Nitze N50C magic arm has double ballheads with a 1/4”screw ARRI locating pins on the end individually for attaching cages and monitors etc. | Articulating magic arm is made of aluminum alloy for lightweight and stability. | Camera monitor articulating arm has anti-skid rubber rings of increasing the friction of each of ballhead. A non-slip rubber pad prevents devices you connected from scratching. | The quick release wingnut with 1/4”& 3/8”threads is to loosen and tight the ballhead easily for adjusting the height and position you need. | There are also some 1/4”- 20 threaded holes for your convenience to mount other accessories.

【Adjustable Rail】Nitze MF15D follow focus features an adjustable rail above the 15mm rod clamp. It can be adjusted within 50 mm to fit your desired lens by twisting the red thumbscrew at the bottom. | 【A/B Hard Stops】The follow focus system supports to preset A/B hard stops focal length or use 360° infinity zoom. Built-in threaded holes allow you to put A/B hard stops screws inside when not in use to prevent loss. | 【Reversible Drive Gears】The follow focus kit contains 1 x 0.8 Mod/38 Teeth, 1 x 0.8 Mod/43 Teeth, 1 x 0.8 Mod/65 Teeth drive gears. And the drive gear is reversible. It can be mounted on the front or back side of the follow focus to meet different focusing needs. | 【Three Marking Disks】The follow focus comes with three marking disks for interchangeble. Snap on magnetic marking disk can be easily attached or detached. | 【Crank & Gear Ring Belt】T006-03 crank is included for speedy and accurate focusing. The gear ring belt can be used when your lens is without 0.8 pitch gears.

【Special Design】Nitze N04F lens support is specially designed for Laowa 24mm T8 2X Macro Pro2be lens. It provides stable support for the lens and ensure smooth shooting. | 【Rolling Ring holder】Three rolling wheels in the ring holder help you to rotate your Laowa Pro2be lens smoothly. | 【Horizontal and Vertical Adjustment】It supports horizontal adjustment of up to 4 mm and vertical adjustment of 61 mm. Easy adjustment ensures that the lens is flush with the desired position. | 【Snap-on Rod Clamp】The lens support is compatible with the 15mm LWS rod system. The snap-on design allows you to mount to the 15mm rods more conveniently. | 【Easy to Install】The lens can be securely locked by rotating the black thumbscrew. The 15mm rod clamp can be tightened by rotating the silver thumbscrew.

【Anodized Aluminum Alloy】Nitze lens support N04 is made of aluminum alloy for ruggedness and durability. And it is anodized to premium silver gray for a sophisticated look. | 【Snap-on Rod Clamps】The 15mm lens support bracket features a snap-on design. You can attach or detach the lens support at any position of the rods instead of from the ends. | 【Vertical Adjustment】The height of the lens support can be adjusted up to 21mm by tightening the thumbscrew. | 【Widely Use】The lens support bracket can be used for different lenses with diameters in the range of 50 to 140 mm. | 【For Stable Shooting】The Y-bracket firmly supports your lens, allowing you to have a more stable shot.

【Convenient to Use】Nitze R15-A4A100 15mm rod with 1/4" locating pins is designed for direct connecting to a camera cage or top handle which has 1/4" locating holes. | 【Anti-deflection Design】The 15 mm rod features a 1/4" screw and locating pins. The locating pins support it to be locked more securely and prevent the deflection. | 【Mounting Method】Turning the thumbscrew to locking the rod. The small holes on the thumbscrew allow it to be locked more firmly by using a hex spanner. | 【100mm Length】The length of the 15mm aluminum rod is 100mm ( 4 Inch). It provides you with sufficient space to extend the equipment. | 【Scratch Resistance】The 15mm rod is made of anodized aluminum alloy for durability. And the silicone pad can effectively prevent your rigs from being scratched.

【Standard 15mm Rod】Nitze R15-1/4-KIT 15mm rod kit features a standard 15mm diameter and is suitable for all accessories with 15mm rod clamp. | 【Unlimited Extension】Interfaced 1/4” screw and 1/4” threaded hole in the each end of the 15mm rod can be used to extend the rod length without using a connection screw. | 【1/4" Screw Locking】The 15mm rod can be screwed directly on any accessories with 1/4" threaded holes. The small holes on the rod allow it to be screwed tighter by using a hex spanner. | 【Aluminum Alloy Material】The 15mm rod kit with 1/4" screw is made of anodized aluminum alloy for strength and durability. | 【Package Includes】Nitze R15-1/4-KIT 15mm rod kit includes 3 rods: 1" 15mm rod x1, 2" 15mm rod x1, 3" 15mm rod x1.

【Lens Protection】Nitze N04B lens support is made of anodized aluminum alloy for high durability. The wheels on the Y-shaped bracket can prevent the lens from scratching without affecting the rotation of the zoom ring or focus ring. | 【High Compatibility】Available lens diameter is up to 147mm. Vertical and horizontal adjustment is 33mm and 4mm respectively. | 【Snap-on Design】The snap-on design supports the mounting or removal of the lens holder to a 15mm rod without removing attachments from other rods. | 【Y-Bracket】Universal Y shape bracket is compatible with the lenses without support foot or tripod collar. | 【For Different Lenses】The lens support includes a 1/4”-20 cap, a 3/8”16 cap, a M3 cap and a 1/4"-20 height extension post for attaching lenses feature different threaded holes.

【High Compatibility】Nitze JT-A02B monitor cage with sunhood is compatible with Atomos Ninja V/Ninja V+/Shinobi/ZATO CONNECT monitor. | 【Securely Locking】Firmly locking your monitor by two 1/4” screw on the top and bottom of the cage. | 【Built-in NATO Rail】Built-in NATO Rail on the bottom of the cage makes your accessories expansion more quickly and convenient. You can mount accessories with NATO clamp directly such as Nitze N54 Series monitor holder. | 【HDMI Cable Clamp】PE11 HDMI cable clamp firmly fixes your HDMI cable and prevents it from shifting or being damaged. | 【Sunhood】The Sunhood meets outdoor and glare shooting needs, and it can be unloaded easily by releasing the Velcro strap.

【High Compatibility】Nitze JT-A05A monitor cage is compatible with Atomos Ninja / Ninja Ultra / Ninja V / Ninja V Plus / Shinobi / ZATO Connect monitor. | 【Securely Locking】Firmly locking your monitor by two 1/4” screw on the top and bottom of the cage. | 【Mounting Points】Built-in cold shoe on the top of the cage can be used to attach accessories with cold shoe adapter. And there are some 1/4” locating holes for accessories extension. | 【Built-in NATO Rail】Built-in NATO Rail on the bottom of the cage makes your accessories expansion more quickly and convenient. You can mount accessories with NATO clamp directly such as Nitze N54 Series monitor holder. | 【HDMI Cable Clamp】PE11 HDMI cable clamp firmly fixes your HDMI cable and prevents it from shifting or being damaged. It can be mounted to the cage or to the monitor directly.

【Dedicated Design】Nitze JT-A03C cage kit is specifically designed for Atomos Shogun CONNECT monitor. It securely locks your monitor with two 1/4” screws on the top and bottom. | 【Built-in NATO Rail】Built-in NATO rail on the bottom of the Shogun CONNECT cage makes your accessories expansion more quickly and convenient. You can mount accessories with NATO clamp directly such as Nitze N54-H Series monitor mount. | 【Multiple Mounting Points】Built-in cold shoe on the top and a variety of 1/4” threaded holes and 1/4” locating holes provide multiple mounting options for accessories extension. | 【Sunhood】The included Sunhood prevents reflections on the Shogun CONNECT monitor, and make the display clearly in dazzling light condition during shooting. | 【Mounting Plate】The included mounting plate can be installed on the top by a 1/4” screw with locating pins (the locating pins can be detached by the included flat-head screwdriver) . You can mount a v mount plate such as Nitze N21B/N21C/N21F mini v mount plate to attach a v mount battery.

【Dedicated Monitor Cage】Nitze JT-B02B monitor cage with sunhood is compatible with Blackmagic Design Video Assist 7" 12G-SDI/HDMI HDR recording monitor. Firmly locking your monitor by two 1/4” screws on the top and a 1/4” screw on the bottom of the cage. | 【Multiple Mounting Points】There are many 1/4", 3/8" threaded holes, 1/4” locating holes for accessories extension. Built-in Cold Shoe on the top of the cage can be used to attach accessories with cold shoe adapter. And there are some 1/4” locating holes for accessories extension. | 【Built-in NATO Rail】Built-in NATO Rail on the top and bottom of the cage makes your accessories expansion more quickly and convenient. | 【Included HDMI and USB-C Cable Clamp】The PE26 HDMI cable clamp and PE30 USB-C cable clamp that firmly fix your cable and prevent it from shifting or being damaged. | 【Nylon Sunhood】LS7-A sunhood prevents the display from reflecting light, making your display clearly visible in harsh lighting conditions during shooting.

【With Sunhood】The G7-Kit monitor cage is equipped with a slot for the sunhood, which can be installed with the Nitze LS7-G7 hood, and compatible with the origin sunhood of OSEE G7 T7 monitor. Nitze hood is made of high-quality Oxford cloth material, which can prevent damage to the lens and reduce glare. | 【Four Sides NATO Rails】 Bult-in NATO rails on the four sides, multiple 1/4" and 3/8" ARRI locating holes can be external accessories, support you attach accessories you need for shooting. | 【Anti-deflection Design】G7-Kit monitor cage protruding block are added to prevent the monitor from protruding from the front. OSEE G7 T7 cage has a shoulder strap slot which can be use our attached shoulder strap for easy carrying. | 【1/4” Screws】Securely locked your monitor by two 1/4” screws from the top and bottom. The screw sleeves on the bottom of the cage increase the durability of the threaded holes. | 【Package Included】Nitze G7-Kit monitor cage designed for the 7 Inch OSEE G7/T7 which includes G7-Kit monitor cage，LS7-G7 Sunhood, N58-J Shoulder Strap and N54-G3 Monitor Holder Mount.180° tilt and 360° pan rotation. 1/4 screw with ARRI standard locating pins preventing deflection.

【High Compatibility】Nitze JTP2-BM5 cage with sunhood is compatible with PortKeys BM5 III / BM5 III WR / BM5 WR 5.5" monitor. | 【Multiple Mounting Holes】Several 3/8" ARRI locating holes, 1/4" locating holes, 1/4" threaded holes for accessories expansion. | 【Dual-use Cold Shoe】The built-in cold shoe on the right of the cage, which can be used as a cooling port when not in use. | 【HDMI Cable Clamp】The included PE13 HDMI cable clamp securely holds your HDMI cable from shifting and twisting. | 【Nylon Sunhood】LS5-B nylon sunhood prevents the display from reflecting light, making the display clearly visible in harsh lighting conditions during shooting.

【High Compatibility】Nitze JT-I01B cage with sunhood is compatible with PortKeys LH5P and LH5P II monitor. It's designed for all-round protection and accessories expansion. | 【Multiple Mounting Points】Multiple 1/4”-20, ARRI locating holes and built-in cold shoe provide more possibility for mounting extra accessories. | 【Included HDMI Cable Clamp】The PE21 HDMI cable clamp firmly fixes your HDMI cable and prevents it from shifting or being damaged. | 【Included Sunhood】The Sunhood prevents reflections on the monitor, and make the display clearly in dazzling light condition during shooting. | 【Screw Sleeves】The screw sleeves on the bottom of the cage increase the durability of the threaded holes.

【Aluminum Alloy Material】Nitze cage for PortKeys LH7P / LH7H monitor is made of anodized aluminum alloy for lightweight and durability. | 【Mounting Method】The cage is locked by a 1/4” screw on the bottom and two 1/4” screws on both sides via the included hex spanner. | 【Built-in NATO Rail】Built-in NATO rail on the bottom makes your accessories installation more quickly and conveniently. Nitze N54-H series monitor mount with quick-release NATO clamp is a good match. | 【Multiple Mounting Points】Built-in cold shoe, multiple 1/4”-20 threaded holes, 1/4” and 3/8” locating holes provide more possibilities for mounting compatible accessories. Reserved strap slots for shoulder strap attachment. | 【Included PU Sunhood】The included sunhood LS7-A2 is made of PU leather which is more exquisite. It prevents reflections on the monitor and makes the display clear in dazzling light conditions during shooting.

【Durable & Convenient】Nitze JT-B01A cage provides a lightweight and sturdy aluminum alloy frame for Blackmagic Video Assist 5" 12G / Blackmagic Video Assist 5" 3G monitor without obstructing any ports of the monitor. | 【Multiple Mounting Points】Built-in cold shoe, a variety of 1/4" threaded holes, 1/4” locating holes and sunhood slots on the video Assist 5" 12G/3G cage supports abundant accessories extension. | 【Locking method】Securely locking your video Assist 5" 12G/3G monitor by two 1/4”-20 screws on the top left corner and lower right corner. | 【HDMI and USB-C Cable Clamps 】The USB-C cable clamp and the HDMI cable clamp can firmly fix your cables and prevent them from shifting or being damaged. | 【Included Sunhood】The included sunhood prevents reflections on the monitor and makes the display clearly in dazzling light condition during shooting.

【Ergonomic Design】Nitze PA29D camera side handle is made of aluminum alloy and covered with rubber for non-slip and durability. Ergonomic design provides you a good handheld feeling during long-term shooting. | 【Detachable Locating Pins】The Locating pins of the side handle can be removed with the included hex spanner to change the orientation or become a 1/4" screw. | 【For Left or Right Hand】The connecting section can be mounted to both sides by two M4 Screws. You can use it as a left side handle or right side handle. | 【Up and Down Adjustable】The height of the connection part can be adjusted. | 【Mounting Points】One built-in cold shoe, six 1/4” threaded holes and one 3/8” ARRI locating holes on the top of the side handle for accessories expansion. The strap slots can be used to mount Nitze N58-R2 hand strap.

【Ergonomic Design】Nitze PA29E camera side handle is made of aluminum alloy and covered with rubber for non-slip and durability. Ergonomic design provides you a good handheld feeling during long-term shooting. | 【Detachable Locating Pins】The Locating pins of the side handle can be removed with the included hex spanner to change the orientation or become a 3/8" screw. | 【For Left or Right Hand】The connecting section can be mounted to both sides by two M4 Screws. You can use it as a left side handle or right side handle. | 【Up and Down Adjustable】The height of the connection part can be adjusted within 28 mm. | 【Mounting Points】One built-in cold shoe, six 1/4” threaded holes and one 3/8” ARRI locating holes on the top of the side handle for accessories expansion. The strap slots can be used to mount Nitze N58-R2 hand strap.

【Rubberized Aluminum Side Handle】Nitze PA29A side handle with ARRI rosette is made of aluminum alloy and covered with rubber for more comfortable grip and durability. It can be mounted to camera or monitor cages. | 【Ergonomic Design】Ergonomic design handle is comfortable to hold, and it is not easy to get tired for long-term shooting. | 【For Left or Right Hand】The ARRI rosette connecting section can be mounted to both sides by two M4 Screws. You can use it as a left side handle or right side handle. | 【Up and Down Adjustable】The height of the connection part can be adjusted within 28 mm. | 【Mounting Points】One built-in cold shoe, six 1/4” threaded holes and one 3/8” ARRI locating holes on the top of the side handle for accessories expansion. The strap slots can be used to mount Nitze N58-R2 hand strap.

【Rubberized Aluminum Alloy Handle】Nitze PA29C side handle with NATO clamp is made of aluminum alloy and covered with rubber for more comfortable grip and durability. It can be mounted to camera or monitor cages. | 【Ergonomic Design】Ergonomic design handle is comfortable to hold, and it is not easy to get tired for long-term shooting. | 【For Left or Right Hand】The NATO clamp connecting section can be mounted to both sides by two M4 Screws. You can use it as a left side handle or right side handle. | 【Up and Down Adjustable】The height of the connection part can be adjusted within 28 mm. | 【Mounting Points】One built-in cold shoe, six 1/4” threaded holes and one 3/8” ARRI locating holes on the top of the side handle for accessories expansion. The strap slots can be used to mount Nitze N58-R2 hand strap.

【Dedicated Design】Nitze XLR handle extension rig made of aluminum alloy is specially designed for Sony FX3 / FX30 XLR-H1 XLR Handle Unit. It locks with two 1/4” screws on the top and right side. | 【33mm Extendable Length】The XLR handle can be extended by 33mm with the installation of the extension rig. It offers you a more comfortable handheld feeling. | 【Built-in NATO Rail】Built-in quick release NATO rail on the top side for mounting other devices with NATO clamp quickly and easily. It can be matched with Nitze N54-F2/N54-G2 NATO monitor mount. | 【Multiple Mounting Points】There are many 1/4" threaded holes, 1/4” locating holes and 3/8” locating holes for accessories expansion, such as batteries, monitors,etc. | 【3/8” to 1/4” Thread Adapter】The included 3/8" to 1/4" thread adapter helps you easily turn a 3/8" threaded hole into a 1/4" threaded hole.

【Dual QR NATO Clamp】Both sides of the monitor holder is quick release NATO clamp. It can be quickly mounted to any accessories with NATO rail by swinging the QR lock lever. | 【Aluminum Alloy Material】 It is made of aluminum alloy for lightweight and stability. | 【180° Tilt and 360° Swivel】 The monitor holder mount supports 180° tilt and 360° swivel. Tilt or swivel damping can be adjusted through the M4 screws with the included hex spanner. It supports free stop at any position without worrying about the monitor falling. | 【High Payload】 The payload of N54-H3 monitor holder mount is up to 5KG. | 【Low Profile Design】Low profile design keeps the monitor closer to the handle or the camera cage. The rubber pad on the top prevents your monitor from scratching.

【High Payload Capability】The payload of Nitze Elf series N54-G5 monitor holder mount is up to 5 KG. It can firmly fix the monitors from 5” to 7”. | 【Tilt and Swivel Adjustment】The monitor holder mount supports 180° tilt and 360° swivel. Tilt or swivel damping can be adjusted through the M4 screws with the included hex spanner. It supports free stop at any position without worrying about the monitor falling. | 【Retractable Locating Pins】Spring design 1/4” locating pins are retractable. You can mount it on the monitors with 1/4” locating holes or only with 1/4” threaded hole. | 【Low Profile Design】Low profile design keeps the monitor closer to the handle or the camera cage. The rubber pad on the top prevents your monitor from scratching. | 【Securely Locking】The monitor mount is conveniently locked by turning the built-in thumbscrew. The holes on the thumbscrews allow the monitor mount to be more tightened with the included hex spanner.

【High Payload Capability】The payload of Nitze Elf series N54-G4 monitor holder mount is up to 5 KG. It can firmly fix the monitors from 5” to 7”. | 【Tilt and Swivel Adjustment】The monitor holder mount supports 180° tilt and 360° swivel. Tilt or swivel damping can be adjusted through the M4 screws with the included hex spanner. It supports free stop at any position without worrying about the monitor falling. | 【Retractable Locating Pins】Spring design 1/4” locating pins are retractable. You can mount it on the monitors with 1/4” locating holes or only with 1/4” threaded hole. | 【Low Profile Design】Low profile design keeps the monitor closer to the handle or the camera cage. The rubber pad on the top prevents your monitor from scratching.onitor from scratching. | 【Securely Locking】The monitor mount is conveniently locked by turning the built-in thumbscrew. The holes on the thumbscrews allow the monitor mount to be more tightened with the included hex spanner.

【High Payload Capability】The payload of Nitze Elf series N54-F4 monitor holder mount is up to 5 KG. It can firmly fix the monitors from 5” to 7”. | 【Tilt and Swivel Adjustment】The monitor holder mount supports 180° tilt and 360° swivel. Tilt or swivel damping can be adjusted through the M4 screws with the included hex spanner. | 【Free Stop】It supports free stop at any position without worrying about the monitor falling. | 【Rubber Pad】The rubber pad on the top can effectively prevent friction and scratching with the monitor or monitor cage. | 【Securely Locking】The monitor mount is conveniently locked by turning the built-in thumbscrew. The holes on the thumbscrews allow the monitor mount to be more tightened with the included hex spanner.

【High Payload Capability】The payload of Nitze Elf series N54-F2 monitor holder mount is up to 5 KG. It can firmly fix the monitors from 5” to 7”. | 【Tilt and Swivel Adjustment】The monitor holder mount supports 180° tilt and 360° swivel. Tilt or swivel damping can be adjusted through the M4 screws with the included hex spanner. | 【Free Stop】It supports free stop at any position without worrying about the monitor falling. | 【Rubber Pad】The rubber pad on the top can effectively prevent friction and scratching with the monitor or monitor cage. | 【Securely Locking】The monitor mount is conveniently locked by turning the built-in thumbscrew. The holes on the thumbscrews allow the monitor mount to be more tightened with the included hex spanner.

【Form-fitting Design】Nitze T-F02A cage for GFX 50S II / GFX 100S camera features a form-fitting design that allows full access to all camera operation buttons, card slot, battery door and screen. | 【Firmly Locking】The cage is locked by two M2.5 screws on both sides and a 1/4” screw on the bottom of the cage to prevent your Fujifilm gfx 50sii or gfx 100s camera from twisting. The rubber pads on the bottom of the cage prevents your camera from being scratched. | 【Built-in NATO Rail & Cold Shoe】Built-in NATO rail on the left side and built-in cold shoe on the top of the cage allow you to attach other accessories more quickly and easily. | 【Multiple Mounting Holes】Several 1/4”, 3/8” threaded holes, 1/4” locating holes, 3/8” ARRI locating holes are provided for accessories extension. The 1/4” threaded holes on the top front and the 1/4” locating holes on the bottom left front of the cage can be used to mount Nitze MF15C mini follow focus via Nitze R15-1/4-KIT 15mm rod with 1/4” screw. | 【Integrated Arca QR Plate】Built-in Arca Swiss quick release plate on the bottom of the cage supports quick switching between tripod and handheld shooting. It’s also compatible with DJI RS 2, RSC 2, RS 3, RS 3 Pro stabilizers for stabilizer shooting.

【High Compatibility】Nitze N58-R2 hand strap is compatible with mirrorless and DSLR camera, camera cage or side handle. | 【Comfortable Handheld Feeling】The hand strap has built-in cushions to make you feel comfortable during shooting. | 【Length Adjustable】The length of the strap can be adjusted according to the size of the hand to provide suitable tightness.

【Dedicated Design】Nitze N04E2 lens support is specially designed for Laowa 24mm T14 2x PeriProbe lens. | 【Quick Lock & Release】It can firmly lock or release your lens by rotating the knurled thumbscrew. | 【Rolling Ring Bracket】Three rolling wheels in the ring bracket support you to rotate your Laowa PeriProbe lens smoothly. | 【Horizontal & Vertical Adjustment】It supports 4mm horizontal adjustment and 61mm vertical adjustment. | 【Snap on Rod Clamp】The 15mm LWS rod clamp features a snap-on design for easy installation or removal to the 15mm rod system.

【Built-in QR NATO Clamp】Nitze mini top handle grip built-in QR NATO clamp on the bottom of the handle can be quickly attached and detached by the quick release lever. | 【Adjustable NATO Clamp】If you find that your NATO rail doesn't fit properly, please adjust the NATO clamp. (1) Unscrew the four screws at the bottom; (2) Take out the NATO clamp and red QR lock lever; (3) Slide the clamp on your NATO rail; (4) Tighten or loosen the star wheel by the red QR lock lever; (5) Put the NATO clamp back and lock the four screws. | 【Cold shoe Adapter】Mini camera top handle grip equipped with a cold shoe adapter which can be attached by two 1/4” screws. You can mount it in different locations on the handle for flexibility. | 【Multiple Mounting Points】Nitze nato rail top handle PA28M-AK is filled with 1/4”-20 threaded holes and ARRI locating holes all around the handle for additional attachment options and DIY operations, and connect a variety of accessories for expansion. | 【Ergonomic Design】All aluminum alloy material, Nitze nato clamp top handle is ergonomically designed to provide you with a more comfortable experience during long-time shooting. No slip, no sharp edges.

【ARRI Locating Pin】Nitze Stinger Handle is attached and detached by the 3/8” ARRI locating pins on the bottom of the handle.With standard 15mm rod hole, reserved space for you to add extension 15mm rod for more accessories. such as microphone, LED lights etc.15mm rod is not included. | 【Cold shoe Adapter】Mini camera top handle equipped with a cold shoe adapter which can be attached by two 1/4” screws. You can mount it in different locations on the handle for flexibility. | 【ARRI Locating Holes】ARRI locating holes on the front of the handle can be mounted with Nitze N54-F4 low profile monitor holder. The monitor holder mount supports 180° tilt and 360° swivel with free stop. Dynamic design, arbitrarily adjust the monitor angle which you want. | 【Multiple Mounting Points】Nitze mini stinger handle PA28M-CK is filled with 1/4”-20 threaded holes and ARRI locating holes all around the handle for additional attachment options and DIY operations, and connect a variety of accessories for expansion. | 【Ergonomic Design】All aluminum alloy material. Nitze mini top handle is ergonomically designed to provide you with a more comfortable experience during long-time shooting. No slip, no sharp edges.

【All-around Protection】Nitze JTP2-LUT7S cage kit compatible with Feelworld LUT7/ LUT7 PRO/ LUT7S/ LUT7S PRO 7" monitors is designed for providing your monitor an all-round protection without obstructing any ports. | 【Convenient & Durable】Built-in NATO rails on the top side make your accessories expansion more quickly and convenient. And the screw sleeves on the bottom of the cage increase the durability of the threaded holes. | 【Extensive expansion】Multiple 1/4" locating holes, 3/8" locating holes and built-in cold shoe provide more possibilities for mounting additional accessories. The reserved 1/4” locating hole on the right side is compatible with mounting Feelworld original support. | 【HDMI Cable Clamp】The PE21 HDMI cable clamp on the bottom of the cage can firmly fixes your HDMI cable and prevents it from shifting or being damaged. | 【Sunhood】The included sunhood reduces the interference of external light source on the display image color, allowing your Feelworld LUT7/LUT7 PRO/LUT7S/LUT7S PRO monitor more clearly visible during shooting.

【Adjustable Mounting Angle】Nitze MF15C mini follow focus can be installed to your desired angle by using the adjustment knob. | 【A/B Hard Stops】The follow focus system supports to preset A/B hard stops focal length or use 360° infinity zoom. Built-in threaded holes allow you to put A/B hard stops screws inside when not in use to prevent loss. | 【Reversible Drive Gears】The follow focus kit contains 1 x 0.8 Mod/38 Teeth, 1 x 0.8 Mod/43 Teeth, 1 x 0.8 Mod/65 Teeth drive gears. And the drive gear is reversible. It can be mounted on the front or back side of the follow focus to meet different focusing needs. | 【Dual Marking Disks】The follow focus comes with two marking disks for interchangeble. Snap on magnetic marking disk can be easily attached or detached. | 【15mm Rod & Rod Clamp】The single rod follow focus includes a 15mm aluminum alloy rod and a 15mm rod clamp. The 15mm rod clamp with NATO rail locks with two 1/4” screws.

【High Compatibility】The opening diameter of the Nitze MB15AK matte box is 87mm, which can be used for lenses or lens adapter rings with a diameter of 52/55/58/62/67/72/77/82/86mm. For your convenience,we are equipped with 4 lens adapter rings (Φ67/72/77/82mm) which allow you to use the matte box with lenses of different diameters. | 【Locking Method】The top flag of the mini matte box can be adjusted 180° to meet your needs and locked in place by the black knob on the top. The matte box secures the lens or lens adapter ring by the silver thumbscrew. | 【Multiple Mounting Points】Built-in cold shoe on the top, five 1/4” threaded holes and a 1/4” locating holes on the top and bottom of the camera matte box provide multiple mounting options for accessories extension. | 【15mm Rod & Rod Clamp】The matte box comes with a 15mm rod clamp and a 4" 15mm rod with 1/4" screw. The 15mm rod clamp with 1/4" locating pins can be attached to the matte box by the 1/4" locating holes on the bottom of the matte box. | 【Durable and Lightweight Material】Nitze matte box is made of aluminum alloy, carbon fiber and PC. It weighs only 117 gram, making it easy to carry.

【Durable & Convenient】Nitze JT-B01A cage provides a lightweight and sturdy aluminum alloy frame for Blackmagic Video Assist 5" 12G / Blackmagic Video Assist 5" 3G monitor without obstructing any ports of the monitor. | 【NATO Rail & Cold Shoe】Built-in NATO rail on the top make your accessories expansion more quickly and convenient. And the built-in cold shoe on the top allows you to mount microphone or LED light. | 【Multiple Mounting Points】Built-in cold shoe, a variety of 1/4" threaded holes, 1/4” locating holes and sunhood slots on the video Assist 5" 12G/3G cage supports abundant accessories extension. | 【Locking method】Securely locking your video Assist 5" 12G/3G monitor by two 1/4”-20 screws on the top left corner and lower right corner. | 【HDMI and USB-C Cable Clamps 】The USB-C cable clamp and the HDMI cable clamp can firmly fix your cables and prevent them from shifting or being damaged.

【Compatibility】Nitze JT-OE01B Lilmon 5 cage is compatible with Osee Lilmon 5 monitor and its original bracket. | 【Installation Method】It locks the Osee Lilmon 5 monitor via two 1/4" screws on the bottom and right side of the cage to prevent deflection. The reserved holes below the right side locking screw can be used to mount the original bracket. | 【Multiple Mounting Points】The Lilmon 5 cage features built-in NATO rail and cold shoe, 3/8" ARRI locating hole and multiple 1/4" locating holes for accessories extension. | 【Deepen Holes Depth】The monitor cage deepens the mounting holes. You don't have to worry about screw marks or mounting scratches on the monitor body when attaching accessories with screws, such as magic arm, monitor holder. | 【Included Sunhood】Nitze LS5-B2 PU leather sunhood prevents reflections on the monitor and make the display clear in dazzling light conditions during shooting.

【Versatility】Nitze JT-F05B cage kit is compatible with Feelworld F5 PRO/F5 PROX /F6 PLUS/ F6 PLUSX monitor without obstructing any ports of the monitor. | 【Multiple Mounting Points】Built-in multiple 1/4" threaded holes, 1/4” ARRI locating holes and a 3/8” ARRI locating hole provide more possibilities for mounting compatible accessories. It also features sunhood slots and a shoulder strap slot for sunhood and shoulder strap mounting. | 【HDMI Cable Clamp】The included HDMI cable clamp can firmly fixes your HDMI cable and prevents it from shifting or being damaged. The HDMI cable clamp locks by two 1/4" screws on the left side of the cage. | 【Includes PU Sunhood】The supplied LS5-B2 sunhood prevents the screen from being overexposed when shooting outdoors. PU material makes it more exquisite and durable. | 【Mounting Method】It securely locks your Feelworld F6 PLUSX / F6 PLUS / F5 PRO / F5 PROX monitor by two 1/4" screws on the top and bottom of the cage.

【Lightweight and Durable】Nitze N49 NATO rail is made of anodized aluminum alloy for lightweight and durability. It weighs only 20g. | 【Length & Thickness】The length of the NATO rail is 57mm, while the thickness is 9mm. | 【Anti-off Design】The spring loaded anti-off pins on both sides of the NATO rail prevent your accessories from accidentally slipping off. | 【Mounting Method】The NATO rail is locked by two 1/4" screws. You can mount it two any accessories with 1/4" threaded holes. | 【Compatibility】It fits any accessroeis with standard NATO clamp. Such Nitze PA28-A / PA28M-AK / PA28M-D1 stinger handle, PA22-F/PA29A/PA31C side handle, NF49A quick release NATO clamp.

【High Compatibility】Nitze JT-A02A monitor cage is compatible with Atomos Ninja V/Ninja V+/Shinobi/ZATO CONNECT monitor. | 【Securely Locking】Firmly locking your monitor by two 1/4” screw on the top and bottom of the cage. | 【Mounting Points】Built-in cold shoe on the top of the cage can be used to attach accessories with cold shoe adapter. And there are some 1/4” locating holes for accessories extension. | 【Built-in NATO Rail】Built-in NATO Rail on the bottom of the cage makes your accessories expansion more quickly and convenient. You can mount accessories with NATO clamp directly such as Nitze N54 Series monitor holder. | 【HDMI Cable Clamp】PE11 HDMI cable clamp firmly fixes your HDMI cable and prevents it from shifting or being damaged.

Nitze T006-03 follow focus crank is designed for speedy and accurate focus pulls quickly. | Smooth surface L-shape handle provides a good handheld feeling. | Compatible with Nitze follow focus and other follow focus with ARRI standard socket.