【HDMI ARC function】 (The TV must have an ARC port, otherwise it cannot be used). Extract audio from your TV to Soundbar or Amplifier via the TV's ARC port. Use HDMI cable or Micro cable to connect one end to TV ARC port, one end to HDMI ARC Converter, then connect L/R or 3.5mm to sound bar, speaker, home theater, A/V receiver, etc. | 【2 Ways to use】1. Insert the HDMI cable into the ARC port of the TV, plug the other end into the HDMI ARC adapter, connect the power supply, connect the R/L or 3.5mm to the audio device, and finally set the TV audio output. 2. Using the matching Micro cable, insert the USB port of the Micro cable into the TV, insert the other end into the ARC adapter (also power supply), connect the R/L or 3.5mm to the audio device, and finally set the TV audio output. (USB sound card function) | 【192KHz sampling rate】Built-in CEC volume control protocol, the TV remote control can adjust the volume. Effectively solve the defects of similar products. Support 32, 44.1, 48, 96, 192KHz sampling rate, 24-bit left and right channels. (HDMI 2.0 cable recommended). | 【USB sound card function】It can be inserted into the computer device through the USB end of the micro cable, and the other end is connected to the ARC box, and the audio output is output through the ARC box. Can be used as a computer external sound card. Solve the problem that the computer has no sound card or the sound card is damaged. | 【Digital Noise Reduction】Using high-end chips, digital noise reduction technology, signal gain technology, dual signal processing, the sound quality is clear and pleasant. The aluminum alloy shell has good heat dissipation and durability. Support multi-channel simultaneous audio output, sound synchronization without delay. No driver, plug and play.

【DP 4K 60hz output】Using DP 1.2 technology, the maximum support 4K@60hz YUV4:4:4 (3840 x 2160), 2K@144hz (2560 x 1440), HDR10. Note: This product is not equipped with a DP cable. It is recommended to purchase a DP1.4 cable. Actual test can reach 2K@144Hz. Using the DP1.4 cable also avoids screen flicker problems. | 【2 Port DP KVM switch】2 DP+2 USB input/3 USB output/1 DP output. Only one set of controls can control two computers. It's perfect for workstations, offices, or wherever you need to multitask between computers. You can easily switch and control USB devices and DP monitors on two computers at the same time.Note: This product is not equipped with a DP cable. It is recommended to purchase a DP1.4 cable The actual test with DP1.4 cable can reach 2K@144Hz. | 【High-end chips, no power supply】Imported chips are used to increase the compatibility range, improve the stability between KVM and DP devices, and avoid flickering black screen phenomenon. The 2 USB-B ports not only support printer data transmission, but also power supply to the device. No additional power supply is required for daily use. But long-distance transmission or using high-power devices requires power, so we provide 1 USB power cable, you just need to find a household 5V1A plug. | 【Support two switching methods】1. Support manual switch of the host. 2. Support extension cord control switch. Plug and play, no driver installation required. Please make sure to plug DP in 1 and USB in 1 to the same host. DP 1 in corresponds to USB 1 in. Mixed insertion of DP 1 in and USB 2 in is not supported. | 【Plug and play】Windows 10/8/7/XP/Vista (32/64 bit), Mac, Linux, Sun Solaris, DOS, Win3, WINNT, Netware and Unix. Plug and play, no driver installation is required.