How to Use: 1,Add professional fog liquid(not included) into tank. Make sure the metal juice is totally immersed into fog juice. Otherwise, the device won't work properly. 2,Connect the wired remote console into the machine. The wired remote console needs to be connected to the fog machine all the time when you use the fog machine because the wired console is doubled as an infrared receiver for the wireless remote. 3,Switch on the machine. It begins preheating. Red light will show on wired remote when the machine has preheated successfully. 4,You can press and hold the button on the wired remote control or press the UNLOCK button of the wireless remote control as you like to emit fog for up to 30s per cycle. Then wait about 1 mins for next preheating. 5,As for the wireless remote, a short press of the UNLOCK button can send a blast of fog up to 30s and a short press of the LOCK button can stop spraying. 6,As for the wired remote, you need to PRESS AND HOLD the red button to produce fog. If you release the button, it will stop spraying immediately. Note: 1.Always check whether there is enough fog fluid in the tank before each use to avoid danger. 2.It is ideal for use indoor or outdoor and has no timer. Specifications: Power: 400W Voltage : AC 110V/60Hz Tank Capacity: 10oz/300ml Liquid Consumption: 7.5ml/min Heat Up Time: 3-4 mins Output: 2000cu.ft/min Spray distance: 3m/9.8ft Wireless Remote distance: 14m/45ft Wired Remote Length: 2.5m/8.2ft Weight: 4lbs Dimension:9.5x4.3x4.7in Package: 1 x Fog Machine, 1 x Wireless Remote Control, 1 x Wired Remote Control, 1 x Power Supply Cord, 1 x Handle, 2 x Screw, 1 x User Manual