Consumer Alert: Most users do not need a license to operate this wireless microphone system. Nevertheless, operating this microphone system without a license is subject to certain restrictions: the system may not cause harmful interference; it must operate at a low power level (not in excess of 50 milliwatts); and it has no protection from interference received from any other device.

The complete set for on stage performers | The Stage performance kit combines the world's most legendary microphone with an XLR cable and robust mic stand to give you all you need for performing live | Perfect for Vocalists

Frequency response tailored for vocals, with brightened midrange and bass roll off. Uniform cardioid pickup pattern isolates the main sound source and minimizes background noise. | Pneumatic shock-mount system cuts down handling noise. Effective, built-in spherical wind and pop filter. | Supplied with break-resistant stand adapter which rotates 180 degrees. Legendary Shure quality, ruggedness and reliability. | Connectivity: Wired | Integrated spherical filter minimizes wind and breath pop noise | Cardioid pickup pattern isolates the main sound source, while minimizing unwanted background noise | Ruggedly constructed with steel mesh grille | Pneumatic shock system | Frequency response - 50Hz to 15kHz

Frequency response tailored for vocals, with brightened midrange and bass rolloff to control proximity effect | Effective built-in spherical wind and pop filter. Frequency response: 50 to 15,000 Hz | Pneumatic shock-mount system cuts down handling noise. | Uniform cardioid pickup pattern isolates the main sound source and minimizes background noise

Frequency response tailored for vocals, with brightened midrange and bass rolloff to control proximity effect | Uniform cardioid pickup pattern isolates the main sound source and minimizes background noise | Pneumatic shock-mount system cuts down handling noise | Effective built-in spherical wind and pop filter | On/off switch for onstage control | Connectivity: Wired

Flat, wide-range frequency response for exceptionally clean and natural reproduction of both music and speech | Bass rolloff and mid-range emphasis (presence boost) controls with graphic display of response setting | Improved rejection of electromagnetic hum, optimized for shielding against broadband interference emitted by computer monitors | Internal "air suspension" shock isolation virtually eliminates mechanical noise transmission | Highly effective pop filter eliminates need for any add-on protection against explosive breath sounds, even for close-up vocals or narration | Now shipping with the A7WS detachable windscreen, designed to reduce plosive sounds and gives a warmer tone for close-talk vocals | Yoke mounting with captive stand nut for easy mounting and dismounting provides precise control of microphone position | Classic cardioid polar pattern, uniform with frequency and symmetrical about axis, to provide maximum rejection and minimum coloration of off-axis sound | Rugged construction and excellent cartridge protection for outstanding reliability | Replacement cartridge: RPM106

Instrument cable connects the T1, UT1, SC1, BLX1, PG1, PGX1, GLXD1, QLXD1, SLX1, LX1, ULX1, UC1, UR1, UR1M and U1 body-pack transmitter to a guitar or other instrument. | Features a 2.5 foot (0.75 m), length with 1/4-inch plug and 4-pin mini connector (TA4F) (supplied with instrument systems). | Cable, Instrument, 2.5 foot (.75 m), 4 Pin Mini Connector (TA4F) to 1/4-inch Connector.

Shure WA303 instrument cable. | Standard guitar cable, 2-feet (0.6 m) in length | 1/4-inch connector on each end.

For use with T1, SC1, PG1, PGX1, SLX1, LX1, U1, UC1, ULX, UR1, UR1M, UR1H and UT1 bodypack transmitters. | Instrument cable connects a right-angled 1/4" jack to a 4-pin mini-connector for bodypack transmitters. | Cable, Instrument, 2-foot (0.7m), 4-pin Mini Connector (TA4F) with Right-Angle 1/4-inch Connector, used with Shure Wireless Bodypack Transmitters.

For use with GLX-D Digital, ULX-D, and QLX-D Digital Wireless Systems. | Premium cable, connects a bodypack to a guitar or bass. | Premium 1/4"-to-TA4F guitar cable with locking thread connects the bodypack transmitter to a guitar or bass.

For use with BLX, PGX Digital, SLX, ULX, and UHF-R Wireless Systems. | Shure WA306 instrument cable. | Premium 1/4"-to-TA4F guitar cable connects the bodypack transmitter to a guitar or bass.

Shure WA309 Right-Angle LEMO Instrument Cable | Premium right-angle LEMO instrument cable connects a ADX1M micro body pack to a guitar, bass, or other electric instrument. | For premier talent, the Axient Digital Micro Body pack marries advanced design and an enhanced feature set for high-profile live performance. | The WA309 Instrument Cable is a premium 3-foot (0. 9 m) Right-Angle 1/4"-to-LEMO3 guitar cable with 3-pin mini LEMO locking connectors to connect the Axient Digital ADX1M micro body pack transmitter to a guitar, bass or other electric instrument. | Industry-leading REAN/Neutral and LEMO connectors | Active circuitry that minimizes AF and RF noise by optimizing input and output impedance | Cloth-jacketed, high-performance cable that withstands the wear and tear of touring performances

BLX PG58 Handle Only (Pink) | Shure Model: WA712-PNK | UPC Code: 042406395571 | Please note that the wireless microphone transmitter is not included | Legendary Shure quality design and construction for exceptional performance in rigorous environments

(Wired) Includes 3-pin male XLR connector w/ detachable belt clip | Lightweight wireframe and elastic headband adjust for a secure, comfortable fit | Extra-strong, small-diameter attached microphone cable resists breakage | Collapsible microphone boom for easy storage and transportation | Smooth, natural frequency response comparable to high-quality dynamic hand-held vocal microphones

Holds two microphones | Selectable positioning | For stereo broadcasting, recording or sound reinforcement. | Country of Origin: CHINA

Locking Microphone Windscreen | Reduces unwanted breath and wind noise. | For use with Shure SM57 and 545 Series microphones. | Country of Origin: China

Low- to high-impedance microphone-matching transformer | It has balanced female XLR and unbalanced high impedance male 1/4" phone plug connectors | Used to connect a balanced low-impedance microphone output to an unbalanced high impedance input on a mixer or recorder. | Country of Origin: China

Shure BETA 57A Dynamic Instrument Mic BETA57A 57 BETA57.

WIRELESS FREQUENCY BAND SELECTION: Before purchasing, please ensure that the wireless frequency band you select works in your area (refer to Shure website for details > search Shure Wireless Frequency Finder). | COMPONENT ONLY: For this BLX1 wireless bodypack transmitter to work, please make sure it matches the frequency band (style) on your Shure BLX series receiver (BLX4, BLX4R or BLX88). You'll also need an instrument cable (e.g. Shure WA302) or wireless microphone (e.g. SM31FH) that terminates to a TQG TA4F 4-pin mini-connector to connect to the BLX1 bodypack transmitter. | WHAT'S IN THE BOX? BLX1 wireless bodypack transmitter, 2x AA batteries, and user guide. Free 2-YEAR WARRANTY included. | HOW IT WORKS: BLX Wireless Systems provide professional-quality sound with simple setup and an intuitive interface. Choose from a wide range of transmitter form factors (handheld, bodypack, headworn, lavalier, instrument clip-on) and use it with single- and dual-channel, as well as rack-mounted receivers. | WHY IT'S BETTER: PROFESSIONAL WIRELESS MADE EASY. The system is designed to set up quickly, manage simply, and provide legendary Shure audio quality. VERSATILITY INCLUDED. An impressive variety of Shure microphones are available in BLX systems, so you can find the sound that works for you. EXTEND THE STAGE. The system operates up to a range of 300 feet, so you can take the show into the crowd without interruption. | QUALITY THAT'S IN THE DETAILS: System includes choice of Shure microphone, transmitter, and receiver. Choice of receiver type for portability or to install on site or in rack. Transmitters work for up to 14 hours on two AA batteries. Runs up to 12 systems per frequency band.

For this wireless system component to work, please make sure your transmitter and receiver match in frequency range (style) | For proper operation, set each transmitter to a different channel on the receiver. Consult your BLX Channel guide to select compatible channel sets. | Adjustable gain control; Power and battery status LED | Quick & easy frequency matching | 2 AA batteries (included) provide up to 14 hours of continuous use

For this wireless system component to work, please make sure your transmitter and receiver match in frequency range (style) | Pairs with BLX4, BLX4R or BLX88 receivers (not included). | Power and battery status LED. Adjustable gain control | Quick & easy frequency matching. 300 feet (91 m) operating range (line of sight) | 2 AA batteries (included) provide up to 14 hours of continuous use. Receiver and transmitter must be in the same frequency

For this wireless system component to work, please make sure your transmitter and receiver match in frequency range (style) | Pairs with BLX4, BLX4R or BLX88 receivers (not included). | Power and battery status LED. Adjustable gain control | Quick & easy frequency matching. 300 feet (91 m) operating range (line of sight) | 2 AA batteries (included) provide up to 14 hours of continuous use. Receiver and transmitter must be in the same frequency

Before purchasing, please ensure that the wireless frequency band you select works in your area. | Includes BLX4 wireless receiver, BLX2/B58 handheld transmitter with integrated BETA 58A supercardioid dynamic microphone capsule, microphone clip, padded zipper case and user guide | The BETA 58A dynamic vocal microphone is precision-engineered for live performance and project studio recording. A tailored frequency response accentuates vocals, and the supercardioid pattern isolates from other sound sources. It combines simple setup and an intuitive interface for performance you can trust. | 300 feet (91 m) operating range (line of sight) | Quick & easy frequency matching | Adjustable gain control | Power and battery status LED | When performance is set free from wires, it can go to exciting places. But noise and dropouts can stop it cold. BLX Wireless makes it simple to get great sound out of a dependable wireless system. And when you can go wireless without worry, you can perform without limits.

Includes: (1) GLXD4 Wireless Receiver, (1) GLXD2 Handheld Transmitter with SM58 Cardioid Microphone, (1) Microphone Clip, (1) PS42US Power Supply, (1) SB902A Rechargeable Lithium-Ion Battery, (1) USB Charge Cable and (1) Carrying Case | Operate up to 4 compatible systems in typical setting, up to 8 maximum under ideal conditions | Best-in-class intelligent lithium-ion battery rechargeability allows up to 16 hours of continuous use and greatly reduces the cost of ownership | LINKFREQ Automatic Frequency Management | Intelligent frequency management quickly identifies the best open frequencies

VOICE ISOLATION TECHNOLOGY - The MV7X features the same impressive combination of dynamic cartridge, cardioid pick-up pattern and shock mount as the MV7. Have confidence that your MV7X will bring your voice to the forefront of the recording and reject any unwanted background noise for perfect recordings in imperfect rooms. | TRUSTED HERITAGE, CLASSIC DESIGN - Designed with podcasters in mind and modeled from the legendary SM7B for integration into any podcasting set up and workflow. | XLR OUTPUT - Connect to all professional interfaces with ease via XLR without the need to add an in-line pre-amp for additional gain. | MIC STAND COMPATIBLE - MV7X contains 5/8? threaded yoke to attach to any 5/8? threaded mic stand. Also included in the box is 5/8? to 3/8? Euro thread adapter for compatibility with most mic stands. | PODCASTING & VOCAL RECORDING - Designed with podcasters and vocalists in mind, using the same form factor of the SM7B. Connect directly to any audio interface via XLR and record with the high-quality audio. | MULTIPLE MICS. MINIMUM SPEND - A perfect solution for multi-microphone podcasts on a budget that wish to deliver great sound without compromise. | WHAT?S IN THE BOX - Shure MOTIV MV7X XLR Podcast Microphone with 3/8" - 5/8" Thread Adapter, User Guide, Free 2-Year Warranty

MAC & WINDOWS COMPATIBLE - Record or stream with ease using your Mac or Windows computer and connect using the supplied USB-C and USB-A cables. | REAL-TIME HEADPHONE MONITORING - Ensure that you are getting perfect audio at all times with the direct headphone monitoring output on the MV88+. Connect your headphones or earphones via the 3.5mm connector and set your desired monitor mix within the ShurePlus MOTIV Desktop App. | APP INTEGRATION - Configure your MV88+ using the free ShurePlus MOTIV Desktop App and adjust mic controls such as Gain, EQ, Limiter, Compressor, Monitor Mix and DSP Presets. | DSP PRESET MODES - Want to get recording with one click? Pick from our five DSP Preset Modes in the ShurePlus MOTIV Desktop App for different applications: Instrument, Loud, Flat, Speech and Singing. | MIC STAND COMPATIBLE - 5/8” Swivel mic clip included in the box for perfect mic positioning and compatibility with any 5/8” mic stand. Also included is a 5/8” to 3/8” Euro thread adapter. | TRAVEL FRIENDLY - Small and robust enough to withstand the demands of travel and recording on the move. Protect your MV88+, mic clip and cables on the move with the supplied zipper pouch. | GO MOBILE - Transform the MV88+ Stereo into a Video Kit for use with mobile device. Additional phone accessories required (sold separately). Use MV88+ with your mobile device and configure the mic using the MOTIV apps; available on the App Store and Google Play. | WHAT’S IN THE BOX - Shure MOTIV MV88+ Stereo USB Microphone, 10 ft Micro-B to USB-C Cable, 10 ft Micro-B to USB-A Cable, Swivel Mic Clip (5/8"), AMV88-WS Foam Windscreen, Zippered Pouch, and FREE 2-Year Warranty.

The PGXD2/BETA58 Handheld Wireless Microphone Transmitter works with PGX-D Digital Wireless Systems. | Note: when purchasing separate wireless components, please match their frequency bands to ensure proper system operation | Pairs with Pgxd4 receiver (not included) | With an interchangeable BETA58A microphone cartridge, the PGXD2/BETA58 transmits wireless audio with pure digital clarity and rock-solid reliability. | Power, mute, and battery status LED | Battery life: up to 9 hours. Battery requirements: 2 AA Alkaline or rechargeable batteries | Typical operating distance: 200 ft. (60 M) | 10 dB of adjustable gain | Lockable interface prevents accidental setting changes | Rugged Construction for reliable performance Show after Show

Power, mute, and battery status LED | Up to 9 hours of continuous use from 2 AA batteries | 200 ft. (60 m) operating range | 10 dB of adjustable gain | Lockable interface prevents accidental setting changes

24-bit/48kHz digital technology for incredibly accurate sound | Automatic frequency selection locates a clear channel instantly | One-touch sync automatically syncs the transmitter and receiver | True digital diversity delivers rock-solid wireless signal reliability | Up to 5 systems can be used at once

HOW IT WORKS: What’s the secret to giving you more wireless with less worry? Control. QLX-D lets you streamline setup across multiple receivers, and Wireless Workbench software gives you real-time access, monitoring and control throughout the performance. You can even manage the system from your iOS device for maximum convenience. | WHY IT'S BETTER: TRUE TO THE SOURCE. The 24-bit digital audio and the wide frequency response capture the sound as clearly and accurately as it was produced. PERSISTENT POWER. The rechargeable lithium-ion battery option extends performance on stage, simplifies workflow and saves money versus replaceable alkaline batteries. SECURE SOUND. Confidentiality is ensured via AES-256 advanced encryption that generates a randomized key for each use. | QUALITY THAT’S IN THE DETAILS: Professional-grade metal construction. 64 MHz of tuning bandwidth. Up to 17 compatible systems in 6MHz or 21 channels in 8MHz DTV range. Ethernet networking for control strings, firmware updates, Wireless Workbench 6 and ShurePlus Channels for iOS. Transmitter types include handheld and bodypack. Compatible with ULX-D boundary and gooseneck transmitters.

One unbalanced aux level output (Phono connector) | Five unbalanced aux level inputs (Phono connectors) | One unbalanced aux level output (Phono connector) | Built-in low cut filters on mic inputs | 12V phantom power for condenser microphones | Ideal for the following smaller applications: Meeting rooms, Houses of worship, Broadcast, Educational paging and public address, Sound system rental | Juke Box Muting and "Paging with Ducking" Functions:. Juke Box Mute feature mutes background audio signal when a connected juke box is active. Paging with Ducking allows the SCM268 to be used as a paging mixer | Unit fits into a half-rack space and includes all the necessary rack mounting hardware

SOUND ISOLATING TECHNOLOGY - Own your audio space with sound isolating design that blocks up to 37 dB of noise to eliminate distractions. Enjoy the most immersive listening experience with a design that keeps earphones in and noise out during exercise or travel.It?s the right way to listen and the only way to really hear. | CUSTOMIZED FIT - Includes three sizes (S, M, L) of the flex and black foam sleeves. Experiment with the size and style that creates the best fit for you. | SECURE, OVER-THE-EAR DESIGN - Wireform fit ensures earphones stay in place and cables remain out of the way. | STRIKING FULL-RANGE SOUND - Full range sound from a four high-definition drivers provide extended high-end clarity and unparalleled low-end performance for a state-of-the-art listening experience. Three-way system configuration for dedicated low, mid and high frequency distribution. | DURABLE REINFORCED CABLE - Detachable cable is durable enough to withstand everyday wear, yet allows for easy replacement in case of damage. Gold plated MMCX Connector has a lock-snap mechanism allowing 360-degree rotation for comfortable fit. | COMPACT CARRYING CASE - Convenient, tangle-free solution to store and travel with your earphones. | WHAT'S IN THE BOX: Includes a free two-year warranty, SE846 Detachable Sound Isolating Earphones, two standard 3. 5 mm audio cables (46? and 64?), basic fit kit, expanded fit kit (Yellow foam, Triple flange), 1/8? to ¼? stereo Adapter, removable nozzle Kit plus nozzle tool, carrying pouch, cleaning Cloth and shirt clip.

Cardioid pickup pattern rejects off-axis sound and provides superior gain before feedback | Frequency response tailored for vocals, with brightened midrange and bass rolloff to control proximity effect | Shock-mounted cartridge for exceptional ruggedness and reduced handling noise | Built-in "pop" filter that reduces explosive breath sounds and wind noise | Supplied stand adapter and carrying/storage bag

Consumer Alert: Most users do not need a license to operate this wireless microphone system. Nevertheless, operating this microphone system without a license is subject to certain restrictions: the system may not cause harmful interference; it must operate at a low power level (not in excess of 50 milliwatts); and it has no protection from interference received from any other device.

This cable features a lock ring TA4F connector, gold-plating for better conductivity and corrosion resistance, and a right-angle 1/4" plug for added functionality and aesthetics. | Gold-plated Right-Angle 1/4" Plug, better Conductivity and corrosion resistance, lower profile for improved aesthetics, less likely to get in the way or to be pulled out in certain applications | Lock Ring TA4F Connector, a more secure fit with Shure body packs. | 3 feet (91 cm) in length