Lichamp 30 Pack Yellow Automotive Refinish Masking Tape, 1.4 Inch x 60 Yards x 30 rolls (1800 Total Yards)***IMPORTANT: After sticking the tape, proper pressure can effectively improve the stickiness. Masking tape should take into account the balance between the continuous stickiness and easy to tear with no residue. If you want strong adhesion when you use it, you can press along the tape properly with your hand after the tape is affixed.***Directions for Use Tape is designed for Indoor use - exposure to sun and heat may cause tape to become more difficult to remove. Make sure surfaces are thoroughly clean and dry before applying masking tape. Some surfaces, such as rubber gaskets and moldings, should be cleaned with a solvent to remove residual release agents from the manufacturing process before applying masking tape. For best adhesion, surface temperatures should range from 60°F to 90°F when tape is applied. For easier application and removal, apply long continuous strips of tape in flat, straight areas and break the tape often when going around contours or curves such as wheel arches. The objective when back masking and over-taping is to keep the tape lying flat and rolled back, away from the paint edge in order to produce the cleanest look.Specifications: Meterial: Crepe paper Color: Yellow Width: 1.4 inch Length: 60 Yards x 30 rolls (1800 Total Yards) Inner core size: 3 in. Adhesion to Steel 33 oz/in Tensile Strength 26 lbs/in Elongation at Break 9% Temperature Use Range Up to 250°F (121.1°C) for 30 mins Tape Thickness 6.3 mils (0.16 mm) Store product in the original carton under normal conditions of 70°F and 50% relative humidity.