This cable is for the Nucleus-M give you run/stop capabilities in camera systems that support it,Such as ARRI Alexa Camera or other Camera with R/S port. Note that this cable was specifically designed for the Nucleus-M, so the R/S function only works with the Nucleus-M's own hand unit and handles. | The 7 pin Male connect to the Nucleus-M Wireless Follow Focus Motor, the Fischer 3 pin connect to the R/S port of the camera. | Plug A : 0B 7 Pin Male Connector, Plug B: Fischer 3 Pin Male Connector. | Cable Length : 24Inches/60CM (We can customize with other length, please contact us if you need). | Each cable we produce has been rigorously tested and is compatible with machines from a variety of major brand suppliers,We are committed to all the products are qualified and high-quality.
Fit to Power SmallHD DP6-SDI DP6-SLR field monitors,Paralinx Ace,LCD monitors,LED lighting equipment (DC powered), BlackMagic Cameras,Production equipment,DSLR Kit or other with DC 12V 5.5*2.5mm devices. It's compatible with various devices featuring a matching 2.5mm power port. | Power source can be battery, battery plate with D-Tap output, Such as Anton-Bauer gold mount battery or V Mount battery and other Camera or Camera Accessories with on-board D Tap output port. | Plug A : D-Tap Male Connector, Plug B: Right Angle DC 5.5*2.5mm Connector. Tip: there is no voltage conversion circuit in the cable, the output voltage is following the input voltage, please make sure that the battery output voltage does not exceed the allowable input voltage range of your device. | Cable Length : 39Inches/100CM (We can customize with other length, please contact us if you need). | Each cable we produce has been rigorously tested and is compatible with machines from a variety of major brand suppliers,We are committed to all the products are qualified and high-quality.
This Power Adapter Fit to Power supply for Basler ace GigE, Basler racer, Basler beat, Basler aviator CL, Basler runner, Basler sprint Industrial Cameras. | AC wide voltage input, Input: AC100-240V-50/60Hz. | Output: DC 12V 2A 24W. | Connector: Hirose(HR10A-7P-6S) 6 pin female. Cable length: about 39inches/1m. | This is a US Plug. If you want UK Plug or European(EU) Plug, please leave message after you purchase.
It is a cable which enables you to power your BMPCC Blackmagic Pocket Camera from an Anton/Bauer or IDX D-Tap battery. | Fit for 2.5mm*0.7mm DC connector for Blackmagic BMPCC camera and other device. | Plug A : D-Tap Male Connector, Plug B: Right Angle DC 2.5*0.7mm plug Connector. | Cable Length : 36Inches/90CM (We can customize with other length, please contact us if you need). | Each cable we produce has been rigorously tested and is compatible with machines from a variety of major brand suppliers,We are committed to all the products are qualified and high-quality.
The 2 Pin D-Tap P-tap conversion extension cable, It is best extender choose for anton-bauer battery DIY, handheld camera package teradek. | It allows you to power popular camera video assist and production equipment such as mini-converters, Digital Video Audio Recorders, Monitors and Transmitters from Anton-Bauer V-mount or Gold mount batteries. | Plug A: D Tap 2 Pin Male Connector; Plug B: D Tap 2 Pin Female Connector. | No stretch length about 19.7inches (50cm), Stretch max length is about 35 inches (90cm). | Quality Assurance: SZRMCC male to female d-tap battery power cable 24-hour professional after-sales service,each product strict quality inspection, if you are not satisfied with any problem,please contact us.
This cable is designed to convert the D-tap power interface to a usb interface, so it is very suitable for powering equipment that requires 5V voltage,Such as Mobile Phone iPad IPone or Pad Device. | Power source can be battery, battery plate with D-Tap output,Power input : DC 8V to 22V, Power output : 5V, 2A. | Plug A: D-tap 2 pin male Connector; Plug B: Double USB 5V 2A Female Connector. | Cable Length: 51inches/1.3m(We can customize with other length, please contact us if you need). | Each cable we produce has been rigorously tested and is compatible with machines from a variety of major brand suppliers,We are committed to all the products are qualified and high-quality.
this Control cable for DJI Ronin Tethered Control Handle connect to the Communication Expansion adapter Port and establishes a wired connection to control Ronin RS2 Stabilizer. | this Cable also fit for Power and control DJI Wireless Follow Focus Motor Unit from DJI RONIN 2 Gimbal Stabilizer 6 Pin output Port. | Plug A : 6 Pin (4+2) Male Connector, Plug B: 6Pin Male connector. | Cable Length : 78.7inches/2m (We can customize with other length, please contact us if you need). | Each cable we produce has been rigorously tested and is compatible with machines from a variety of major brand suppliers,We are committed to all the products are qualified and high-quality.
this Control cable for DJI Ronin Tethered Control Handle connect to the Communication Expansion adapter Port and establishes a wired connection to control Ronin RS2 Stabilizer. | this Cable also fit for Power and control DJI Wireless Follow Focus Motor Unit from DJI RONIN 2 Gimbal Stabilizer 6 Pin output Port. | Plug A : 6 Pin (4+2) Male Connector, Plug B: 6Pin Male connector. | Cable Length : 11.8inches/30cm (We can customize with other length, please contact us if you need). | Each cable we produce has been rigorously tested and is compatible with machines from a variety of major brand suppliers,We are committed to all the products are qualified and high-quality.
this Control cable for DJI Ronin Tethered Control Handle connect to the Communication Expansion adapter Port and establishes a wired connection to control Ronin RS2 Stabilizer. | this Cable also fit for Power and control DJI Wireless Follow Focus Motor Unit from DJI RONIN 2 Gimbal Stabilizer 6 Pin output Port. | Plug A : Right Angle 6 Pin (4+2) Male Connector, Plug B: Right Angle 6Pin Male connector. | Cable Length : 24inches/60CM (We can customize with other length, please contact us if you need). | Each cable we produce has been rigorously tested and is compatible with machines from a variety of major brand suppliers,We are committed to all the products are qualified and high-quality.
this Control cable for DJI Ronin Tethered Control Handle connect to the Communication Expansion adapter Port and establishes a wired connection to control Ronin RS2 Stabilizer. | this Cable also fit for Power and control DJI Wireless Follow Focus Motor Unit from DJI RONIN 2 Gimbal Stabilizer 6 Pin output Port. | Plug A : 6 Pin (4+2) Male Connector, Plug B: 6Pin Male connector. | Cable Length : 31.5inches/80cm (We can customize with other length, please contact us if you need). | Each cable we produce has been rigorously tested and is compatible with machines from a variety of major brand suppliers,We are committed to all the products are qualified and high-quality.
This cable is for the Nucleus-M give you run/stop capabilities in camera systems that support it,Such as Canon C200 C300 MKII Camera. | Compatible with Canon C200 C300 MKII Camera from the Nucleus-M Hand Grips or FIZ unit when the run/stop cable is connected via a Nucleus-M motor’s 7 pin. | Plug A : 0B 7 Pin Male Connector, Plug B: 3.5mm 4 Knots Connector. | Cable Length : 24Inches/60CM (We can customize with other length, please contact us if you need). | Note that this cable was specifically designed for the Nucleus-M, so the R/S function only works with the Nucleus-M's own hand unit and handles.
This cable is used to connect a Camera device with a standard size BNC Female interface on one end and a monitor device with Micro BNC HD-SDI interface on the other end. | Real 75-ohm connectors and cable, it is capable of carrying up to a 12G-SDI UHD 4K signal up to 190', Suitable for Blackmagic Design Monitor, Blackmagic HyperDeck Shuttle, 4K Video Camera, Atomos Monitor, CCTV devices, studios, mobile trucks, staging, and other HD-SDI, 3G-SDI, and 6G-SDI Video signal transmission applications. | Plug A: Original High Density Micro BNC Connector; Plug B: Standard BNC Female Connector. | Cable Length : 5.9inches/15cm (We can customize with other length, please contact us if you need). | Each cable we produce has been rigorously tested and is compatible with machines from a variety of major brand suppliers,We are committed to all the products are qualified and high-quality.
This New DR E6(LP E6) DC Coupler Dummy Battery replacement for LP-E6 real lithium Battery, Fit to connect USB C Type-C Output Port give power for Canon EOS 5D2 5D3 5D4 6D 6D2 7D 7D2 60D 70D 80D and other DSLR cameras and SmallHD 501 502 702 Monitors. | Power Source can be USB C Type-C PD Power Banks or USB C PD AC outlets with PD Trigger Function, LP-E6 DC Coupler Dummy Battery output is about 8.4V 2A, So you can shoot for a long time without replacing battery, perfect for long time shooting. | USB Type-C has an indicator light, When a suitable power source is connected and the PD function is successfully triggered, the indicator light will turn green. If the indicator light is off, it means the power source is not suitable. 【Please use the power bank/charger and mobile power bank with PD 9V/12V protocol output】 | Plug A: USB C Type-C with indicator light Connector; Plug B: LP-E6 Dummy Battery. | No stretch length about 13.8inches (35cm), Stretch max length is about 31.5 inches (80cm).
M12 connectors sensor cables which are suited for industrial controls automation, device network applications, io link, industrial machinery, ethernet, machine vision cognex ccd cameras, data and power transmission. | This M12 Sensor Actuator Cable 26AWG Waterproof IP67-rated for dust water protection and durable; Reliable Signal Transmission, black PVC jacket cable, thread locking mechanism, shock resistant. | Plug A: M12 8 Pin A-Code Male Connector; Plug B: M12 8 Pin A-Code Female Connector. | Cable Length: 15m/49ft (Surpport customise other lengths,if you need please contact us before purchasing ). | Quality Assurance: SZRMCC M12 8 pin male to female industrial vision sensor cable 24-hour professional after-sales service,each product strict quality inspection, if you have any problem,please contact us.
8pin Ethernet Cable Fit for Industrial Machinery, Ethernet, network applications, Matrix Vision, Triton camera models, GigE Vision ,basler AVT Sony Cognex In Sight 8200 8400 CCD cameras and so on. | This M12 X code 8pin male cable thread design for vibration protection IP67 dust & water protection;Overall foil and braid shielded ,Reliable Signal Transmission,black PUV jacket cable which is stable and durable. | Plug A: M12 8 Pin X-Code Male Connector; Plug B: M12 8 Pin X-Code Male Connector. | Cable Length: 10m/33ft (Support any length customize, please contact us if you need). | Quality Assurance: M12 8pin Basler Cognex cable 24-hour professional after-sales service,each product strict quality inspection, if you are not satisfied with any problem,please contact us.
8pin Ethernet Cable Fit for Industrial Machinery, Ethernet, network applications, Matrix Vision, Triton camera models, GigE Vision ,basler AVT Sony Cognex In Sight 8200 8400 CCD cameras and so on. | This M12 X code 8pin male cable thread design for vibration protection IP67 dust & water protection;Overall foil and braid shielded ,Reliable Signal Transmission,black PUV jacket cable which is stable and durable. | Plug A: M12 8 Pin X-Code Male Connector; Plug B: M12 8 Pin X-Code Male Connector. | Cable Length: 15m/49ft (Support any length customize, please contact us if you need). | Quality Assurance: M12 8pin Basler Cognex cable 24-hour professional after-sales service,each product strict quality inspection, if you are not satisfied with any problem,please contact us.
8pin Ethernet Cable Fit for Industrial Machinery, Ethernet, network applications, Matrix Vision, Triton camera models, GigE Vision ,basler AVT Sony Cognex In Sight 8200 8400 CCD cameras and so on. | This M12 X code 8pin male cable thread design for vibration protection IP67 dust & water protection;Overall foil and braid shielded ,Reliable Signal Transmission,black PUV jacket cable which is stable and durable. | Plug A: M12 8 Pin X-Code Male Connector; Plug B: M12 8 Pin X-Code Male Connector. | Cable Length: 1m/3.2ft (Support any length customize, please contact us if you need). | Quality Assurance: M12 8pin Basler Cognex cable 24-hour professional after-sales service,each product strict quality inspection, if you are not satisfied with any problem,please contact us.
8pin Ethernet Cable Fit for Industrial Machinery, Ethernet, network applications, Matrix Vision, Triton camera models, GigE Vision ,basler AVT Sony Cognex In Sight 8200 8400 CCD cameras and so on. | This M12 X code 8pin male cable thread design for vibration protection IP67 dust & water protection;Overall foil and braid shielded ,Reliable Signal Transmission,black PUV jacket cable which is stable and durable. | Plug A: M12 8 Pin X-Code Male Connector; Plug B: M12 8 Pin X-Code Male Connector. | Cable Length: 3m/9.8ft (Support any length customize, please contact us if you need). | Quality Assurance: M12 8pin Basler Cognex cable 24-hour professional after-sales service,each product strict quality inspection, if you are not satisfied with any problem,please contact us.
8pin Ethernet Cable Fit for Industrial Machinery, Ethernet, network applications, Matrix Vision, Triton camera models, GigE Vision ,basler AVT Sony Cognex In Sight 8200 8400 CCD cameras and so on. | This M12 X code 8pin male cable thread design for vibration protection IP67 dust & water protection;Overall foil and braid shielded ,Reliable Signal Transmission,black PUV jacket cable which is stable and durable. | Plug A: M12 8 Pin X-Code Male Connector; Plug B: M12 8 Pin X-Code Male Connector. | Cable Length: 8m/26ft (Support any length customize, please contact us if you need). | Quality Assurance: M12 8pin Basler Cognex cable 24-hour professional after-sales service,each product strict quality inspection, if you are not satisfied with any problem,please contact us.