1.Compatible With: Nikon AF-S Nikkor 24-120mm f/4G ED VR | 2.The lens hood provides a cost-effective solution to the problems caused by sun glare rain and wind-blown debris and is also valuable in providing protection against knocks and damage | 3.In addition, since the end of the lens is extended, you also get the added benefit of some extra protection from accidental impact | 4.Lens hoods block side glare and augment the protection provided by filters to the lens surface and ring | 5.The design makes it firmly on the lens

☀☀Fluorescent Bounce Dome Diffuser for Canon Speedlite Canon 580ex II Yongnuo YN-565EX YN-568EX YN560 III YN-560EX Meike MK910 . | ☀☀The Flash Soft Light Diffuser will diffuse the light output of the flash, producing softer shadows and a soft, more natural glow rather than the harsher effect when using a direct flash. | ☀☀The diffuser also helps to provide even coverage across the entire frame which is especially useful for wide-angle shooting. | ☀☀Since each Bounce Dome is custom made for the flash, it slips on and off without the need for touch fastener tabs. | ☀☀Additionally, the diffuser can be used outdoors to lend warmth to skin tones in open shade or to match the light balance of a sunset or sunrise portrait.

❤The HB-29 Bayonet Lens Hood for the for NIKON AF-S VR 70-200mm f/2.8G IF-ED Lens is a plastic hood that should be used to protect your shots from flare. | ❤It features a "petal" design to accommodate wide angle shooting | ❤It is also useful to minimize damage to your lens during any incidental bumps | ❤Compatible With:NIKON AF-S VR 70-200mm f/2.8G IF-ED Lens | ❤This dedicated lens hood is designed to match the specific focal length of the lens it was designed for

The all-metal adapter is designed to fit the lens securely, yet can still be removed easily when not needed. | Designed to reach infinity focus while maintaining the correct registration distance required to support CRC lenses or lenses with floating elements. | Compatible with:Canon EF Lens ,Micro Four Thirds 4/3 Camera

❤The camera mount coupling adapter and lens mount coupling adapter can be used independently of the extension tubes or you can add in the tubes for extreme macro photography. | ❤Because no other optical components are added with this kit, the image preserves the original optical properties of the lens. | ❤This tube set includes a lens-coupling ring and a body-coupling ring; three extension tubes of various sizes are also included to build up to the desired magnification. | ❤Tubes may be combined to create a variety of reproduction ratios. Life size image can be achieved with this set up. | ❤Each ring brings you closer to the subject as you increase the distance between lens and camera.

normally ,the shipping time is about 8~15 working days to USA.Please note:If you receive a message indicates that you will receive item(s) longer than 8~15 working days.please don't worry,it is inaccurate. | When run into the busy season, Customs thorough investigation, worsening climate etc,the shipping might be delayed.But please don't worry,don't hesitate to contact with me,i will do my best to help you.

It maintains original optical while transform the lens into a macro lens. It is far more desired then the add-on close-up lenses, which will alter the optical quality. The extension tube will work with all Nikon cameras, digital or film. | This extension tube consists of 5 parts: 1. Camera Body Mount Adapter 2. Lens Mount Adapter 3. 9mm tube (Tube 1) 4. 16mm tube (Tube 2) 5. 30mm tube (Tube 3) | There are no electrical contacts in the extension tubes. Exposure has to be adjusted manually. | It moves the lens farther from the film or digital sensor. The farther away the lens is, the closer the focus, the greater the magnification. | Compatible Digital Cameras: All Nikon F Mount Camera (suchas:D4/D3/D600/D800E/D700/D300S/D300/D5200/D5100/D3200/D3100/D90/D7100/D7000..ect)