【PoE & IP OVER COAX CONVERTER】LINOVISION’s POE IP Over Coax converter can be used to upgrade analog system to IP surveillance system while using existing coaxial cable. Compatible with RG59, RG6 cables. Supports POE standards 802.3af (PoE) and 802.3at (PoE+). EOC Receiver should be powered by POE switch or POE injector while Transmitter should be connected with POE devices or NON-POE devices | 【LONG REACH POE TRANSMISSION】Up to 100Mbps in 300m (1000ft) RG59 cable transmission, max 1000m (3000ft) distance in 10Mbps, working with CCA/CCU RG59/RG6 cable. Support POE power transmission with load capacity 11W over 300m (1000ft) transmission, working with POE IP camera, VoIP phone, POE WiFi AP | 【INDUSTRIAL DESIGN WITH BUILT-IN HEAT SINK】Industrial design, with built-in heat sink, ensure super reliability and hassle free transmission. Indoor use ONLY. Plug-and-play, configuration free, makes installation simplest. Small design (3.1"x2.0"x0.9") and light weight | 【POINT TO POINT CONNECTION ONLY】Act as MoCA (Multimedia over Coax) in point-to-point connection, transmit video/audio/data/control signal over coaxial cable | 【24/7 US LOCAL + GLOBAL TECH SUPPORT】This product comes with 1-year warranty, 24/7 Life-time US LOCAL + GLOBAL Tech Support. Free system consultant service. Just feel free to contact us here. Ready and willing to help in anytime

【IMPORTANT NOTIFICATION】 Due to the signal attenuation, cable quality, PoE mode A/B mis-match or insufficient PoE budget from PoE Supply Units (very common in PoE NVR), our EOC Receiver and EOC-Transmitter may not be powered on. In this situation. Use LINOVISION Mini Passive 2 port PoE Extender, which acts as a PoE booster and PoE mode A/B converter perfectly solve these problems. | 【MODE A/B POE CONVERTER】 Connect LINOVISION Mini Passive 2 port POE Extender as a POE Booster and PoE mode A/B converter between POE Switch/NVR and EOC Receiver, you will get a stronger signal and compatible with Mode A & Mode B PoE. | 【PoE & IP OVER COAX CONVERTER】LINOVISION’s POE IP Over Coax converter can be used to upgrade analog system to IP surveillance system while using existing coaxial cable. Compatible with RG59, RG6, RG11 cables. Supports POE standards 802.3af (PoE) and 802.3at (PoE+). EOC Receiver MUST be powered by POE switch or POE injector while Transmitter should be connected with POE devices or NON-POE devices | 【POE & IP OVER TWIST PAIR CONVERTER】 Each pair of EOC(Ethernet over Coax) Converter is equipped with 2 BNC to Twist Pair connectors, which enables POE over Twist Pair transmission. 100Mbps bandwidth over 330ft regular twist pair cables while 10Mbps over 1485ft for both POE or NON-POE devices. It’s ideal for the CCTV system in elevator cart. | 【POINT TO POINT CONNECTION ONLY】Act as MoCA (Multimedia over Coax) in point-to-point connection, transmit video/audio/data/control signal over coaxial cable, so as being used with twist pair. EOC Receiver should be powered by POE switch or POE injector while Transmitter should be connected with POE devices or NON-POE devices. | 【PASSIVER 2-PORTS POE SPLITTER】LINOVISION 2 ports POE extender is designed to supply POE power to two POE devices through one Cat5/6 cable, and no power adapter is required. It is powered by PoE devices (48V or 53V PoE Switch/PoE NVR/PoE Injector/Mid-span). With this POE splitter, the cabling cost can be dramatically reduced. Moreover, users can easily add extra POE device (like IP cameras,or IP phones) to existing POE cable without running a new cable. | 【UP TO 1,000FT POE + DATA EXTENTION】Extra 330ft POE+Data transmission will be extended with one LINOVISION POE Extender. And it supports two levels cascade deployment, therefore total 1,000ft POE + Data transmission is provided. (The 2nd POE Extender’s POE Input should be connected to the 1st POE Extender’s Out port, not Camera port)

【PoE & IP OVER COAX CONVERTER】LINOVISION’s POE IP Over Coax converter can be used to upgrade analog system to IP surveillance system while using existing coaxial cable. Compatible with RG59, RG6, RG11 cables. Supports POE standards 802.3af (PoE) and 802.3at (PoE+). EOC Receiver MUST be powered by POE switch or POE injector while Transmitter should be connected with POE devices or NON-POE devices | 【POE & IP OVER TWIST PAIR CONVERTER】 Each pair of EOC(Ethernet over Coax) Converter is equipped with 2 BNC to Twist Pair connectors, which enables POE over Twist Pair transmission. 100Mbps bandwidth over 330ft regular twist pair cables while 10Mbps over 1485ft for both POE or NON-POE devices. It’s ideal for the CCTV system in elevator cart. | 【INDUSTRIAL DESIGN WITH BUILT-IN HEAT SINK】Industrial design, with built-in heat sink, ensure super reliability and hassle free transmission. Indoor use ONLY. Plug-and-play, configuration free, makes installation simplest. Small design (3.1"x2.0"x0.9") and light weight. | 【POINT TO POINT CONNECTION ONLY】Act as MoCA (Multimedia over Coax) in point-to-point connection, transmit video/audio/data/control signal over coaxial cable, so as being used with twist pair. EOC Receiver should be powered by POE switch or POE injector while Transmitter should be connected with POE devices or NON-POE devices. | 【WORRY FREE】1 year warranty, US local technical support + Global after-hour support.

【OEM PRODUCT】OEM products is also known as NON-Branded products. It’s neutral version of the same product as branded product, but no logo on product enclosure. Both of them are manufactured by same factory, and no difference in functions. | 【USB KEYBOARD】Equipped with 3D PTZ Control and 2 joystick control buttons, this USB keyboard that can be accessed directly by the client software, iVMS Series platform software, DVR and PC-DVR, and can realize functions such as windows switching, PTZ control, picture capture, recording, etc. | 【HIGH COMPATIBILITY】It‘s compatible with the attached USB joystick via USB HID protocol, and can access third-party platform software. It provides ample programmable buttons for setting custom functions and has the advantage of a simple interface and easy operation. | 【EASY TO USE】Power Supply and Communication by USB Port Directly, and the indicators can how Keyboard’s Operation Status. | 【24/7 US LOCAL + GLOBAL TECH SUPPORT】This product comes with 1-year warranty, 24/7 Life-time US LOCAL + GLOBAL Tech Support. Free system consultant service. Just feel free to contact us here. Ready and willing to help in anytime.

GIGABIT 90W POE INJECTOR - Supports Gigabit data and max POE 90W output. Equipped with 1 Gigabit uplink port and 1 Gigabit PoE++ output port (DC 50-56V ). Power & data transmission distance up to 100m(328 ft). Two indicator LEDs (System POWER and PoE ACTIVE ) help judge the connection status. | COMPATIBLE with IEEE802.3af/at/bt - With Auto-sensing technology, this adapter delivers up to 90W to your PoE++ device, while also being backwards compatible with 802.3bt (60W), 802.3at (30W), and 802.3af (15.4W) PoE devices. | PLUG-N-PLAY - Simply plug in the Ethernet cables and power cord, no configuration is needed. | APPLICATION - Compact 90W PoE++ Injector provides safe and reliable power to wireless access points, PTZ IP cameras, and VoIP Phone, etc. (Noted: Not compatible with passive 24V devices, such as Ubiquiti access points.) | 24/7 US LOCAL + GLOBAL TECH SUPPORT - 1-year warranty and life-time 24/7 US Local + GLOBAL Technical Support. Free system consultant service. Ready and willing to help in anytime.

DC12V-48V POE SWITCH: Support DC12V-48V input and standard IEEE802.3af/at POE output with built-in voltage booster. (Noted: Only Mode B POE output is supported, if your POE Device is Mode A, pls buy 8 port POE Switch: ASIN B089LGKZQR) | 5-PORT FULL GIGABIT POE SWITCH: Provide 4 IEEE802.3af/at 30W POE ports and 1 Gigabit uplink; All ports 10/100/1000Mbps self-adaptive full duplex; Total POE budget 120W (DC24V/DC48V input) or 60W (DC12V input). | INDUSTRIAL DESIGN: Compact IP40 rugged metal enclosure; Wide working temperature (-40 ℉ to 176 ℉); Support DIN-Rail & Wall Mount | NON-STOP POE SUPPLY WITH DUAL POWER INPUT: Support 2 channel DC12V-48V redundant power inputs and auto failover, ensure high reliability networking system. Compatible with Mode B POE outputs only. | APPLICATIONS: Standard POE supply in solar power system (DC12V/DC18V/DC36V input), RV/Vehicle/Truck/Bus (DC12V input), VoIP/Access control systems (DC24V input). | WORRY FREE PURCHAE: Enjoy 2 Years Warranty and Lifetime 24hr Global + US Local Tech Support; 30 Days Money Back Guarantee.

【DC12V/DC24V/POE 24V Output】Supply hot switchable DC12V or DC24V power to non-POE device; When used with POE 24V adapter (included in package), it can provide POE 24V for 24V POE Device, such as Wireless AP/Bridge. (Noted: only one output at a time) | 【Gigabit Speed】 Supports 10/100/1000Mbps transmission speed. Max 328ft (100 meters) transmission. | 【Two DC Terminals】Provides both DC connector and Green terminal (one DC output at a time), max power output is 25W. | 【Industrial Design】PoE 36V~60V input (max 30W), -40°C~75°C (-40 ℉~167 ℉) working temperature; 6KV lighting protection and level 3 ESD protection; Wall-mount bracket included; Signal and power isolation design to avoid signal interference. | 【Applications in Harsh Environment】Widely used for security cameras, wireless AP, access control devices, intercom and industrial devices

【UESD WITH TRANSMITTER FOR POE & IP OVER COAX TRANSMISSION】Ethernet & Power transmission over coaxial cable, EoC Receiver can be used as a pair with EoC Transmitter to upgrade analog system to IP surveillance system while using existing coaxial cable. 100Mbps bandwidth over 1,000 feet regular RG59 transmission, working with CCA/CCU RG59/RG6 cable. Support PoE power transmission with load capacity 11W over 1,000ft transmission, working with PoE IP camera, VoIP phone, PoE WiFi AP. | 【POINT TO POINT CONNECTION ONLY】Act as MoCA (Multimedia over Coax) in point-to-point connection, transmit video / audio / data / control signal over coax cable. | 【EASY INSTALLATION】Plug-and-play, configuration free. When being used as a pair with EoC Transmitter, EoC receiver should be powered by PoE switch or PoE injector, no additional power adapter is required in EoC transmitter side. | 【SMALL SIZE DESIGN】Including One EoC receiver, small size (3.1"x2.0"x0.9"), light weight, fit into regular back box. Supports MDI/MDIX self-adaption. | 【WORRY FREE】1 year warranty, US local technical support + Global after-hour support.

【UESD WITH RECEIVER FOR POE & IP OVER COAX TRANSMISSION】Ethernet & Power transmission over coaxial cable, EoC Transmitter can be used as a pair with EoC Receiver to upgrade analog system to IP surveillance system while using existing coaxial cable. 100 Mbps bandwidth over 1,000 feet regular RG59 transmission, working with CCA/CCU RG59/RG6 cable. Support PoE power transmission with load capacity 11W over 1,000ft transmission, working with PoE IP camera, VoIP phone, PoE WiFi AP. | 【POINT TO POINT CONNECTION ONLY】Act as MoCA (Multimedia over Coax) in point-to-point connection, transmit video / audio / data / control signal over coax cable. | 【EASY INSTALLATION】Plug-and-play, configuration free. When used as a pair with EoC Receiver, EoC receiver should be powered by PoE switch or PoE injector, no additional power adapter is required in EoC transmitter side. | 【SMALL SIZE DESIGN】Including One EoC Transmitter, small size (3.1"x2.0"x0.9"), light weight, fit into regular back box. Supports MDI/MDIX self-adaption | 【WORRY FREE】1 year warranty, US local technical support + Global after-hour support.