Full/Half Cage 2-in-1: This full cage designed specifically for Blackmagic Design Cinema 6K can be disassembled into a half cage, making it easier to balance when used with a stabilizer. | Included Lens Mount Converter Support: The included support is compatible with lens mount converter for Sigma MC-31 / MC-21, etc. and prevent damage to the camera body mount. | Three-Point Locking: With two 1/4"-20 screws at the bottom and one 1/4"-20 screw at the top, the cage locks the camera at three points to make it stable and not deflect. The bottom has a built-in hex wrench for easy disassembly and assembly. | Anti-Scratch & Non-Interference Interface: The cage has built-in silicone gaskets in many places to prevent scratches on the camera. The cage does not interfere with the normal use of the buttons, card slots, screen, battery compartment and other interfaces on the body. | Multiple Mounting Points: Built-in 1/4"-20, 3/8"-16 threaded hole, and positioning hole for ARRI, which can attach Side Handle 4015 and Top Handle 2165C; the NATO rail can attach Side Handle 4017; the cold shoe can attach Microphone 3468, Video Light 3286B, and SSD Support 3272; the wrist strap, shoulder strap and QD interface can attach Wrist Strap 3848 and Shoulder Strap 2428. Two horizontal 1/4"-20 holes at the hand grip can prevent the camera from deflecting in vertical shooting scenes.