch SE 2 & SE Series 6/5/4 44mm perfectly. Bumper cover built in screen Ultratector give nice snug fit. NOTE: Not compatible with Apple Watch Ultra 49mm, i Watch Series 8/7 41mm 45mm, Apple Watch SE 2022 40mm, SE Series 6/5/4 40mm, Series 3/2/1 38mm 42mm. | 【DAILY WATERPROOF】The built-in seal ring keeps water away from screen, which means you no longer need to remove case repeatedly and wipe water. It is waterproof perfectly for daily wear - showering, hand washing, sweating, rain, etc. The oleophobic coating on the surface of tempered glass will not cause water to collect on the glass. [NOTE: Not suitable for deep waterproofing, such as diving and swimming, etc.] | 【360° PROTECTION】This compatible iWatch 44mm face cover which can all around protect the front and back of your watch from dust, dirt, scratches and damages. These 9H tempered glass screen protector don’t affect the touch sensitivity. The sweatproof watch case is easy to install without removing the band. | 【UPGRADED MATERIAL】The anti-scratch tempered glass is 9 grade hardness. The shock-absorbing PC material is more hard, tougher and protective than traditional TPU. Glass can prevent fogging caused by the difference in temperature between cold and hot. | 【Easy Installation】There is installation video on our product page and instruction is included in the package.【Easy Removal】- A removal tool is included to remove the case without damaging the watch.【What You Get】1 x 44mm Apple Watch front case, 1 x back cover, 1 x removal tool, 1 x cleaning tool. ( Smart watch, band and charger are not included ) All our products have limited one-year after-sale service. So if there are any problems with it, please contact us without hesitation.

【COMPATIBILITY】The Tensea iWatch face guard with back cover is tailored to fit Apple Watch Series 7/8 41mm perfectly. Bumper cover built in screen protector give nice snug fit. NOTE: Not compatible with i Watch Series 8 45mm, Series 7 45mm, (Choose the other size variation), Series 3/2/1 38mm 42mm, SE Series 6/5/4 40mm 44mm, Apple Watch SE 2022 40mm 44mm, Apple Watch Ultra 49mm. | 【DAILY WATERPROOF】The built-in seal ring keeps water away from screen, which means you no longer need to remove case repeatedly and wipe water. It is waterproof perfectly for daily wear - showering, hand washing, sweating, rain, etc. The oleophobic coating on the surface of tempered glass will not cause water to collect on the glass. [NOTE: Not suitable for deep waterproofing, such as diving and swimming, etc.] | 【360° PROTECTION】This compatible iWatch 41mm face cover which can all around protect the front and back of your watch from dust, dirt, scratches and damages. These 9H tempered glass screen protector don’t affect the touch sensitivity. The sweatproof watch case is easy to install without removing the band. | 【UPGRADED MATERIAL】The anti-scratch tempered glass is 9 grade hardness. The shock-absorbing PC material is more hard, tougher and protective than traditional TPU. Glass can prevent fogging caused by the difference in temperature between cold and hot. | 【Easy Installation】There is installation video on our product page and instruction is included in the package.【Easy Removal】- A removal tool is included to remove the case without damaging the watch.【What You Get】1 x 41mm Apple Watch front case, 1 x back cover, 1 x removal tool, 1 x cleaning tool. ( Smart watch, band and charger are not included ) All our products have limited one-year after-sale service. So if there are any problems with it, please contact us without hesitation.

【COMPATIBILITY】The Tensea iWatch face guard with back cover is tailored to fit Apple Watch Series 7/8 41mm perfectly. Bumper cover built in screen protector give nice snug fit. NOTE: Not compatible with i Watch Series 8 45mm, Series 7 45mm, (Choose the other size variation), Series 3/2/1 38mm 42mm, SE Series 6/5/4 40mm 44mm, Apple Watch SE 2022 40mm 44mm, Apple Watch Ultra 49mm. | 【DAILY WATERPROOF】The built-in seal ring keeps water away from screen, which means you no longer need to remove case repeatedly and wipe water. It is waterproof perfectly for daily wear - showering, hand washing, sweating, rain, etc. The oleophobic coating on the surface of tempered glass will not cause water to collect on the glass. [NOTE: Not suitable for deep waterproofing, such as diving and swimming, etc.] | 【360° PROTECTION】This compatible iWatch 41mm face cover which can all around protect the front and back of your watch from dust, dirt, scratches and damages. These 9H tempered glass screen protector don’t affect the touch sensitivity. The sweatproof watch case is easy to install without removing the band. | 【UPGRADED MATERIAL】The anti-scratch tempered glass is 9 grade hardness. The shock-absorbing PC material is more hard, tougher and protective than traditional TPU. Glass can prevent fogging caused by the difference in temperature between cold and hot. | 【Easy Installation】There is installation video on our product page and instruction is included in the package.【Easy Removal】- A removal tool is included to remove the case without damaging the watch.【What You Get】1 x 41mm Apple Watch front case, 1 x back cover, 1 x removal tool, 1 x cleaning tool. ( Smart watch, band and charger are not included ) All our products have limited one-year after-sale service. So if there are any problems with it, please contact us without hesitation.

【COMPATIBILITY】The Tensea iWatch face guard with back cover is tailored to fit Apple Watch Series 7/8 41mm perfectly. Bumper cover built in screen protector give nice snug fit. NOTE: Not compatible with i Watch Series 8 45mm, Series 7 45mm, (Choose the other size variation), Series 3/2/1 38mm 42mm, SE Series 6/5/4 40mm 44mm, Apple Watch SE 2022 40mm 44mm, Apple Watch Ultra 49mm. | 【DAILY WATERPROOF】The built-in seal ring keeps water away from screen, which means you no longer need to remove case repeatedly and wipe water. It is waterproof perfectly for daily wear - showering, hand washing, sweating, rain, etc. The oleophobic coating on the surface of tempered glass will not cause water to collect on the glass. [NOTE: Not suitable for deep waterproofing, such as diving and swimming, etc.] | 【360° PROTECTION】This compatible iWatch 41mm face cover which can all around protect the front and back of your watch from dust, dirt, scratches and damages. These 9H tempered glass screen protector don’t affect the touch sensitivity. The sweatproof watch case is easy to install without removing the band. | 【UPGRADED MATERIAL】The anti-scratch tempered glass is 9 grade hardness. The shock-absorbing PC material is more hard, tougher and protective than traditional TPU. Glass can prevent fogging caused by the difference in temperature between cold and hot. | 【Easy Installation】There is installation video on our product page and instruction is included in the package.【Easy Removal】- A removal tool is included to remove the case without damaging the watch.【What You Get】1 x 41mm Apple Watch front case, 1 x back cover, 1 x removal tool, 1 x cleaning tool. ( Smart watch, band and charger are not included ) All our products have limited one-year after-sale service. So if there are any problems with it, please contact us without hesitation.

【COMPATIBILITY】The Tensea iWatch face guard with back cover is tailored to fit Apple Watch Series 7/8 41mm perfectly. Bumper cover built in screen Ultratector give nice snug fit. NOTE: Not compatible with i Watch Series 8 45mm, Series 7 45mm, (Choose the other size variation), Series 3/2/1 38mm 42mm, SE Series 6/5/4 40mm 44mm, Apple Watch SE 2022 40mm 44mm, Apple Watch Ultra 49mm. | 【DAILY WATERPROOF】The built-in seal ring keeps water away from screen, which means you no longer need to remove case repeatedly and wipe water. It is waterproof perfectly for daily wear - showering, hand washing, sweating, rain, etc. The oleophobic coating on the surface of tempered glass will not cause water to collect on the glass. [NOTE: Not suitable for deep waterproofing, such as diving and swimming, etc.] | 【360° PROTECTION】This compatible iWatch 41mm face cover which can all around protect the front and back of your watch from dust, dirt, scratches and damages. These 9H tempered glass screen protector don’t affect the touch sensitivity. The sweatproof watch case is easy to install without removing the band. | 【UPGRADED MATERIAL】The anti-scratch tempered glass is 9 grade hardness. The shock-absorbing PC material is more hard, tougher and protective than traditional TPU. Glass can prevent fogging caused by the difference in temperature between cold and hot. | 【Easy Installation】There is installation video on our product page and instruction is included in the package.【Easy Removal】- A removal tool is included to remove the case without damaging the watch.【What You Get】1 x 41mm Apple Watch front case, 1 x back cover, 1 x removal tool, 1 x cleaning tool. ( Smart watch, band and charger are not included ) All our products have limited one-year after-sale service. So if there are any problems with it, please contact us without hesitation.

【COMPATIBILITY】The Tensea iWatch face guard with back cover is tailored to fit Apple Watch Series 7/8 41mm perfectly. Bumper cover built in screen Ultratector give nice snug fit. NOTE: Not compatible with i Watch Series 8 45mm, Series 7 45mm, (Choose the other size variation), Series 3/2/1 38mm 42mm, SE Series 6/5/4 40mm 44mm, Apple Watch SE 2022 40mm 44mm, Apple Watch Ultra 49mm. | 【DAILY WATERPROOF】The built-in seal ring keeps water away from screen, which means you no longer need to remove case repeatedly and wipe water. It is waterproof perfectly for daily wear - showering, hand washing, sweating, rain, etc. The oleophobic coating on the surface of tempered glass will not cause water to collect on the glass. [NOTE: Not suitable for deep waterproofing, such as diving and swimming, etc.] | 【360° PROTECTION】This compatible iWatch 41mm face cover which can all around protect the front and back of your watch from dust, dirt, scratches and damages. These 9H tempered glass screen protector don’t affect the touch sensitivity. The sweatproof watch case is easy to install without removing the band. | 【UPGRADED MATERIAL】The anti-scratch tempered glass is 9 grade hardness. The shock-absorbing PC material is more hard, tougher and protective than traditional TPU. Glass can prevent fogging caused by the difference in temperature between cold and hot. | 【Easy Installation】There is installation video on our product page and instruction is included in the package.【Easy Removal】- A removal tool is included to remove the case without damaging the watch.【What You Get】1 x 41mm Apple Watch front case, 1 x back cover, 1 x removal tool, 1 x cleaning tool. ( Smart watch, band and charger are not included ) All our products have limited one-year after-sale service. So if there are any problems with it, please contact us without hesitation.

【COMPATIBILITY】The Tensea iWatch face guard with back cover is tailored to fit Apple Watch Series 7/8 41mm perfectly. Bumper cover built in screen protector give nice snug fit. NOTE: Not compatible with i Watch Series 8 45mm, Series 7 45mm, (Choose the other size variation), Series 3/2/1 38mm 42mm, SE Series 6/5/4 40mm 44mm, Apple Watch SE 2022 40mm 44mm, Apple Watch Ultra 49mm. | 【DAILY WATERPROOF】The built-in seal ring keeps water away from screen, which means you no longer need to remove case repeatedly and wipe water. It is waterproof perfectly for daily wear - showering, hand washing, sweating, rain, etc. The oleophobic coating on the surface of tempered glass will not cause water to collect on the glass. [NOTE: Not suitable for deep waterproofing, such as diving and swimming, etc.] | 【360° PROTECTION】This compatible iWatch 41mm face cover which can all around protect the front and back of your watch from dust, dirt, scratches and damages. These 9H tempered glass screen protector don’t affect the touch sensitivity. The sweatproof watch case is easy to install without removing the band. | 【UPGRADED MATERIAL】The anti-scratch tempered glass is 9 grade hardness. The shock-absorbing PC material is more hard, tougher and protective than traditional TPU. Glass can prevent fogging caused by the difference in temperature between cold and hot. | 【Easy Installation】There is installation video on our product page and instruction is included in the package.【Easy Removal】- A removal tool is included to remove the case without damaging the watch.【What You Get】1 x 41mm Apple Watch front case, 1 x back cover, 1 x removal tool, 1 x cleaning tool. ( Smart watch, band and charger are not included ) All our products have limited one-year after-sale service. So if there are any problems with it, please contact us without hesitation.

【COMPATIBILITY】The Tensea iWatch face guard with back cover is tailored to fit Apple Watch Series 7/8 41mm perfectly. Bumper cover built in screen Ultratector give nice snug fit. NOTE: Not compatible with i Watch Series 8 45mm, Series 7 45mm, (Choose the other size variation), Series 3/2/1 38mm 42mm, SE Series 6/5/4 40mm 44mm, Apple Watch SE 2022 40mm 44mm, Apple Watch Ultra 49mm. | 【DAILY WATERPROOF】The built-in seal ring keeps water away from screen, which means you no longer need to remove case repeatedly and wipe water. It is waterproof perfectly for daily wear - showering, hand washing, sweating, rain, etc. The oleophobic coating on the surface of tempered glass will not cause water to collect on the glass. [NOTE: Not suitable for deep waterproofing, such as diving and swimming, etc.] | 【360° PROTECTION】This compatible iWatch 41mm face cover which can all around protect the front and back of your watch from dust, dirt, scratches and damages. These 9H tempered glass screen protector don’t affect the touch sensitivity. The sweatproof watch case is easy to install without removing the band. | 【UPGRADED MATERIAL】The anti-scratch tempered glass is 9 grade hardness. The shock-absorbing PC material is more hard, tougher and protective than traditional TPU. Glass can prevent fogging caused by the difference in temperature between cold and hot. | 【Easy Installation】There is installation video on our product page and instruction is included in the package.【Easy Removal】- A removal tool is included to remove the case without damaging the watch.【What You Get】1 x 41mm Apple Watch front case, 1 x back cover, 1 x removal tool, 1 x cleaning tool. ( Smart watch, band and charger are not included ) All our products have limited one-year after-sale service. So if there are any problems with it, please contact us without hesitation.

【COMPATIBILITY】The Tensea iWatch face guard with back cover is tailored to fit Apple Watch Series 7/8 45mm perfectly. Bumper cover built in screen protector give nice snug fit. NOTE: Not compatible with i Watch Series 8 41mm, Series 7 41mm, (Choose the other size variation), Series 3/2/1 38mm 42mm, SE Series 6/5/4 40mm 44mm, Apple Watch SE 2022 40mm 44mm, Apple Watch Ultra 49mm. | 【DAILY WATERPROOF】The built-in seal ring keeps water away from screen, which means you no longer need to remove case repeatedly and wipe water. It is waterproof perfectly for daily wear - showering, hand washing, sweating, rain, etc. The oleophobic coating on the surface of tempered glass will not cause water to collect on the glass. [NOTE: Not suitable for deep waterproofing, such as diving and swimming, etc.] | 【360° PROTECTION】This compatible iWatch 45mm face cover which can all around protect the front and back of your watch from dust, dirt, scratches and damages. These 9H tempered glass screen protector don’t affect the touch sensitivity. The sweatproof watch case is easy to install without removing the band. | 【UPGRADED MATERIAL】The anti-scratch tempered glass is 9 grade hardness. The shock-absorbing PC material is more hard, tougher and protective than traditional TPU. Glass can prevent fogging caused by the difference in temperature between cold and hot. | 【Easy Installation】There is installation video on our product page and instruction is included in the package.【Easy Removal】- A removal tool is included to remove the case without damaging the watch.【What You Get】1 x 45mm Apple Watch front case, 1 x back cover, 1 x removal tool, 1 x cleaning tool. ( Smart watch, band and charger are not included ) All our products have limited one-year after-sale service. So if there are any problems with it, please contact us without hesitation.

【COMPATIBILITY】The Tensea iWatch face guard with back cover is tailored to fit Apple Watch Series 7/8 45mm perfectly. Bumper cover built in screen protector give nice snug fit. NOTE: Not compatible with i Watch Series 8 41mm, Series 7 41mm, (Choose the other size variation), Series 3/2/1 38mm 42mm, SE Series 6/5/4 40mm 44mm, Apple Watch SE 2022 40mm 44mm, Apple Watch Ultra 49mm. | 【DAILY WATERPROOF】The built-in seal ring keeps water away from screen, which means you no longer need to remove case repeatedly and wipe water. It is waterproof perfectly for daily wear - showering, hand washing, sweating, rain, etc. The oleophobic coating on the surface of tempered glass will not cause water to collect on the glass. [NOTE: Not suitable for deep waterproofing, such as diving and swimming, etc.] | 【360° PROTECTION】This compatible iWatch 45mm face cover which can all around protect the front and back of your watch from dust, dirt, scratches and damages. These 9H tempered glass screen protector don’t affect the touch sensitivity. The sweatproof watch case is easy to install without removing the band. | 【UPGRADED MATERIAL】The anti-scratch tempered glass is 9 grade hardness. The shock-absorbing PC material is more hard, tougher and protective than traditional TPU. Glass can prevent fogging caused by the difference in temperature between cold and hot. | 【Easy Installation】There is installation video on our product page and instruction is included in the package.【Easy Removal】- A removal tool is included to remove the case without damaging the watch.【What You Get】1 x 45mm Apple Watch front case, 1 x back cover, 1 x removal tool, 1 x cleaning tool. ( Smart watch, band and charger are not included ) All our products have limited one-year after-sale service. So if there are any problems with it, please contact us without hesitation.

【COMPATIBILITY】The Tensea iWatch face guard with back cover is tailored to fit Apple Watch Series 7/8 45mm perfectly. Bumper cover built in screen protector give nice snug fit. NOTE: Not compatible with i Watch Series 8 41mm, Series 7 41mm, (Choose the other size variation), Series 3/2/1 38mm 42mm, SE Series 6/5/4 40mm 44mm, Apple Watch SE 2022 40mm 44mm, Apple Watch Ultra 49mm. | 【DAILY WATERPROOF】The built-in seal ring keeps water away from screen, which means you no longer need to remove case repeatedly and wipe water. It is waterproof perfectly for daily wear - showering, hand washing, sweating, rain, etc. The oleophobic coating on the surface of tempered glass will not cause water to collect on the glass. [NOTE: Not suitable for deep waterproofing, such as diving and swimming, etc.] | 【360° PROTECTION】This compatible iWatch 45mm face cover which can all around protect the front and back of your watch from dust, dirt, scratches and damages. These 9H tempered glass screen protector don’t affect the touch sensitivity. The sweatproof watch case is easy to install without removing the band. | 【UPGRADED MATERIAL】The anti-scratch tempered glass is 9 grade hardness. The shock-absorbing PC material is more hard, tougher and protective than traditional TPU. Glass can prevent fogging caused by the difference in temperature between cold and hot. | 【Easy Installation】There is installation video on our product page and instruction is included in the package.【Easy Removal】- A removal tool is included to remove the case without damaging the watch.【What You Get】1 x 45mm Apple Watch front case, 1 x back cover, 1 x removal tool, 1 x cleaning tool. ( Smart watch, band and charger are not included ) All our products have limited one-year after-sale service. So if there are any problems with it, please contact us without hesitation.

【COMPATIBILITY】The Tensea iWatch face guard with back cover is tailored to fit Apple Watch Series 7/8 45mm perfectly. Bumper cover built in screen Ultratector give nice snug fit. NOTE: Not compatible with i Watch Series 8 41mm, Series 7 41mm, (Choose the other size variation), Series 3/2/1 38mm 42mm, SE Series 6/5/4 40mm 44mm, Apple Watch SE 2022 40mm 44mm, Apple Watch Ultra 49mm. | 【DAILY WATERPROOF】The built-in seal ring keeps water away from screen, which means you no longer need to remove case repeatedly and wipe water. It is waterproof perfectly for daily wear - showering, hand washing, sweating, rain, etc. The oleophobic coating on the surface of tempered glass will not cause water to collect on the glass. [NOTE: Not suitable for deep waterproofing, such as diving and swimming, etc.] | 【360° PROTECTION】This compatible iWatch 45mm face cover which can all around protect the front and back of your watch from dust, dirt, scratches and damages. These 9H tempered glass screen protector don’t affect the touch sensitivity. The sweatproof watch case is easy to install without removing the band. | 【UPGRADED MATERIAL】The anti-scratch tempered glass is 9 grade hardness. The shock-absorbing PC material is more hard, tougher and protective than traditional TPU. Glass can prevent fogging caused by the difference in temperature between cold and hot. | 【Easy Installation】There is installation video on our product page and instruction is included in the package.【Easy Removal】- A removal tool is included to remove the case without damaging the watch.【What You Get】1 x 45mm Apple Watch front case, 1 x back cover, 1 x removal tool, 1 x cleaning tool. ( Smart watch, band and charger are not included ) All our products have limited one-year after-sale service. So if there are any problems with it, please contact us without hesitation.

【COMPATIBILITY】The Tensea iWatch face guard with back cover is tailored to fit Apple Watch Series 7/8 45mm perfectly. Bumper cover built in screen protector give nice snug fit. NOTE: Not compatible with i Watch Series 8 41mm, Series 7 41mm, (Choose the other size variation), Series 3/2/1 38mm 42mm, SE Series 6/5/4 40mm 44mm, Apple Watch SE 2022 40mm 44mm, Apple Watch Ultra 49mm. | 【DAILY WATERPROOF】The built-in seal ring keeps water away from screen, which means you no longer need to remove case repeatedly and wipe water. It is waterproof perfectly for daily wear - showering, hand washing, sweating, rain, etc. The oleophobic coating on the surface of tempered glass will not cause water to collect on the glass. [NOTE: Not suitable for deep waterproofing, such as diving and swimming, etc.] | 【360° PROTECTION】This compatible iWatch 45mm face cover which can all around protect the front and back of your watch from dust, dirt, scratches and damages. These 9H tempered glass screen protector don’t affect the touch sensitivity. The sweatproof watch case is easy to install without removing the band. | 【UPGRADED MATERIAL】The anti-scratch tempered glass is 9 grade hardness. The shock-absorbing PC material is more hard, tougher and protective than traditional TPU. Glass can prevent fogging caused by the difference in temperature between cold and hot. | 【Easy Installation】There is installation video on our product page and instruction is included in the package.【Easy Removal】- A removal tool is included to remove the case without damaging the watch.【What You Get】1 x 45mm Apple Watch front case, 1 x back cover, 1 x removal tool, 1 x cleaning tool. ( Smart watch, band and charger are not included ) All our products have limited one-year after-sale service. So if there are any problems with it, please contact us without hesitation.

【COMPATIBILITY】The Tensea iWatch face guard with back cover is tailored to fit Apple Watch Ultra 49mm. Bumper cover built in screen protector give nice snug fit. NOTE: Not compatible with i Watch Series 8 41mm 45mm, Series 7 41mm 45mm, (Choose the other size variation), Series 3/2/1 38mm 42mm, SE Series 6/5/4 40mm 44mm, Apple Watch SE 2022 40mm 44mm. | 【DAILY WATERPROOF】The built-in seal ring keeps water away from screen, which means you no longer need to remove case repeatedly and wipe water. It is waterproof perfectly for daily wear - showering, hand washing, sweating, rain, etc. The oleophobic coating on the surface of tempered glass will not cause water to collect on the glass. [NOTE: Not suitable for deep waterproofing, such as diving and swimming, etc.] | 【360° PROTECTION】This compatible iWatch Ultra 49mm face cover which can all around protect the front and back of your watch from dust, dirt, scratches and damages. These 9H tempered glass screen protector don’t affect the touch sensitivity. The sweatproof watch case is easy to install without removing the band. | 【UPGRADED MATERIAL】The anti-scratch tempered glass is 9 grade hardness. The shock-absorbing PC material is more hard, tougher and protective than traditional TPU. Glass can prevent fogging caused by the difference in temperature between cold and hot. | 【Easy Installation】There is installation video on our product page and instruction is included in the package.【Easy Removal】- A removal tool is included to remove the case without damaging the watch.【What You Get】1 x 49mm Apple Watch front case, 1 x back cover, 1 x removal tool, 1 x cleaning tool. ( Smart watch, band and charger are not included ) All our products have limited one-year after-sale service. So if there are any problems with it, please contact us without hesitation.

【COMPATIBILITY】The Tensea iWatch face guard with back cover is tailored to fit Apple Watch Ultra 49mm. Bumper cover built in screen protector give nice snug fit. NOTE: Not compatible with i Watch Series 8 41mm 45mm, Series 7 41mm 45mm, (Choose the other size variation), Series 3/2/1 38mm 42mm, SE Series 6/5/4 40mm 44mm, Apple Watch SE 2022 40mm 44mm. | 【DAILY WATERPROOF】The built-in seal ring keeps water away from screen, which means you no longer need to remove case repeatedly and wipe water. It is waterproof perfectly for daily wear - showering, hand washing, sweating, rain, etc. The oleophobic coating on the surface of tempered glass will not cause water to collect on the glass. [NOTE: Not suitable for deep waterproofing, such as diving and swimming, etc.] | 【360° PROTECTION】This compatible iWatch Ultra 49mm face cover which can all around protect the front and back of your watch from dust, dirt, scratches and damages. These 9H tempered glass screen protector don’t affect the touch sensitivity. The sweatproof watch case is easy to install without removing the band. | 【UPGRADED MATERIAL】The anti-scratch tempered glass is 9 grade hardness. The shock-absorbing PC material is more hard, tougher and protective than traditional TPU. Glass can prevent fogging caused by the difference in temperature between cold and hot. | 【Easy Installation】There is installation video on our product page and instruction is included in the package.【Easy Removal】- A removal tool is included to remove the case without damaging the watch.【What You Get】1 x 49mm Apple Watch front case, 1 x back cover, 1 x removal tool, 1 x cleaning tool. ( Smart watch, band and charger are not included ) All our products have limited one-year after-sale service. So if there are any problems with it, please contact us without hesitation.

【COMPATIBILITY】The Tensea iWatch face guard with back cover is tailored to fit Apple Watch Ultra 49mm. Bumper cover built in screen protector give nice snug fit. NOTE: Not compatible with i Watch Series 8 41mm 45mm, Series 7 41mm 45mm, (Choose the other size variation), Series 3/2/1 38mm 42mm, SE Series 6/5/4 40mm 44mm, Apple Watch SE 2022 40mm 44mm. | 【DAILY WATERPROOF】The built-in seal ring keeps water away from screen, which means you no longer need to remove case repeatedly and wipe water. It is waterproof perfectly for daily wear - showering, hand washing, sweating, rain, etc. The oleophobic coating on the surface of tempered glass will not cause water to collect on the glass. [NOTE: Not suitable for deep waterproofing, such as diving and swimming, etc.] | 【360° PROTECTION】This compatible iWatch Ultra 49mm face cover which can all around protect the front and back of your watch from dust, dirt, scratches and damages. These 9H tempered glass screen protector don’t affect the touch sensitivity. The sweatproof watch case is easy to install without removing the band. | 【UPGRADED MATERIAL】The anti-scratch tempered glass is 9 grade hardness. The shock-absorbing PC material is more hard, tougher and protective than traditional TPU. Glass can prevent fogging caused by the difference in temperature between cold and hot. | 【Easy Installation】There is installation video on our product page and instruction is included in the package.【Easy Removal】- A removal tool is included to remove the case without damaging the watch.【What You Get】1 x 49mm Apple Watch front case, 1 x back cover, 1 x removal tool, 1 x cleaning tool. ( Smart watch, band and charger are not included ) All our products have limited one-year after-sale service. So if there are any problems with it, please contact us without hesitation.

[COMPABILITY]: Only fit for your iWatch Series 3 2 1 38mm Smartwatch! NOTE: Not compatible with i Watch Series 7 45mm/41mm, Series 3/2/1 42mm, SE 2022 Series 6/5/4 40mm 44mm, Apple Watch Series 8 41mm 45mm,Apple Watch Ultra 49mm. | [FULL PROTECTION]: This iWatch 38mm Tempered Glass Screen Protector PC bumper can protect your watch from dust, dirt, scratches and damages. Easy to install and remove, accurate holes access to all controls and sensors, firm and secure. The snap design on the back keep the watch from popping off. | [UPGRADED MATERIAL]: The anti-scratch tempered glass is 9 grade hardness. The shock-absorbing PC material is more hard, tougher and more protective. | [Convenient and Practical]: Hard and crystal clear tempered glass with 99% high transparency keeps your watch's touch sensitivity and display as original. Do not need to take the case off to charge and easy access to all features. | [Include]: 3 packs Apple Watch Series 3 2 1 38mm Case and cleaning tools. (Note: watch, charger and band are not included.)

[COMPABILITY]: Only fit for your iWatch SE 2022 40mm, Series SE 6 5 4 40mm Smartwatch! NOTE: Not compatible with i Watch Series 7 45mm/41mm, Series 3/2/1 38mm 42mm, SE Series 6/5/4 44mm, Apple Watch Series 8 41mm 45mm, Apple Watch Ultra 49mm. | [FULL PROTECTION]: This iWatch 40mm Tempered Glass Screen Protector PC bumper can protect your watch from dust, dirt, scratches and damages. Easy to install and remove, accurate holes access to all controls and sensors, firm and secure. The snap design on the back keep the watch from popping off. | [UPGRADED MATERIAL]: The anti-scratch tempered glass is 9 grade hardness. The shock-absorbing PC material is more hard, tougher and more protective. | [Convenient and Practical]: Hard and crystal clear tempered glass with 99% high transparency keeps your watch's touch sensitivity and display as original. Do not need to take the case off to charge and easy access to all features. | [Include]: 3 packs Apple Watch SE Series 6 5 4 40mm Case and cleaning tools. (Note: watch, charger and band are not included.)