It comes with 2pcs 16 inch long industrial 15mm aluminum rods | The diameter of the DSLR rail rod is 15mm standard | This 15mm camera rod is essential for Rod Support System, Matte Box, Rig Cage Handle, Follow Focus mounting on the rods | Inner thread is M12 female thread on each end of a rod so that you could extend the tubes with a M12 threaded connector | Made of Aluminum Alloy, durable yet lightweight
The diameter of the camera rod is industrial 15mm standard | The 4in 15mm rod is widely used on camera riser system and movie making accessories, such as lens support, matte box, follow focus, etc. | M12 inner thread on each end of a rod allows you to use a M12 threaded connector to lengthen the rod as you want | Comes with 2pcs 4 in 15mm rods, well machining and finish | Black anodized aluminum alloy, durable to last long
The diameter of the DSLR camera rod is industrial 15mm standard | The 8 inch 15mm rod is widely used on camera riser system and video making accessories, such as shoulder rig, lens support, matte box, follow focus, etc. | M12 inner thread on each end of a rod allows you to add a M12 threaded connector to lengthen the rail as you want | Comes with 2 pieces, the camera rail is well machining and finish | Black anodized aluminum alloy, sturdy to last long
Niceyrig camera monitor mount 339 enables to use on cage rig with standard ARRI 3/8'' holes. Upper with 1/4’’ screw which can quickly attach to field monitor, LED light, flash, microphone, etc. | Allows 170 degree tilt and 360 degree swivel, adjust by hand. Very convenient for vloggers, photographers or YouTubers in Run-and-Gun shooting | Comes with Arri locating pins on the bottom to prevent twisting | Fatory-set damping with glue, no need to re-adjust. Comes with Allen hex drivers, if necessory, you can use the supplied tool to reset the swivel / tilt axis bolt | Made of aluminum alloy, sturdy and lightweight
The camera handle kit is easy to set up for 15mm shoulder rig system | Exclusively designed to attach side handles to the front of shoulder mount | Stabilizing your camera or camcorder with heavy lens while shooting outside | Comes with two hand grips, 15mm rod clamp and 12" aluminum rod | Made of solid black anodized aluminum, plus cow leather
This easy plate is equipped with various threaded holes( 1/4" 3/8" M3 M4) in 9mm spacing. | It can be attached on railblocks, dovetails and short rods. | It works as a switching plate when mounted to the bottom of a dslr cage. | There is v-lock male adapter for dslr video camera power supply. | Package Includes: 1x easy plate, 1x v-lock adapter, 2x 1/4" screw, 1x hex spanner
It comes with two countersink holes and two 1/4"-20 thread holes for adding accessories | The safety pin prevents accidental accessory removal | Made of black anodized aluminum, durability for long life operation and lightweight | Package Includes: 1x NATO Rail, 2x 1/4 screw, 1x hex spanner
[1.5 INCH LONG] About 38mm, with industrial standard 15mm diameter | [1/4’’-20 INNER THREAD] Threaded on each end of a rod, compatible with 1/4''-20 connection accessories, such as 1/4'' male screw, camera cheese plate, etc. | [15MM ROD SUPPORT] Suitable for 15mm rod clamp, 15mm lens suppport, camera base plate for your DIY operation | Construct from solid aluminum alloy, balck oxizid and smooth finish
WIDE APPLICATION : Industrial 15mm standard, the 4'' 15mm fiber carbon is compatible with 15mm rod rail system, e.g. DSLR cage, handle, 15mm rod mount, etc. | HIGH PERFORMANCE : Shows incredibly rigidity and durability than aluminum alloy or stainless steel tubes, suitable for everyday-use | REDUCE THE WEIGHT OF RIG : 12g of each carbon fiber rod, you feel almost weightless with them on your camera rig, gimbal rig | MATTE SURFACE: Offers excellent grip experience with the carbon fiber style matte sufuce when connects the 15mm rod clamp, ballhead super clamp | PRECISED TECHNIQUE, MINIMAL FLEX: Epoxy resin cured at 248℉ high temperature with inner - unidirectional carbon cloth and surface - 3K carbon cloth ginding, the rod is strong built with almost not flexing, good heat resistance and corrosion resistance
COMPATIBILITY: The 8 inch carbon fiber rod is industrial 15mm standard, compatible with 15mm rail system and other DSLR rod support system | HIGH PERFORMANCE: The carbon fiber rods is super sturdy and durable to heavy use with a lot of weight put on them, great for any cinema setup ! | REDUCE THE WEIGHT OF RIG: Compared to aluminum tubes, these carbon fiber rods may make you feel almost weightless with half of that. | MATTE SURFACE: The surface of the rail features a nice matte finish that allows a better grip when clamping down your camera gear | MINIMAL FLEX: 2mm thick strong structure for almost not flexing
Fits for any industry-standard 15mm rod system that helps to create a more stable, vibration-free platform for shooting | The height of lens bracket is up to 60mm, and you can adjust height as per your need | Works on camera lens with the diameter range from 50mm to 140mm | Screws the Y-shape lens support onto the 15mm rod clamp | Made of aluminum alloy, sturdy and durable
[ COMPATIBILITY ] Universal for 15mm LWS rod support system. | [ HALF-OPEN ROD CLAMP ] Quickly mount and unmount on the 15mm rods and do not have to disassemble your rig. | [ UP TO 64MM VERTICAL ADJUSTMENT ] Extends the Y up high enough to meet most lenses with a thumbscrew, and tighten via a spanner. | [ GREAT STABILITY ] Helps to reduce the weight stress from the camera’s lens mount and features rubber pads on the Y-bracket to protect your lens from wear-and-tear. Besides, offers further security with strap slot on each side | Made of all sturdy aluminum alloy, lightweight and durable
The 15mm Standard Rail Block Bridge Super Lightweight with 1/4"-20 Threads Holes for 15mm Rod Rail Support System DSLR Rig Follow Focus | 15mm rod clamp with standard 60mm spacing, ratchet wingnut allows easy adjustment. | Comes with standard 1/4"-20 threaded holes and unthread holes for more camera rig configurations. | Material: Aluminum Alloy.Solid construction and black anodized treatment for higher durability.
The spacing between the 15mm holes fits standard pieces of equipment. | Perfect for 15mm shoulder rig system | Made of black anodized aluminum and cow leather - handmade, soft and comfortable when holding. Plus, the bottom material is rubber.
15mm rod clamp with slotted screw pattern | Mounted on camera plate, camera cage, camera handle with 1/4" screw for rod extension and other accessories attachment. | Made of Aluminum Alloy, durable and lightweight.
ARRI mount 15mm single rod clamp with a cold shoe | Can attach to the camera cage or top grip for 15mm railblock extension or on the cage side for EVF mount, follow focus, etc. | It provides an easy way to add microphone to your rig | Lock via a 3/8’’-16 screw and tighten with screwdriver | Made of aluminum alloy, sturdy and lightweight
[ SUITABLE FOR HEAVIER RIG ] Main structure is made of aluminum alloy with M6 thread ARRI standard rosette connecting. It is very solid to held your entire heavier rig system. | [ HIGH COMPABILITY ] Applicable for DSLR camera, cinema camera and camcorder such as Sony Alpha A7RIV/A7RIII/A7SIII/A7RIII/A7III, BMPCC 6K Pro/6K/4K, Canon C300/C200/C100, Sony FS7/FS5/F55, BMD USA Mini, RED DSMC2, etc. Optional Niceyrig Riser Plate 403 for replacing if necessary | Equipped with two ARRI standard rosette adapters on the 15mm rod baseplate, it allows to directly attach rosette mount rail handles or extension arms | The shoulder pad comes with a large cheese plate with plenty room and 1/4’’ & 3/’’threaded holes, so you can add various accessories like counter-weights, v-mount battery, articulating arm for rich rig possibilities | Ergonomically designed, the shoulder rig system is very comfortable during long time shooting. Helps to making steady videos and release the equipment pressure on the shoulder
EASY TO BUILD, EASY TO USE ▶This is a unique single hand support 15mm shoulder pad rig system designed to set-up quickly for camera shoulder shooting, and yet free the other hand. Stabilizes your video equipment and provides a comfortable shoulder-mounted shooting experience especially when a long time shooting is required | WIDE COMPATIBILITY ▶Compatible with DSLR, mirrorless cameras, and camcorders such as FS7 / FS5 / FX6 / FX9 / PXW-Z280- Z280V- Z190-Z150 / FDR-AX1E, Panasonic AJ-PX298MC / AJ-UPX360MC / AG-UX180MC / AG-UX90MC / AG-CX98MC and handheld DVPX285, etc. Recommended Max. Payload 22 LB | ERGONOMIC SHOULDER PAD WITH SHOULDER CURVE SHAPE CHEESE PLATE ▶Comes with NICEYRIG Best SELLING 15mm Shoulder Pad S485 offers superior comfortable shoulder experience during filming and lots of mounting points for accessories such as v-mount battery, counterweight, wireless gear or re-configure your rig | ANTI-SWEAT & NON-SLIP 15MM ROD HANDLE ▶Made of cow leather, natural material to assist with balance, comfort grip and featuring 360 degree rotatable function mounting onto the rod with a 15mm rod clamp. The 15mm LWS rod system allows you to rig with accessories like monitor, microphone, super arm ballhead... | MOUNTING THE CAMERA OR CAMCORDER ▶It comes with a big cheese plate to mount different types of video camera with its 1/4’’-20 screw. Simply to assemble the parts through 15mm rod mounts. | ALUMINUM ALLOY STRONG AND LIGHTWEIGHT STRUCTURE | Constructed from full metal, highly resistant to oxidation, the shoulder mount kit is sturdy and durable. Weighs only 1.76 lb for easy carry
[ SHOULDER RIG BUILT WITH 15MM RODS ] Universal for DSLR camera, cinema camcorder such as BMPCC 4K/6K/6K Pro, Panasonic G7/G9/GH5, Canon C100/C200/C300, Sony FS7/FS5/F55, BMD URSA Mini, RED, etc. Maximum Payload 22lb | [ LOTS OF MOUNTING OPTION ] Features a cheese plate with plenty room and 1/4'' & 3/8'' threaded holes, which allows you to add accessories like counter-weights, v-mount batteries, magic arm on your shoulder mount | [ EASY TO SETUP AND TAKE OFF ] Quick release via both wingnuts, so you can move the camera from shoulder system to tripod. Secure your camera gear to the base plate with a 1/4'' or 3/8'' screw | [ STEADY HANDHELD SUPPORT ] The 15mm rail-mounted handle set provides a good support for your entire shoulder rig. Made of cow leather, comfortable to hold. | [ SUITABLE TO USE ALL DAY ] Constructed from solid aluminum alloy, the rig is light that you won't feel it heavy on your shoulder. Help to release pressure when you do Run-and-Gun shooting or need to keep long time shoots
The Camcorder Shoulder support kit is designed for poeple who keep long time shooting to help release pressure. The design of the 15mm shoulder pad integrates with ergonomics, which makes it very soft and comfortable. The shoulder pad improves stability on photographing. Plenty of room and holes for mounting balance weights, V-Mount batteries, etc. A great assisstant for you. | Quick release plate kit is mounted on 15mm shoulder pad with two 1/4 screw. Compatible with Manfrotto 577, 501, 504, 701, the quick release plate could replace your Manfrotto quick release plate and be mounted on tripod directly. So you could switch your shoulder-shoulder shooting to tripod shooting quickly. | There is off-rail prevention on the mounting baseplate, preventing QR plate from removal accidentally. The wingnut with the ability to change the position of the knob to tighten or unscrew to make the QR plate quick release. | The 15mm rod clamp also is mounted on the shoulder plate for you adding to your video rig. | Made of aluminum alloy and sponge, lightweight and durable. Net weight: 17oz
The camera handle kit with rosette is compatible with 15mm shoulder pad rig rod support system. More stable for 15mm shoulder rig system. | The rosette (M6 Thread Diameter 31.8mm) on the handle is replacement for ARRI rosette. The length of the handle is 145mm (5.7inch ). | The spacing of the dual 15mm rod clamp between the 15mm holes is 60mm fitting standard equipment. | The wingnut on the handle and 15mm rod clamp loads spring. You could pull it outside if you don't have a space to rotate. | Made of black anodized aluminum alloy, durable and lightweight.
The rod clamp can mount onto a 15mm standard rod,allows for attaching EVF mount | The dual sided nato rail allows to quick attach or detach accessories with NATO clamp | The rail features 1/4"threaded holes for attaching more accessories | Made of aluminum alloy,sturdy and durable | Multifunctional and lightweight,only weighs 79g
The cold shoe extension comes with three cold shoe mounts, anti-off design with a stop screw in the end. | Easy set-up on various accessories like camera cage, handle, cheese plate via standard ARRI Thread | Very functional, expand to total three shoe attachments such as MIC, flash LED, sound recorder, battery at a time, mounting in the same direction. | Specially offer 1/4''-20 threaded holes and ARRI locating hole on the other two sides for DIY operation | Compact structure, lightweight and sturdy mount to last long
[2XPACK] The 3.5 oz counterweight is suitable for balancing your heavy-side camera on gimbal stabilizers by adjusting its quantity and position ! | Features 1/4’’-20 screw & 1/4’’-20 threaded hole, adding more counterweights if necessary | Compatible with Niceyrig Counterweight Mounting Clamp 323, 324 for stabilizers | Smooth and shiny surface, easy to install | Made of stainless steel, corrosion resistance !
Niceyrig Triple Shoe Mount 328 allow you to attach microphone, flash, LED light, handle and any other accessories via the built-in cold shoe adapters or 1/4’’ threaded holes ! | 360 degree horizontal rotation for adjusting the cold shoe’s direction, still quickly locked via a knurling knob | Features cold shoe adapter on top, plus left & right sides to support total three shoe attachments applicable for Sony, Canon, Nikon universal camera or cage rig | Specially offer multiple 1/4’’ thread holes as another mounting ways for your convenience | Durable aluminum alloy construction, updated version
5'' (126MM) SHORT ROD | Versatile for 15mm rod rail support system such as camera cage, top handle, 15mm rod clamp, base plate, etc | CHEESE DESIGN, MORE FUNCTIONAL | Equipped with 1/4''-20 and 3/8''-16 sufficient locating holes all over the rod for accessories like magic arm, monitor mount, cold shoe mount | M12 INNER THREAD ON BOTH ENDS | It allows you to lengthen the rod size with another rod via M12 rod connector, optional Niceyrig 085 | SOLID AND PRECISE MADE | Constructed from aluminium alloy, the 15mm cheese rod is high quality and super lightweight | OPTIONAL PRODUCT | If you needs longer rods, we provides 7.4'' and 6.2'' long 15mm cheese rod for your options ID: Niceyrig 074 & Niceyrig 541
APPLICATION : Universal for standard 15mm rod support system, DSLR cage rig | HIGH PERFORMANCE : These rods show incredibly rigidity and durability than aluminum alloy or stainless steel tubes, suitable for everyday-use | REDUCE THE WEIGHT OF RIG : 18g of each carbon fiber rod, you feel almost weightless with them on your camera rig, gimbal rig | MATTE SURFACE: Offers excellent grip experience when connects the 15mm rod clamp, ballhead super clamp with the matte finish sufuce | PRECISED TECHNIQUE, MINIMAL FLEX: Epoxy resin cured at 248℉ high temperature with inner - unidirectional carbon cloth and surface - 3K carbon cloth ginding, the rod is strong built with almost not flexing, good heat resistance and corrosion resistance
The diameter of the camera rod is industry 15mm standard | The 15mm rod is mainly used with 15mm grip, rail baseplate, cage top handle and many other DSLR rig system accessories. | M12 inner thread on each end of a rod allows you to add a M12 threaded connector to lengthen the rod as you want | Comes with two units 6’’ 15mm aluminum alloy rods | Sturdy construction and precision made
WIDE APPLICATION | Can attach to any accessory with 15mm rod clamp for rigging camera, like DSLR cage, top handle, baseplate, 15mm rail block... | EXPAND FUNCTION | Features an abundant of 1/4''-20 and 3/8''-16 locating holes for monitor mount, flash light mount like articulating arm, magic arm or side grip | M12 THREAD ON EACH END | Inner threaded on the ends of the rod, it allows you to lengthen the rod size with another rod | STRONG AND PRECISE MADE | Constructed from quality aluminium alloy, the 15mm rail sturdy and lightweight | OPTIONAL PRODUCT | If you need a longer 15mm cheese rod, recommends 7.4'' version ID: Niceyrig 074
Features multiple 1/4''-20 and 3/8''-16 locating holes to mount 15mm rod accessoriess, such as DSLR top handle, baseplate, articulating arm, monitor mount, flash light mount, 15mm rod clamp, etc. | Inner threaded M12 on each end of the camera cheese bar | 7.7'' long, can be replaced the side bar of NICEYRIG UNIVERSAL HALF CAGE 231/233/232/265 to raise cage height | Constructed from aluminium alloy, sturdy and lightweight
Right Angle 15mm Dual Rod Clamp - Specially designed for DSLR camera shoulder pad system easy set-up with 15mm rod rails | Can attach 15mm side handles to support your entire shoulder rig camera riser system | Features 1/4''-20 threaded holes on the front to mount accessories like articulating arm, magic arm, etc. | Made of black anodized aluminum alloy, sturdy and durable
Right Angle 15mm Dual Rod Clamp - Specially designed for DSLR camera shoulder pad system easy set-up with 15mm rod rails | Can attach 15mm side handles to support your entire shoulder rig camera riser system | Features 1/4''-20 threaded holes on the front to mount accessories like articulating arm, magic arm, etc. | Made of black anodized aluminum alloy, sturdy and durable
The diameter of the DSLR camera rods is industrial 15mm standard | The 12'' 15mm rod is widely used on camera riser system and video making accessories, such as shoulder pad, lens support, matte box, follow focus, etc. | M12 inner thread on each end of a rod allows you to add a M12 threaded connector to lengthen the rail as you want | Comes with 2 pieces, the camera rails are well machining and finish | Black anodized aluminum alloy, sturdy and durable
GIMBAL QUICK SET-UP | Allows to directly attach to DJI RS2, RS3 or RS3 Pro just in seconds with built-in fast-assembling part of the power bank holder, no need additional accessory! No need to worry of running out of power! | DETACHABLE COLD SHOE MOUNT | Equipped with counterbores on the bottom, back side of the clamp, very flexible to install the shoe mount horizontally & vertically. Versatile for DSLR camera, camera cage rig, tripod | 50 MM (1.96’’) - 88 MM (3.56’’) WIDE CLAMP | Adjustable clamp, with up to 25 mm (1’’) depth, it accomodates to powerbanks like Anker, ROMOSS, Miady and other brands in the market, and yet mobile phone, LED light, etc. Securely lock through spring-loaded mechanism | SHOCK-PROOF, NON-SLIP FUNCTION | Comes with thick rubber cushions on each side of the inner clamp with matte surface increasing friction and also provides your device all-around protection | MULTIPLE MOUNTING POINTS | Rig possibility with 1/4’’-20 threaded holes e.g. adding supper clamp ballhead magic arm to the holder, cold shoe adapter for microphone | CONSTRUCTED FROM ALUMINUM ALLOY | Sturdy and durable material, build to last long | PPLEASE NOTE ◀ If you need to attach the cold shoe mount on the back side of the holder, firstly remove the gimbal fast-assembling part by Phillips screwdriver
This hdmi cable lock is compatible with a7ii cage/ a7riii cage/ a7sii cage/ a7rii cage. | Attached to the cage with two 1/4"-20 screws, it prevents the HDMI cable from dropping accidentally. | This hdmi cable clamp is designed to protect HDMI transmission cable from being collision or broken, help photographer make their HDMI cable more stable to avoid damaging the HDMI port of the camera. | Package Includes: 1x HDMI cable clamp, 2x 1/4"-20 screw, 1x hex spanner
Cameral Cage for A6100/ A6300/ A6400/ A6000- Perfectly matched to your camera without obstructing camera buttons and dials. A cold shoe on the top of the cage allows to mount articulating arm, EVF mount, microphone. The base plate has anti-skid pads to secure your camera and makes it more stabilized.The unique design structure benefits heat dissipation.Made of aluminum alloy, lightweight and durable. | Wooden Camera Handgrip - Made of authentic myanmar rosewood without painting. It is light and has woody frangance. Fit the ergonomic design. Comfortable for handle shooting. Excellent heat dissipation performance. Prevent your hand from uncomfortableness owing to battery overheating. | Package Includes:1x Camera Cage with Wooden Handgrip, 1x Hex Spanner
FORM-FITTING EOS 6D & 6D MARK II: Protects the camera body from damaging, and yet offers a variety of mounting options to attach accessories. With the cage, slots, flip screen, battery compartment and all controls still get access | SUFFICIENT MOUNTING POINTS: Features 2 cold shoe mounts without obstructing camera original hot shoe. Besides, built-in NATO rail, ARRI &1/4''-20 threaded holes for accessories and attachments, such as microphone, flash light, monitor mount, phone holder, camera handle ( optional NICEYRIG Top Grip 348, 383, 536) etc. | INTEGRATED WITH ARCA-TYPE PLATE: Allows to quikly transfer shooting modes among handheld, Arca-Swiss style tripod and stabilizer | SAFELY PROTECTION: Secured tightly via a 1/4’’ screw and locating pin on the bottom to prevent the camera from twisting. And there are rubber pads on the bottom to protect your camera body from scratching | EASY INSTALLATION: Absorbed a flat-head screw driver underneath easily for quick installation
DSLR CAMERA CAGE- Dedicated for Sony A6300/A6400/A6100/6000, it protects your camera very well and offers you multi mounting options by attaching attachment. Perfectly matched to your camera without obstructing camera buttons and dials ! | DSLR CHEESE HANDLE- The top handle comes with a standard cold shoe mount, multiple 1/4'' and 3/8'' threaded holes, suitable for photographer taking videos | HDMI Cable Clamp - This hdmi cable clamp with a unique anti-skidding lines inside the hdmi lock prevents the hdmi port of camera from being damaged and makes hdmi cable stable. It is mounting easily, fitting for GH4 cage, Odyssey 7Q cage, Sony A6300/A6000 ILCE-6000/ILCE-6300 Sony Nex-7 cage and DSLR rig cage for Sony a7/a7s/a7R. | A cold shoe on the top allows to mount articulating arm, flash light, microphone, monitor. Besides, equipped with 1/4''-20 & 3/8''-16 locating holes through cage body for rig set up. | Made of high quality aluminum alloy, solid and lightweight
This cheese plate is supplied with arrays of mouting holes and grooves, so that you can attach kinds of accessories to it, such as railblocks, gimbal stabilizer, shoulder rig, cages etc. | The Camera Cheease Plate is a multi-purpose mounting plate with plenty of standard 1/4"-20 and 3/8"-16 holes, allowing you to mount articulating arms, rods, batteries, converter boxes and various other camera accessories to your support system. | It can be used on the top of Blackmagic URSA Mini Camera.It is attached to camera top with two 1/4-20 screws. | This camera easy cheese plate could attach a short 15mm rod or 15mm rod clamp bulid a rig. | Net weight 131g
Applicable for Canon EF 200mm f/2L IS USM, EF 200mm f/1.8L IS USM long lens | Features a few 1/4''-20 & ARRI locating holes on the top of handle for accessories. And reduce its weight with grooves | Integrated with ARCA standard quick release plate, so you could directly mount on the ARCA tripod, or just use as a top handle. Built-in a stop screw on each end of the ARCA plate to prevent the handle accidentally sliding from tripod | Convenient to carry the camera equipment with an extra shoulder strap hole on the lens handle's tail | Form-fitting human hand with finger groove like wave, very comfortable to hold