【Multiple Mounting Points】Nitze NATO top handle PA28-A is filled with 1/4”-20 threaded holes, 1/4” locating holes, 3/8” ARRI locating holes all around the handle for more accessories expansion. | 【Ergonomic Design】Nitze stinger handle is ergonomically designed to provide you with a more comfortable experience during long-time shooting. | 【Cold shoe Adapter】The top handle is equipped with a cold shoe adapter which can be attached by two 1/4” screws. You can mount it in different locations on the handle for flexibility. | 【Built-in NATO Rail and Clamp】Built-in NATO rail on the top provides convenience for attaching accessories with NATO clamp. NATO clamp on the bottom of the handle can be quickly attached and detached by the quick release lever. | 【Adjustable NATO Clamp】If you find that your NATO rail doesn't fit properly, please adjust the NATO clamp. (1) Unscrew the four screws at the bottom; (2) Take out the NATO clamp and red QR lock lever; (3) Slide the clamp on your NATO rail; (4) Tighten or loosen the star wheel by the red QR lock lever; (5) Put the NATO clamp back and lock the four screws.

【Dedicated Design】Nitze T-S08A XLR handle top plate made of aluminum alloy is specially designed for Sony FX3 / FX30 XLR-H1 XLR Handle Unit. Rubber pads prevent your handle from being scratched. | 【Easy to Install】The XLR handle top mounting plate can be locked to the top side of the XLR handle with a 1/4” screw. | 【Multiple Mounting Points】There are many 1/4" threaded holes, 1/4” locating holes and a cold shoe for accessories expansion,such as LED lights, wireless transmitter, monitors,etc. | 【Lightweight and Durability】The FX3/FX30 XLR handle top plate weighs only 41g. And aluminum alloy material has a good heat dissipation which offers you a good shooting condition. | 【Recommended Match】The XLR top plate can be mounted with Nitze XLR handle extension rig T-S08B at the same time.

【Adjustable V Mount Plate】Nitze N21-D7B aluminum v mount battery plate features an adjustable arm which allows you to quickly adjust the v mount adapter plate to your desired position without any tools. | 【Detachable 15mm Rod Clamp】The v mount battery plate comes with a removable 15mm rod clamp, which can be mounted vertically or horizontally with two 1/4" screws. | 【DC&D-tap Output Ports】The v mount adapter provides one 8V/3A DC jack and two 14.8V/3A D-tap sockets. | 【USB-C Output Port】The USB-C port of the v mount plate supports 5V/2.4A,9V/3A,12V/2A (PD3.0/QC3.0/FCP) output. | 【Multiple Mounting Options】Nitze v mount plate features two M3 countersinks and two 1/4" countersinks. You can mount the v-mount plate to the cheese plate with two M3 or 1/4" screws, or to the 15mm rod system rig with the 15mm rod clamp with adjustable arm.

【Aluminum Alloy Material】Nitze N21-D6 v mount battery plate is made of aluminum alloy which is sturdy and durable. | 【DC&D-tap Ports】The v mount plate provides one 8V/3A DC jack and two 14.8V/3A D-tap sockets. | 【USB-C Port】The USB-C ports of the mini v mount plate supports 5V/2.4A,9V/3A,12V/2A(PD3.0/QC3.0/FCP) output. | 【Accessories Match】The v mount battery plate can be connected with E2-FS-V series v mount adapter by two 1/4” screws. | 【Note】Please pay attention to use the same adapter cable as the v mount plate interface voltage to avoid short circuit.