Cable length: Not stretched 35 cm; stretches to approximately max 130 cm | This cable allows you to connect miscellaneous remote controls to remote socket of compatible cameras | Compatibility with Panasonic DC-S1H, S1RM, S1R, S1M, S1, G95, G91, G91H, G91M, G90M, G90H, G90, FZ10002, G9, G9L, G9M, GH5, GH5L, GH5S, GH5M; DMC-G85, G81M, G81H, G81, G80M, G80, G70H, G70M, G70KA, G70K, G70W, GX8K, GX8M, GX8A, GX8H, GX8, GX7, GX1, GH4RH, GH4R, GH4, GH3, GH2, GH1, GF1, G10, G7H, G7K, G7M, G7, G6H, G6K, G6M, G6, G5, G3, G2, G1; DMC-FZ2500, FZ2000, FZ1000, FZ330, FZ300, FZ200, FZ150, FZ100, FZ50S, FZ50K, FZ50, FZ30K, FZ30, FZ20S, FZ20K, FZ20; DMC-LC-1, L10, L1 | Compatibility with Leica DigiLux 2, DigiLux 3, V-Lux 4. Replaces Panasonic DMW-RSL1 cable and DMW-RS2GK cable

Cable length: Not stretched 35 cm; stretches to approximately max 130 cm | This cable allows you to connect miscellaneous remote controls to remote socket of compatible cameras | Compatibility with Sony ILCA-77M2, 99M2, 99V; SLT-A33, A35, A37, A55, A57, A65, A67, A77, A99; DSLR-A100, A200, A300, A350, A400, A450, A500, A550, A560, A580, A700, A850, A900; Konica Minolta DIMAGE A2, A1, 9, 7Hi, 7i, 7, 5, 4, 3, DYNAX 7D, 5D

Replaces Canon RS-80N3. Compatibility with Canon EOS 6D Mark II, 1D X Mark III, 1D X Mark II, 1D X, 1D C, 1DS Mark III, 1DS Mark II, 1Ds, 1D Mark IV, 1D Mark III, 1D Mark II N, 1D Mark II, 1D, 5D Mark II, 5D Mark III, 5D Mark IV, 5DS, 5DS R, 5D, 6D, 7D, 7D Mark II, 50D, 40D, 30D, 20D, D2000, D60, D30, EOS-1V, EOS-3 | Two stage control button behaves in the same way as your camera's shutter release, activating AF on a half press. The switch also features a lock allowing you to lock the shutter button down for long exposure times (BULB) or unattended continuous shooting | Take pictures without touching your camera, ideal for when you want to avoid causing vibrations. Helpful not only to suppress camera shake when shooting night views and fireworks, but also for self shooting

It sports an electric sound speaker, shutter release active lamp, interval timer, long exposure (it can use interval timer and long exposure simultaneously), self timer, TIME exposure and a release hold mechanism. Take photos without touching your camera and take pictures at regular intervals for time-lapse projects | Timer functions can be set to 99 hours 59 minutes and 59 seconds in one second increments. Number of shots can be set from 1 to 399; Double dash ( - - ) unlimited. LCD display with backlight and status LED with alarm. A locking two stages shutter button (BULB) | Replaces Canon TC-80N3. Compatibility with Canon EOS 6D Mark II, 1D X Mark III, 1D X Mark II, 1D X, 1D C, 1DS Mark III, 1DS Mark II, 1Ds, 1D Mark IV, 1D Mark III, 1D Mark II N, 1D Mark II, 1D, 5D Mark II, 5D Mark III, 5D Mark IV, 5DS, 5DS R, 5D, 6D, 7D, 7D Mark II, 50D, 40D, 30D, 20D, D2000, D60, D30, EOS-1V, EOS-3

Compatibility with Olympus OM-D E-M1, E-M5 Mark II, E-M5, E-M10 Mark II, E-M10; PEN PEN-F, E-PL8, E-PL7, E-PL6, E-PL5, E-PL3, E-PL2, E-P5, E-P3, EP-1, EP-2, E-PM2, E-PM1, E30, E100, E400, E410, E420, E450, E510, E520, E550, E600, E620, SP-510UZ, SP-550UZ, SP-560UZ, SP-565UZ, SP-570UZ, SP-590UZ, SP-810UZ, XZ-1, XZ-2, Stylus 1, Stylus 1s, SP-100EE, SH-60, SH-50, SH-1, SH-2, SZ-31MR, SZ-30MR, SZ-20, SZ-14, SZ-11, SZ-10, SH-21, SH-25 | Two stage control button behaves in the same way as your camera's shutter release, activating AF on a half press. The switch also features a lock allowing you to lock the shutter button down for long exposure times (BULB) or unattended continuous shooting | Take pictures without touching your camera, ideal for when you want to avoid causing vibrations. Helpful not only to suppress camera shake when shooting night views and fireworks, but also for self shooting | NOTE: NOT FIT Olympus OM-D E-M1X, E-M1 Mark II, E‑M1 Mark III，E-M5 Mark III, E-M10 Mark III

It sports an electric sound speaker, shutter release active lamp, interval timer, long exposure (it can use interval timer and long exposure simultaneously), self timer, TIME exposure and a release hold mechanism. Take photos without touching your camera and take pictures at regular intervals for time-lapse projects | Timer functions can be set to 99 hours 59 minutes and 59 seconds in one second increments. Number of shots can be set from 1 to 399; Double dash ( - - ) unlimited. LCD display with backlight and status LED with alarm. A locking two stages shutter button (BULB) | Compatibility with Olympus OM-D E-M1, E-M5 Mark II, E-M5, E-M10 Mark II, E-M10; PEN PEN-F, E-PL8, E-PL7, E-PL6, E-PL5, E-PL3, E-PL2, E-P5, E-P3, EP-1, EP-2, E-PM2, E-PM1, E30, E100, E400, E410, E420, E450, E510, E520, E550, E600, E620, SP-510UZ, SP-550UZ, SP-560UZ, SP-565UZ, SP-570UZ, SP-590UZ, SP-810UZ, XZ-1, XZ-2, Stylus 1, Stylus 1s, SP-100EE, SH-60, SH-50, SH-1, SH-2, SZ-31MR, SZ-30MR, SZ-20, SZ-14, SZ-11, SZ-10, SH-21, SH-25 | NOTE: NOT FIT Olympus OM-D E-M1X, E-M1 Mark II, E‑M1 Mark III, E-M5 Mark III, E-M10 Mark III

✔ Compatible with olympus/panasonic TTL and maintains full TTL connection, 6.5' (2 m) coiled cord | ✔ Mounts to flash shoe , mounts to 1/4"-20 threaded studs, the cord comes with a cold shoe locking ring and light stand lug for use with other lighting accessories | ✔ Reduce harsh shadows, the flash cord is ideal for use in a secure, studio environment or on-location shoots | ✔ Best photo uses: portraiture, studio, wedding photography, on location shoots, and more | ✔ NOTE: NOT FIT Olympus FL-LM3

It sports an electric sound speaker, shutter release active lamp, interval timer, long exposure (it can use interval timer and long exposure simultaneously), self timer, TIME exposure and a release hold mechanism. Take photos without touching your camera and take pictures at regular intervals for time-lapse projects | Timer functions can be set to 99 hours 59 minutes and 59 seconds in one second increments. Number of shots can be set from 1 to 399 and ' - - ' unlimited. LCD display with backlight and status LED with alarm. A locking two stages shutter button (BULB) | Replaces Fujifilm RR-90. Compatible with Fujifilm GFX50S, X-Pro2, X-H1, X-T2, X-T1, X-T10, X-T20, X-T100, X-E2S, X-E2, X-E3, X-M1, X-A20, X-A5, X-A3, X-A2, X-A1, X-A10, X100F, X100T, X70, X30, XQ2, XQ1, XF10, FinePix S1. (NOTE: NOT FIT Fujifilm GFX 100, GFX50R, X-Pro3, X-T3, X-T4, X-T30, X-T200, X-A7, X-E1, X100V)

Compatibility with Sony ILCA-77M2, 99M2, 99V; SLT-A33, A35, A37, A55, A57, A65, A67, A77, A99; DSLR-A100, A200, A300, A350, A400, A450, A500, A550, A560, A580, A700, A850, A900; Konica Minolta DIMAGE A2, A1, 9, 7Hi, 7i, 7, 5, 4, 3, DYNAX 7D, 5D | Two stage control button behaves in the same way as your camera's shutter release, activating AF on a half press. The switch also features a lock allowing you to lock the shutter button down for long exposure times (BULB) or unattended continuous shooting | Take pictures without touching your camera, ideal for when you want to avoid causing vibrations. Helpful not only to suppress camera shake when shooting night views and fireworks, but also for self shooting

Replaces Fujifilm RR-90. Compatible with Fujifilm GFX50S, X-Pro2, X-H1, X-T2, X-T1, X-T10, X-T20, X-T100, X-E2S, X-E2, X-E3, X-M1, X-A20, X-A5, X-A3, X-A2, X-A1, X-A10, X100F, X100T, X70, X30, XQ2, XQ1, XF10, FinePix S1. ( NOTE: NOT FIT Fujifilm GFX 100, GFX50R, X-Pro3, X-T3, X-T4, X-T30, X-T200, X-A7, X-E1, X100V ) | Two stage control button behaves in the same way as your camera's shutter release, activating AF on a half press. The switch also features a lock allowing you to lock the shutter button down for long exposure times (BULB) or unattended continuous shooting | Take pictures without touching your camera, ideal for when you want to avoid causing vibrations. Helpful not only to suppress camera shake when shooting night views and fireworks, but also for self shooting

Compatibility with Sony ILCE-9, 9M2, 7, 7M2, 7M3, 7M3K, 7R, 7RM2, 7RM3, 7RM4, 7S, 7SM2, 6600, 6600M, 6100, 6100L, 6100Y, 6400, 6400L, 6400M, 6500, 6500G, 6500M, 6500Z, 6300, 6000, 6000L, 6000Y, 6000Z, 5000, 5100, 5100L, 5100Y, 3000, QX1; DSC-HX300, HX350, HX400, HX400V, HX50, HX50V, HX60, HX60V, HX99, HX95, HX90, HX90V, HX80, QX30, RX0, RXOM2, RX100M2, RX100M3, RX100M4, RX100M5, RX100M5A, RX100M6, RX100M7, RX10, RX10M2, RX10M3, RX10M4, RX1RM2, WX500, WX700; SLT-A58, A68；NEX-3N | Compatibility with Sony ILCA-77M2, 99M2, 99V; SLT-A33, A35, A37, A55, A57, A65, A67, A77, A99; DSLR-A100, A200, A300, A350, A400, A450, A500, A550, A560, A580, A700, A850, A900; Konica Minolta DIMAGE A2, A1, 9, 7Hi, 7i, 7, 5, 4, 3, DYNAX 7D, 5D | 4 Shutter release modes: Support autofocus. Single shooting, continuous shooting (and high speed continuous shooting), BULB shooting and delay release of 3s shooting | Wireless and wired operations: Easy to control for photo shooting by using transmitter wirelessly, receiver can also be used as a wired shutter remote | Reduce camera shake and allows you to trigger your camera wirelessly up to 80 metres. Replace RM-L1AM and RM-SPR1.

Only compatible with Nikon Z50, COOLPIX B600, A1000, P1000, P950. Operating range is up to 10m / 32.8 ft | This bluetooth remote control can be used to control key camera functions when shooting remotely. Separate buttons for shutter release and video recording | You can also use the control to zoom and operate the camera menu. Multi selector on remote allows you to adjust camera setting remotely. It gets the same functions with multi selector on the camera. Can be used for manual focus adjustment, delay setting on camera and adjust the exposure compensation (it varies between different cameras) | No need to disrupt your shooting while super telephoto shooting or when using the camera on a tripod or in a remote location. This wireless shutter release is very compact and can be carried in your pocket for your work. Ideal for selfie, group shot, long exposures, macro photography and so on

4 Shutter release modes: Support autofocus. Single shooting, continuous shooting (and high speed continuous shooting), BULB shooting and delay release of 3s shooting | Wireless and wired operations: Easy to control for photo shooting by using transmitter wirelessly, receiver can also be used as a wired shutter remote | Reduce camera shake and allows you to trigger your camera wirelessly up to 80 metres | Replaces Fujifilm RR-90. Compatibility wtih Fujifilm GFX50S, X-Pro2, X-H1, X-T2, X-T1, X-T10, X-T20, X-T100, X-E2S, X-E2, X-E3, X-M1, X-A20, X-A5, X-A3, X-A2, X-A1, X-A10, X100F, X100T, X70, X30, XQ2, XQ1, XF10, FinePix S1 ( NOTE: NOT FIT Fujifilm GFX 100, GFX50R, X-Pro3, X-T3, X-T4, X-T30, X-T200, X-A7, X-E1, X100V )

Handy Little Gadget ►PHOLSY Bluetooth remote makes it exciting to take selfies, group and steady shots hands-free! Prevent shaking caused by holding cameras or phones. Eliminates awkward pose when take group picture. Post amazing photos and videos on Snapchat, Instagram, Facebook or YouTube with the help of this shutter remote | All-in-one Solution (remote 4 devices simultaneously) ►The camera shutter Remote control compatible with Canon, Nikon, Sony cameras (see below compatibility list) and work for all iPhone, iPad, iPod (iOS 6.0+), and most Android phones (4.2.2+) and tablets. Allows you to easily shoot from multiple angles at one time | Functional Design ►Auto focus / shutter release / start & stop video recording / zoom in and out control on cameras. The remote shutter can take pictures and start/stop videos on phones. Bluetooth Wireless Technology, 10m/32.8ft effective distance | More Amazing Features ► The controls feel nice physically and respond quickly.The buttons have a good tactile feel so it is clear when they're pressed.Smooth pairing guaranteed. You only need to pair it once and it will be automatically recognized on your next use. So easy and comfortable to use | Compact and Lightweight to Carry ►The remote is easy to store. You can bring it anywhere! It comes with an wrist strap that can be hung on the devices or wrist, convenient to use at any time and prevent loss

【A Surprise that brings the camera back to life】Bring your Camera back to life with a new battery, if it is barely holding a charge. Camera battery pack compatible with Nikon cameras Z5, Z6, Z6II, Z7, Z7II, D850, D780, D750, D610, D600, D500, D7500, D810, D810A, D800, D800E, D7000, D7100, D7200, Nikon 1 V1, Compatible with Nikon battery grip MB-N10, MB-N11, MB-D11, MB-D12, MB-D14, MB-D15, MB-D16, MB-D17, MB-D18 and wireless transmitter WT-7 | 【Easy to Power up】What sets these camera batteries MH-25, MH-25a charger apart from standard chargers, which have only one charging method, is that these EN-EL15c/EN-EL15b/EN-EL15a/EN-EL15 batteries have three power modes. You can charge anytime, anywhere at the USB port or USB-C/type-C port of the car navigation, the computer, and the power bank.You can enjoy100% similar to the original batterypackage | 【Intelligent LED Display Charger】EN-EL15 camera battery charger can charge 2 EN-EL15 batteries simultaneously from any USB power source and indicate the charging process, state of charge/remaining capacity on the LED display, preventing battery from overcharging. During the charging process, the cut-off current value and cut-off voltage value of the battery and the charger work to protect the battery from overcurrent, overvoltage and overheating | 【High Quality】Complete with an EN-EL15c/EN-EL15b/EN-EL15a/EN-EL15 Battery with 2100mAh (100% accurate capacity）storage capacity, a voltage of 7.0, and a new fully decoded chip that works just like the original.【What includes】 2 *EN-EL15c/EN-EL15b/EN-EL15a/ EN-EL15 Batteries; 1 * EN-EL15c/ EN-EL15b/EN-EL15a/EN-EL15 Dual Bay Battery Charger; 1 * Micro USB Cable | 【100% PHOTO OPPORTUNITIES】2 Packs EN-EL15c/EN-EL15b/EN-EL15a/EN-EL15 Replacement Batteries, a USB dual charger and a 59cm Micro USB cable; never miss every once-in-a-lifetime moment thanks to the extra power provided. With the 2-Pack ofEN-EL15c/EN-EL15b/EN-EL15a/EN-EL15 Batteries designed compatible with Nikon digital cameras,a dual LED charger and a Micro USB Cable, you have a complete backup solution

Compatible with Nikon Z fc, Z50, Z30, COOLPIX B600, A1000, P1000, P950, Z6 II, Z7 II. (NOTE: Z6 II and Z7 II, it is supported by updating the camera system firmware version 1.40) | This ML-L7 remote can take photos and shoot videos. Start the video capture by press the red dot on the remote control, and press again to stop the video capture. This Camera remote control operating range is up to 10m / 32.8 ft. It requires no line of sight to the camera, you can use the remote to control the camera in any direction | Remote unit allows photographers to control various camera functions on the camera as well as trigger the shutter from the remote. Shutter release, delayed shooting (Depending on the camera), focus adjustment (Long press " - " or long press " + " ), exposure compensation, multi selector (Functions similarly to the multi selector on the camera. Can be used for manual focus adjustment or item seletion) and Fn1 / Fn2 etc | No need to disrupt your shooting while super telephoto shooting or when using the camera on a tripod or in a remote location. This wireless shutter release is very compact and can be carried in your pocket for your work. Please Note: Once the camera get into the standby mode or go beyond operation range, the remote will disconnect automatically. To make them connected, you need to restart the remote and wake up the camera | Mini size, small and easy to carry. Parcel includes: ML-L7 Remote x 1, CR2025 Battery x 1, Strap x 1.

【A Surprise that brings the camera back to life】Bring your Camera back to life with a new battery, if it is barely holding a charge. Camera battery pack compatible with Nikon cameras COOLPIX P7800, COOLPIX P7700, COOLPIX P7100, COOLPIX P7000, D5600, D5500, D5300, D5200, D5100, D3500, D3400, D3300, D3200, D3100, Df | 【Easy to Power up】EN-EL14/EN-EL14a Li-ion Rechargeable Battery Compatible with Nikon Digital Cameras. Common micro-USB and USB-C/type-C input, you can charge anytime, anywhere at the USB port or USB-C/type-C port of the car navigation, the computer, or the power bank gives you more options than a standard battery charger. And Charges 1, or 2 EN-EL14 batteries simultaneously. You can enjoy100% similar to the original batterypackage | 【Intelligent LED Display Charger】EN-EL14/EN-EL14a camera battery charger can charge 2 EN-EL14/EN-EL14a batteries simultaneously from any USB power source and indicate the charging process, state of charge/remaining capacity on the LED display, preventing battery from overcharging. During the charging process, the cut-off current value and cut-off voltage value of the battery and the charger work to protect the battery from overcurrent, overvoltage and overheating | 【High Quality】Complete with an EN-EL14/EN-EL14a Battery with 1100mAh (100% accurate capacity）storage capacity, a voltage of 7.4, and a new fully decoded chip that works just like the original.【What includes】 2 *EN-EL14/EN-EL14a Batteries; 1 * EN-EL14/EN-EL14a Dual Bay Battery Charger; 1 * Micro USB Cable | 【100% PhOTO OPPORTUNITIES】2 Packs EN-EL14/EN-EL14a Replacement Batteries, a USB dual charger and a 59cm Micro USB cable; never miss every once-in-a-lifetime moment thanks to the extra power provided. With the 2-Pack of EN-EL14/EN-EL14a Batteries designed compatible with Nikon digital cameras,a dual LED charger and a Micro USB Cable, you have a complete backup solution

✔ Cable length: Not stretched 35 cm; stretches to approximately max 130 cm | ✔ This cable allows you to connect miscellaneous remote controls to remote socket of compatible cameras | ✔ Compatible with Nikon Df, Z7, Z7 II, Z6, Z6 II, Z5, D750, D780, D7500, D7200, D7100, D7000, D5600, D5500, D5300, D5200, D5100, D5000, D3300, D3200, D3100, D610, D600, D90, COOLPIX A, COOLPIX P1000, COOLPIX P7700, COOLPIX P7800, COOLPIX P950

✔ Cable length: Not stretched 35 cm; stretches to approximately max 130 cm | ✔ This cable allows you to connect miscellaneous remote controls to remote socket of compatible cameras | ✔ Compatible with Nikon Z9, D3, D4, D4s, D5, D6, D800, D850, D800E, D810, D810A, D700, D500, D300, D200, F6, F100, F5, F90X, F90, N90s, D1X, D2H, D3X; Fujifilm S5 Pro, S3 Pro; Kodak DCS-14n

✔ Cable length: Not stretched 35 cm; stretches to approximately max 130 cm | ✔ This cable allows you to connect miscellaneous remote controls to remote socket of compatible cameras | ✔ Compatible with Olympus OM-D E-M1, E-M5 Mark II, E-M5, E-M10 Mark II, E-M10; PEN PEN-F, E-PL8, E-PL7, E-PL6, E-PL5, E-PL3, E-PL2, E-P5, E-P3, EP-1, EP-2, E-PM2, E-PM1, E30, E100, E400, E410, E420, E450, E510, E520, E550, E600, E620, 510UZ, 550UZ, 560UZ, 565UZ, 570UZ, 590UZ, 810UZ, XZ-1, XZ-2, Stylus 1, 1s, SP-100EE, SH-60, SH-50, SH-1, SH-2, SZ-31MR, SZ-30MR, SZ-20, SZ-14, SZ-11, SZ-10, SH-21, SH-25 | ✔ NOTE: NOT FIT Olympus OM SYSTEM OM-1, OM SYSTEM OM-5, E-M1X, E-M1 Mark II, E‑M1 Mark III，E-M5 Mark III, E-M10 Mark III, E-M10 Mark IV.

【A Surprise that brings the camera back to life】Bring your Camera back to life with a new battery, if it is barely holding a charge. Camera battery pack compatible with Sony cameras ZV-E10, ILCE-a7SM2, a7S, a7RM2, a7R, a7M2, a7, a6500, a6400, a6300, a6100, a6000, a5100, a5000, a3500, a3000, QX1; NEX-7, NEX-6, NEX-5T, NEX-5R, NEX-5N, NEX-5, NEX-F3, NEX-C3, NEX-3; SLT-a55, a37, a35, a33; DSC-RX10M4, RX10M3, RX10M2, RX10 | 【Easy to Power up】NP-FW50 Li-ion Rechargeable Battery Compatible with Sony Digital Cameras. Common micro-USB and USB-C/type-C input, you can charge anytime, anywhere at the USB port or USB-C/type-C port of the car navigation, the computer, or the power bank gives you more options than a standard battery charger. And Charges 1, or 2 NP-FW50 batteries simultaneously. You can enjoy100% similar to the original batterypackage | 【Intelligent LED Display Charger】 NP-FW50 camera battery charger can charge 2 NP-FW50 batteries simultaneously from any USB power source and indicate the charging process, state of charge/remaining capacity on the LED display, preventing battery from overcharging. During the charging process, the cut-off current value and cut-off voltage value of the battery and the charger work to protect the battery from overcurrent, overvoltage and overheating | 【High Quality】Complete with an NP-FW50 Battery with 1100mAh (100% accurate capacity）storage capacity, a voltage of 7.4, and a new fully decoded chip that works just like the original.【What includes】 2 * NP-FW50 Batteries; 1 * NP-FW50 Dual Bay Battery Charger; 1 * Micro USB Cable | 【100% PHOTO OPPORTUNITIES】2 Packs NP-FW50 Replacement Batteries, a USB dual charger and a 59cm Micro USB cable; never miss every once-in-a-lifetime moment thanks to the extra power provided. With the 2-Pack of NP-FW50 Batteries designed compatible with Sony digital cameras,a dual LED charger and a Micro USB Cable, you have a complete backup solution

✔ Maintains full E-TTL, E-TTL II and manual control, 6.5' (2 m) coiled cord | ✔ Mounts to flash shoe , mounts to 1/4"-20 threaded studs, the cord comes with a cold shoe locking ring and light stand lug for use with other lighting accessories | ✔ Reduce harsh shadows, the flash cord is ideal for use in a secure, studio environment or on-location shoots | ✔ Best photo uses: portraiture, studio, wedding photography, on location shoots, and more | ✔ Features a limited 1-year warranty

【One adapter, so many options】ADAPTALL-2 mount lens to Fujifilm X-mount camera body, explore new lens combinations, compatible for Tamron ADAPTALL-2 mount lens to compatible with Fujifilm X-H2S, X-H2, X-H1, X-Pro3, X-Pro2, X-Pro1, X-T5, X-T4, X-T3, X-T2, X-T1, X-S20, X-S10, X-T30 II, X-T30, X-T20, X-T10, X-T200, X-T100, X-E4, X-E3, X-E2S, X-E2, X-E1, X-M1, X-A7, X-A5, X-A3, X-A2, X-A1, X-A20, X-A10 etc. | 【No loss of image quality or speed】Infinity focus allowed. There is no electronic contacts or glass inside of this lens adapter, so have to manually adjust all settings (no autofocus) and no need to worry about optic degradation of your lenses. Connected lenses retain all of their superb image quality with no loss of brightness, contrast or speed | 【New exterior design, solid & durable】Aesthetics and streamlined exterior design means comfortable shooting in any direction, including vertically. The adapter, with Difficult-To-Machining tooth design, matched the nice look of your cameras and lenses. Built from aviation grade aluminum and magnesium alloy, the MOUNT ADAPTER is strong and lightweight with a durable finish, really very resistant and performing for vintage lenses | 【Precisely matched】The lens mount adapter compatible with Fujifilm FX mount camera is well constructed and makes a tight fitting connection to the lens and camera body, to preserve the performance of pro-level cameras and lenses. And it makes a precise fit with the camera and lens, crucial for meticulous performance. Attaches and detaches to the camera body smoothly and cleanly. No light leakage. Keep using the lenses you love with the most innovative camera bodies available | 【Clever design】Easy to mount and dismount. Travel lighter, use one set of lenses with two camera bodies. Best of new and old, use vintage lenses with your digital camera.【Note】You must set in the camera menu to "shoot with no lens attached"

【One adapter, so many options】AF mount lens to Fujifilm X-mount camera body, explore new lens combinations, compatible for Sony A / Minolta AF mount lens to compatible with Fujifilm X-H2S, X-H2, X-H1, X-Pro3, X-Pro2, X-Pro1, X-T5, X-T4, X-T3, X-T2, X-T1, X-S20, X-S10, X-T30 II, X-T30, X-T20, X-T10, X-T200, X-T100, X-E4, X-E3, X-E2S, X-E2, X-E1, X-M1, X-A7, X-A5, X-A3, X-A2, X-A1, X-A20, X-A10 etc. Note: must set in the camera menu to "shoot with no lens attached" | 【Unique design】There is a aperture control ring on this Lens Mount Adapter, which you can adjust the aperture manually on this adapter for your A / AF Mount lens. The aperture control ring uses the progressive damping design that gives you the comfortable handling like the original lens' aperture control ring | 【No loss of image quality or speed】Infinity focus allowed. There is no electronic contacts or glass inside of this lens adapter, so have to manually adjust all settings (no autofocus) and no need to worry about optic degradation of your lenses. Connected lenses retain all of their superb image quality with no loss of brightness, contrast or speed | 【New exterior design, solid & durable】Aesthetics and streamlined exterior design means comfortable shooting in any direction, including vertically. The adapter, with Difficult-To-Machining tooth design, matched the nice look of your cameras and lenses. Built from aviation grade aluminum and magnesium alloy, the MOUNT ADAPTER is strong and lightweight with a durable finish, really very resistant and performing for vintage lenses | 【Precisely matched】The lens mount adapter compatible with Fujifilm FX mount camera is well constructed and makes a tight fitting connection to the lens and camera body, to preserve the performance of pro-level cameras and lenses. And it makes a precise fit with the camera and lens, crucial for meticulous performance. Attaches and detaches to the camera body smoothly and cleanly. No light leakage. Keep using the lenses you love with the most innovative camera bodies available

【Compatible】Compatible with Sony A Minolta AF mount lens to M4/3 cameras compatible with Olympus OM SYSTEM OM-1, OM-5, EM1X, EM1 iii, EM1 ii, EM1, EM5 iii, EM5, EM5 ii, EM10, EM10 ii, EM10 iii, EM10 iv, PENf, EP7, EP5, EP3, EPL10, EPL9, EPL8, EPL7, EPL6, EPL5, EPM2, EPL3, EPM1, EP2, EPL2, EPL1, EP1; Lumix GH6, GH5, GH4, GH3, GH2, GH1, G95, G90, G85, G80, G100, G9, G7, G1, G2, G3, G5, G6, GF1, GF2, GF3, GF5, GF6, GF7, GX85, GX80, GX9, GX8, GX7, BGH1, GF1, GF2, GF3, GF5, GF6, GF7, GF10 etc. | 【Unique design】There is a aperture control ring on this Lens Mount Adapter, which you can adjust the aperture manually on this adapter for your A / AF Mount lens. The aperture control ring uses the progressive damping design that gives you the comfortable handling like the original lens' aperture control ring.【Note】You must set in the camera menu to "shoot with no lens attached" | 【No loss of image quality or speed】Infinity focus allowed. There is no electronic contacts or glass inside of this lens adapter, so have to manually adjust all settings (no autofocus) and no need to worry about optic degradation of your lenses. Connected lenses retain all of their superb image quality with no loss of brightness, contrast or speed | 【New exterior design, solid & durable】Aesthetics and streamlined exterior design means comfortable shooting in any direction, including vertically. The adapter, with Difficult-To-Machining tooth design, matched the nice look of your cameras and lenses. Built from aviation grade aluminum and magnesium alloy, the MOUNT ADAPTER is strong and lightweight with a durable finish, really very resistant and performing for vintage lenses | 【Precisely matched】The lens mount adapter compatible with Micro Four Thirds (M4/3 MFT) mount cameras is well constructed and makes a tight fitting connection to the lens and camera body, to preserve the performance of pro-level cameras and lenses. And it makes a precise fit with the camera and lens, crucial for meticulous performance. Attaches and detaches to the camera body smoothly and cleanly. No light leakage. Keep using the lenses you love with the most innovative camera bodies available

✔ Shooting still photos and movies. Focusing with AF | ✔ Pairing the remote controller with a compatible with Canon digital camera enables the following operations to be performed wirelessly (with an operating distance of approx. 10 m/32.8 ft. in any direction) | ✔ Zooming (when using the Power Zoom Adapter). Compatible with the PZ-E1 power zoom adapter for remotely adjusting zoom position and movement of the EF-S 18-135mm f/3.5-5.6 IS USM lens | ✔ Only compatible with Canon EOS R7, EOS R10, EOS 90D, EOS R3, EOS R, EOS RP, EOS R5, EOS R5 C, EOS R6, 200D, 200D II, 250D, 6D Mark II, 77D, 800D, 850D, EOS M6 Mark II, M50, M50 Mark II, M200, PowerShot G5X Mark II, G7X Mark III, SX70 HS, Rebel SL2, Rebel SL3, Rebel T7i, Rebel T8i | ✔ Please NOTE: Make sure your camera drive mode to remote mode

✔ Compatible with Canon EOS R7, EOS R10, EOS R6, EOS R, EOS RA, EOS RP, 850D, 90D, 80D, 70D, 77D, 60D, 60Da, 250D, 200D, 200DII, 100D, 800D, 760D, 750D, 700D, 650D, 600D, 550D, 500D, 450D, 400D, 1500D, 1300D, 1200D, 1100D, 1000D, 2000D, M5, M6, M6 Mark II; PowerShot SX50HS, SX60HS, SX70HS, G1X Mark III, G1X Mark II, G1X, G3X, G5X, G10, G11, G12, G15, G16; Rebel: XT, XTi, XS, XSi, T1i, T2, T2i, T3, T3i, T4, T4i, T5, T5i, T6, T6i, T7i, T8i, SL1 etc. | ✔ Compatible with Fujifilm GFX100, GFX100S, GFX50R, GFX50SII, GFX100 IR, X-Pro3, X-T3, X-T4, X-T30, X-T30II, X-A7, X-E1, X100V; Olympus OM-D OM-1, E-M1X, E-M1 Mark II, E‑M1 Mark III, E-M5 Mark III ; Pentax 645Z, K-1 Mark II, K100D, K110D, K200D, K-500, K100D, K20D, K10D, K-30, K-50, K-7, K-5, K-5II, K-5IIs, K-3, K-3II, K-1; *ist D, *ist DL, *ist DS, *ist DS2; Samsung GX-1L, GX-1S, GX-10, GX-20, NX100, NX11, NX10, NX5; Contax 645, N1, NX, N Digial; Sigma Sd1 | ✔ It sports an electric sound speaker, shutter release active lamp, interval timer, long exposure (it can use interval timer and long exposure simultaneously), self timer, TIME exposure and a release hold mechanism. Take photos without touching your camera and take pictures at regular intervals for time-lapse projects | ✔ Timer functions can be set to 99 hours 59 minutes and 59 seconds in one second increments. Number of shots can be set from 1 to 399; Double dash ( - - ) unlimited. LCD display with backlight and status LED with alarm. A locking two stages shutter button (BULB) | ✔ Replaces RS-60E3, Fujifilm RR-100 and Olympus RM-CB2

✔ Compatible with Canon EOS R6, EOS R, EOS RA, EOS RP, 850D, 90D, 80D, 70D, 77D, 60D, 60Da, 250D, 200D, 200DII, 100D, 800D, 760D, 750D, 700D, 650D, 600D, 550D, 500D, 450D, 400D, 1500D, 1300D, 1200D, 1100D, 1000D, 2000D, M5, M6, M6 Mark II; PowerShot SX50HS, SX60HS, SX70HS, G1X Mark III, G1X Mark II, G1X, G3X, G5X, G10, G11, G12, G15, G16; Rebel: XT, XTi, XS, XSi, T1i, T2, T2i, T3, T3i, T4, T4i, T5, T5i, T6, T6i, T7i, T8i, SL1 etc. | ✔ Compatible with Canon EOS R3, EOS R5, EOS R5 C, 10D, 6D MarK II, 1D X Mark II, 1D X, 1DX Mark III, 1D C, 1DS Mark III, 1DS Mark II, 1Ds, 1D Mark IV, 1D Mark III, 1D Mark II N, 1D Mark II, 1D, 5D Mark II, 5D Mark III, 5D Mark IV, 5DS, 5DS R, 5D, 6D, 7D, 7D Mark II, 50D, 40D, 30D, 20D, D2000, D60, D30, EOS-1V, EOS-3 | ✔ Compatible with Fujifilm GFX100, GFX100S, GFX50R, GFX50SII, GFX100 IR, X-Pro3, X-T3, X-T4, X-T30, X-T30II, X-A7, X-E1, X100V; Compatible with Olympus OM-1, E-M1X, E-M1 Mark II, E‑M1 Mark III, E-M5 Mark III ; Compatible with Pentax 645Z, K-1 Mark II, K100D, K110D, K200D, K-500, K100D, K20D, K10D, K-30, K-50, K-7, K-5, K-5II, K-5IIs, K-3, K-3II, K-1; *ist D, *ist DL, *ist DS, *ist DS2; Samsung GX-1L, GX-1S, GX-10, GX-20, NX100, NX11, NX10, NX5; Contax 645, N1, NX, N Digial; Sigma Sd1 | ✔ Timing setting can be accurate to 0.1 seconds. 5 setting for timing control: Delay (Self timer), Interval (Interval timer) and Long (exposure timer), N (number of frames setting); BKLN (Auto bracketing timed exposure setting for HDR, shutter release with instant, continuous 3, 5 or 7 shots). 4 modes for shutter release control: S (single shooting), C (continuous shooting), B (Bulb), 2S (2 seconds delay) | ✔ Reduce camera shake and allows you to trigger your camera wirelessly up to 60 metres. You can change different shutter release cable to work with different cameras. Replaces TC-80N3 timer remote control RS-60E3 remote switch, Fuji RR-100, Olympus RM-CB2. Wireless and wired operations.

✔ Compatible with Nikon Df, Z7, Z7 II, Z6, Z6 II, Z5, D750, D780, D7500, D7200, D7100, D7000, D5600, D5500, D5300, D5200, D5100, D5000, D3300, D3200, D3100, D610, D600, D90, COOLPIX A, COOLPIX P1000, COOLPIX P7700, COOLPIX P7800, COOLPIX P950 | ✔ Compatible with Nikon Z9, D3, D4, D4s, D5, D6, D800, D850, D800E, D810, D810A, D700, D500, D300, D200, F6, F100, F5, F90X, F90, N90s, D1X, D2H, D3X; Fujifilm S5 Pro, S3 Pro; Kodak DCS-14n | ✔ Timing setting can be accurate to 0.1 seconds. 5 setting for timing control: Delay (Self timer), Interval (Interval timer) and Long (exposure timer), N (number of frames setting); BKLN (Auto bracketing timed exposure setting for HDR, shutter release with instant, continuous 3, 5 or 7 shots). 4 modes for shutter release control: S (single shooting), C (continuous shooting), B (Bulb), 2S (2 seconds delay) | ✔ Reduce camera shake and allows you to trigger your camera wirelessly up to 60 metres. You can change different shutter release cable to work with different cameras. Replaces nikon MC-36A remote connecting cord and nikon remote cord MC-DC2. Wireless and wired operations | ✔ With LCD display, very convenient to get accurate shooting modes setting information, easy to operate on a sunny day or in the dark.

【One adapter, so many options】CY mount lens to Fujifilm X-mount camera body, explore new lens combinations, compatible for Contax / Yashica CY mount lens to compatible with Fujifilm X-H2S, X-H2, X-H1, X-Pro3, X-Pro2, X-Pro1, X-T5, X-T4, X-T3, X-T2, X-T1, X-S20, X-S10, X-T30 II, X-T30, X-T20, X-T10, X-T200, X-T100, X-E4, X-E3, X-E2S, X-E2, X-E1, X-M1, X-A7, X-A5, X-A3, X-A2, X-A1, X-A20, X-A10 etc. | 【No loss of image quality or speed】Infinity focus allowed. There is no electronic contacts or glass inside of this lens adapter, so have to manually adjust all settings (no autofocus) and no need to worry about optic degradation of your lenses. Connected lenses retain all of their superb image quality with no loss of brightness, contrast or speed | 【New exterior design, solid & durable】Aesthetics and streamlined exterior design means comfortable shooting in any direction, including vertically. The adapter, with Difficult-To-Machining tooth design, matched the nice look of your cameras and lenses. Built from aviation grade aluminum and magnesium alloy, the MOUNT ADAPTER is strong and lightweight with a durable finish, really very resistant and performing for vintage lenses | 【Precisely matched】The lens mount adapter compatible with Fujifilm FX mount camera is well constructed and makes a tight fitting connection to the lens and camera body, to preserve the performance of pro-level cameras and lenses. And it makes a precise fit with the camera and lens, crucial for meticulous performance. Attaches and detaches to the camera body smoothly and cleanly. No light leakage. Keep using the lenses you love with the most innovative camera bodies available | 【Clever design】Easy to mount and dismount. Travel lighter, use one set of lenses with two camera bodies. Best of new and old, use vintage lenses with your digital camera.【Note】You must set in the camera menu to "shoot with no lens attached"

【One adapter, so many options】EF mount lens to Fujifilm X-mount camera body, explore new lens combinations, compatible for Canon EF EF-S mount lens to compatible with Fujifilm X-H2S, X-H2, X-H1, X-Pro3, X-Pro2, X-Pro1, X-T5, X-T4, X-T3, X-T2, X-T1, X-S20, X-S10, X-T30 II, X-T30, X-T20, X-T10, X-T200, X-T100, X-E4, X-E3, X-E2S, X-E2, X-E1, X-M1, X-A7, X-A5, X-A3, X-A2, X-A1, X-A20, X-A10 etc. | 【No loss of image quality or speed】Infinity focus allowed. There is no electronic contacts or glass inside of this lens adapter, so have to manually adjust all settings (no autofocus) and no need to worry about optic degradation of your lenses. Connected lenses retain all of their superb image quality with no loss of brightness, contrast or speed | 【New exterior design, solid & durable】Aesthetics and streamlined exterior design means comfortable shooting in any direction, including vertically. The adapter, with Difficult-To-Machining tooth design, matched the nice look of your cameras and lenses. Built from aviation grade aluminum and magnesium alloy, the MOUNT ADAPTER is strong and lightweight with a durable finish, really very resistant and performing for vintage lenses | 【Precisely matched】The lens mount adapter compatible with Fujifilm FX mount camera is well constructed and makes a tight fitting connection to the lens and camera body, to preserve the performance of pro-level cameras and lenses. And it makes a precise fit with the camera and lens, crucial for meticulous performance. Attaches and detaches to the camera body smoothly and cleanly. No light leakage. Keep using the lenses you love with the most innovative camera bodies available | 【Clever design】Easy to mount and dismount. Travel lighter, use one set of lenses with two camera bodies. Best of new and old, use vintage lenses with your digital camera.【Note】You must set in the camera menu to "shoot with no lens attached"

【One adapter, so many options】Compatible with Exakta (Not compatible with Topcon) mount lens to Fujifilm X-mount camera body, explore new lens combinations, compatible for Exakta (Not Topcon) mount lens to compatible with Fujifilm X-H2S, X-H2, X-H1, X-Pro3, X-Pro2, X-Pro1, X-T5, X-T4, X-T3, X-T2, X-T1, X-S20, X-S10, X-T30 II, X-T30, X-T20, X-T10, X-T200, X-T100, X-E4, X-E3, X-E2S, X-E2, X-E1, X-M1, X-A7, X-A5, X-A3, X-A2, X-A1, X-A20, X-A10 etc. | 【No loss of image quality or speed】Infinity focus allowed. There is no electronic contacts or glass inside of this lens adapter, so have to manually adjust all settings (no autofocus) and no need to worry about optic degradation of your lenses. Connected lenses retain all of their superb image quality with no loss of brightness, contrast or speed | 【New exterior design, solid & durable】Aesthetics and streamlined exterior design means comfortable shooting in any direction, including vertically. The adapter, with Difficult-To-Machining tooth design, matched the nice look of your cameras and lenses. Built from aviation grade aluminum and magnesium alloy, the MOUNT ADAPTER is strong and lightweight with a durable finish, really very resistant and performing for vintage lenses | 【Precisely matched】The lens mount adapter compatible with Fujifilm FX mount camera is well constructed and makes a tight fitting connection to the lens and camera body, to preserve the performance of pro-level cameras and lenses. And it makes a precise fit with the camera and lens, crucial for meticulous performance. Attaches and detaches to the camera body smoothly and cleanly. No light leakage. Keep using the lenses you love with the most innovative camera bodies available | 【Clever design】Easy to mount and dismount. Travel lighter, use one set of lenses with two camera bodies. Best of new and old, use vintage lenses with your digital camera.【Note】You must set in the camera menu to "shoot with no lens attached"

【One adapter, so many options】FD mount lens to Fujifilm X-mount camera body, explore new lens combinations, compatible for Canon FD FL mount lens to compatible with Fujifilm X-H2S, X-H2, X-H1, X-Pro3, X-Pro2, X-Pro1, X-T5, X-T4, X-T3, X-T2, X-T1, X-S20, X-S10, X-T30 II, X-T30, X-T20, X-T10, X-T200, X-T100, X-E4, X-E3, X-E2S, X-E2, X-E1, X-M1, X-A7, X-A5, X-A3, X-A2, X-A1, X-A20, X-A10 etc. Note: must set in the camera menu to "shoot with no lens attached" | 【Unique design】There is an aperture lever on this Lens Mount Adapter, which help retain the function of the aperture lever for your FD mount lens. Important: Before attach the lens adapter, please rotate the aperture lever ring on the adapter clockwise until it is full OPENed. Please refer to the illustration on below description page | 【No loss of image quality or speed】Infinity focus allowed. There is no electronic contacts or glass inside of this lens adapter, so have to manually adjust all settings (no autofocus) and no need to worry about optic degradation of your lenses. Connected lenses retain all of their superb image quality with no loss of brightness, contrast or speed | 【New exterior design, solid & durable】Aesthetics and streamlined exterior design means comfortable shooting in any direction, including vertically. The adapter, with Difficult-To-Machining tooth design, matched the nice look of your cameras and lenses. Built from aviation grade aluminum and magnesium alloy, the MOUNT ADAPTER is strong and lightweight with a durable finish, really very resistant and performing for vintage lenses | 【Precisely matched】The lens mount adapter compatible with Fujifilm FX mount camera is well constructed and makes a tight fitting connection to the lens and camera body, to preserve the performance of pro-level cameras and lenses. And it makes a precise fit with the camera and lens, crucial for meticulous performance. Attaches and detaches to the camera body smoothly and cleanly. No light leakage. Keep using the lenses you love with the most innovative camera bodies available

Multifunctional: This replacement Canon remote shutter release support four shutter release modes: continuous shooting mode, long exposure / Bulb mode, single shooting mode, and three seconds delay shooting mode, which are great for taking selfie, family pictures and steady shots hands-free. Replaces Canon RS-60N3, TC-80N3 | Reliable and Practical: The remote shutter for Canon use 2.4GHz technology with strong anti-interference, works stable up to 80m. Support autofocus and eliminate camera shake by releasing the shutter remotely. The controller is small enough to not be a problem hiding in most photos. Easy to setup, all you have to do is make sure plug it in to the remote outlet on the side of the camera (you do not have to attach the remote to the hot shoe) and control the camera remotely at any direction | The wireless remote shutter C8 compatible with Canon EOS R3, EOS R5, EOS R5 C, 10D, 6D MarK II, 1D X Mark II, 1D X, 1DX Mark III, 1D C, 1DS Mark III, 1DS Mark II, 1Ds, 1D Mark IV, 1D Mark III, 1D Mark II N, 1D Mark II, 1D, 5D Mark II, 5D Mark III, 5D Mark IV, 5DS, 5DS R, 5D, 6D, 7D, 7D Mark II, 50D, 40D, 30D, 20D, D2000, D60, D30, EOS-1V, EOS-3 | Elegant Appearance and Design: The shape of the remote shutter release is like a pebble, nice shape, very slick & great feel, and there will be no rubbing feel just as holding with square frame one. This wireless pebble shutter remote control has smooth lines matched with the mainstream classic black color, which is very delicate, portable, lightweight and textured | Battery: No more hunting for odd batteries. The receiver needs to install 2 AAA batteries (not included in the package), and the transmitter needs to install a CR2032 battery (included in the package), which are much more convenient than lithium batteries. Don't forget to turn the receiver off and take batteries out after using it to prevent battery on the unite running out in a few days.

Multifunctional: This replacement Nikon remote shutter release support four shutter release modes: continuous shooting mode, long exposure / Bulb mode, single shooting mode, and three seconds delay shooting mode, which are great for taking selfie, family pictures and steady shots hands-free. Replaces Nikon MC-30 and MC-36A | Reliable and Practical: The remote shutter for Nikon use 2.4GHz technology with strong anti-interference, works stable up to 80m. Support autofocus and eliminate camera shake by releasing the shutter remotely. The controller is small enough to not be a problem hiding in most photos. Easy to setup, all you have to do is make sure plug it in to the remote outlet on the side of the camera (you do not have to attach the remote to the hot shoe) and control the camera remotely at any direction | The wireless camera remote shutter N8 compatible with Nikon Z9, D3, D4, D4s, D5, D6, D800, D850, D800E, D810, D810A, D700, D500, D300, D200, F6, F100, F5, F90X, F90, N90s, D1X, D2H, D3X; for Fujifilm S5 Pro, S3 Pro; Kodak DCS-14n | Elegant Appearance and Design: The shape of the remote shutter release is like a pebble, nice shape, very slick & great feel, and there will be no rubbing feel just as holding with square frame one. This wireless pebble shutter remote control has smooth lines matched with the mainstream classic black color, which is very delicate, portable, lightweight and textured | Battery: No more hunting for odd batteries. The receiver needs to install 2 AAA batteries (not included in the package), and the transmitter needs to install a CR2032 battery (included in the package), which are much more convenient than lithium batteries. Don't forget to turn the receiver off and take batteries out after using it to prevent battery on the unite running out in a few days.

FEATURES OF INTERVALOMETER & SHUTTER MODES: PHOLSY camera remote control wireless shutter for Panasonic supports TIMER CONTROL and 5 SHUTTER MODES. 5 SHUTTER MODES: S (single shooting), C (continuous shooting), B (Bulb), 2S (2 seconds delay) and TIMER. The timer intervalometer remote is great for time-lapse recording of blooming flowers, astrophotography, and continuous shots for star trails etc. You will never get another blurry shot using this remote control | MORE FEATURES: Timing setting can be accurate to 0.1 second. 5 settings for TIMER CONTROL: Delay (Self timer), Interval (Interval timer), Long (exposure timer), N (number of frames setting) and BKLN (Auto bracketing timed exposure setting for HDR, shutter release with instant, continuous 3, 5 or 7 shots). 2.4GHz wireless transmission, the camera remote shutter with timer reduce camera shake and allow you to remotely control photos up to 60+ meters with ultra-powerful anti-interference ability | The wireless timer compatible with Panasonic DC-S5, S5C, S5M2, S5M2X, S1H, S1R, S1, G95, G91, G90, FZ10002, G9, GH5, GH5L, GH5S, GH5M, GH5M2, GH5M2L, GH5M2M, GH6; DMC-G85, G81, G80M, G80, G70H, G70M, G70KA, G70K, GX8K, GX8M, GX8A, GX8H, GX8, GX7, GX1, GH4RH, GH4R, GH4, GH3,GH2, GH1, GF1, G10, G7H, G7K, G7M, G7, G6H, G6K, G6M, G6, G5, G3, G2, G1; DMC-FZ2500, FZ2000, FZ1000, FZ330, FZ300, FZ200, FZ150, FZ100, FZ50S, FZ50K, FZ50, FZ30K, FZ30, FZ20S, FZ20K, FZ20; LC-1, L10, L1 | LCD DISPLAY: Easy to use, quick set up. The LCD display provides visual reference to your settings and offers an easier way to store the prior settings. So once it’s setup its pretty easy to simply change the number of seconds for a longer or shorter exposure time. It also illuminates for working in low-light situations even in dark, which is very convenient to get accurate shooting mode. Replaces Panasonic DMW-RSL1 and DMW-RS2GK | COST-EFFECTIVE: Only need to change different shutter release cable to work with different cameras. Wireless and wired operations without occupying camera’ s hot shoe. Use AAA batteries (2 in the transmitter and 2 in the receiver, not included in package).

Multifunctional: This replacement Sony remote shutter release support four shutter release modes: continuous shooting mode, long exposure / Bulb mode, single shooting mode, and three seconds delay shooting mode, which are great for taking selfie, family pictures and steady shots hands-free. Replaces Sony RM-L1AM | Reliable and Practical: The remote shutter for Sony use 2.4GHz technology with strong anti-interference, works stable up to 80m. Support autofocus and eliminate camera shake by releasing the shutter remotely. The controller is small enough to not be a problem hiding in most photos. Easy to setup, all you have to do is make sure plug it in to the remote outlet on the side of the camera (you do not have to attach the remote to the hot shoe) and control the camera remotely at any direction | The wireless camera remote shutter S6 compatible with Sony ILCA-a77M2, a99M2, a99V; SLT-a33, a35, a37, a55, a57, a65, a67, a77, a99; DSLR-a100, a200, a300, a350, a400, a450, a500, a550, a560, a580, a700, a850, a900; Konica Minolta DIMAGE A2, A1, 9, 7Hi, 7i, 7, 5, 4, 3, DYNAX 7D, 5D | Elegant Appearance and Design: The shape of the remote shutter release is like a pebble, nice shape, very slick & great feel, and there will be no rubbing feel just as holding with square frame one. This wireless pebble shutter remote control has smooth lines matched with the mainstream classic black color, which is very delicate, portable, lightweight and textured | Battery: No more hunting for odd batteries. The receiver needs to install 2 AAA batteries (not included in the package), and the transmitter needs to install a CR2032 battery (included in the package), which are much more convenient than lithium batteries. Don't forget to turn the receiver off and take batteries out after using it to prevent battery on the unite running out in a few days.

FEATURES OF INTERVALOMETER & SHUTTER MODES: PHOLSY camera remote control wireless shutter for Sony supports TIMER CONTROL and 5 SHUTTER MODES. 5 SHUTTER MODES: S (single shooting), C (continuous shooting), B (Bulb), 2S (2 seconds delay) and TIMER. The timer intervalometer remote is great for time-lapse recording of blooming flowers, astrophotography, and continuous shots for star trails etc. You will never get another blurry shot using this remote control | MORE FEATURES: Timing setting can be accurate to 0.1 second. 5 settings for TIMER CONTROL: Delay (Self timer), Interval (Interval timer), Long (exposure timer), N (number of frames setting) and BKLN (Auto bracketing timed exposure setting for HDR, shutter release with instant, continuous 3, 5 or 7 shots). 2.4GHz wireless transmission, the camera remote shutter with timer reduce camera shake and allow you to remotely control photos up to 60+ meters with ultra-powerful anti-interference ability | The wireless timer compatible with Sony a1, a9, a9M2, a7, a7M2, a7M3, a7M3K, a7M4, a7R, a7RM2, a7RM3, a7RM4, a7RM5, a7S, a7SM2, a7SM3, a6600, a6100, a6400, a6500, a6300, a6000, a5000, a5100, a5100L, a5100Y, a3000, a3500, QX1; HX300, HX350, HX400, HX400V, HX50, HX50V, HX60, HX60V, HX99, HX95, HX90, HX90V, HX80, QX30, RX0, RXOM2, RX100M2, RX100M3, RX100M4, RX100M5, RX100M5A, RX100M6, RX100M7, RX10, RX10M2, RX10M3, RX10M4, RX1RM2, WX500, WX700, WX800; A58, A68; NEX-3N; ZV-1 | LCD DISPLAY: Easy to use, quick set up. The LCD display provides visual reference to your settings and offers an easier way to store the prior settings. So once it’s setup its pretty easy to simply change the number of seconds for a longer or shorter exposure time. It also illuminates for working in low-light situations even in dark, which is very convenient to get accurate shooting mode. Replaces Sony RM-SPR1 | COST-EFFECTIVE: Only need to change different shutter release cable to work with different cameras. Wireless and wired operations without occupying camera’ s hot shoe. Use AAA batteries (2 in the transmitter and 2 in the receiver, not included in package).

Multifunctional: This replacement Sony remote shutter release support four shutter release modes: continuous shooting mode, long exposure / Bulb mode, single shooting mode, and three seconds delay shooting mode, which are great for taking selfie, family pictures and steady shots hands-free. Replaces Sony RM-SPR1 | Reliable and Practical: The remote shutter for Sony use 2.4GHz technology with strong anti-interference, works stable up to 80m. Support autofocus and eliminate camera shake by releasing the shutter remotely. The controller is small enough to not be a problem hiding in most photos. Easy to setup, all you have to do is make sure plug it in to the remote outlet on the side of the camera (you do not have to attach the remote to the hot shoe) and control the camera remotely at any direction | The remote shutter S8 compatible with Sony a1, a9, a9M2, a7, a7M2, a7M3, a7M3K, a7M4, a7R, a7RM2, a7RM3, a7RM4, a7S, a7SM2, a7SM3, a6600, a6100, a6400, a6500, a6300, a6000, a5000, a5100, a5100L, a5100Y, a3000, a3500, QX1; HX300, HX350, HX400, HX400V, HX50, HX50V, HX60, HX60V, HX99, HX95, HX90, HX90V, HX80, QX30, RX0, RXOM2, RX100M2, RX100M3, RX100M4, RX100M5, RX100M5A, RX100M6, RX100M7, RX10, RX10M2, RX10M3, RX10M4, RX1RM2, WX500, WX700, WX800; A58, A68; NEX-3N; ZV-1 | Elegant Appearance and Design: The shape of the remote shutter release is like a pebble, nice shape, very slick & great feel, and there will be no rubbing feel just as holding with square frame one. This wireless pebble shutter remote control has smooth lines matched with the mainstream classic black color, which is very delicate, portable, lightweight and textured | Battery: No more hunting for odd batteries. The receiver needs to install 2 AAA batteries (not included in the package), and the transmitter needs to install a CR2032 battery (included in the package), which are much more convenient than lithium batteries. Don't forget to turn the receiver off and take batteries out after using it to prevent battery on the unite running out in a few days.

【One adapter, so many options】AI / F mount lens to Nikon Z mount camera body, explore new lens combinations, compatible for Nikon AI / F / AIS / AF / AF-I / AF-S mount lens to Nikon Z Mount Cameras compatible with Nikon Z fc, Z30, Z9, Z8, Z6 II, Z7 II, Z6, Z7, Z5, Z50 | 【No loss of image quality or speed】Infinity focus allowed. There is no electronic contacts or glass inside of this lens adapter, so have to manually adjust all settings (no autofocus) and no need to worry about optic degradation of your lenses. Connected lenses retain all of their superb image quality with no loss of brightness, contrast or speed | 【New exterior design, solid & durable】Aesthetics and streamlined exterior design means comfortable shooting in any direction, including vertically. The adapter, with Difficult-To-Machining tooth design, matched the nice look of your cameras and lenses. Built from aviation grade aluminum and magnesium alloy, the MOUNT ADAPTER is strong and lightweight with a durable finish, really very resistant and performing for vintage lenses | 【Precisely matched】The lens mount adapter compatible with Nikon Z mount is well constructed and makes a tight fitting connection to the lens and camera body, to preserve the performance of pro-level cameras and lenses. And it makes a precise fit with the camera and lens, crucial for meticulous performance. Attaches and detaches to the camera body smoothly and cleanly. No light leakage. Keep using the lenses you love with the most innovative camera bodies available | 【Clever design】Easy to mount and dismount. Travel lighter, use one set of lenses with two camera bodies. Best of new and old, use vintage lenses with your digital camera.【Note】You must set in the camera menu to "shoot with no lens attached"