Easily connect additional displays, sensors or other components to your NMEA 2000 (N2k) backbone. | Technical Data: | Insulation Resistance: DC500V±10%, test for 1 minute and the insulation resistance should be more than 100MΩ | Durability: 4000 cycles insertion/extraction cycles at a maximum rate of 200 cycles per hour. | Waterproof Test (IP67): Submersion in water, 1 meter for 24 hours.

0.25 Meter (10 inches) Use between two cable connectors of the same gender. Overcomes the problem of connecting devices or cables which have the same gender of connector on an NMEA 2000 backbone. | Use this cable to convert an exposed MALE connector to an exposed FEMALE connector. | NMEA 2000 Certified, 100 percent universal and compatible with other manufacturers' products. | Black Cable (22AWG/2C and 24AWG/2C) shielded to reduce interference. | The cable is terminated with two FEMALE NMEA 2000 connectors made with gold-plated contacts for corrosion resistance. | Waterproof Test (IP67): Submersion in water, 1 meter for 24 hours.

0.25 Meter (10 inches) Use between two cable connectors of the same gender. Overcomes the problem of connecting devices or cables which have the same gender of connector on an NMEA 2000 backbone. | Use this cable to convert an exposed FEMALE connector to an exposed MALE connector. | NMEA 2000 Certified, 100 percent universal and compatible with other manufacturers' products. | Black Cable (22AWG/2C and 24AWG/2C) shielded to reduce interference. | The cable is terminated with two MALE NMEA 2000 connectors made with gold-plated contacts for corrosion resistance. | Waterproof Test (IP67): Submersion in water, 1 meter for 24 hours.

1/2 meter (19 inches) backbone/drop cable. Use for connecting sensors or displays to an NMEA 2000 network, or to extend the N2K backbone cable. | NMEA 2000 Certified, 100 percent universal and compatible with other manufacturers' products. | Black Cable (22AWG/2C and 24AWG/2C) shielded to reduce interference. | The cable is terminated with NMEA 2000 connectors made with gold-plated contacts for corrosion resistance. | Waterproof Test (IP67): Submersion in water, 1 meter for 24 hours.

10 foot backbone/drop cable. Use for connecting sensors or displays to an NMEA 2000 network, or to extend the N2K backbone cable. | NMEA 2000 Certified, 100 percent universal and compatible with other manufacturers' products. | Black Cable (22AWG/2C and 24AWG/2C) shielded to reduce interference. | The cable is terminated with NMEA 2000 connectors made with gold-plated contacts for corrosion resistance. | Waterproof Test (IP67): Submersion in water, 1 meter for 24 hours.

10 meter (32ft 8 inches) backbone/drop/extension cable. Use for connecting sensors or displays to an NMEA 2000 network, or to extend the N2K backbone cable. | NMEA 2000 Certified, 100 percent universal and compatible with other manufacturers' products. | Black Cable (22AWG/2C and 24AWG/2C) shielded to reduce interference. | The cable is terminated with NMEA 2000 connectors made with gold-plated contacts for corrosion resistance. | Waterproof Test (IP67): Submersion in water, 1 meter for 24 hours.

2 meter (6 ft 6 inches) backbone/drop cable. Use for connecting sensors or displays to an NMEA 2000 network, or to extend the N2K backbone cable. | NMEA 2000 Certified, 100 percent universal and compatible with other manufacturers' products. | Black Cable (22AWG/2C and 24AWG/2C) shielded to reduce interference. | The cable is terminated with NMEA 2000 connectors made with gold-plated contacts for corrosion resistance. | Waterproof Test (IP67): Submersion in water, 1 meter for 24 hours.

25 foot backbone/drop/extension cable. Use for connecting sensors or displays to an NMEA 2000 network, or to extend the N2K backbone cable. | NMEA 2000 Certified, 100 percent universal and compatible with other manufacturers' products. | Black Cable (22AWG/2C and 24AWG/2C) shielded to reduce interference. | The cable is terminated with NMEA 2000 5-pin connectors made with gold-plated contacts for corrosion resistance. | Waterproof Test (IP67): Submersion in water, 1 meter for 24 hours.

2-Pack of NMEA 2000 Blanking Caps. | Used to protect unused female connectors from dust and moisture. | These have a screwdriver slot and fit the standard threads used on single, 2-port, 3-port and 4-port NMEA 2000 tee-connectors.

Easily connect two additional displays, sensors or other components to your NMEA 2000 (N2K) backbone cable. | NMEA 2000 Certified, 100 percent universal and compatible with other manufactures' products. | These high quality connectors are manufactured with gold-plated contacts for corrosion resistance. | Waterproof test (IP67) Submersion in water, 1 meter for 24 hours.

3 meter backbone/drop cable. Use for connecting sensors or displays to an NMEA 2000 network, or to extend the N2K backbone cable. | NMEA 2000 Certified, 100 percent universal and compatible with other manufacturers' products. | Black Cable (22AWG/2C and 24AWG/2C) shielded to reduce interference. | The cable is terminated with NMEA 2000 connectors made with gold-plated contacts for corrosion resistance. | Waterproof Test (IP67): Submersion in water, 1 meter for 24 hours.

Easily connect three additional displays, sensors or other components to your NMEA 2000 (N2K) backbone cable. | NMEA 2000 Certified, 100 percent universal and compatible with other manufactures' products. | These high quality connectors are manufactured with gold-plated contacts for corrosion resistance. | Waterproof test (IP67) Submersion in water, 1 meter for 24 hours.

4 meter (13 foot) backbone/drop cable. Use for connecting sensors or displays to an NMEA 2000 network, or to extend the N2K backbone cable. | NMEA 2000 Certified, 100 percent universal and compatible with other manufacturers' products. | Black Cable (22AWG/2C and 24AWG/2C) shielded to reduce interference. | The cable is terminated with NMEA 2000 connectors made with gold-plated contacts for corrosion resistance. | Waterproof Test (IP67): Submersion in water, 1 meter for 24 hours.

Easily connect up to 4 additional displays, sensors or other components to your NMEA 2000 (N2K) backbone cable. | NMEA 2000 Certified, 100 percent universal and compatible with other manufactures' products. | Waterproof Tested (IP67), 1 meter for 24 hours.

5 meter (16 ft, 4 inches) backbone/drop cable. Use for connecting sensors or displays to an NMEA 2000 network, or to extend the N2K backbone cable. | NMEA 2000 Certified, 100 percent universal and compatible with other manufacturers' products. | Black Cable (22AWG/2C and 24AWG/2C) shielded to reduce interference. | The cable is terminated with NMEA 2000 connectors made with gold-plated contacts for corrosion resistance. | Waterproof Test (IP67): Submersion in water, 1 meter for 24 hours.

6 meter (19ft 8 inches) backbone/drop cable. Use for connecting sensors or displays to an NMEA 2000 network, or to extend the N2K backbone cable. | NMEA 2000 Certified, 100 percent universal and compatible with other manufacturers' products. | Black Cable (22AWG/2C and 24AWG/2C) shielded to reduce interference. | The cable is terminated with NMEA 2000 connectors made with gold-plated contacts for corrosion resistance. | Waterproof Test (IP67): Submersion in water, 1 meter for 24 hours.

Use this engine interface cable with the included Tee-Connector to connect the Evinrude outboard engine to your NMEA 2000 network. | With this cable, you will be able to capture and display: RPM, alternator voltage, engine hours, engine temperature, fuel pressure, fuel rate, oil pressure and water pressure. | This cable is 100% compatible with Lowrance 000-0120-62 Evinrude Engine Interface Cable and Evinrude part numbers 764164 and 7676026.

Use the male or female NMEA 2000 field-installable connectors to create custom-length drop cables and backbone extension cables. | In hard to access areas, make it much easier to run NMEA 2000 cables, by cutting off the original end connector, running the cable and then installing a NMEA 2000 field-installable connector. | Use at the foot of the mast for easy connection/disconnection, of the mast cables for mast mounted NMEA 2000 sensors, to the backbone. | For NMEA 2000 pinout information, see the pinout image in this listing. This is the FEMALE connector.

A male and a female 120 ohm resistor is essential to terminate each end of the NMEA 2000 backbone. This is the FEMALE terminator. DO NOT use more than one pair of terminators on your network. | These NMEA 2000 resistor terminators are waterproof and dustproof and designed for use in the marine environment. | NMEA 2000 Certified, 100 percent universal and compatible with other manufacturers' products.

Use the male or female NMEA 2000 field-installable connectors to create custom-length drop cables and backbone extension cables. | In hard to access areas, make it much easier to run NMEA 2000 cables, by cutting off the original end connector, running the cable and then installing a NMEA 2000 field-installable connector. | Use at the foot of the mast for easy connection/disconnection, of the mast cables for mast mounted NMEA 2000 sensors, to the backbone. | For NMEA 2000 pinout information, see the pinout image in this listing. This is the MALE connector.

One male and one female resistor terminator to terminate each end of the NMEA 2000 backbone. | Use these resistor terminators for proper termination of an NMEA 2000 network. | NMEA 2000 Certified, 100 percent universal and compatible with other manufacturers' products.