Non-flammable; Safe for use on energized circuits | Compatible with live electrical equipment and electronic components | Chemically inert, Ozone safe | Moisture free | Low toxicity | Applications: Dusting agent and cleaner for use on live circuits and microchips | ATTENTION! HOLD CAN UPRIGHT to avoid ejection of liquid stream during use. Do NOT spray when container is more than 45 degrees off vertical or inverted.

Non-flammable Safe for use on energized circuits. Packaging may Vary | Chills down up to -50 °C (-60 °F) | Non-conductive | Zero residue VOC exempt | Suitable for Use in Food Facilities as a Non-Food Chemical—Canadian and NFS recognition letters available on request

Copper etchant | More aggressive than persulphate alternative | Can be stored and reused | Ready to use solution designed for etching printed circuit boards and other metals | Used for etching copper, brass, bronze, Damascus steel, stainless steel, PCB fabrication, Jewelry making, Metalsmithing, Decorate art knives and other metalwork, Steel sign acid etching, Etching pattern welds, Etching on stone surfaces, Used as a colorant in pit-firing some pottery, Glass casting

99.9% Anhydrous solvent—Removes water and humidity from components leaving them dry | Meets reagent ACS | Meets MIL Spec TT-I-735A and ASTM D770 | Less than 0.001 g/100 mL non-volatile residues | Suitable for use in food facilities as a non-food chemical. NSF International registration #144029

Good low temperature alternative to 1-part TC adhesives with inconveniently high cure temperature | Excellent 1. 44 W/(make) thermal conductivity | 1-to-1 mix ratio and 4 hours pot life | Stores and ships at slightly below room temperature — no freezing or dry ice required. Very long shelf life of at least three years — even when stored at room temperature | Strong water and chemical resistance to brine, acids, bases, and aliphatic hydrocarbons

High thermal conductivity | High dielectric constant | High dissipation factor | Use with heat sinks or metal chassis | Will not dry or harden

Safe on many plastics | Zero residue | Improves signal quality | Static free | For cleaning disk heads, optical tape drive lens, and magnetic tape heads and for cleaning components of VCR, CD, DVD, Blu-ray, magnetic backup systems, minivideo tape cameras, and mini-cassette players.

Contains 140 presaturated wipes (7" x 8") | Resealable inner-bag prevents solvent loss | 70% Isopropyl Alcohol and 30% Deionized water pre-saturated wipes | Safely removes dust, dirt and grease from electronics | Lint free and tear resistant | Recommended cleaning for the following: Audio, video, magnetic, and optical heads Cables Electrical contacts and connectors Fiber optic connectors Optical equipment POS devices and scanners Precision instruments Printed circuit boards Production equipment and workstations Smart phones, pads, laptops, keyboards, and office equipment SMT stencils and screens Surfaces being prepared for coating application

FOR INDUSTRIAL USE ONLY. NOT FOR RETAIL SALE IN CALIFORNIA. | Stays wet longer, each wipe contains 6 ml of liquid | Non Abrassive | Plastic Safe | Lint Free | NSF - Nonfood Compounds Program Listed K2, NSF Registration #144029