Instantly add Gigabit PoE to any network switch or router | Extend power up to 328 feet (100 meters) to a single PoE device | All inclusive kit to provide PoE power for one 802.3af device with up to 15 watt budget | Passive Mode B operation (pins +4,5/-7,8) is "always on" | Backed by 1 year warranty - For expert technical support from Austin, TX please call 512 479 0317

Convert and split PoE+ or Power over Ethernet into 12 volt DC power up to 25 watts and Gigabit data using this PoE+ splitter. Power 12 volt Single Board Computers, Tablets, and IEEE 802.3at PTZ Cameras with PoE at 12 volts. | Use this gigabit splitter device with your existing 802.3at PoE+ switch or 48v PoE injector to power 12 volt non-PoE devices. Try it with our 48v 60w injector to provide 25 watts of continuous 12 volt power to any device. | This 12v power splitter with mounting tabs is perfect for mounted powering of non-PoE devices at a distance up to 328 feet away and capable of offering a more secure network via direct Ethernet. Compatible with Arduino, Echo Dot 3, Arlo Pro Base Station, Foscam, and more. | Our network-friendly inline 12v splitter deploys opto-isolation technology to isolate and protect devices, with optional mounting tabs to enhance security of installations. Delivers 10/100/1000 Gigabit data on the RJ45 port with a 2.1mm x 5.5mm female DC connector. | All PoE Texas products are backed by a One Year replacement warranty and a 30 Day, no questions asked, return policy. Expert help is only a phone call away. Please call 512 479 0317 for assistance.

On demand PoE for 802.3af and 802.3at devices like VoIP phones, WiFi access points, IP cameras and more | Instantly deliver power and data for up to 4 devices with your existing network switch - 10/100/1000 Gigabit capability | Active auto-negotiation for on demand power only when a compatible device is connected | Includes a 48 volt 60 watt UL/CE/FCC certified power supply for 802.3af/at applications

Simplify installations with a multi-port midspan injector PoE adapter. Our 8 port PoE injector features 8 Data In (LAN) ports with 8 Data + Power Out (PoE) ports. Includes a compatible PoE injector 48V 60W power supply. | Supply continuous Power over Ethernet for up to 8 passive 802.3af or 802.3at devices like VoIP phones, WiFi access points, IP cameras, and other low voltage devices. Always check manufacturer specifications for compatibility verification. | PoE injector compatible with IEEE 802.3af or at devices. Mode B Negotiation delivers power on pins 4,5(+) / 7,8(-). Passive "Always On" power means all devices receive the same voltage (48v). | Plug and play. This midspan PoE injector is compatible with your 10/100 Mbps network switch or router, delivering Fast Ethernet standards with no loss of signal quality via 8 Data In ports and 8 Data + Power out ports. | All of our PoE products are backed by a 1-Year replacement warranty and a 30-Day, no questions asked, return policy. Expert help is only a phone call away. Please call 512 479 0317 for assistance.

Instantly upgrade your current network switch to PoE+. This PoE+ injector extends 52v Power over Ethernet up to 328 feet via ethernet cable. A passive PoE injector always delivers the same voltage as its power source. | Power a USB-C tablet, IP security camera, VoIP desktop phone, WiFi access point, or other low voltage 802.3af device through a network data cable using this IEEE 802.3at compliant Power over Ethernet adapter / single port injector. | This PoE injector 52v integrated unit delivers 52 volts, 30 watts of active PoE power with auto detection for devices labeled 802.3at. Expand your network to areas with no power lines or outlets. | Plug and play. Our single port PoE adapter transmits 10/100/1000 Gigabit data, delivering lightning fast wired speeds with no loss of signal quality via one Data In port and one Data + Power Out port. | All of our PoE products are backed by a One Year replacement warranty and a 30 Day, no questions asked, return policy. Expert help is only a phone call away. Please call 512 479 0317 for assistance.

Instantly upgrade your current network switch to PoE. This PoE injector extends 48v Power over Ethernet up to 328 feet via ethernet cable. A passive PoE injector always delivers the same voltage as its power source. | Power PoE Splitters, IP security cameras, VoIP desktop phones, WiFi access points, or other low voltage 802.3af devices through a network data cable using this passive Power over Ethernet adapter / single port injector. | This PoE injector 48v integrated unit delivers 48 volts, 15 watts of reliable passive (Always On) PoE power for devices labeled 802.3af. Expand your network to areas with limited power lines and outlets. | Plug and play. Our single port PoE adapter transmits 10/100/1000 Gigabit data, delivering lightning fast wired speeds with no loss of signal quality via one Data In port and one Data + Power Out port. | All of our PoE products are backed by a One Year replacement warranty and a 30 Day, no questions asked, return policy. Expert help is only a phone call away. Please call 512 479 0317 for assistance.

Instantly add PoE to your network switch or router. This small, compact mountable PoE injector screws into the wall near an outlet or to the underside of desks, reducing clutter and offering versatility for your setup. | Power IP security cameras, VoIP desktop phones, WiFi access points, and other devices that accept passive 802.3af using a data network cable and this passive Power over Ethernet adapter / single port injector. | This midspan injector includes a UL certified 48 volt, 15 watt DC power supply to power devices labeled. Delivers power up to 328 ft from the injector site. Compatible PoE devices must have a wattage of 15w or less. | Plug and play. Our single port PoE adapter transmits 10/100/1000 Gigabit data, delivering lightning fast wired speeds with no loss of signal quality via one Data In port and one Data + Power Out port.

Instantly add PoE to your network switch or router. This small, compact mountable PoE injector screws into the wall near an outlet or to the underside of desks, reducing clutter and offering versatility for your setup. | Power IP security cameras, VoIP desktop phones, WiFi access points, and other devices that accept passive 802.3af using a data network cable and this passive Power over Ethernet adapter / single port injector. | This midspan injector includes a UL certified 48 volt, 15 watt DC power supply to power devices labeled ‘802.3af’. Delivers power up to 328 ft from the injector site. Compatible PoE devices must have a wattage of 15w or less. | Plug and play. Our single port PoE adapter transmits 10/100/1000 Gigabit data, delivering lightning fast wired speeds with no loss of signal quality via one Data In port and one Data + Power Out port. | All of our PoE products are backed by a One Year replacement warranty and a 30 Day, no questions asked, return policy. Expert help is only a phone call away. Please call 512 479 0317 for assistance.

Power Over Ethernet (5 volts 12 watts, power and data) to Apple Tablets versions 10.2 and mini, and iPhones for use as digital signage, Point of Sale, conference room schedulers, and more. For more options, see the “Find the Right Apple Converter” image to view our full line of products. | Wired data offers better security than WiFi. Extends power to Apple Tablets and iPhone compatible devices up to 328 feet away. Fast charge ethernet adapter with Fast Ethernet (100 Mbps) data rate. | Low profile right angle head is designed for easier wall mount installation, and fits most tablet enclosures. Compatible with Vidabox, Heckler, Smart-Things, Viveroo, ArmorActive, Compulock, and more. Discreetly fits into the wall or under desks to keep your space free from hanging cables and wires. | Compatible with Apple Tablets versions 10.2 & Mini, and iPhone. Please note, this device will not work with USB-C devices.*For Apple Tablet Pro 12.9”, please see our GAT-USBC-REV2 or AT-USBC-JB. **Requires a 48 volt PoE injector or 802.3af PoE switch - 48 volt power supply NOT included. | Backed by a generous 1-year warranty. Expert technical support from Austin, Texas available. Please call 512 479 0317.

Perfect for Raspberry Pi 4, Google Wifi, and more. Easily convert Power Over Ethernet from your existing PoE switch, with an input voltage range of 44v to 56v POE and an output voltage of 5 volts 2 amp for one device with a USB-C connector. | Extends 5 volts of power to devices up to 328 feet away. Standard USB-C plug fits any USB-C device and is compatible with your existing IEEE 802.3af PoE switch or injector (sold separately). 10/100 Mbps data rate. *Not compatible with USB Type C Power Delivery for Apple Tablets, SurfaceGo, Samsung Tab, etc. | Quick & easy installation. Simply connect POE to your AF-USBC; the LED light will come on if there’s power. Connect your AF-USBC to charge your device. | Please note: before purchasing, please make sure your device accepts 5 volts USB-C power and NOT Power Delivery (PD). This device separates power and data, so your device will need a data port with an RJ-45 connection. | Backed by a generous 1-year warranty. Expert technical support from Austin, Texas available. Please call 512 479 0317.

Power mounted iPads - Power only / no data. This PoE converter allows you to extend power up to 328 feet and place iPad* where you want | Power one 5-volt iPad up to 328 feet - Compatible with iPad and iPhone lightning connectors - *Non-MFi | 5 volt 10 Watt fast Charging capability | Compatible with any IEEE 802.3af PoE switch or injector (Required for use - sold separately) | Backed by our 1 year manufacturer warranty - For expert technical support from Austin, TX please call 512 479 0317

A low-cost solution for power delivery over the network cable (PoE) | Passive PoE will output the the same input voltage - Use for 12v, 24v, 48v or 56v applications | Injector/Splitter kit allows you to extend Power via PoE to non-PoE devices | The 2.1mm x 5.5mm DC connector fits most devices | For Expert Technical Support and distance calculations please call 512 479 0317

Mix and match PoE versions on one PoE injector. Caught between Ubiquiti Versions or other Legacy PoE devices? This step-up PoE splitter can be used to power 802.3af devices from a 12-30v injector or DC input. Ideal for solar conversions. | Input power on to the DC or the RJ45 dongles and you will instantly get 48v PoE on the output. This device works inline for simple, convenient application: Input 12-30v on the DC barrel. Or input 12-30v PoE on the Male RJ45. | Instantly modify your 24 volt Passive system to a regulated 48 volts. Mix 24v and 48v devices on one injector. Convert existing battery or 12 volt power sources to PoE for use with Power over Ethernet Cameras, Phones and WiFi Access Points. | A cost-effective 12v converter solution to mix and match PoE standards in your network. The inline feature allows for a simple plug and play installation with lightning fast 10/100/1000 Gigabit data capability, up to 328 ft. away from the power source. | All PoE Texas products are backed by a One Year replacement warranty and a 30 Day, no questions asked, return policy. Expert help is only a phone call away. Please call 512 479 0317 for assistance.