Rearview mirror rod radar detector bracket is made of all aluminum alloy material, which is well made and has a sturdy structure, will not sway or vibrate during driving. | Spherical area can be freely adjusted to keep the radar detector in its optimal position. | When installing the middle screw of the bracket, be sure to align it with the small hole inside.Multiple 1/4 threaded ports are designed at the handle of the bracket to facilitate expansion of different devices. | Compatible only with Escort MAX / MAX2 / Older MAX 360 Series (2015-2019) Radar Detector, NOT for 2020 Max360 or MAX360C, Not applicable to radar mount with magnetic connection. | Please note that before purchasing, please confirm that there is at least 0.5 inches of clear rod space for the rearview mirror rod to install this bracket.

Radar detector rearview mirror rod bracket is made of all aluminum alloy material, which is durable | After fixing the position, please use a hexagonal wrench to tighten the screws, spherical connection adapter will be permanently fixed in the optimal ideal position and will not sag or shake during driving | Rearview mirror bracket has strong expandability and can be connected to any 0.63 inch diameter rotating ball adapter at the ball head. The handle is equipped with a 1/4 interchangeable 3/8 adapter screw for easy expansion of different devices | No More Troublesome Suction Cups.Safe and never falling off. Free to rotate | We provide you with additional connection adapter, If the length of the connection adapter is not appropriate, please use a small tool to remove and replace another one. Both models are designed for Uniden radar detectors

For Whistler Radar Detector Titan CR65 CR 70 CR75 CR80 CR85 CR90 CR93 XTR Pro DE17xx XTR2xx XTR3xx XTR4xx XTR5xx XTR6xx,Only applicable to all Whistler radar models. | SIMPLE structure and FRIENDLY design, suction cup holder is rotary switch and equipped with an adjustment knob to easily lock the optimal position of the detector. | Under all weather conditions (extremely hot/cold/wet/dry), its powerful vacuum suction can firmly adhere to the windshield or dashboard. | Suction cup base is made of ABS material, and the connecting adapter is made of alloy material, which is durable. | Bottom glue of the suction cup thickened and has a dual suction force,super strong adsorption force will last for long time. After experimental testing, the suction cup bracket can bear 11 pounds.

The rear-view mirror rod bracket of radar detector is made of all-aluminum alloy material, and the surface is anodized to improve corrosion resistance and wear resistance, which is durable. | It has powerful scalability and multi-function. Any rotating ball adapter with a diameter of 0.63 inch can be converted at the ball head. The handle is equipped with a 1/4 interchangeable 3/8 adapter screw for easy expansion of different devices. | No More Troublesome Suction Cups. There is no need to worry about falling off,The ball can tilt and rotate freely. The rubber ring on the supporting ball increases friction, and realizes the locking release adjustment with damping. | After fixing the rearview mirror bracket, please use the provided wrench to help the handle to tighten the screw. | Compatible with the following radar models:Rocky Mountain Phantom-T,Escort,Beltronics,including S75 S55,New Passport,STi Magnum,STi Driver,GX65,GX55,RX65,RX55,V6,V8,V10,V12,Pro 100,Pro 200,Pro 300, Pro 500, Vector 995, Vector 965, Vector 955, Newer Vector 940, Vector 895, Express 795, Passport 9500ix,Passport 9500i,Passport 8500x50,Passport 8500,Solo S2,Solo S3,Solo RD-5110,Passport 7500S, Passport 7500, 6800, 5000, 4600, 4500,4200 (Not applicable to Escort Passport MAX series)

The installation of the radar rearview mirror pole bracket can be completed in just a few minutes | Ball head design allows you to adjust the optimal position of the radar detector 360 degrees | After experimental testing,the installation base of the rearview mirror is stable and firm during driving,and the radar detector will not shake | Please ensure that there is at least 0.4 inches of valve stem space for the rearview mirror rod to install this bracket (not compatible with vehicles with short valve stems) | Compatible with Escort MAX,MAX2,2015-2019 MAX 360 radar detectors(not suitable for 2020 Max360,MAX360C radar and unlisted models)

Compatible with most cobra radar detectors,the width of the connection of the suction cup bracket is 0.86 in,please carefully check the size of the radar detector insertion before purchasing. | The rearview mirror mounting base is made of ABS environment-friendly raw materials, The radar detector mount ball joint adapter is made of alloy materials,The surface is anodized to improve corrosion resistance, wear resistance and heat resistance | No More Troublesome Suction Cups and Install in Most Cars min Minutes PLEASE MAKE SURE THAT YOU HAVE AT LEAST 1 INCH OF STEM SPACE TO INSTALL THIS MOUNT (Not Compatible w/Corvette & vehicle with short stem) | The rear view mirror radar detector mount is easy to install and can be easily used in the second vehicle without tools | Brand New in Package（Manufacturer direct replacement warranty）

Wide compatibility: Escort Passport 9500ix 9500i 8500 8500x50 S55 S75g Solo S2 S3 S4 Beltronics GX65 RX65 Rocky Mountain Phantom-T Radar Detectors (Not applicable to Escort Passport MAX series). | No More Troublesome Suction Cups and Install in Most Cars min Minutes PLEASE MAKE SURE THAT YOU HAVE AT LEAST 1 INCH OF STEM SPACE TO INSTALL THIS MOUNT (Not Compatible w/Corvette & vehicle with short stem) | The rearview mirror mounting base is made of ABS environment-friendly raw materials, The radar detector mount ball joint adapter is made of alloy materials,The surface is anodized to improve corrosion resistance, wear resistance and heat resistance | The rear view mirror radar detector mount is easy to install and can be easily used in the second vehicle without tools | Brand New in Package（Manufacturer direct replacement warranty）

suction cup mount has excellent performance in extremely hot and cold weather conditions, and its powerful vacuum suction can be firmly attached to the windshield or dashboard. | Easy to install, suction cup mount designed as a special rotary switch. With the adjustment knob, it can lock the optimal position of the radar detector to make it perfectly match the spacing of the windshield.Please tear off the protective film of the suction cup before use and stick it on a clean and smooth surface to obtain the strongest suction. | Radar detector suction cup mount is made of ABS+alloy material, which is durable. The suction cups can be washed repeatedly and air-dried restore suction. | Compatible with following Uniden Radar Detectors：R1, R2, R3, R4, R7, LRD300, LRD350, LRD400, LRD450, LRD500, LRD550, LRD600, LRD650, LRD700, LRD750, LRD800, LRD850, LRD900, LRD937, LRD950, LRD6199, LRD6499 SW, DF1, DFR2, DFR3, DFR4, DFR5, DFR6, DFR7, DFR8, DFR9. | We provide you with an additional connection adapter, If the length of the original suction cup connection is not appropriate, please use small tools to disassemble and replace the other one, Both models are designed for the Uniden radar detector.

Compatible only with Uniden radar detectors, including Uniden R1, R2, R3, R4, R5, R6, R7, LRD300, LRD350, LRD400, LRD450, LRD500, LRD550, LRD600, LRD650, LRD700, LRD750, LRD800, LRD850, LRD900, LRD937, LRD950, LRD6199 SW, LRD6499 SW, DF1, DFR2, DFR3, DFR4, DFR5, DFR6, DFR7, DFR8, DFR9, Not suitable for models not listed. | Before using the rearview mirror plug cable, please ensure that your radar detector connection port is RJ11 jack. | Rearview mirror rod radar bracket is stable and firm during driving, without worrying about falling off, and will not shake or vibrate. | Cable has a built-in fuse, making the power line connection of the radar detector more stable. | Packaging list: 1, Radar detector mirror mounted aluminum bracket × 1 (disassembling accessories);2, rearview mirror plug cable × 3 (Strap × 3); 3, Instructions.

No More Troublesome Suction Cups.Safe and never falling off. Free to rotate. | Radar detector rearview mirror rod bracket is made of all aluminum alloy material, which is durable. | Rearview mirror bracket has strong expandability and can be connected to any 0.63 inch diameter rotating ball adapter at the ball head. The handle is equipped with a 1/4 interchangeable 3/8 adapter screw for easy expansion of different devices. | After fixing the position, use a hexagon wrench to help easily lock the handle. | Rearview mirror radar detector mount is only compatible only with Escort MAX / MAX2 / Older MAX 360 Series (2015-2019) ,Not for 2020 Max360 or MAX360C, Not applicable to radar mount with magnetic connection.