Raspberry pi 3 model b adds wireless LAN and Bluetooth connectivity making it the ideal solution for powerful connected designs. | Raspberry pi 3 use Processor chipest Boardcom BCM 2837 64 bIT ARMv7 Quad Core processor powered Singel Board Computer running at 1200MHz | Raspberry pi 3 model b RAM : 1GB SDRAM@400MHz
This 7" Touchscreen display for the Raspberry Pi is perfect for creating portable and embedded projects where a keyboard and Mouse would be in the way. | The full color display outputs up to 800 x 480 and features a capacitive touch sensing capable of detecting 10 fingers. | Only two connections from the Pi TO the Display are necessary; power from GPIO (or USB) connection to the DSI port. The adapter board handles power, Signal conversion, and touch input conversion. | Kit contents: 7" Touchscreen display adapter board DSI ribbon cable 4 x stand-offs and screws 4 x jumper wires
Raspberry Pi Zero W Motherboard Only | SoC: Broadcom BCM2835--CPU: ARM11 running at 1GHz--RAM: 512MB | Wireless: 2.4GHz 802.11n wireless LAN (WiFi),Bluetooth: Bluetooth Classic 4.1 and Bluetooth LE | Dimensions: 65mm × 30mm × 5mm
The official Raspberry Pi 5 case| Integrated temperature-controlled cooling fan that connects to the fan connector on Raspberry Pi 5 |2mm × 17mm × 4mm heatsink with self-adhesive pad improves heat transfer from the processor|Easily removable lid exposes fan and breakout slot for cables and GPIO|Integrated mounting features allow for case stacking| HATs can be mounted to the enclosure with stand-offs and GPIO header extenders (not included) |Four silicone feet for the case are included| Input voltage: 5V DC supplied via four-pin fan header on Raspberry Pi 5 | Fan speed control: Pulse width modulation control with tachometer| Maximum airflow: 2.79 CFM| Maximum fan speed: 8000 RPM +/- 15%| Case material: ABS (base frame lid) and PC (fan assembly)
Fits perfectly into the Raspberry Pi 5 board|Single-piece anodised aluminium heatsink|Heatsink-mounted temperature-controlled blower fan attached by three screws|Spring-loaded push pins for mounting onto Raspberry Pi 5 | Pre-applied thermal pads for heat transfer | Input voltage: 5V DC supplied via four-pin fan header on Raspberry Pi 5 | Fan speed control: Pulse width modulation control with tachometer | Maximum airflow: 1.09 CFM | Maximum fan speed: 8000 RPM +/- 15%| Product material: Anodised aluminium
RP2040 microcontroller chip designed by Raspberry Pi in the United Kingdom | Dual-core Arm Cortex M0+ processor, flexible clock running up to 133 MHz | 264KB of SRAM, and 2MB of on-board Flash memory | Castellated module allows soldering direct to carrier boards | 26 × multi-function GPIO pins