Type: IDE 40-Pin Male to Female Extension Cable Cord | Cable Length: 6-inches ( 15.2 Centimeters ) | Compatible for such as 3.5inch IDE interface Hard Drives, 5.25inch IDE CD and DVD. NOT For any LCD or Monitors | Not Compatible with 2.5inch PATA Hard Drives, please note | Please Note: 40Pin equals 39PIN and 1x Empty Position which is Fool-proof design, to avoid anti-plug.
🌞RIITOP M.2 NVMe to PCIe Adapter Allows adding NVMe SSD Hard Drive to your PC Desktop at perfect performance | 🌞Compatible with M.2 SSDs (PCI-e NVMe): 80x22mm, 60x22mm and 42x22mm. Hardware Requirement: Available 4x/8x/16x Slot on Mainboard | 🌞Designed with Heat Sink up-cover, it will strengthen the effect of heat dissipation to protect your NVMe SSD well! | 🌞Please NOTE: 1. This M.2 PCIe adapter can Only Support M.2 PCI-e Based M Key Nvme SSD, DO NOT support PCI-e M Key AHCI SSD, SATA based B+M key or B Key SSD. 2. Please download driver of SSD from the brand official website if "Disk Management" or "Device Management" can not show the SSD. 3. Old MB can not support Booting from "NVMe", Please confirm the MB's specification | 🌞Package including: 1x M2 NVMe PCIe Adapter with Heatsink, 3x Silicone Thermal pad, 1x Screwdriver, Spare Screws, 1x User Manual
RIITOP Quad NVMe PCIe Adapter allows you add 4x NVMe SSDs simultaneously via 1x PCI-e 4.0 or 3.0 x16 Slot on MOBO which supports PCI-e PCIe x16 Bifurcation. Full-speed transmission up to 4x 32Gbps | Hardware requirement: 1. There is available PCI-e 4.0 or 3.0 x16 Slot on Mobo 2. The motherboard can support PCIe x16 Bifurcation itself, and can be set as"PCI-e x4x4x4x4" in BIOS 3. All of the SSDs are M.2 (M Key) NVMe SSD 4. CPU has enough channels to support | Designed with Fan, it will avoid SSDs working at low speed due to high Temperature; and individual LED Indicator will show each SSD's Working Status | Compatible with M.2 PCI-e NVMe SSDs: 80x22mm, 60x22mm and 42x22mm, 30x22mm; Not support any M.2 (SATA-Based B+M Key) SSD; Motherboard Compatibility: Most Server and X299, X399 can support PCIe x16 Bifurcation | Please note: RIITOP 4x NVMe PCIe Adapter does not Support Hardware Raid, only supports the formation of soft raid in Win10 , or you may build raid via Third-party Software, and 4 SSDs should be same model 2. The motherboard need support "PCIEX16 Bifurcation", Otherwise, only one M.2 SSD can be recognized. Please check Motherboard's user manual on its official website if you are not sure the Mobo can support
RIITOP Quad PCIe NVMe Adapter allows you add 4x NVMe SSDs simultaneously via available PCI-e 4.0 or 3.0 x16 Slot on Motherboard which supports PCIe x16 Bifurcation. Full-speed transmission up to 4x 32Gbps | Hardware requirement: 1. There is available PCI-e 4.0 or 3.0 x16 Slot on Mobo 2. The motherboard can support PCIe x16 Bifurcation itself, and can be set as"PCI-e x4x4x4x4" in BIOS 3. All of the SSDs are M.2 PCI-e (M Key) NVMe SSD 4. CPU has enough channels to support | Upgraded Design: Designed with 0.32inch Heatsink, it will avoid SSDs working at low speed due to high Temperature, but it will not take up more space from other PCIe slots; And individual LED Indicator design will show each SSD's Working Status Compatible with M.2 PCI-e NVMe SSDs in all sizes:80x22mm, 60x22mm and 42x22mm, 30x22mm; Not support any M.2 (SATA-Based B+M Key) SSD; Motherboard Compatibility: Most Server and X299, X399 can support PCIe x16 Bifurcation | Compatible with M.2 PCI-e NVMe SSDs in all sizes:80x22mm, 60x22mm and 42x22mm, 30x22mm; Not support any M.2 (SATA-Based B+M Key) SSD; Motherboard Compatibility: Most Server and X299, X399 can support PCIe x16 Bifurcation | Please note: RIITOP 4x NVMe PCIe Adapter does not Support Hardware Raid, only supports the formation of soft raid in Win10 , or you may build raid via Third-party Software, and 4 SSDs should be same model 2. The motherboard need support "PCIEX16 Bifurcation", Otherwise, only one M.2 SSD can be recognized. Please check Motherboard's user manual on its official website if you are not sure the Mobo can support
[Dual NVMe PCIe Adapter] RIITOP Dual NVMe PCIe Adapter can add 2x M.2 NVMe SSD Slot via PCIe 4.0 x16, but also expaind extra PCIe x16 slot (x8 Signal), which can use for expanding any other PCIe Device | Hardware requirement: 1. There is available PCI-e 4.0 or 3.0 x16 Slot on Mobo 2. The motherboard can support PCIe x16 Bifurcation itself, and can be set as"PCI-e x8x4x4" in BIOS 3. All of the SSDs are M.2 PCI-e (M Key) NVMe SSD 4. CPU has enough channels to support | Compatible with M.2 PCI-e NVMe SSDs in all sizes:110x22mm, 80x22mm, 60x22mm and 42x22mm, 30x22mm; Not support any M.2 (SATA-Based B+M Key) SSD; Motherboard Compatibility: Most Server and X299, X399 can support PCIe x8x4x4 Bifurcation | Upgraded Design: 1. Two Slots of NVMe SSD are on positive and negative sides. So the card is in small size, And individual LED Indicator design will show each SSD's Working Status 2. The more PCIe x16 Slot is very useful when there is no more PCIe Slot on motherboard | Please note: 1. RIITOP 2-Port NVMe PCIe Adapter does not Support Hardware Raid, only supports the formation of soft raid in Win10 , or you may build raid via Third-party Software, and 2 SSDs should be same model 2. The motherboard need support "PCIe x8x4x4 Bifurcation", all of the slots will works in full speed. If MOBO only supports "x4x4x4x4", the expanded PCIe x16 will only have x4 signal. If MOBO does not support"PCIe Bifurcation" , Only the PCIe x16 works, None M.2 SSD can be recognized. 3. Please check Motherboard's user manual on its official website if you are not sure the Mobo can support