▲ADJUST ALL ANGLES▲ Features a wingnut in the middle to adjust the angles and positions of monitor or video light or other accessories. It supports rotation of any angles | ▲LOCK TIGHT▲ Tightened with a wingnut quickly and conveniently. It is easy to use and can help you lock tightly. Needn’t worry about dropping | ▲NOTICE▲ Not recommend for monitor or LED light over 1.0 kg | ▲1/4 SCREWS▲Equipped with 1/4” screws at both ends. It could attach camera cage, top plate and Top Handle 1955/1984 on the one end, while attach monitor or video light on the other end | ▲SMALLER MODEL▲ This is the smaller model of SMALLRIG Magic Arm with Small Ballhead 2163. If you need a bigger one, please check the SMALLRIG 2163

【HIGH CUSTOMIZATION】SmallRig Wooden Mini Side Handle 2913 is designed for the cages of mirrorless, digital camera, and other small cameras. Two 1/4"-20 screws are fixed to the side of your camera cage. SmallRig 2913 is compatible with any cages featuring two 1/4"-20 threaded holes with 18mm distance on the side, such as SmallRig Cage 2087, 2808, etc. | 【ERGONOMIC DESIGN】Made of aluminum alloy and rosewood with ergonomic design, the portable handle provides filmmakers with smooth and comfortable shooting experience. ( Note: Deviation of wood grain color and stripe is normal. ) | 【FOR RIGHT-HAND OR LEFT-HAND USE】The SMALLRIG Mini Handle 2913 supports you to switch from left-handed to right-handed quickly through the built-in wrench. If you want to use it on the other side of the cage, just take off the connection part of handle and change the direction. Besides, you could slide up and down for your optional positioning. | 【MOUNTING OPTIONS】The flash and microphone can be mounted through the cold shoe, and the wrist strap, such as 2456, can be mounted through the eyelet to prevent the camera from accidentally falling off. | 【LIGHTWEIGHT & PORTABLE】It weighs only 142g. This wooden handle serves as a mini grip, please kindly check other handles on amazon if you prefer larger ones. ( Note: The maximum bearing capacity of the handle is 3.5kg. Please do not overload. )

【ADAPTABILITY】Fit for the rigs with 15mm rods support system to connect them together with camera accessories | 【INNER THREAD】Comes with inner M12 threaded holes on each end to extend various 15mm-compatible accessories | 【COMPATIBILITY】Can be attached to a wide variety of available accessories, such as 15mm follow focus, 15mm matte box, 15mm rod monitor mount, etc. | 【HIGH QUALITY】Made of aluminum alloy, durable, solid and sturdy | 【PACKAGE INCLUDES】2 x 15mm lightweight aluminum alloy rods

SMALLRIG 15mm Carbon Fiber Rod (4" , pair) 1871 is a pair of 4 inch long non-threaded rods featuring a carbon fiber pattern on the outer surface, which is highly rigid, lightweight and corrosion resistant | This pair of rods are 100mm long machined from hollow carbon fiber tubes | It is precision crafted for 15mm support systems, you can attach a wide variety of available accessories, such as follow focus, matteboxes and much more | If you need much longer carbon fiber rods, please click 15mm Carbon Fiber Rod - 20cm 8inch (2pcs) 870, 15mm Carbon Fiber Rod - 30cm 12inch (2pcs) 851 | Made of carbon fiber, sturdy and durable. Please note that the carbon fiber rods do not feature female thread

15mm rod carbon fiber 1690 fits for those rigs with 15mm rail block clamp to connect them together with your camera | SmallRig 1690 can be attached to a wide variety of available accessories, such as follow focus, matte boxes, also 15 mm shoulder pad, etc. | Made of lightweight carbon fiber. Rigid, durable and lightweight rods | Highly rigid, lightweight and corrosion resistant | 2 rods are included in the package, 9 inch in length

【NEW VERSION】SmallRig lens support BSL2681 is the updated version of SmallRig lens support 1784. It is designed to take much of the weight of heavier lens off the camera's lens mount | 【REDUCE THE PRESSURE】When connected to a cinema lens's support foot or a still photo lens's tripod collar, this lens support removes the weight stress from the camera's lens mount. It relieves the potentially damaging pressure on the camera's lens mount | 【SECURITY DESIGN】The Y shape bracket has two rubber cushions on top to increase friction and protect the surface of lens. It also features a strap slot on each side for further security | 【QUICK ADJUSTMENT】The lens support offers 53.5mm vertical adjustment to fit most lens. You can adjustable the height of the Y shape bracket via the centered quick release knob | 【FOR 50-140MM LENS】It is mounted on standard LWS-spaced 15mm rods and compatible with the lens of 50 to 140mm diameter

【NEW VERSION】SmallRig lens support BSL2680 is the updated version of SmallRig lens support 1087. It is designed to take much of the weight of heavier lenses off the camera's lens mount | 【REDUCE THE PRESSURE】When connected to a cinema lens's support foot or a still photo lens's tripod collar, this lens support removes the weight stress from the camera's lens mount. It relieves the potentially damaging pressure on the camera's lens mount | 【SECURITY DESIGN】The Y shape bracket has two rubber cushions on top to increase friction and protect the surface of the lens. It also features a strap slot on each side for further security | 【QUICK ADJUSTMENT】The lens support offers 34.5mm vertical adjustment to fit most lenses. You can adjustable the height of the Y shape bracket via the centered quick-release knob | 【COMPATIBILITY】It is mounted on standard LWS-spaced 15mm rods and compatible with the lens of 50 to 140mm diameter

Compatibility - SMALLRIG 15mm LWS Rod Support 3652 is an universal accessory for SMALLRIG Matte Box 3196/ 3680/ 3556/ 3641/ 3645, designed to fix matte box and protect lens mount | 20.4mm Vertical Adjustment - 15mm LWS Rod Support 3652 is 20.4mm vertically adjustable, with a horizontal support at its bottom to prevent tilting | Anti-twist Design - 15mm Dual Rod Clamp 3652 has a 1/4"-20 screw and two pins to secure the matte box on the rail support system | Aluminum Alloy Construction - The rod clamp 3652 weighs only 85g, it is lightweight but stable and durable because it is made of aluminum alloy | Note - It is not compatible with Matte Box 2660/3575, but compatible with Φ15mm rail support system, and could be installed in any direction

Compatible with 15mm standard rods, fits perfectly with SmallRig Dogbone Arm 1684 | Rosette for Arri standard with M6 threaded holes, work with M6 screw (31.8mm diameter) | Enable to attach extension arm or EVF support, etc | Lock the rod clamp via the wingnut, quickly and conveniently | CNC machined. Lightweight, only weighs 0.12lb

【2 PAIR 15MM RODS】SmallRig M12 Thread 15mm Rods set 1659 includes 2pcs M12-20cm rods, 2pcs M12-30cm rods and 2pcs rod connectors. | 【WIDE COMPATIBILITY】Designed for a wide variety of DSLR and HD video camera accessories such as handlebars, shoulder mount, follow focus and matte boxes, etc. | 【HIGH-QUALITY MATERIAL】Made of durable anodized black aluminum, CNC machinery structure, durable and stable to use when shooting. It is the best choice for a shoulder support system. | 【GREAT COMBINATION】The M12-20cm rod could attach to an M12-30cm rod via a rod connector for the shooting. This combination extends more possibilities and versatilities. | 【SPECIFICATIONS】Material: Aluminum. Diameter: 15mm. Length: 20cm (8")/30cm (12"). Weight: 55g(8")/85g (12"). | 【RELATED PRODUCTS】 If you need a higher carrying capacity rod, we have Stainless Steel Rod 3684, 3682, and 3683 as a recommendation.

【Design for iPhone 13 Pro Max Cage】The lens backplane is designed for iPhone 13 Pro Max cage-3561. You can use this backplane to replace the M mount backplane of the original cage to meet the needs of adapting lenses of different specifications. | 【With External Lens Mount】Thanks to the design of the lens mount, the lens backplane can be connected to a 17mm threaded lens, which can further improve the picture quality of mobile phone shooting. The lens backplane size is: 91 x 51.5 x 5.8mm. | 【Broad Vision】The hole position of the lens backplane is designed accurately, which is completely suitable for iPhone ultra-wide-angle lens. It does not block the lens and provides you with a wider field of view. | 【Robust and Wear-Resistant】All aluminum alloy material is perfectly compatible for iPhone 13 Pro Max Cage. At the same time, it has the function of protecting the Phone lens, scratch-resistant and wear-resistant, which can greatly improve the service life of the mobile phone lens. | 【Package Content】The package include：1 x threaded lens backplane for iPhone 13 Pro max cage, 3 x screws, 1 x wrench. The installation is simple, only two steps are required to complete the installation of the lens backplane.

【Design for iPhone 14 Pro Max Cage 4077 4078 4099】The lens backplane is designed for iPhone 14 Pro Max cage- 4077 4099 4078. You can use this backplane to replace the M mount backplane of the original cage to meet the needs of adapting lenses of different specifications. | 【With External Lens Mount】Thanks to the design of the lens mount, the lens backplane can be connected to a 17mm threaded lens, which can further improve the picture quality of mobile phone shooting. The lens backplane size is: 89.8 x 57.9 x 5.3mm. | 【Broad Vision】The hole position of the lens backplane is designed accurately, which is completely suitable for the use of iPhone ultra-wide-angle lens. It does not block the lens and provides you with a wider field of view. | 【Robust and Wear-Resistant】All aluminum alloy material is perfectly compatible for iPhone 14 Pro Max Cage. At the same time, it has the function of protecting the iPhone lens, scratch-resistant and wear-resistant, which can greatly improve the service life of the mobile phone lens. | 【Package Content】The package include：1 x threaded lens backplane for iPhone 14 Pro Max cage, 6 x screws, 1 x wrench. The installation is simple, only two steps are required to complete the installation of the lens backplane.

【Photography Screws Kit】: The SmallRig MD3184 includes Two 1/4”-20 flat head screws, eight 1/4”-20 hex screws for cages, L brackets, QR plates, baseplates, handles, rod clamps, top plates and monitors, two M4 and two M5 hex screws, two M3 trim head screws for mounting rosettes, two M2.5 hex screws used for cage anti-twisting and two 3/8”-16 flat head screws for QR plates and baseplates and 4 hex spanners(3/16、3、4、2/Flat Screwdriver) | 【Magnetic Precision Screwdriver Set】: The 4 Psc hex keys are magnetically attracted to the storage plate which includes 3/16、3、4、2 Flat Screwdriver | 【Convenience and Portable】: There are clear laser-engraved specification marks for conveniently accurate access. The storage plate comes with a flannel and a strap hole for easy storage and carrying. | 【Premium Material】：The hex keys and screws are made of stainless steel, which is high temperature resistance and strong corrosion resistance; The storage plate is made of aluminum alloy, which is lightweight and durable | 【Wide Applicability】：Suitable for the installation and disassembly of photographic equipment accessories, which can cover the needs of most photographers

【Length】Length of 4 inches / 10cm | 【Diameter】The diameter of the rods is industrial 15mm standard | 【Inner Thread】M12 inner thread on each end of a rod, so that you can use M12 rod end cap (SmallRig 1617) to prevent your accessories sliding from rods | 【Compatibility】Mainly used on camera riser system and filmmaking accessories, such as matte box, follow focus, lens support, etc. | 【High Quality】Made of 601 aluminum alloy, well finished and precise CNC processing, sturdy and durable

ND 0.3 (1 Stop) ND Filter: Achieve balanced exposure for sunset/sunrise/sky photography and cinematic scenes with the SmallRig ND 0.3 (1 Stop) Filter. This versatile filter is perfect for professional photographers and videographers seeking high-quality results. | Why Choose Square ND Filters: Experience high-clarity pictures without sacrificing image quality with this Neutral Density Filter. The square design can be used for a Matte Box or 4 x 5.65" filter tray stacked with multiple filters for better control of light and color reproduction. NOTE: Incompatible with 100 x 150mm filter tray. | 50% Light Transmittance: The 4 x 5.65" filter features 50% light transmittance, with 1 stop of light blocking. ND 0.3 stands for the filter’s optical density. Optical density grows and light transmittance lowers as the number goes up. | Double-sided Multilayer Nano-coating: The filter is coated on both sides with multilayer nano-coating to reduce lens flare and optimize light transmission. These coatings are waterproof, oil-resistant, and anti-scratch, making the filter easy to clean and store, and ideal for use in video or film shooting. | High Quality B270 Optical Glass: Made with high quality B270 optical glass, this filter is precisely ground and polished for use with lenses of various focal lengths. The filter has high-precision color restoration with minimal loss of image detail at moderate color temperature, which is a versatile tool for photographers and videographers | For Matte Box and Filter Tray: Supports SmallRig mini matte box 3196, 3575; 3680, Multifunctional Modular matte box 3641, 3645, 3556. Package Included: 4 x 5.65" ND0.3（1 Stop）Filter x 1, Carrying Bag x 1, Clean Cloth x 1

ND 0.9 (3 Stop) ND Filter: Achieve balanced exposure for sunset/sunrise/sky photography and cinematic scenes with the SmallRig ND 0.9 (3 Stop) Filter. This versatile filter is perfect for professional photographers and videographers seeking high-quality results. | Why Choose Square ND Filters: Experience high-clarity pictures without sacrificing image quality with this Neutral Density Filter. The square design can be used for a Matte Box or 4 x 5.65" filter tray stacked with multiple filters for better control of light and color reproduction. NOTE: Incompatible with 100 x 150mm filter tray. | 12.5% Light Transmittance: The 4 x 5.65" filter features 12.5% light transmittance, with 3 stop of light blocking. ND 0.9 stands for the filter’s optical density. Optical density grows and light transmittance lowers as the number goes up. | Double-sided Multilayer Nano-coating: The filter is coated on both sides with multilayer nano-coating to reduce lens flare and optimize light transmission. These coatings are waterproof, oil-resistant, and anti-scratch, making the filter easy to clean and store, and ideal for use in video or film shooting. | High Quality B270 Optical Glass: Made with high quality B270 optical glass, this filter is precisely ground and polished for use with lenses of various focal lengths. The filter has high-precision color restoration with minimal loss of image detail at moderate color temperature, which is a versatile tool for photographers and videographers | For Matte Box and Filter Tray: Supports SmallRig mini matte box 3196, 3575; 3680, Multifunctional Modular matte box 3641, 3645, 3556. Package Included: 4 x 5.65" ND0.9（3 Stop）Filter x 1, Carrying Bag x 1, Clean Cloth x 1

【HD Cinematic ND Filter】SmallRig 4x5.65” ND1.2 Filter 3589, measuring 143.45 x 101.55mm, is designed for professional photographers/filmmaking. Our Neutral Density Filter is used to balance the exposure, suitable for sunset/sunrise/sky photography or cinematic scene. This 4mm thick filter is ideal for SmallRig Matte Box 2660, Mini Matte Box 3196, and Fitter Frame 3319 | 【SCHOTT B270 Optical Glass from Germany】High clarity, high transmission B270 optical glass is precisely ground and polished for use with lenses of various focal lengths without compromising image sharpness. | 【6.25% light transmittance】The 4 x 5.65" filter features 6.25% light transmittance, with four stops of light blocking. The filter has high-accuracy color reproduction at moderate color temperature with little loss of detail across the image, which is ideal for video or film shooting | 【Double Layer Nano-coating】The filter is coated on both sides with multi-layer Nano, protecting against scratches, water, oil, and fingerprints. Easy to clean. A plastic storage box is for you to store the carry the filter with you without damaging it | 【Specifications】 The weight is only 147g, with 4mm thickness and 143.45 x 101.55mm size, no color cast

ND 1.8 (6 Stop) ND Filter: Achieve balanced exposure for sunset/sunrise/sky photography and cinematic scenes with the SmallRig ND 1.8 (6 Stop) Filter. This versatile filter is perfect for professional photographers and videographers seeking high-quality results. | Why Choose Square ND Filters: Experience high-clarity pictures without sacrificing image quality with this Neutral Density Filter. The square design can be used for a Matte Box or 4 x 5.65" filter tray stacked with multiple filters for better control of light and color reproduction. NOTE: Incompatible with 100 x 150mm filter tray. | 1.56% Light Transmittance: The 4 x 5.65" filter features 1.56% light transmittance, with 6 stop of light blocking. ND 1.8 stands for the filter’s optical density. Optical density grows and light transmittance lowers as the number goes up. | Double-sided Multilayer Nano-coating: The filter is coated on both sides with multilayer nano-coating to reduce lens flare and optimize light transmission. These coatings are waterproof, oil-resistant, and anti-scratch, making the filter easy to clean and store, and ideal for use in video or film shooting. | High Quality B270 Optical Glass: Made with high quality B270 optical glass, this filter is precisely ground and polished for use with lenses of various focal lengths. The filter has high-precision color restoration with minimal loss of image detail at moderate color temperature, which is a versatile tool for photographers and videographers | For Matte Box and Filter Tray: Supports SmallRig mini matte box 3196, 3575; 3680, Multifunctional Modular matte box 3641, 3645, 3556. Package Included: 4 x 5.65" ND1.8（6 Stop）Filter x 1, Carrying Bag x 1, Clean Cloth x 1

SmallRig 4x5.65" 1.2 4-Stop Multi-Coating Neutral Density Filter - Storage Box - SmallRig 2 Year Limited Warranty | Supports 4x5.65 matte box system | Double-sided multi-layer nano-coating, with uniform linearity of extinction spectrum | Made of excellent SCHOTT B270 optical glass from Germany, without damaging image quality | Waterproof and oil-resistant coating

?MAGIC ARM?The precise and durable designed Articulating Magic Friction Arm provides great versatility for the positioning of access. | ?EASY POSITION?Double 360 degrees Ball Head Articulating design adjusts any angles based on your needs. | ?WIDE COMPATIBILITY?With 1/4" thread on both ends to install any on-camera flash lights, microphone,LCD monitor,DV Monitor, microphone on one end and other accesorries like cage, NATO Rail 1973, 15mm Rod 1182 and Quick Release Rod Clamp 1976 etc. | ?RUBBER THREAD?Mounted with 1/4" screw is a rubber cushion which could prevent the scratches of monitor and help to lock the monitor tighter. | ?CUSTOMER SERVICE?Backed with 100% satisfaction guaranteed for quality problem; 24hx7 Customer Service Support.

【Black Diffusion Filter Function】SmallRig 52mm Magnetic Black Pro Mist Diffusion Filter 4217 softens high light intensity and lowers the contrast and sharpness of your shot, creating a dreamy and romantic effect without losing shadow detail. Perfect for portrait photography, video recording and vlog videos. | 【Magnetic Design】The black diffusion filter via magnet attraction to install and remove the filter, reducing the wear out for lens threads. Enhanced magnetic attraction is safe and reliable, and photographers can quickly switch filters according to different needs for light. | 【Multi-coating AGC HD Glass】The black mist filter is made of premium imported AGC optical glass and true color film, which improves the light transmittance while ensuring the image quality without color cast. The 28 layers nano coating on both sides protects the filter against water, dirt, oil, and scratches. | 【Ultra Slim Aluminum Alloy Frame】The 3.5mm filter frame is made of CNC processed aluminum alloy to avoid vignetting and dark corners under the ultra wide angle lens. | 【Package Includes】SmallRig 52mm Magnetic Black Mist Filter + Professional Microfiber Lens Cleaning Cloth + Portable Storage Case. | 【Note】SmallRig magnetic 52mm black diffusion filter is only compatible with 52mm magnetic filter ring, recommend SmallRig filter adapter 3840B/3845B/4219.❗ Not compatible any threaded filter adapters.

【CPL Filter Function】Circular polarizing filters can eliminate reflection from non-metallic surfaces (such as lakes, windows, waterfalls, glass, buildings, etc.) and thereby improve image saturation. Also can enhance the contrast and saturation of the picture, making the sky bluer and the water more clearer. | 【Magnetic Design】Your CPL filter can be magnetically and securely attached to SmallRig magnetic filter adapter ring, allowing for quick removal and replacement of filters. Recommend SmallRig magnetic filter ring 3840B/3845B/4219. | 【Multi Coated HD Optical Glass】Made of premium imported AGC optical glass and true color film, it helps to provide realistic colors for landscape photography. With 28 layers nano coating on both sides protects the filter against water, dirt, oil and scratches. | 【Ultra Slim Aluminum Alloy Frame】The 3.5mm filter frame is made of CNC processed aluminum alloy to avoid vignetting under the ultra wide angle lens. Anti-slip design on the frame allows easy rotation of the filter to change polarization. | 【Package Includes】SmallRig 52mm Magnetic CPL Filter + Professional Microfiber Lens Cleaning Cloth + Portable Storage Case.

【Magnetic Variable ND2-ND32 Lens Filter】SmallRig magnetic 52mm VND filter features 5 stops of exposure brightness, from ND2, ND4, ND8, ND16 to ND32. Balance exposure times by rotating the outer polarizer to reduce the amount of light when shooting rivers, waterfalls, traffics, etc. | 【Magnetic Design】The 52mm VND filter via magnet attraction to install and remove the filter, reducing the wear out for lens threads. Enhanced magnetic attraction is safe and reliable, and photographers can quickly switch filters according to different needs for light. | 【No ”X ”Cross in the Picture】Rotating hard stop design at ND2 & ND32 for more precise control of shooting. Don't worry about X cross dark spot when shooting with wide-angle lenses. | 【Imported HD Optical Glass】This VND filter is made of premium imported AGC optical glass and true color film, which increases the light transmittance while achieving ultra-low color shift and producing accurate colors. Multi-layer double sided Nano coating makes the filter Waterproof, stain-resistant, oil-proof and scratch-resistant. | 【Aluminum Alloy Frame】The filter frame is made of CNC processed aluminum alloy, with a large diameter design to avoid vignetting under the ultra wide angle lens. The markers showing the density on the filter frame help to adjust the density easily. | 【Note】SmallRig magnetic 52mm VND filter is only compatible with SmallRig magnetic filter ring, recommend ID 3840B/3845B/4219.❗ Not compatible with other magnetic filter rings and any threaded filter adapters.

Compatibility: This video tripod for camera is universally compatible with all 1/4"-20 and 3/8" threaded holes video head, after equipped with ball head and quick plate, you can easily use the tripod to support your device such as DSLR, action cameras, mirrorless cameras, cell phones and projectors.【Note】video head and quick release plate are not included, for camera with telephoto zoom lens, you need to buy a tripod mount ring additionally or telephoto lens bracket for better balance. | 2-in-1 Tripod & Monopod: The aluminum tripod can be easily turned into a monopod or walking stick, it is a good companion for you to go hiking or traveling. And the central pole can be inverted to allow for low angle shooting and macro photography. | Height Adjustble and Innovation Design：The height of SmallRig T-10 tripod is adjustable, 4-section column legs with 3 quick release flip-locks allows you to adjust the working height from 19.7" to 67.7" in seconds. Different from other ordinary tripods, this tripod has three 1/4" threaded holes added to the bracket, which can meet the needs of external magic arms, mobile phones, monitors, etc. | 33lbs Max Load and Easy to Carry: The dslr tripod offers high level of stability using great quality level of magnesium aluminum alloy. It can withstand up to 33 lbs (15 kg). The net weight of the tripod is 2.42 lbs, the storage length is only 41cm/16.1in and the lightweight tripod comes with a carry bag, you can easily take the tripod to anywhere you want to go. | Package Include: Tripod*1, Carry Bag*1, Alen Wrench*3, Maunual*1, Stainless Steel Foot Screw*3.

Wide Compatibility: This camera tripod is universally compatible with cameras and devices with 1/4"-20 and 3/8"-16 threaded holes, such as DSLR cameras, action cameras and mirrorless cameras, etc. It can also be used with cell phones and projectors. 【Note】For cameras with telephoto zoom lens, you need to purchase additional tripod mount ring or telephoto lens mount for better balance. | 2 in 1 Tripod &Monopod: You can easily turn the aluminum tripod into a monopod according to your needs, this tripod is a good companion for your hiking or traveling. | Angle Adjustable:The specially designed 36mm metal ball-head can rotate 360 degree allowing you to take photos at any angle with horizontally and vertically. And the central pole can be inverted to allow for low angle shooting and macro photography. | Height Adjustable: 4-section column legs with 3 quick release flip-locks allows you to adjust the working height from 16" to 71" in seconds. 16.6" folden size is easily took to anywhere for outdoor photography. | Load Bearing and Innovative Design: The dslr tripod offers high level of stability using great quality level of magnesium aluminum alloy. It can withstand up to 33 lbs (15 kg). Different from other tripods, this tripod has Three 1/4" threaded holes added to the bracket, which can meet the needs of external magic arms, mobile phones, monitors, etc. | Package Includes:Tripod*1, Smartphone Holder*1, Carrying Bag*1, Quick release plate*2, Alen Wrench*3, Maunual*1, Stainless Steel Foot Screw*3.

【2-in-1 Tripod Monopod】SmallRig Video Tripod can be easily turned into a monopod or tripod. Monopod with a working height up to 193cm/76in, tripod with a working height up to 185cm/72in, the storage length is only 42cm/16in. SmallRig 3760 Video Tripod is easy to carry,delicately designed for videoing, live streaming, vlogging, etc. | 【With Mini Fluid Head】The compact and portable mini fluid head features fixed damping to ensure smooth operation. It can tilt +90°/-55° and rotate 360° and comes with a removable non-slip lever and a quick release plate for Arca-type for quick switch between handheld and tripod shooting. A built-in spanner ensures an easier camera setup(Fluid Head -3259). | 【Innovation Design】Different from other tripods, this tripod has Three 1/4" threaded holes added to the bracket, which can meet the needs of external magic arms, mobile phones, monitors, etc. And SmallRig have improved the knobs of the tripod legs. Different from tripod of other brands , SmallRig uses the metal knob lock to fix tripod legs to avoid breakage of plastic knobs. | 【Adjustable Tripod】4-section column legs with knob lock allows you to adjust the working height from 16.5" to 72" in seconds. 16.5" folden size is easily took to anywhere for outdoor photography, saving you more time and can more focused on enjoying the shooting，can support devices up to 33lb/15kg(Tripod)，6.6lb/3kg(Fluid head). | 【Pakcage Includes】In addition, a smartphone holder is included, suitable for live streaming and vlogging. Package Includes: 1 x CT180 Tripod,1 x Fluid Head(ID:3259), 1 x Smartphone Holder, 3 x Stainless Steel Foot Screw, 3 x Allen Wrench, 1 x User Manual, 1 x Carrying Bag.

Compatible with Alpha 7R V/Alpha 7 IV/Alpha 7 S III: Cage Kit 3668 includes a cage, a clamp for HDMI cable , and a top handle. It is designed to facilitate low-angle shots and protect the camera while offering a wide range of accessory mounts. It is designed for Sony Alpha 7R V, Alpha 7 IV and for Sony Alpha 7 S III | Two-point Locking: Mount camera onto the A7 IV cage with an integrated 1/4"-20 screw, and use the two side locking plates(one for Sony Alpha7S III/Alpha 1, one for Alpha 7 IV ) to prevent twisting. To use the side locking plate, please remove the split ring on the left side of the camera first. Please note that camera strap eyelet is occupied when using the side locking plate | All-round Protection: Adopted aviation aluminum and formfitting design for security and durability. The Alpha 7 IV cage features built-in protective pads prevent the camera from being scratched. It maintains access to the camera's controls and hot shoe and features when camera mounted | Multiple Mounting Points: The cage features one integrated shoe mount, multiple 1/4"-20 threads and 3/8"-16 locating hole for ARRI. The cage also has a built-in NATO rail on the side, and it also features strap slots for a separately available neck or hand strap. A magnetic flat-head screwdriver & Allen wrench is stored on bottom of the cage to secure the mounting screw | Ergonomic Top handle: The top handle feels comfortable and enables easy carrying and at a low-angle shot. It features 1/4"-20 threaded holes, 3/8"-16 locating for ARRI holes, built-in cold shoes for mounting other accessories like SmallRig monitor mount 2294 | For HDMI Cable Clamp: The clamp for HDMI cable, mounted onto the left side of the cage via one 1/4"-20 screw and two locating pins, prevents deflection and fixes cables with a thumbscrew to protect interfaces and ensure stability signal transmission. Please note that this cable clamp is not compatible with Sony Alpha 1.The Clamp for HDMI Cable interferes with the synchroterminal interface when used on the Alpha 7R V camera | Power Backup Solution: SmallRig NP-FZ100 camera battery charger set is available now, two 2040mAh(Real) rechargeable batteries and a charger brings long battery life for your videos and photos shooting, if you need a sufficient power supply, please search SmallRig NP-FZ100 Battery 3824

【Compatibility】 SmallRig Advanced Kit 3710 is designed for Sony Alpha 7R V / Alpha 7 IV / Alpha 7S III. It includes a cage, a top handle, a side handle and a clamp for HDMI cable. The advanced kit can reduce burdens on arms when handheld shooting and increase stability. | 【Multiple Accessory Mounting Points】The cage, top handle and side handle equipped with several 1/4"-20 threaded holes for Ball Heads Magic Arm 3873, cold shoes for microphone, LED video light, and several 3/8"-16 locating holes for ARRI for Mini Side Handle 2914. Also, the NATO rail can add versatility to the cage. | 【New Streamlined Design】It is stable and anti-deflection because the cage locks the camera firmly via a locating pin, a 1/4"-20 screw at the bottom and a M2.5 screw at the left of the cage. The formfitting cage with a new streamlined design gives full access to buttons and ports. And the dedicated clamp for HDMI cable protects the interfaces to ensure stable signal transmission. | 【Lightweight and Portable】The cage kit is lightweight and portable because it is made of lighter carbon fiber, so more suitable for long time handheld shooting. The top handle grip is comfortable and convenient for camera moving and low angle shooting. The side handle, made of light carbon fiber and PU leather, makes for a pleasant and firm grip. | 【Quick Release Plate for Arca-Swiss 】The bottom of the cage features quick release plate for Arca-Swiss, so it enables quick switch between handheld, tripod and gimbal ( for DJI RS 2 / RSC 2 / RS 3 / RS 3 Pro) shooting.

[Only For Sony A7 IV] SmallRig Tempered Glass Screen Protector 3250 is only compatible with Sony a7 IV Mirrorless Camera, which is designed to protect the LCD screen from fingerprints, water spray, dust, and scratches. | [Maintains Touchscreen Control] The ultrathin, 0.4mm thick design allows for natural, accurate touchscreen control. | [2.5D Arc-Rounded Edges] The screen protector has rounded edges that blend in well with the screen and allow for a more native look and feel. You can easily paste the protector on the screen via electrostatic adsorption once you align it to the edges of the screen without leaving bubbles. | [Strong Protection] This screen protector for A7 IV offers shock protection with an IK03 standard. (Please note: To prevent dust and bubbles, the screen protector is slightly smaller than the LCD screen in size.) | [What You Can Get] 2 x Screen Protector, 2 x Alcohol Wipe (Wet & Dry), 2 x Fiber Cloth, 2 x Dust Absorber | [Power Backup Solution] SmallRig NP-FZ100 camera battery charger set is available now, two 2040mAh(Real) rechargeable batteries and a charger brings long battery life for your videos and photos shooting, if you need a sufficient power supply, please search SmallRig NP-FZ100 Battery 3824

[Only For Sony A7 IV] SmallRig Tempered Glass Screen Protector 3250 is only compatible with Sony a7 IV Mirrorless Camera, which is designed to protect the LCD screen from fingerprints, water spray, dust, and scratches. | [Maintains Touchscreen Control] The ultrathin, 0.4mm thick design allows for natural, accurate touchscreen control. | [2.5D Arc-Rounded Edges] The screen protector has rounded edges that blend in well with the screen and allow for a more native look and feel. You can easily paste the protector on the screen via electrostatic adsorption once you align it to the edges of the screen without leaving bubbles. | [Strong Protection] This screen protector for A7 IV offers shock protection with an IK03 standard. (Please note: To prevent dust and bubbles, the screen protector is slightly smaller than the LCD screen in size.) | [What You Can Get] 2 x Screen Protector, 2 x Alcohol Wipe (Wet & Dry), 2 x Fiber Cloth, 2 x Dust Absorber | [Power Backup Solution] SmallRig NP-FZ100 camera battery charger set is available now, two 2040mAh(Real) rechargeable batteries and a charger brings long battery life for your videos and photos shooting, if you need a sufficient power supply, please search SmallRig NP-FZ100 Battery 3824

New Version: The new version of Cage 3081B provides accessory mounting and protection for your a7C mirrorless camera. It solves the problem that the cage can be installed without removing the shoulder strap loop and RS2 stabilizer compatibility issues. Besides, the rod clamp mounting hole and the shoulder strap hole are added on the left side. | Side Locking System: The cage secures to the camera with a 1/4"-20 screw at the bottom. To further prevent twisting, can also use the right side lock by pushing up the slider and secure the attached small screw to the strap hole of the camera. | Built-in Plate for Arca-type: On the bottom built-in quick release plate for Arca-type fits RS 2 / RSC 2 / RS 3 / RS 3 Pro gimbals for DJI for quick switch between handheld shooting and stabilizer shooting. | Multiple Installation Points: Built-in 1/4''-20 threaded holes, 3/8" -16 locating holes for ARRI and cold shoe mount to to mount Top Handle 2165, Cold Shoe Extension 2879 and Tripod BUT2664 for vlog shooting; the top built-in cold shoe suits microphones, LED lights | Note: To use the side lock, please remove the split ring on the right side of the camera first. | Power Backup Solution: SmallRig NP-FZ100 camera battery charger set is available now, two 2040mAh(Real) rechargeable batteries and a charger brings long battery life for your videos and photos shooting, if you need a sufficient power supply, please search SmallRig NP-FZ100 Battery 3824

[For Alpha 7R V/Alpha 7 IV/Alpha 7 S III]: SmallRig Cage Kit 3669 includes a cage, a clamp for HDMI cable , a top handle and a side handgrip. It is designed to reduce armload and increase stability during handheld shooting while offering a wide range of accessory mounts. It is designed for Sony Alpha 7R V, Alpha 7 IV and for Sony Alpha 7 S III | [Two-point Locking]: Mount the camera onto the cage with an integrated 1/4"-20 screw, and use the two side locking plates(one for Sony Alpha7S III, one for Alpha 7 IV ) to prevent twisting. To use the side locking plate, please remove the split ring on the left side of the camera first. Please note that the camera strap eyelet is occupied when using the side locking plate | [All-round Protection]: Adopted aviation aluminium and formfitting design for security and durability. The Alpha 7 IV cage features built-in protective pads that prevent the camera from being scratched. It maintains access to the camera's controls and hot shoe and features when the camera mounted | [Multiple Mounting Points]: The cage features one integrated shoe mount, multiple 1/4"-20 threads and a 3/8"-16 locating hole for ARRI. The cage also has a built-in NATO rail on the side, and it also features strap slots for a separately available neck or hand strap. A magnetic flat-head screwdriver & Allen wrench is stored on the bottom of the cage to secure the mounting screw | [Top handle & Side handgrip]: Come with a top handle for low-angle shot and a side handle for increased stability. The top handle feels comfortable and enables easy carrying at a low-angle shot. The side grip features a silicone insert for better grip and more stable shooting.Handle features 1/4"-20 threaded holes, 3/8"-16 locating holes for ARRI, built-in cold shoes for mounting microphones, LED lights, monitors, etc. | [Clamp for HDMI Cable ]: The clamp for HDMI cable , mounted onto the left side of the cage via one 1/4"-20 screw and two locating pins, prevents deflection and fixes cables with a thumbscrew to protect interfaces and ensure stable signal transmission. NOTE:This cable clamp is not compatible with Sony Alpha 1. Clamp for HDMI Cable interferes with the synchroterminal interface when used on the Alpha 7R V camera | [Power Backup Solution]: SmallRig NP-FZ100 camera battery charger set is available now, two 2040mAh(Real) rechargeable batteries and a charger brings long battery life for your videos and photos shooting, if you need a sufficient power supply, please search SmallRig NP-FZ100 Battery 3824

[For Alpha 7R V/Alpha 7 IV/Alpha 7 S III]: SmallRig Cage Kit 3669 includes a cage, an HDMI cable clamp, a top handle and a side handgrip. It is designed to reduce armload and increase stability during handheld shooting while offering a wide range of accessory mounts. It is designed for Sony Alpha 7R V, Alpha 7 IV and for Sony Alpha 7 S III | [Two-point Locking]: Mount the camera onto the cage with an integrated 1/4"-20 screw, and use the two side locking plates(one for Sony Alpha7S III, one for Alpha 7 IV ) to prevent twisting. To use the side locking plate, please remove the split ring on the left side of the camera first. Please note that the camera strap eyelet is occupied when using the side locking plate | [All-round Protection]: Adopted aviation aluminium and formfitting design for security and durability. The Alpha 7 IV cage features built-in protective pads that prevent the camera from being scratched. It maintains access to the camera's controls and hot shoe and features when the camera mounted | [Multiple Mounting Points]: The cage features one integrated shoe mount, multiple 1/4"-20 threads and a 3/8"-16 locating hole for ARRI. The cage also has a built-in NATO rail on the side, and it also features strap slots for a separately available neck or hand strap. A magnetic flat-head screwdriver & Allen wrench is stored on the bottom of the cage to secure the mounting screw | [Top handle & Side handgrip]: Come with a top handle for low-angle shot and a side handle for increased stability. The top handle feels comfortable and enables easy carrying at a low-angle shot. The side grip features a silicone insert for better grip and more stable shooting.Handle features 1/4"-20 threaded holes, 3/8"-16 locating holes for ARRI, built-in cold shoes for mounting microphones, LED lights, monitors, etc. | [HDMI Cable Clamp]: The HDMI cable clamp, mounted onto the left side of the cage via one 1/4"-20 screw and two locating pins, prevents deflection and fixes cables with a thumbscrew to protect interfaces and ensure stable signal transmission. NOTE:This cable clamp is not compatible with Sony Alpha 1. HDMI Cable Clamp interferes with the synchroterminal interface when used on the Alpha 7R V camera | [Power Backup Solution]: SmallRig NP-FZ100 camera battery charger set is available now, two 2040mAh(Real) rechargeable batteries and a charger brings long battery life for your videos and photos shooting, if you need a sufficient power supply, please search SmallRig NP-FZ100 Battery 3824

【FULL ACCESSIBILITY】ONLY FITS FOR SONY A7RIII / A7III /A7M3 Camera. The cage would not block any buttons on the camera and you are able to access not only the battery but even the SD card slot. The hot shoe is accessible for Sony XLR-K2M/K1M | 【PERFECT PROTECTION】The updated alpha A7RIII/A7III cage adds a second locking point on the right side to prevent from twisting. Two pieces of rubber cushion on the bottom that prevent the camera from scratching | 【MOUNTING POINTS】Add plenty of 1/4"-20 and 3/8"-16 threaded holes for attaching more accessories. Also features locating holes for ARRI standard and a cold shoe on the top to attach corresponding accessories | 【RECOMMENDATIONS】It could attach Monitor Mount BSE2346/2070 for the monitor. For ARRI locating points on the top are compatible with corresponding locating pins. 1/4''-20 threaded holes on the top could be mounted with Top Handle 1984/1638 for handheld shooting, or they could be mounted with EVF Support 1842 for better shooting. It could be mounted with HDMI Lock 3676/1679 to protect HDMI cable and cable port. | 【WHAT YOU GET】1 x Cage for Sony A7RIII 2087; Friendly 24-hour Customer Support, 30-day No-hassle Return Service, Worry-free 2-year Warranty. | 【Power Backup Solution】SmallRig NP-FZ100 camera battery charger set is available now, two 2040mAh(Real) rechargeable batteries and a charger brings long battery life for your videos and photos shooting, if you need a sufficient power supply, please search SmallRig NP-FZ100 Battery 3824

The cage kit 2103 is designed ONLY for Sony A7RIII/ A7III. It includes cage, top handle and cold shoe mount. The cage could lock the camera securely and does not not block any access to battery compartment, ports and slots of camera. | The cage provides mounting points (standard 1/4" & 3/8" threads and cold shoe) so that you can mount accessoriess like micro-HDMI cable clamp 1649. The 1/4" and 3/8" threads on the bottom could be used to lock many kinds of tripod baseplate securely. | Two Located Points on the top of the cage are compatible with Locating pins, like Magic Arm 2026 for monitor or wireless image transmitter. | The NATO Handle 1955 features ease of assembly and disassembly, adjustable forwards and backwards for the balance of the rigs. A hex spanner is included for great convenience. | Double End Ball Head 1135 comes with a shoe adapter on the one end and a 1/4" screw on the other end. It enables to mount monitor, wireless video transmitter and microphone etc. It provides multiple choices for the cameraman based on the needs.

【FOR DJI RS 2 / RSC 2 / RS 3 / RS 3 Pro/ RS 3 mini】SmallRig Sling Grip 3028 is specially designed for DJI RS 2 / RSC 2 / RS 3 / RS 3 Pro/ RS 3 mini gimbal. This handle is designed to reduce arm fatigue during low angle shooting and make handling your DJI RS 2 / RSC 2 / RS 3 / RS 3 Pro handheld gimbal easier with this Sling Grip. | 【180 DEGREE ADJUSTMENT】Offering 180° adjustment via a built-in rosette joint, this ergonomic handgrip gives you the flexibility you need to shoot from a variety of angles, and it helps take the load off your arm. The rosette joint can be disassembled so the handgrip can be used on its own as a rosette handgrip. | 【QUICK RELEASE CLAMP】The grip mounts onto the gimbal using a NATO clamp and can support up to 17.6lb/8kg. Also, it features an anti-removal stud to ensure a safe and quick operation. An integrated strap slot allows you to use a separately available neck or shoulder strap for additional support. | 【ANTI-SLIP DESIGN】The silicon grip is an anti-slip design and gives you more comfort when holding it. Its sleek design and compact structure match perfectly with the stabilizer. Besides, an integrated strap slot allows you to use a separately available neck or shoulder strap for additional support. It can work with SmallRig Shoulder Strap KPAC2466 to reduce the arms burden. | 【MULTIPLE MOUNTING POINTS】Multiple 1/4"-20 and 3/8"-16 threads for ARRI are built-in on the handgrip which allows for mounting Magic Arm. With two cold shoe mounts on top and side of the handgrip, it can be mounted with wireless go, sound receiver, and Monitor Mount 2905.

Extensive Compatibility : Dual ball heads with magic arm features for ARRI 3/8"-16 Locating Screw and 1/4"-20 Screws (With Retractable Pins) on the end for DSLR cameras, action cameras, LED lights, flashes, and so on. | Anti-twist Retractable Pins : Magic arm with the retractable Pins on each end to prevent twisting. The locating pins are retractable spring designs. You can mount it on the accessories with 1/4" locating holes and 3/8"-16 locating holes for ARRI or with 1/4" threaded holes and 3/8"-16 locating holes for ARRI. | 360° Flexible Adjustment : The camera magic arm with an adjustable thumb lever could be adjusted in different positions and angles via both the ballhead and ballhead clamp. It comes with a small magnetic wrench at the bottom to tighten the thumbwheels on each end. | 12Ib Payload : The load capacity of the magic arm is 12Ib (5.5kg). Firmly fix your field monitor, LED lights, audio recorders, etc. Each ballhead is 0.79 inch (20mm) in diameter. This item weighs only 0.2 Ib (90g) , making it easy to carry around and store. | Durable and Stable : The magic arm holder is made of CNC-processed aluminum alloy and stainless steel, which is durable. The ball head with rubber rings is more stable. The rubber pads on each end protect your device from scratching. | Notice: Please note that the diameter of the ball head is 20mm and will NOT fit other brands clamps.

Extensive Compatibility : Dual ball heads with magic arm features for NATO Clamp and 1/4"-20 Screws (With Retractable Pins) on the end for DSLR cameras, action cameras, LED lights, flashes, etc. | Anti-twist Retractable Pins : Magic arm with the retractable Pins on each end to prevent twisting. The locating pins are retractable spring designs. You can mount it on the accessories with 1/4" locating holes and NATO Rail or with a 1/4" threaded hole and NATO Rail. | 360° Flexible Adjustment : The camera magic arm with an adjustable thumb lever could be adjusted in different positions and angles via both the ballhead and ballhead clamp. It comes with a small magnetic wrench at the bottom to tighten the thumbwheels. | 12Ib Payload : The max load capacity of the magic arm is 12Ib (5.5kg). Firmly fix your field monitor, LED lights, audio recorders, etc. Each ballhead is 0.79 inch (20 mm) in diameter. This item weighs only 0.2 Ib (91g) , making it easy to carry around and store. | Durable and Stable : The magic arm holder is made of CNC-processed aluminum alloy and stainless steel, which is durable. The ball head with rubber rings is more stable. The rubber pads on each end protect your device from scratching. | Notice: Please note that the diameter of the ball head is 20mm and will NOT fit other brands clamps.

▶ NATO Clamp Ballhead: Attach cage with NATO rail with on the other end via ballhead with NATO clamp, while it could attach monitor cage on the other end via ballhead with 1/4’’ screw | ▶ Quick Release & Adjust Angle: It features quick release and attachment and could be slid to get the balance of the whole kit.The monitor mounted on it could be adjusted in different positions and angles via both the ballhead and ballhead clamp | ▶ Precision locking device: A single wingnut is applied to lock the double ballhead tight directly, and thumb screws on both ends are utilized to lock the devices manually and a spared hex spanner is ready to lock it tighter | ▶ Extensive compatibility: The ballhead with 1/4" screw thread can not only be connected to monitors, camera cages (such as gh5 cage rigs SMALLRIG 2049, SMALLRIG 2050, SMALLRIG 2051, SMALLRIG 2052), but also can be attached to monitor cages with NATO rail, such as Cage(5") SMALLRIG 1726, SMALLRIG 2008,SMALLRIG Cage for Ninja Assassin 1788, SMALLRIG Monitor Cage 1834 or other products with nato rail | ▶ What You Get: 1 x Ballhead with 1/4’’ Screw; 1 x Ballhead with NATO Clamp; 1 x Ballhead Clamp; 1 x Hex Spanner

👍 Designed for Atomos Shinobi：Fit the body and protect the monitor from bumps and scratches;Do not block the buttons and interfaces of the fuselage;Do not interfere with the installation of the rear battery;Do not interfere with the installation of the original hood for Atomos | 👍 Multiple threaded Holes: SMALLRIG shinobi cage has multiple 1/4" and 3/8" threaded holes in the top, side and bottom for external threaded fittings such as threaded hole magic hand 2071 | 👍 Built-in Locating Hole for ARRI: Both top and bottom has a positioning hole for ARRI , can be connected to magic arm 2115 | 👍 Built-in NATO Rail: Both top and bottom has a NATO Rail, can be connected to the chute magic hand such as 2071, 2072, chute EVF bracket such as 2205 | 👍 What You Get: 1 x cage; 1 x HDMI Clamp 1693; 4 x 1/4 Screw; 1 x Hex Spanner