SIMPLE and FAST – Our Tablet Holder Bar Mount for iPad or any tablet can firmly clamp onto any bar in your workout area (15mm–38mm or 0.6–1.5 inches). Treadmill, Elliptical, Stationary Bike, etc. Just clamp it on, slide your tablet into the universal cradle, and you’re ready to rock. | REFER TO VIDEO IN IMAGE CAROUSEL TO SEE IT IN ACTION - Compatible with any tablet with a screen size between 7" a

SIMPLE AND FAST - This Bar Mount Tablet Holder holds an iPad, Galaxy Tablet, or any other popular tablet out there. It easily clamps to bars (from .25" to 2" or 6.5mm to 50mm). It also clamps to flat surfaces such as desks and countertops (from .2" to 1.75" or 5mm to 44mm). Perfect workout companion. Easily mounts to treadmills, ellipticals, stationary bikes, or other exercise equipment with the t

This component belongs to the Tackform Enterprise Series which is based on a large 1" rubberized ball. The entire series consists of various bases such as suction cups, cup holder mounts, headrest clamps, table clamps as well as phone, tablet and action camera holders. | 10 inch Extension - Aluminum rod provides a sturdy hold. Not recommended for applications which require constant re-positioning. Great for a set it and forget it mounting solution. | Replace a shorter or longer arm to get that perfect fit. Bend it into position and it's ready to go. | The Tackform Enterprise Series is a collection of components focused around a large 1" rubberized ball. Our Enterprise Series includes completely finished mounting solutions as well as individual components for your DIY crowd. We're ready to mount to your car, truck, bike, motorcycle, airplane, office, kitchen or anywhere else! All of our components are compatible with 1" ball systems from manufacturers such as Arkon, iBolt, RAM and more.

This component belongs to the Tackform Enterprise Series which is based on a large 1" rubberized ball. The entire series consists of various bases such as suction cups, cup holder mounts, headrest clamps, table clamps as well as phone, tablet and action camera holders. | Made of composite ABS plastic which provides solid strength while remaining light. Rubberized ball provides a secure grip with slight flexibility | This clamp has an extra-large clamp range and will hold bars up to 2" in diameter and as small as 3/8" of an inch thick. It will also conveniently hold squared edges on a table or a bench ranging from .2" thick to 1.75" thick. | This inside of the clamp is padded to provide gripping support and protection on any mounting surface. | The Tackform Enterprise Series is a collection of components focused around a large 1" rubberized ball. Our Enterprise Series includes completely finished mounting solutions as well as individual components for your DIY crowd. We're ready to mount to your car, truck, bike, motorcycle, airplane, office, kitchen or anywhere else! All of our components are compatible with 1" ball systems from manufacturers such as Arkon, iBolt, RAM and more.

This component belongs to the Tackform Enterprise Series which is based on a large 1" rubberized ball. The entire series consists of various bases such as suction cups, cup holder mounts, headrest clamps, table clamps as well as phone, tablet and action camera holders. | Made of composite ABS plastic which provides solid strength while remaining light. Rubberized balls provide a secure grip with slight flexibility | This adapter can be used to add an additional arm and articulation point. | The Tackform Enterprise Series is a collection of components focused around a large 1" rubberized ball. Our Enterprise Series includes completely finished mounting solutions as well as individual components for your DIY crowd. We're ready to mount to your car, truck, bike, motorcycle, airplane, office, kitchen or anywhere else! All of our components are compatible with RAM as well as 1" ball systems from manufacturers such as Arkon, iBolt and more.

ABOUT US - Tackform, headquartered in Chicago, IL, believes that quality products should last a lifetime. In a world filled with low cost, short lived, quick fix mounting solutions, we chose to stand apart by manufacturing and selecting products designed to endure the roughest of conditions. Our Enduro Series products are here to serve many industries including Commercial Fleet Trucking, Aviation, Agriculture, Off-Roading and Overlanding to name a few. | DEVICE COMPATIBILITY - Be ELD Compliant. The tablet cradle will accommodate any tablet with a screen size between 7" and 18.4", or a tablet with a width between 6.25" and 10.5". This is compatible with Apple iPad Pro 12.9, iPad Air 2 and iPad Air, iPad 4, 3, and 2, Galaxy Note 10.1, Galaxy Note Pro 12.2, Galaxy Tab 4 10.1, Galaxy Tab Pro 10.1 and 12.2, Galaxy Tab S 10.5, Google Pixel C, Nexus 10, and Nexus 9, LG G Pad 10.1, Sony Xperia Tablet Z4, Surface Pro and Nintendo Switch. | INSTALLATION - AMPS Mounting plate allows a for quick semi permanent installation for any flat surface (screws not included). We understand there is no one size fits all solution. With TRUCK DRIVERS we developed a solution that will accommodate a wide range of vehicles. Important: Use caution and consult a mobile install professional to avoid drilling into any highly sensitive components. | MOUNTING POSITION VERSATILITY - Between the drill base and the cradle is our modular arm with a hardened aluminum ball connector at each end allowing two connectors a full range of motion in addition to the locking elbow joint in between them. This metal arm configuration allows easy repositioning, along with a ROCK SOLID, vibration free hold. | QUALITY ASSURANCE - Tackform Enduro Series products are reliability tested to ensure the product will withstand conditions such as vibration, temperature, humidity, extreme heat and extreme cold.

Compatible with our entire line of Tackform Enduro Series 20mm components, which consists of suction cups, table clamps, headrest clamps, phone holders, tablet holders, action camera holders and more. | All metal construction. | The most popular application for this is removing a handlebar bolt and replacing with this adapter. | The Tackform Enduro Series is a collection of components focused around an aluminum 20mm ball. Our Enduro series is an entire ecosystem of components that can be mixed and matched to create the perfect mounting solution for your car, truck, bicycle, motorcycle, airplane, office, workbench or anywhere else you'd like to mount your Phone, Tablet, GPS and many other devices. This also works with other popular 20mm systems on the market.

STURDY BASE - Innovative design works with most cup holders. Adjustable to fit in cup holders between 2 ⅞” and 3 ⅝” in diameter. Expanding mechanism allows you to securely tighten the base in the cup holder of your choice. | ENDURO SERIES ARM - An all aluminum arm with locking elbow and two articulating ball joints allows you to position the phone at any angle. This will work with any of our other Enduro Series components. Mix and match Enduro components to customize a solution for your particular needs. | SPRING LOADED TABLET CRADLE - Tablet cradle with spring loaded design for easy mounting and dismounting of tablet. Screen sizes between 7” and 18.4” can be held effortlessly. This mount works with all tablets up to 11” wide, including all of the popular models, such as the iPad, Galaxy Tabs, Microsoft Surface, Amazon Fire, etc. | GOOD, BAD AND UGLY CUP HOLDERS - Not all cup holders are created equal and we at Tackform understand that. Cup holders vary in location, size, shape, depth and overall sturdiness. For this reason, we offer our 100% BULLETPROOF SATISFACTION GUARANTEE. If you’re not happy with how this fits in your cup holder, give us a call and we’ll see if we can come up with a better solution for your particular application.

This component belongs to the Tackform Enterprise Series which is based on a large 1" rubberized ball. The entire series consists of various bases such as suction cups, cup holder mounts, headrest clamps, table clamps as well as phone, tablet and action camera holders. | 15.5 inch Extension - Aluminum rod provides a sturdy hold. Not recommended for applications which require constant re-positioning. Great for a set it and forget it mounting solution. | Replace a shorter or longer arm to get that perfect fit. Bend it into position and it's ready to go. | The Tackform Enterprise Series is a collection of components focused around a large 1" rubberized ball. Our Enterprise Series includes completely finished mounting solutions as well as individual components for your DIY crowd. We're ready to mount to your car, truck, bike, motorcycle, airplane, office, kitchen or anywhere else! All of our components are compatible with RAM as well as 1" ball systems from manufacturers such as Arkon, iBolt and more.

Compatible with our entire line of Tackform Enduro Series 20mm components, which consists of suction cups, table clamps, headrest clamps, phone holders, tablet holders, action camera holders and more. | All aluminum construction. Clean black hard anodized finish. Metal ball won't break, wear out or shrink, like plastic. | Works great with Garmin products that utilize the 17mm ball, as well as other GPS manufacturers. | The Tackform Enduro Series is a collection of components focused around an aluminum 20mm ball. Our Enduro series is an entire ecosystem of components that can be mixed and matched to create the perfect mounting solution for your car, truck, bicycle, motorcycle, airplane, office, workbench or anywhere else you'd like to mount your Phone, Tablet, GPS and many other devices. This also works with other popular 20mm systems on the market.

This component belongs to the Tackform Enterprise Series which is based on a large 1" rubberized ball. The entire series consists of various bases such as suction cups, cup holder mounts, headrest clamps, table clamps as well as phone, tablet and action camera holders. | Extra long 6", all aluminum arm can be used to replace a shorter arm or used in conjuction with a ball to ball adapter, this can provide additional reach. | When compared to a two knob arm, this has limited movement options which makes it a great choice for mounts that won't be adjusted often. | The Tackform Enterprise Series is a collection of components focused around a large 1" rubberized ball. Our Enterprise Series includes completely finished mounting solutions as well as individual components for your DIY crowd. We're ready to mount to your car, truck, bike, motorcycle, airplane, office, kitchen or anywhere else! All of our components are compatible with 1" ball systems from manufacturers such as Arkon, iBolt, RAM and more.

Compatible with our entire line of Tackform Enduro Series 20mm components, which consists of suction cups, table clamps, headrest clamps, phone holders, tablet holders, action camera holders and more. | All aluminum construction. Thumbscrew is made of ABS Plastic. | The coupler only can be used in a variety of situations. Convert a 1" arm down to a 20mm arm. Connect directly to a flange (TF-AR-21) for a super short reach arm also. | The Tackform Enduro Series is a collection of components focused around an aluminum 20mm ball. Our Enduro series is an entire ecosystem of components that can be mixed and matched to create the perfect mounting solution for your car, truck, bicycle, motorcycle, airplane, office, workbench or anywhere else you'd like to mount your Phone, Tablet, GPS and many other devices. This also works with other popular 20mm systems on the market.

MOUNTING POSITION VERSATILITY - Between the drill base and the cradle is our compact 3.75" arm with ball and socket joints at each end allowing a full range of motion. The arm allows quick adjustment using a simple thumbscrew and provides a ROCK SOLID, vibration free hold. | INSTALLATION - AMPS Mounting plate allows a for quick semi permanent installation for any flat surface (screws not included). We understand there is no one size fits all solution. With TRUCK DRIVERS we developed a solution that will accommodate a wide range of vehicles. Important: Use caution and consult a mobile install professional to avoid drilling into any highly sensitive components. | DEVICE COMPATIBILITY - Be ELD Compliant. The tablet cradle will accommodate any tablet with a screen size between 7" and 18.4", or a tablet with a width between 6.25" and 10.5". This includes the Apple iPad Pro 12.9, iPad Air 2 and iPad Air, iPad 4, 3, and 2, Galaxy Note 10.1, Galaxy Note Pro 12.2, Galaxy Tab 4 10.1, Galaxy Tab Pro 10.1 and 12.2, Galaxy Tab S 10.5, Google Pixel C, Nexus 10, and Nexus 9, LG G Pad 10.1, Sony Xperia Tablet Z4, Surface Pro and Nintendo Switch. | QUALITY ASSURANCE - Tackform Enterprise Series products are reliability tested to ensure the product will withstand conditions such as vibration, temperature, humidity, extreme heat and extreme cold. | ABOUT US - Tackform, headquartered in Chicago, IL, believes that quality products should last a lifetime. In a world filled with low cost, short lived, quick fix mounting solutions, we chose to stand apart by manufacturing and selecting products designed to endure the roughest of conditions. Our Enterprise Series products are here to serve many industries including Commercial Fleet Trucking, Aviation, Agriculture, Off-Roading and Overlanding.

REINFORCED ALUMINUM BASE - Completely eliminates the chance of breaking at the base, unlike competitors' plastic bases. | DEVICE COMPATIBILITY - Be ELD Compliant. The tablet cradle will accommodate any tablet with a screen size between 7" and 18.4", or a tablet with a width between 6.25" and 10.5". Compatible With Apple iPad Pro 12.9, iPad Air 2 and iPad Air, iPad 4, 3, and 2, Samsung Galaxy Tab, Galaxy Note 10.1, Galaxy Note Pro 12.2, Galaxy Tab 4 10.1, Galaxy Tab Pro 10.1 and 12.2, Galaxy Tab S 10.5, Google Pixel C, Nexus 10, and Nexus 9, LG G Pad 10.1, Sony Xperia Tablet Z4, Surface Pro and Nintendo Switch.