This is 75 Ohm RG179 coaxial SDI Cable, which is used to connect any equipment with SDI input and output interfaces, such as Cameras or Monitors. It can be used for the transmission of RF and HD quality video signals, The 18 AWG gauge cable is FPE insulated and constructed with high density OFC braided shielding to reject both EMI and RF interference. | Supports HD-SDI, 3G-SDI Video signals, Suitable for Blackmagic Hyperdeck Shuttle,ARRI Cameras, RED Cameras, Atomos Monitors，SmallHD Monitors, Wireless image transmission equipment, 4K Video Camera, studios, mobile trucks, staging etc. | Plug A: Straight BNC Male Connector; Plug B: Right Angle BNC Male Connector. | Cable Length : 60cm/24inch (We can customize with other length, please contact us if you need). | Each cable we produce has been rigorously tested and is compatible with machines from a variety of major brand suppliers,We are committed to all the products are qualified and high-quality.

This Hirose 20 Pin Lens Control Y Cable Fit for Canon Servo Controllers to a Servo lens. | it allows you to simultaneously control the focus and zoom of your Canon CN-E Servo Lens. It is compatible with the Canon 18-80mm and 70-200mm servo lenses. so Servo lenses can be connected to FPD-400D Focus Controller and ZSD-300D Zoom Controller at the same time. | Plug A: Right Angle HR25A-9P-20P Hirose 20 Pin Male Connector; Plug B: Hirose 20 Pin Female Connector. | Cable Length: 15cm/5.9inch (We can customize with other length, please contact us if you need). | Each cable we produce has been rigorously tested and is compatible with machines from a variety of major brand suppliers,We are committed to all the products are qualified and high-quality.

This 8 Pin to 20 Pin cable is for Canon Zoom Focus Servo Controller with 8 Pin Connector to Canon’s Hirose 20 Pin broadcast Lens. | Useing instructions: The 8 pin Female connect to your Canon’s Zoom Focus Servo Controller; the Hirose 20 Pin connect to your Canon’s broadcast servo Lens. | Plug A: 8 Pin Female Connector; Plug B: Right Angle Hirose 20 Pin male Connector. | Cable Length: 7.87inches/20cm (We can customize with other length, please contact us if you need). | Each cable we produce has been rigorously tested and is compatible with machines from a variety of major brand suppliers,We are committed to all the products are qualified and high-quality.

This Red EVF/LCD Cable Fit for Connect Red Epic, Red Scarlet, and Red One cameras to Red DSMC2 Touch 7.0″ Ultra-Brite LCD/ Bomb EVF/ Touchscreen Display. | Also Compatibility with Red DSMC2 HELIUM, Red DSMC2 GEMINI, EPIC-W, SCARLET-W,WEAPON 8K VV, WEAPON 6K,WEAPON 8K S35 Cameras etc... | Plug A: Straight 1B 16 pin Male Connector; Plug B: Right Angle 1B 16 pin Male Connector. | Cable Length : 12Inches/30cm (We can customize with other length, please contact us if you need). | Each cable we produce has been rigorously tested and is compatible with machines from a variety of major brand suppliers,We are committed to all the products are qualified and high-quality.

This Red EVF/LCD Cable Fit for Connect Red Epic, Red Scarlet, and Red One cameras to Red DSMC2 Touch 7.0″ Ultra-Brite LCD/ Bomb EVF/ Touchscreen Display. | Also Compatibility with Red DSMC2 HELIUM, Red DSMC2 GEMINI, EPIC-W, SCARLET-W,WEAPON 8K VV, WEAPON 6K,WEAPON 8K S35 Cameras etc... | Plug A: Straight 1B 16 pin Male Connector; Plug B: Right Angle 1B 16 pin Male Connector. | Cable Length : 15.7Inches/40cm (We can customize with other length, please contact us if you need). | Each cable we produce has been rigorously tested and is compatible with machines from a variety of major brand suppliers,We are committed to all the products are qualified and high-quality.

This cable is designed for connecting timecode generator to Cameras and Audio Mixers, Transmit time code information between them. | It is Bi-directional timecode signal cable, Suitable for the following machines: Zaxcom and more timecode generators (with 3.5mm jack), C300 MK2 / C500, Sy F55/ PDW 700 / EX3 / PMW 200, Photograph Camera, Zoom F4 F8 and more. | Plug A: Right Angle 3.5mm TRS Jack Connector; Plug B: Right angle BNC Connector. | Cable Length: 11.8inches/30cm (We can customize with other length, please contact us if you need). | Each cable we produce has been rigorously tested and is compatible with machines from a variety of major brand suppliers,We are committed to all the products are qualified and high-quality.

This cable is designed for connecting timecode generator to Cameras and Audio Mixers, Transmit time code information between them. | It is Bi-directional timecode signal cable, Suitable for the following machines: Zaxcom and more timecode generators (with 3.5mm jack), C300 MK2 / C500, Sy F55/ PDW 700 / EX3 / PMW 200, Photograph Camera, Zoom F4 F8 and more. | Plug A: Right Angle 3.5mm TRS Jack Connector; Plug B: Right angle BNC Connector. | Cable Length: 31.5inches/80cm (We can customize with other length, please contact us if you need). | Each cable we produce has been rigorously tested and is compatible with machines from a variety of major brand suppliers,We are committed to all the products are qualified and high-quality.

Fit to power your Sound Devices 688 644 633, Zoom F4 F8, Zaxcom using an external Mobile Power Battery Bank with a USB DC 5V 2A Outport. | This cable contains a voltage Boost module, Which can regulate The voltage of DC 5V 2A to DC 12V 1.5A. | Use this cable with select USB 5V 2A Mobile Power Battery Bank for a longer-lasting power solution. | Plug A: USB Male Connector; Plug B: Hirose 4 Pin Male Connector. | Cable Length: 24inches/60cm (We can customize with other length, please contact us if you need).

Fit to power Sound Devices 688 633 664 series mixers recorders, Zoom F4 F8 recorder using an external QC3.0/PD3.0 Mobile Power Battery with a USB DC 12V Outport. | The Power Source need DC 12 volts USB output power bank. | Plug A: USB Male Connector; Plug B: Hirose 4 pin Male Connector. | Cable Length: 39inches/1m(We can customize with other length, please contact us if you need). | Each cable we produce has been rigorously tested and is compatible with machines from a variety of major brand suppliers,We are committed to all the products are qualified and high-quality.

this VF Monitor Cable is used to connect the MVF-2 viewfinder unit to the ALEXA Mini LF Camera. | this Cable feature keyless CoaXpress connector, So it can connect and disconnect quickly, can transmit monitoring signals and control signals stably over a long distance, which is convenient for you to view and control the status of the camera. | Plug A: CoaXpress 1 Pin Male Connector; Plug B: CoaXpress 1 Pin Male Connector. | Cable Length: 31.5inches/80cm (We can customize with other length, please contact us if you need). | Each cable we produce has been rigorously tested and is compatible with machines from a variety of major brand suppliers,We are committed to all the products are qualified and high-quality.