【C to A connectivity】 The C to A cable offers you a convenient way to optimize your viewing. Connect digital cameras, camcorders, tablets, or other micro cable-enabled devices to the port on most displays to enjoy the high-definition audio and video. | 【Ultra Thin & Flexible】The ultra-thin and flexible high-speed cable (35m/1.15ft) with 3.6mm diameter fits perfectly in tight spaces, designed for gimbal, camera stabilizer, and rigs applications where flexibility and compact cable routing is required. | 【High-Speed Cable】Ultra thin 2.0 version standard cable supports Ultra HD 4K@60Hz, Full HD 1080P, 3D, Ethernet, Audio Return Channel(ARC), HDR, and you can transmit high-resolution sound formats.ll HD 1080P, 3D, Ethernet, Audio Return Channel(ARC), HDR, and you can transmit high-resolution sound formats | 【4K@60Hz video output】The cable fully supports 4K resolution at 60Hz and 2K resolution at 165Hz with life-like color. You can enjoy big screens and true-to-life 4K visuals for the ultimate visual experience. | 【What you will get】1 x Cable，1 x Cable tie

【Compact Design】SmallRig Mini Follow Focus 3010C is designed for easy and quick focus control in video shooting. It is compatible with most cameras like DLSRs and mirrorless Cameras. In addition, it features a super lightweight design with only 204g/7.2oz, is compact and portable, and is easy to carry outside. | 【Easily Adjustable A/B Stops】The A/B hard stops of the follow focus are adjustable, you can adjust the suitable A/B focal length according to your shooting needs. Moreover, by turning on/off the AB stops lock, you can easily switch focal length between 360° unlimited zoom and A/B focal length. | 【Anti-Slip & Anti-Sweat Design】The Mini Follow Focus F40 imitates a sports car hub, adopts an anti-slip and anti-sweat design, and its excellent damping feeling and ergonomic design helps to control the focal length you need more accurately and comfortably, thus realizing a better shooting. | 【Modular Design】Follow Focus F40 adopts a modular design that allows for rapid and easy assembling and disassembling on the left and upper sides of the camera rapidly and easily. Besides, the included 15mm Rod 1050 and Rod Clamp (with NATO rail) 3011 allow for attaching other SmallRig accessories to improve the compactness of your equipment. | 【Multiple Shooting Scenes】The installation angle of this follow focus can be adjusted and supports handheld, tripod-mounted, and other shooting scenarios. Furthermore, using the included snap-on gear ring belt and interchangeable M0.8 gears (standard M0.8-43T gear, optional model: M0.8-65T gear 3200, M0.8-38T gear 3285) enables compatibility with different diameters of lenses and achieves diversified shooting. | 【Additional Gears】You could choose additional gears to help achieve a better shooting experience: SmallRig Seamless Focus Gear Ring 3291/3292/3293/3294/3295/3296/4185/4186/4187 | 【Included Storage Box】Comes with a compact storage box for easy carry around with you.

【CARBON FIBER BOX & TOP FLAG】SmallRig Mini Matte Box 3196 is designed for DSLR and mirrorless cameras to prevent sunlight or other light from causing glare and flare and to control the image on the screen. The adjustable carbon-fiber top flag blocks sunlight or strong light and also prevents internal reflections with its anti-reflective design. Moreover, it avoids vignetting in 15mm focal length shooting. (If you need a top & side flag, pls search "SmallRig 3597") | 【WIDE COMPATIBILITY】SmallRig 3196 fits various standard lenses such as 4 x 5.65" and round filters. Its clamp connector works with different adapter rings (optional model 3383 : Φ52-95mm; Φ55-95mm; Φ58-95mm; Φ62-95mm; Φ86-95mm, standard rings: Φ67-95mm; Φ72-95mm; Φ77-95mm; Φ82-95mm;) or attached directly to Φ95mm lens; its adapter ring fits round CPL, ND filter and other round filters of up to Φ92.5mm. Besides, it leaves enough space for quick disassembly and adjustment of the round filter. | 【MULTIPLE INSTALLATION 】The filter tray 3319 can be quickly and smoothly mounted onto matte box via a NATO clamp. SmallRig 3196 enables to install round filters and multiple 4 x 5.65" plug-in filters of up to 4mm in thickness at the same time, which meet your multiple filter needs. Besides, the filter tray 3319 provides all-around protection of the filter with multi-point silicone. It is easy to store and prevents scratches and fingerprints while replacing plug-in filters. | 【1/4"-20 THREADED HOLES】SmallRig Mini Matte box 3196 features 4 1/4"-20 threaded holes on the top. It allows attaching other SmallRig accessories such as Magic Arms 2065, etc. Furthermore, its anti-twist 1/4"-20 threaded holes on the bottom suits 15mm LWX Rod Support 2663, achieving a better shooting. | 【PORTABLE & COMPACT】The Mini Matte Box 3196 is made from durable but super lightweight carbon fiber material. Portable and compact, with only 125g(without adapter rings). It meets users' common shooting needs and easy for carrying outside.

Lighter and More Compact - Weighing Only 3.8 oz, SmallRig mini matte box 3575 fits small mirrorless or DSLR cameras, such as for Sony A7S III, for Canon R5/R6. The included carbon fiber top flag helps block veiling glare or bright reflections from striking your lens, and it can be folded down to cover the front of the matte box and provide protection to the front of your lens. | Wide Application - The matte box features a 95mm diameter opening, and the included 67, 72, 77, and 82mm threaded adapter rings allow you to use the matte box with lenses of different sizes and diameters. Furthermore, it avoids vignetting in 15 mm focal length shooting thanks to its new design. | Accepts Circular Filter - Its thread adapter ring fits round CPL, ND filters and other round filters of up to Φ92.5mm. Besides, it leaves enough space for quick disassembly and adjustment of the round filter. | Accepts 4 x 5.65" Filter - This matte box enables to directly install one 4 x 5.65" plug-in filters of up to 4 mm in thickness, and two or more filters with additional filter tray(no include). The included filter tray provides all-around protection with multipoint silicone, and prevents scratches and fingerprints while replacing. | Optional Accessories - Filter Tray (4 x 5.65) 3319; Filter Tray (4 x 4") 3320; 4x5.65 ND0.6 Filter 3588; 4x5.65 ND1.2 Filter 3589 | What You Get -1 x mini matte box lite, 1 x Φ67/72/77/82-95 mm adapter rings, 1 x built-in Filter Tray (4 x 5.65"), 1 x store pouch

【Adjustable Carbon Fiber Flags】SmallRig Mini Matte Box Pro 3680 is designed for mirrorless cameras to prevent sunlight or other light from causing glare and flare and to control images on the screen. The top flag opens 180° and its side wings extend 40° for additional light blocking; The side flag is attached to either the matte box or the filter tray via slots and opens 180° to block stray light. Note: The top flag cannot be closed shut when more than 2 filter trays are installed | 【Modular Design and Easy Installation】This mini matte box is designed with quick release modular and easy installation. It features one knob on top to fix the top flag in place, and one knob on the upper right corner to tighten the camera lens. It also comes with a storage bag for quick storage of the matte box and filter trays | 【Wide Compatibility】This mattebox is suitable for various adapter rings (Φ52-95mm, Φ55-95mm, Φ58-95mm, Φ62-95mm, 58-95mm, Φ62-95mm, Φ86-95mm, NOT included in package) and (Φ67-95mm, Φ72-95mm, Φ77-95mm, Φ82-95mm, included in package) as well as Φ95mm lenses. Its adapter rings allow quick release of circular filters (including CPL and ND) of up to Φ92.5mm | 【Two 4 x 5.65" Filter Trays Included】 It comes standard with two 4 x 5.65" filter trays, which can be quickly mounted via slots, and supports multiple plug-in filters at the same time | 【Related Accessories Recommended】 To secure lens and prevent shaking, SmallRig 15mm LWS Rod Support 2663 is recommended. If you need other filter trays, you could search "SmallRig 3320", "SmallRig 3319"; For ND filters, please go for "SmallRig 3588", "SmallRig 3589"

【Mini NATO Side Handle】SmallRig Mini NATO Side Handle 3813 is designed to reduce the burden on the arm when shooting, assist in transporting the mirror, and provide an accessory expansion interface. The bottom of the built-in magnetic wrench, ready to access, easy to disassemble. | 【SIDE HANDLE FOR CAMERA CAGE】There are 3 1/4"-20 threaded holes built into the top, which can be expanded ①Magic hand 2070, which can be connected to monitors and cold shoes; ②2260 can be connected to accessories such as microphones and flashes;There are wrist strap holes on both sides of the top, which can be connected to the wrist strap to increase the stability of the hand. | 【ERGONOMIC DESIGN】The handle material is made of aluminum alloy with built-in silicone patch, which conforms to the ergonomic design. The grip is comfortable, non-slip and anti-freeze. handle is a slide-slot interface, can be quickly installed in the side of the expansion frame with built-in slider, no built-in slider expansion frame, can be transferred by purchasing SmallRig slider 1409, 2172. | 【FOR RIGHT-HAND/LEFT-HAND USE】Highly adjustable to fit different cage height and support the quick switch from left-handed to right-handed through the built-in wrench. If you want to use it on the other side of the cage, just take off the connection part of handle and change the direction. Besides, you could slide up and down for your optional positioning. | 【WHAT YOU CAN GET】The package include 1 x Side Handle and 1 x Allen Wrench . If you have any questions, please feel free to contact us.

【Universal Side Handle】The Side handle is compatible with multiple SmallRig phone cage, such as SmallRig cage 3561(for iphone 13 Pro Max), 3562(for iphone 13 Pro), 3734(for iphone 13), 3563(for iphone Series), 3176(for iphone 12 Pro Max), 3175(for iphone 12 Pro), and universal cage 3155, CPU2391B, 2791, and CPU2494 for a great handheld shooting experience. | 【Multiple Mounting Options】Features a cold shoe mount on the top of the handle for attaching microphone or LED light for more professional shooting. And side handle comes with lanyard hole at the bottom for attaching hand strap to prevent accidental falling during shooting. | 【Up And Down Adjustable】The side handle can be moved up and down according to the center of gravity and position of accessories for a better grip experience. | 【Quick Switch from Left to Right Handle】The handle supports the quick switch from left-handed to right-handed through the wrench. If you want to use it on the other side of the phone cage, just take off the handle connector and change the direction. | 【Lightweight and Durable】It weighs only 109g. The surface of the handle is made of aluminum alloy with gradient anodizing, which makes it durable and visually impressive.

【FOR LIGHTWEIGHT CAMERAS】SMALLRIG Mini Top Handle HTH2759 is ergonomically shaped for enhanced gripping experience. It is very suitable in size for small cameras such as A7C, ZV-1, RP, M6 Mark II, etc., with SMALLRIG cages attached. | 【ASSEMBLY WAY】The handle attaches to the top of camera cages via two 1/4”-20 screws, and keep the setup compact for daily shootings. | 【MOUNTING POINTS】3/8‘’-16 locating hole for ARRI standard is compatible with accessories like SmallRig Monitor Holder BSE2348 and 2903. Cold shoe on the top is suitable for a microphone or a LED light, and it features an anti-off button so your devices will be safely attached. | 【EXQUISITE DESIGN】Weighing only 79g and with the low-profile design, it perfectly fits your small-sized cameras and keep the setup compact for daily shootings or vlogging. | 【NOTE】This handle serves mainly as a mini grip and maybe too small if you have very large hands, please kindly check other handles on the SmallRig store if you prefer larger ones. The color of this product is dark olive, NOT black.

【Versatile】 Thanks to the universal 1/4"-20 screw thread and phone tripod mount, SMALLRIG mini tripod can be used with a variety of devices, including iPhones, compact cameras, CSC and entry level DSLRs, Canon G7X Mark III Sony ZV-1 RX100 VII A6400 A6600. | 【Easy to Carry】The mini compact handheld tripod stand is only 7.2", small enough to fit into your camera bag, backpack or even pocket, easy to carry around for your trip | 【360° Ball Head】 The ball head is 360° rotatable, fit any angle you want and supporting vertical shooting. | 【Rubberized Handle】Featuring soft rubber on both the grip and feet, this design provides a comfortable feel as a handle grip and it enhances friction for improved stability when handheld or placed on a desktop. | 【Complete After-sales Service】SmallRig provides high quality products and perfect after-sales service, if you encounter any problems with the products, you can contact us at any time!

【Upgraded Design】: The ball head of SmallRig Mini Tripod is finely laser-engraved in 5° increments from -0°-330° for tracking progressive panning, 3 position leg angle adjustment system provides flexible shooting, ideal for multi-shot panoramic photography. PLEASE NOTE we do not recommend you to adjust the screws of the leg. It can only stand in place when the leg in 130°. If you want the tripod legs angle notches/locks, please turn to BUT2666(B0833XY83V) | 【QR Plate for Arca-Swiss 】: The mini tripod comes with a clamp compatible for Arca-Swiss and plate for quick release and mount. With rubber-padded mount QR plate to protect your camera from potential scratches | 【High Stability】: Made of aluminum alloy, The legs support up to 44 lbs and the ball head bears up to 4.4 lbs while weighing only 0.89 lbs. The rubber tripod feet prevent the mini tripod from sliding and protect delicate surfaces, which rival traditional spikes to stabilize the tripod on soft terrain | 【360 Degree Swivel Tripod Head】: Ensure 360 degree horizontal rotating and from -90 to +45 degrees tilting for panoramic photography when adjusting the angle | 【Solid Base Support】: The rubber feet prevent the mini tripod from sliding and protect delicate surfaces, which rival traditional spikes to stabilize the tripod on soft terrain

For DJI RS 3 / RS 3 Pro / RS 2 / RSC2 stabilizer: SmallRig V mount battery plate comes with a cold shoe mount for quickly mounting a V mount battery onto the bottom for DJI stabilizer, powering the camera, image transmitter, and wireless receiver motor with an extended power source. | Power Supply Plate: It features a standard V-lock to compatible with most of V mount batteries, such as SmallRig V mount battery VB50 3579 and VB99 3580. It also supports SmallRig NP-F battery Plate via the included mini V-mount plate with 1/4 "-20 threads. | Double Side Anti-off Design: This V mount battery plate comes with anti-off baffle and anti-off buckle, makes it safe and stable. | Compact & mini Size: Only 55.0 x 55.5 x 20.6mm, weighs 53g, mini and small, save place and easy to take around. | Note: This V mount battery is Incompatible with VB155 V Mount Battery (ID: 3581).

【MINI V-LOCK BATTERY PLATE】SmallRig Mini V Mount Battery Plate with Crab-Shaped Clamp 2989 utilizing a standard V mount fits most V mount batteries to provide greater battery life for your camera rig with your battery's power port(s). | 【CLAMP FITS 0.6 TO 1.2" SURFACE】SmallRig 2989 comes with a crab-shaped clamp that fits rod diameter from 15mm to 30mm to help mount a V mount battery to a tripod, a light stand, or a handheld ring for gimbals. It is constructed with durable aluminum and weighs only 2.2 oz. The mini shape design makes it lighter and more portable. | 【MULTIPLE MOUNTING POINTS】The plate itself features two 1/4-20" countersinks, two 1/4-20" thread holes, and four M4 thread holes, which can be used to attach a dual rod clamp, a magic arm, or other accessories, will help mount a V mount battery to your camera rig as needed. | 【COMPATIBILITY】The mount features a V-lock mount with a quick release lever that fits most V-mount batteries but it is not compatible with PAGlink series V mount batteries and it is not compatible with Patona Premium Battery for BP-190WS. The mount has no electronics and is meant to mount a battery that has its own power outputs to power your gear. | 【PLEASE NOTE】1. No V-Lock part (male) provided with the plate. 2. In order to achieve the maximum compatibility of the crab-shaped clamp, avoid installing the crab-shaped clamp in the center of the plate (refer to the picture for installation form). 3. This is purely a mounting solution for a V-mount battery — no power ports on the plate.

[For Atomos Shinobi 7]: SmallRig 3456 Cage is designed to provide all-around protection and various accessory mounting points for Atomos Shinobi 7. In addition, it will not block any access to buttons, ports, LCD screen. | [Multiple Mounting Pionts]: Features multiple 1/4"-20 and 3/8"-16 thread holes for easy attachment of accessories. Built-in four shoulder strap holes that fit ID: 2793, making it easy to carry the monitor over your shoulder and quick to remove the strap. | [Quick Release Function]: NATO rails are provided along on top and bottom to allow use with a range of SMALLRIG products for quick release.Such as monitor mount (ID: 2116, 2071, 2028, 2385, 2347) and baseplate (ID: 1598, 3204, 2107) on the top for V-mount battery and wireless image transmitter. | [Cable & Screen Protection]: The cage includes a cable clamp to protect the HDMI cable and port. The kit also includes a quick-absorbing and bubble-free screen protector to protect the monitor screen from fingerprints, water spray, dust, scratches, and knocks. | [What You Get]:1 x Cage for Shinobi 7, 1 x Cable Clamp, 1 x Screen Protector for Shinobi 7, 1 x Sun Hood, 2 x Allen wrench

▶ OPEN TO 40MM： It is a Multi-Function Double Ball Head with bottom clamp and 1/4" screw, the clamp jaws open to 40mm. It could attach monitor or video light on the other end, while clamps the accessories with diameter less than 40mm, like stabilizer for DJI , stabilizer, video C-stand etc | ▶ LOCK TIGHT：It can mount Monitors and led Lights to DSLR, 360 degree Articulation when shooting, this ball head has a single locking knob for fast and safe operation, 1/4" Screw on the top | ▶ DIRECT MOUNTING：Can be mounted directly to a DSLR or camcorder's shoe mount and mounted directly to any rods, tube up to 40mm diameter, and allows for the attachment of a full array of video accessories | ▶ MULTIPLE ACCESSORIES ATTACH：Can also be used as for GoPro mount on motorbike or hold a microphone on a boom arm, mount of small cameras, monitors, compact cameras, phones, flashes, handheld gimbals and other devices, sush as for GoPro cameras , Nex mirrorless cameras for Sony , RX100MK4 etc | ▶ ERGONOMIC AND SOILD：Made of nearly all metal ( aluminium alloy ), solid and sturdy, also with a protective dense rubber pad on clamp area to prevent scratches and the whole arm can be taken off

?Install Way?SMALLRIG BUN2521 attaches to other accessory mounts for ARRI by using a 3/8?-16 screw and two locating pins | ?Quick Release?The NATO Rail compatible with NATO clamps or other accessories features NATO clamp for quick release. For example, SMALLRIG Magic Arm 2071, NATO Clamp 1973, NATO Handle 1995/2187. | ?Anti-off?The spring-loaded safety pins on both ends prevent your devices from accidentally sliding off. | ?Light Weight?The NATO Rail is made of aluminum alloy. Length of 48mm, weighs only 27g. | ?Other NATO Rails?If you prefer other NATO Rail mounting options, we have SMALLRIG NATO Rail BUN2468(50mm), NATO Rail BUN2483(70mm), NATO Rail BUN2484(90mm), NATO Rail BUN2486(150mm).

【Wide Compatibility】SmallRig 7cm NATO Rail is compatible with standard NATO accessories for quick release, such as clamps, handles and monitor holders, enabling you to quick attach and release the rig components. | 【Anti-Off Design】The safety pins on both sides prevent your NATO accessories from accidentally sliding off. | 【Easy to Use via Two 1/4" Screw】 It can be attached to any accessories with two 1/4-20 holes via two 1/4-20 screws (included) to provide a mount for QR handle, EVF mount, NATO clamp, and camera plate, etc. | 【Related Products】It works with items with NATO clamp, such as SmallRig 2906B, nato clamp 1973, etc. | 【Product Information】Package Include: 1 x NATO rail, 1 x hex spanner, 2 x 1/4'' screw. Material(s): Aluminum Alloy.

[BALANCE ADJUSTMENT] Unique design top handle 1955 can provide a balanced gripping point for your camera or camcorder. The handle features both forward-to-back and side-to-side adjustment to help balance your camera rig. | [QUICK RELEASE] The DSLR NATO Handle can quickly mounts to a standard NATO rail without any tools. It has been upgraded to resolve an issue where the NATO clamp was not compatible with some NATO rails. It can work with SmallRig NATO rail 1409 (Not included) and quick attaching and detaching via the thumbscrew. | [MULTIPLE MOUNTING POINTS] The camera handle features two cold shoe mounts, multiple 1/4"-20 and 3/8"-16 threads, and two locating holes for ARRI-style. | [EXCELLENT DESIGN] The handle comes with an allen wrench on the side, which attaches via magnet inside the handle. And you can loosen the screws on the side to change front to back orientation of grip according to your need. | [NOTE] The grip part is only 118mm long, so it may be a bit short for someone who has a big palm.

Only to Start / Stop Recording: NATO top handle 3322 is designed to provide convenient record start/stop control for a stable and comfortable shooting experience. With an ergonomic design, the handle features a silicone gel record button on top where the thumb rests | Compatibility: The handle is compatible with multiple selected cameras, such as for Sony A7 / A7R / A7R V / A7S / A7II / A7RII / A7SII / A7SIII / FX3 / FX30 / A7III / A7RIII / A7 IV / A7R IV / A9 / A9 II / A5100 / A6000 / A6100 / A6300 / A6400 / A6500 / A6600 / RX100 III / RX100IV / RX100V / RX100 VI / RX100 VII, for FUJIFILM X-T3 / X-T4 / X-T20 / X-T30, for Panasonic S5 / S1 / S1R / S1H / BS1H / GH4 / GH5 / GH5S / GH6 / G9 / G95, and for Z CAM E2 / M4 / S6 / BGH1 | Multiple Mounting Points: The handle comes with multiple 1/4"-20, 3/8"-16 threaded holes, 3/8"-16 locating holes for ARRI standard, and cold shoes for mounting accessories. For example, the front cold shoe mount can work with Monitor Mount 2346. The front end comes with an 3/8"-16 locating hole for ARRI standard for Monitor Mount 2348 | Quick Switch: The handle can quickly secure to a cage with integrated NATO rail or work with NATO Rail BUN2468 to increase compatibility | NOTE: 1. The handle can only be used to control the recording, not to control taking pictures or focusing.

SmallRig Night Eagle Cage for Nikon Z 6III 4521

Brand-new Design: SmallRig Z6III cage kit is a full cage specifically designed for Nikon Z6 III. This product features a brand-new design with innovative curves, sleek golden accents, and a unique gunmetal brown. These elements not only enhance its visual appeal but also provide reliable protection for your camera, giving it a fresh and rejuvenated look. | The New Press and Flip Design: The design of cable clamp allows you to open the interface cover without disassembling it to save time. It also prevents accidental cable disconnection and ensures stable transmission. | Multiple Mounting Points: The Z6 III Cage has multiple 1/4"-20 holes and 3/8"-16 locating holes for ARRI, which can attach top handle 3765 and side handle 4015; the NATO rail on the left quickly connects NATO Side Handles 3847 & 4017. Besides, there are strap holes for Hand Straps 3848 & Wrist Strap PAC2456; and a QD socket for the QD strap buckle. | Quick Switch: The quick-release plate for Arca-Swiss at the bottom, can be quickly installed to the tripod for Arca and stabilizer for DJI RS 2 / RSC 2 / RS 3 / RS 3 Pro, for a quick switch between gimbal and tripod shooting. | Triple-Point Locking: The camera firmly secures for Nikon Z 6III via a bottom 1/4 "-20 screw and two M2.5 screws on both sides. A magnetic wrench at the bottom of the cage is accessible at any time for easy disassembly and assembly. | Detachable Cold Shoe Mount: Equipped with a detachable cold shoe adapter that can be installed on both sides and top of the expansion frame to freely expand microphones, fill lights, etc. Built-in positioning pins at the bottom of the cold shoe. Note: Please remove the shoulder strap on both sides of the camera before installing the cage.

Brand-new Design: SmallRig Z 8 cage is a full cage specifically designed for Nikon Z 8. This product features a brand-new design with innovative curves, sleek golden accents, and a unique brown color palette. These elements not only enhance its visual appeal but also provide reliable protection for your camera, giving it a fresh and rejuvenated look. | The New Press and Flip Design: The design of cable clamp allows you to open the interface cover without disassembling it to save time. It also prevents accidental cable disconnection and ensures stable transmission. | Ergonomic Handle: The ergonomically designed handle brings you a comfortable grip experience and the top handle can store commonly used screws (such as 1/4”-20, 3/8”-16, m2.5) | Detachable Cold Shoe Mount: Equipped with a detachable cold shoe adapter that can be installed on both sides and top of the expansion frame to freely expand microphones, fill lights, etc. | Multiple Mounting Points: The Z 8 Cage has multiple 1/4"-20 holes and 3/8"-16 locating holes for ARRI, which can attach top handle 3765 and side handle 4015; the NATO rail on the left quickly connects NATO Side Handles 3847 & 4017. Besides, there are strap holes for Hand Straps 3848 & Wrist Strap PAC2456; and a QD socket for the QD strap buckle. | "Note 1. Please remove the shoulder strap on both sides of the camera before installing the cage 2. Compatible with for Nikon WR-R11a Remote Controller"

Compability: The windshield is compatible for Nikon Z 30 ,for Sony FX3 / FX30. It can be used with SMALLRIG Baseplate for Nikon Z 30 3857, SMALLRIG Cage for Nikon Z 30 3858 and SMALLRIG L Bracket for Nikon Z 30 3860. | Windproof & Noise-Reduction: It is designed with selected synthetic fabric for reducing wind noise in outdoor scenes, which brings you crystal-clear audio recordings and superior sound quality. | With Cold Shoe Mount: There is a cold shoe mount on the top of the adapter, which allows it to be compatible with devices with cold shoe mounts, such as SMALLRIG LED Video Light 3405, P96 LED Video Light 3286. | Built-in Rubber Cushions: The built-in rubber cushions on the bottom can protect the hot shoe of your camera and ensure the secure installation. | Lightweight & Durable: The furry windshields is made of nylon and fiber, which is tough and durable. In addition, it only weighs 5g, which is easy to carry out everywhere.

Widely Compatibility: SmallRig NP-F battery adapter plate 3168B is designed to enable NP-F batteries on the market, such as NP-F970, NP-F550, NP-F770, etc.(including original batteries for Sony and third-party batteries). It can provide a better power solution for BMPCC 4K, 6K, 6K Pro, for Canon R5 C and for various mirrorless cameras. Self-locking button for quick and secure battery installation and a 1/4''-20 threaded hole for easy attachment to the cage or handle. | Dual DC Outputs: The NP-F battery adapter plate comes with DC 7.4V and 12V output, compatible with DC 5521 and DC 5525 cable and dummy battery, Maximum DC output power up to 22W and 36W, meets multiple devices needs. Note: DC7.4V output power will decrease as the battery power decreases. | USB-C Input/Output Port: This NP-F battery mount plate features a USB-C interface, supports bi-directional input and output with 36W power, which can output current or charge an NP-F battery. Comes with USB-C mode and power indicators for easy viewing of charging and state of charge, orange for slow charge / slow discharge and blue for fast charge / fast discharge. | Well-made Material: The NP-F battery plate made of premium aluminum alloy for better durability and great quality. With gold-plated electrical contacts make it more stably and conductive. A rubber pad on the bottom to prevents scratch from your cameras and devices. | Automatic Wake-up and Sleep Modes: Just plug and play, no need power button to turn it on, each output port features short circuit and high current protection to avoid damage to the camera. With 4 LED lights to check battery connection, and battery life. | SmallRig NP-F Battery: If you are looking for some Sufficient battery, you can have a look SmallRig NP-F970 Battery and Charger Set 3823(Asin:B09Z76756B), or SmallRig USB-C NP-F970 Battery 4267(Asin:B0CH9JP6WJ) and SmallRig NP-F550 Battery 4331(Asin:B0CH9KCK7Z).

Widely Compatibility: SmallRig NP-F battery adapter plate 4341 is designed to enable NP-F batteries on the market, such as NP-F970, NP-F550, NP-F770, etc.(including original batteries for Sony and third-party batteries). It can provide a better power solution for Sony FX3 , FX30 , A7CR , A7C II, A7 IV , ZV-E1 cameras. Self-locking button for quick and secure battery installation and a 1/4''-20 threaded hole for easy attachment to the cage or handle. | With NP-FZ100 Dummy Battery: This NP-F battery adapter plate kit comes with a DC5521 to NP-FZ100 dummy battery power cable, suitable for Sony A7 III, A7 IV, A7S III, A7R III, A7R IV, A7R V, A7C, A7C II, A7CR, A1, A9, A9 II, A6600, A6700, FX3, FX30, ZV-E1. | Dual DC Outputs: The NP-F battery adapter plate comes with DC 7.4V and 12V output, compatible with DC 5521 and DC 5525 cable and dummy battery, Maximum DC output power up to 22W and 36W, meets multiple devices needs. Note: DC7.4V output power will decrease as the battery power decreases. | USB-C Input/Output Port: This NP-F battery mount plate features a USB-C interface, supports bi-directional input and output with 36W power, which can output current or charge an NP-F battery. Comes with USB-C mode and power indicators for easy viewing of charging and state of charge, orange for slow charge / slow discharge and blue for fast charge / fast discharge. | Well-made Material: The NP-F battery plate made of premium aluminum alloy for better durability and great quality. With gold-plated electrical contacts make it more stably and conductive. A rubber pad on the bottom to prevents scratch from your cameras and devices. | Automatic Wake-up and Sleep Modes: Just plug and play, no need power button to turn it on, each output port features short circuit and high current protection to avoid damage to the camera. With 4 LED lights to check battery connection, and battery life.

【HIGH CUSTOMIZATION】SmallRig 3018 is designed to provide greater battery life for your camera rig via an NP-F battery for Sony. You can mount the plate to the camera rig using a 1/4“-20 thumbscrew or two 1/4”-20 hex screws. | 【TWO DC OUTPUTS】The NP-F Battery Adapter Plate provides different output ports, including a 12V DC (5.5/2.5mm) output port and a 7.4V DC (5.5/2.1mm) output ports, greatly extending shooting time, the maximum power is 24W. If you need DC5521 to LP-E6 Dummy Battery Charging Cable for LP-E6 Battery, pls search" SmallRig 2919". | 【LOW BATTERY REMIND LED】It features an LED indicator that will turn red color when the battery level is less than 30 percent. When the indicator flashes, it means the battery level is less than 10 percent, and you need to replace the battery. | 【SWEET DESIGN】The plate features a rubber pad on the bottom for a more stable installation. | 【PRODUCT INFORMATION】 Package Includes: 1 x NP-F Battery Adapter Plate; 2 x 1/4”-20 Mounting Screw; 1 x Allen Wrench; Material(s): ABS+PC. | 【PLEASE NOTE】This product does NOT include charging cables and NP-F battery. And this battery adapter plate is Not fits for BMPCC 6K / 6K pro.

How to Use: ①Connect the dummy battery, the adapter, and the AC cable in sequence, and power on; ②Insert the powered dummy battery into the camera battery compartment correctly; ③Close the battery compartment cover. Please follow the installation steps when using. If the camera battery compartment is not closed, the dummy battery will not work normally. | Wide Compatibility: This NP-FZ100 dummy battery replaces for Sony NP-FZ100 and works for Sony Alpha A7 III, A7 IV, A7S III, A7R III, A7R IV, A7R V, A7C, A7C II, A7CR, A1, A9, A9 II, A6600, A6700, FX3, FX30, ZV-E1. Fully decoded battery, you don't need to worry about the warning pop-up that the battery will damage the camera. | Continuous Power Supply: This dummy battery power supply kit can continuously power the camera. This means that you don't have to worry about changing the battery or the battery overheating and losing power because of recording for a longer time. It is a good choice for video conference, live streaming, time-lapse photography, live broadcast, extending studio sessions, uploading files to PC and more. | Super-Long Cable: The cable is made of pure copper with high conductivity and coated with durable PVC, which can withstand frequent bending and curling. The length of the cable is 10.85 feet / 331 cm, so that you can move and position your camera without hindrance. | No Warning: Fully decoded battery, you don't have to worry about the warning pop-up that the battery will damage the camera, same size as the original NP-FZ100 camera battery, so there is no need to worry about it getting stuck. | Safe & Reliable: Overvoltage, overheating, and overcharge short-circuit protection alongside fire-resistant PVC and ABS make this item safe and reliable.

Professional Soft Light Panel: With side light-emitting design, the light is soft and not harsh, making your face look better. 192 high color rendering lamp beads, 2000Lux, CRI 98+/TLCI 98+, color temperature 2500-6500K adjustable, comes with 9 lighting effects. P200 panel can adapt to different streaming environments and can help you create the lighting effects you like. | Easy To Use: Integrated adjustment panel, ultra-clear LCD screen, red one-touch "BEAUTY-ON" button to memorize selected parameters (brightness/color temperature) for instant retrieval later. Everything is designed to make it easy for you to use. | Diverse Power Supply: P200 can use 2 types of power supply: NP-F lithium battery supply and USB-C power supply, you can use NP-F battery, power bank or adapter power, whether it is indoor or outdoor, can be useful. | Sleek Yet Compact, Easy To Carry: Perfect 10" size, extremely narrow bezel, slim panel (18mm / 0.7in), carry with you anytime, anywhere. | Fun Features: P200 providing you with multiple lighting modes to suit your needs. Lighting effects include: lightning, TV, candles, bad light bulbs, breathing lights, paparazzi and more | Full-Function Ecosystem: SmallRig has a wide range of products to match the P200 light, mini tripod (BUT2429), DT-10 Camera Desk Mount (ID: 3488), DT-30 Desk Mount (ID: 3992), V Mount Battery Plate (ID: 2989), V Mount Battery, NP-470 Camera Battery (ID: 4073). | What You Get: SmallRig P200 light panel, 1.5m usb-c charging cable, user manual, our worry-free 12-month warranty, and friendly customer service.

6-Step Counterbalance Adjust: The professional fluid head features an adjustable 6-step dynamic counterbalance system (1, 2, 3, 4, 5, 6). The counterbalance system support to balance the camera or other rigs (Weight: 1-8 kg/2.2-17.6lb) and ensure that it can be firmly positioned at any tilt angle, providing an extremely smooth shooting experience. | 4-Step Hydraulic Damping: The adjustable 4-step hydraulic damping system enables pan (1, 2, 3, 4) and tilt (0, 1, 2, 3) adjustment and provides smooth pan and tilt camera movements. It can be tilted +90° or -60° and swiveled 360° for multi-angle shooting. | Compact and Rubust: The video head is lightweight and compact; it features 14cm / 5.51inch) in height and weighs only 1.8kg / 3.9lb, but it can carry a payload up to 8kg / 17.6lb. CNC-machined aircraft-grade aluminum tripod head, making it durable. | Quick Mode Switching: This heavy fluid head different from traditional slide-in release plates, has a newly designed on-click quick-release plate mount and can realize quick assembly. Also, it is compatible for Manfrotto quick release plate to realize a free switch. | Detachable Telescopic Handle: It is equipped with a user-friendly detachable telescopic handle, allowing rotation and attaching it to both the left and right sides, making it suitable for any grip. The handle adjusted length is 35 - 53 cm / 13.8 - 20.9in.

Reliable Air Cushion Design: SmallRig Light Stand 3736 features reliable air cushion, which effectively prevents sudden drops and finger pinch during height adjustment. It enhance safety and stability for photo and video shooting. | Firm Construction & Excellent Load Capacity: Free to adjust height from 94cm to 280cm, SmallRig Studio Light Stand 3736 is suitable for different shooting scenarios with high load-bearing capacity up to 8kg. The iron support bar is 2.66mm thick and 15mm wide, and the connection parts are all metal which is more strong and reliable. | Efficient On/Off Flip Lock: The non slip flip lock is flexible and simple to use, which greatly increases the use experience while ensuring the safety of lighting equipment. Distance between legs at maximum extends to 1.2m for added stability. | Multiple Usage Scenarios: SmallRig 3736 comes with a stainless steel 1/4" thread adapter, more reliable compared to aluminium alloy material. It is highly compatible with DSLRs, LED video lights, ring lights, reflectors, softboxes, and other devices. The plane cutting brings more secure accessory connection. | Quality Assurance: SmallRig provide 2-Year product warranty for our photography light stand. Contact us freely if any issue occurs, we will offer proper solution for you at the first time.

【Only For DJI RS 3 Mini】SmallRig Sling Handle 4197B is specially designed for DJI RS 3 mini gimbal. This briefcase handle is designed to reduce arm fatigue during low angle shooting and mounted it onto RS 3 mini would not shift the center gravity. | 【180 Degree Adjustment】Offering 180° adjustment via a built-in rosette joint, this ergonomic handgrip gives you the flexibility you need to shoot from a variety of angles, and it helps take the load off your arm. This gimbal handle for DJI Ronin RS 3 mini has a pretty good and sturdy grip. | 【Portable and Compact】The compact handgrip weighs only 220g but can bear as much as 6kg. And low-angle shooting makes the arm easier and the camera moves more freely. It's really compatible gimbal looking for extra stability or to lower it down to underslung / briefcase mode. | 【Quick Release Clamp】The grip mounts onto the gimbal using a NATO clamp. Also, the quick release NATO rail features an anti-removal stud to ensure a safe and quick operation. The delicate and compact handgrip works perfectly with the gimbal which is a comfortable accessories for DJI RS 3 mini . | 【Multiple Mounting Points】Multiple 1/4"-20 threads are built-in on the handgrip which allows for mounting Magic Arm 3873. With two cold shoe mounts on top and side of the handgrip, it can be mounted with Monitor Mount 2905B, wireless receiver, video transmission and other equipment. | 【Updated Version】This updated newly release 2024 version perfectly resolve the slippy problem.

360° Rotatable: With one button press, the universal NATO side handle can rotate 360° in both directions, allowing for comfortable camera movement at any angle. | Highly Versatile: The rotatable handle is compatible with cages with a standard NATO rail. The side handle is designed with comfortable ergonomics and can be used with both hands. | Anti-Slip Silicone: The grip is covered with silicone, whose surface adopts a sun-textured process, featuring better anti-slip and anti-freezing effects, making the handle more comfortable and labor-saving to hold. | Multiple Installation Points: The side handle has built-in 1/4"-20 threaded holes, positioning hole for ARRI, wrist strap hole, cold shoe, etc., which can attach accessories such as Monitor Support 2905B, Magic Arm 3875, LED Video Light 3286B, Microphone 3468, etc. Built-in magnetic hexagonal wrench for easy adjustment of adapters. | 15kg Maximum Load-bearing Capacity: The ergonomic handle is made of aviation-grade aluminum alloy, with a load-bearing capacity of 15kg, and is sturdy and enduring.

Exclusive QR-Slide Patented Structure: The two sides of the quick-release magic arm features roll pins positioning technology with a self-locking system, which can be locked after sliding in. It also support bi-directional mounting and dismounting with a self-locking system. | Anti-twist Detachable Pins : This Magic arm with the detachable locating pins at both ends to prevent twisting. The locating pins are detachable spring designs, whcin can be mounted on SmallRig camera cages 4119B, 3084C, 4088B, and monitors with similar locating hole specifications, effectively prevents equipment deviation, ensuring the safety of the equipment. | 12.2lbs Payload : The QR magic arm only weighs 0.13kg/ 0.3Ib (138g), but can load up to 5.5kg / 12.2lbs, which can fix your field monitor, LED lights, audio recorders, etc. | Flexible Adjustment : The camera magic arm support flexible adjustment through the thumb lever. With slots at both ends of the ball head clamp, it can increase the adjustment range of the ball head, allowing for flexible positioning of the equipment as needed. | HawkLock QR Ecochain: Using with our HawkLock Ecochain can enhance your shooting experience,such as Quick Release Advanced Cage Kit for Sony Alpha 7RV/ Alpha 7 N/ Alpha 75 III (ID:4539); H21 Quick Release Top Handle Kit (ID:4483); H21 Quick Release Rotating Side Handle Kit (ID:4485); H21 Quick Release Monitor Support with NATO Clamp (ID:4487); H38 Quick Release Mount Plate for Arca-Swiss (ID: 4486); H18 Quick Release Support with Cold Shoe (ID:4500); H21 Universal Quick Release Mount Plate Kit (ID:4491); H21 Quick Release Rosette Magic Arm (11") (ID:4489); H21 Quick Release Rosette Magic Arm (7") (ID:4490)

Wide Compatibility: The quick release plate features a 1/4"-20 screw supports devices such as camera, monitor, cage, light, etc. And the quick release plate is reserved for 2 optional dowel pins, which can be removed and installed as needed to effectively prevent the devices from deflection. It also has a 1/4"-20 threaded hole on the bottom to allow attaching devices with 1/4"-20 screw (NOT over 6mm), like super clamp, tabletop tripod, ballhead, etc | Top Plate & Base Plate: The mini quick release plate kit comprises a quick release top plate and a baseplate. Quickly locked and unlocked through a click without jamming. Allows you to release and lock cameras, smartphones, monitors, and lights in a second instead of screwing, greatly save your time | Safer & Faster: SmallRig quick release plate features dual locking structure inside the baseplate, provides high load capacity of 5 kg. The quick release top plate can buckle vertically and stably into the baseplate, causing not deflection. Vertical installation is faster and solid than traditional slide-in installation | Durable & Reliable: The quick release camera mount made of Aluminum alloy, only 37g, mini size and super lightweight, sturdy and durable for a long use. Maximum dynamic load capacity of 5 kg, supports most devices in the market. With built-in rubber pads, protect against deflection and scratches | Patented HawkLock QR Ecosystem: To improve your usage experience, we've released a convenient HawkLock ecosystem of well-designed and high-quality quick release accessories, such as QR Plate kit 3513, Cold Shoe Monitor Mount 3514, Magic Arm 3515, NATO Monitor Mount 3601, QR Top Plate 3730, QR Baseplate 3731, Ball Head 3600

For DJI Selected Stabilizers: The quick release plate for Arca is specifically designed for DJI RS 4 / RS 4 Pro / RS3 / RS 3 Pro / RS 3 mini / RS 2 / RSC 2. Camera cages with H38 quick release plate for Arca at the bottom can slide directly into SMALLRIG 4639, for example: SMALLRIG Cage for Sony A7R V/A7 IV/A7S III/A7R IV/A1 - 4481 | Lower Center of Gravity: The overall center of gravity is lowered by 9.5mm, making it easier to level on the RS 3 mini. It can be compatible with heavier cameras, such as for Sony FX3 + 24-70mm lens, for Canon R5 + 24-70mm lens, for FUJIFILM X-T5 + 16-55mm lens, for LUMIX GH6 + 12-60mm lens can all be installed on the RS 3 mini | Quick Release Structure: The HawkLock H38 quick release clamp for Arca on the top adopts exclusive roller-assisted disassembly and assembly, and self-locking one-button slide, without secondary reinforcement. The quick release plate for Arca on the bottom has a dedicated slot for swift mounting of the RS 3 mini stabilizer | Anti-deflection Design: The quick release plate for Arca on the top has an anti-deflection design, making the camera more securely mounted | Safety Lock Pin: The quick release clamp for Arca on the bottom has an adjustable anti-drop safety lock pin to prevent accidental toggling of the trigger and causing the device to fall

Wide Compatibility: The quick release plate features a 1/4"-20 screw supports devices such as camera, monitor, cage, light, etc. And the quick release plate is reserved for 2 optional dowel pins, which can be removed and installed as needed to effectively prevent the devices from deflection | Top Plate for SmallRig HawkLock System: This quick release top plate is the top part of SmallRig HawkLock Quick Release plate kit, and works with SmallRig quick release system 3731, 3513B, 3514B, 3515B, 3600B and 3601B | Durable & Reliable: The quick release camera mount made of Aluminum alloy, only 15g, mini size and super lightweight, sturdy and durable for a long use. Maximum dynamic load capacity of 5 kg, supports most devices in the market. With built-in rubber pads, protect against deflection and scratches | Time-saving: It snaps vertically into the HawkLock baseplate 3731( buy separately). The drop-in quick release structure makes it easy and stable to lock and unlock, suitable for multiple scenarios | Package Includes: 1 x Quick Release Top Plate; 2 x Allen Wrench

COMPATIBLE: This 46mm NATO Rail is compatible with standard NATO accessories for quick release, such as clamps, handles and monitor mounts, enabling you to quick attach and release the rig components | ANTI-OFF DESIGN: The safety pins on both side prevents your NATO accessories from accidentally sliding off | MOUNTING OPTIONS: It can be attached to any accessories with two 1/4-20 holes via two 1/4-20 screws (included) to provide a mount for NATO handle, EVF mount, NATO clamp, and camera plate, etc | RECOMMENDATION: If you prefer other NATO Rail lengths options, we have SMALLRIG NATO Rail 1134(100mm), NATO Rail 1195(70mm) | INCLUDES: 1 x NATO rail, 1 x Allen wrench, 2 x 1/4'' screw. Material(s): Aluminum Alloy

【One-Second Disassembly and Assembly】The quick release adapter of the handle can be quickly connected to SMALLRIG Universal Quick Release Mobile Phone Cage 4299 and the SMALLRIG Cage for iPhone 15 Series, allowing you to start shooting smoothly. | 【Switchable between Top Handle and Side Handle】By connecting the handle adapter to the horizontal slot of the cage, the side handle can be converted into a top handle, adapting to more shooting scenarios. | 【Built-in Cold Shoe】After disassembling the cold shoe cover, the handle's built-in cold shoe can be used to connect an external microphone or LED video light, making mobile phone shooting more professional. | 【Comfortable Grip】The handle adapter can be adjusted up and down according to the center of gravity and position of the device for a better holding experience. | 【Included Hex Wrench】The hex wrench is magnetically fixed to the bottom of the handle and locked with a decorative cover, making it stable and portable.

Dedicated Cage: SmallRig R10 Cage 4004 is a bionically designed, streamlined, and form-fitting aluminum cage that protects your camera body. It maintains full access to top controls of the camera. | Anti-Twist Design: The camera firmly mounts onto this cage with a 1/4"-20 screw. It incorporates an anti-twist design using two side locks, and has padding on the base to protect your camera from scratching. | Plentiful Mounting Points: SmallRig R10 Camera Cage features 1/4"-20 threaded holes, 3/8" -16 locating hole for ARRI standard, cold shoe mount and NATO rail for various expansion solutions. The built-in QD socket on the bottom is available to attach the quick disconnect strap system. | Quick Switch Design: Built-in quick release plate for Arca at the bottom is compatible with RS 2 / RSC 2 / RS 3 / RS 3 Pro, enabling quick switch among handheld, stabilizer, and tripod shooting | Suggested Products: SmallRig Side Handle 2916 and 3814; Top Handle 3786 and 3765; Monitor Mount 2903; Magic Arm 3515 and 2070; Holder for Portable Power Banks 2336; Rod Clamp 3598, etc

【Form-fitting R5 R6 R5 C Cage】The R5 R6 R5 C cage is designed for Canon R5 R6 R5 C mirrorless camera, which uses the new design and possesses clear outlines around the grip, maintaining full access to the camera's controls | 【Multiple Mounting Options】 SmallRig R5 , R5 C cage / R6 cage has locating holes for ARRI, 1/4"-20 and 3/8" -16 threaded holes for attaching accessories and a cold shoe mount, which allows attaching microphone or light | 【Full Access Buttons】SmallRig R6 cage / R5 cage / R5 C cage uses the new design with streamlined structure and possesses clear outlines around the grip, maintaining full access to battery compartment, SD card slot, all ports and buttons of camera | 【Secure Mounting】The R5 R6 R5 C cage locks onto the camera via a 1/4”-20 screw and two locating pins to prevent twisting; Built-in rubber pad protects your camera against scratches | 【Easy Access and Disassembly】Integrated swiss plate for Arca on the bottom for tripod mounting. A screwdriver is built into the bottom of the cage for easy access and disassembly | 【Power Backup Solution】SmallRig LP-E6NH camera battery charger set is available now, two 2040mAh(Real) rechargeable batteries and a charger brings long battery life for your videos and photos shooting, if you need a sufficient power supply, please search SmallRig LP-E6NH Battery 3821

Stable and Anti-deflection:R5 R6 R5 C cage is secured by one screw at the bottom and shoulder strap slots on both sides, making it stable and non-deflective, and features inside silicone cushions to protect the camera against scratches. | Multiple Mounting Points: Comes with 1/4''-20 & 3/8''-16 threaded holes for attaching such accessories as a side handle 2093, top handle 1984 and magic arm with ball head 2070, one top 3/8" -16 locating hole for top handle 2165, and cold shoe that supports microphones and LED lights. | Compatibility: SmallRig Cage 3464 is design for Canon R5 / R5 C & BG-R10 Battery Grip and R6 & BG-R10 Battery Grip,which protects the camera while facilitating videoing with its multiple accessory mounting points. | With Strap Holes: The front end has a hole for single rod clamp 3276 to connect a follow focus. The cage also fits the hand strap PAC2456, wrist strap PSW2398, and shoulder strap PSC2428. | Integrated Swiss Plate for Arca: Integrated Swiss quick release plate for Arca works with RS 2 / RSC 2 / RS 3 / RS 3 Pro and tripods.Built-in spanner at the bottom helps remove screws.