Complete kit that includes a 1/4-20" Hex Stud | Supports loads of up to 44lbs (20kKg) | Features a hexagonal receiver that works with dozens of Convi accessories | Has a ratcheted handle that allows the user to rotate it in a complete circle to tighten or loosen in tight operating spaces

Has a ratcheted handle that allows the user to rotate it in a complete circle to tighten or loosen in tight operating spaces | Features a hexagonal receiver that works with dozens of Convi accessories | Supports loads of up to 44lbs (20kKg) | Made of a lightweight alloy with a black finish

Has a ratcheted handle that allows the user to rotate it in a complete circle to tighten or loosen in tight operating spaces | Features a hexagonal receiver that works with dozens of Convi accessories | Supports loads of up to 44lbs (20kKg) | Made of a lightweight alloy with a silver finish

Offers the ability to clamp onto a support at odd angles with stands or suction cups | Comes with a two ball joint 5/8’’ (16mm) studs, one is tapped for 3/8’’ and the other is for 1/4’ | Both ball joint studs are designed to fit into the baby sockets for Convi Clamp or Super VisBoth ball joint studs are also designed to fit into baby sockets for Convi. clamp, super viser

Made of solid brass | Baby pin at one end allows to fit into the 5/8"” receiver of Super Convi Clamp or any gear with 5/8" receiver | 1/4"-20 thread on the other end for fitting cameras to any accessories with 1/4"-20 thread | Knurled neck for maximum friction

5/8" (16mm) socket inside | Collar rotates 360 degrees | Country of Origin:China | Package weight:1.0 lb

U-shaped steel design with black coating | Allows mounting of foamcore boards to a grip head | Comes with two chrome plated steel studs to connect with a grip head | For foamcore with a 1" (2.54cm) thickness

Designed to be mounted in the head of a grip head or grip arm | 5" (12.7cm) steel baby 5/8" (16mm) pin | Knurled Recess machined in the pin gives better grip and prevents light fixtures and accessories from slipping | 1/4"-20, 3/8"-16 Female Threads. The head of the pin is tapped with a 1/4"-20 thread and the collar or tail end of the pin is tapped with a 3/8"-16 thread

Consists of a pair of rotating aluminum discs attached to a 5/8" (16 mm) receiver | Four different sized V shaped jaws to accept any accessory with a 5/8", 1/2", 3/8", 1/4" mounting stud or tubing | Designed to fit the Super Convi Clamp and Super Viser Clamp systems

Double-sided hex stud designed for the Convi Clamp System | 3/8"-16 male and 1/4" male | Solid brass

Refillable 13.2lb (6kg) capacity sandbag | Extra rivets, double stitching, interior bias binding for maximum strength | Double handles on both top and bottom for more comfort. Hook and loop closure to support contents staying inside the bag

Refillable 22.4lb (10.2kg) capacity sandbag | Extra rivets, double stitching, interior bias binding for maximum strength | Double handles on both top and bottom for more comfort. Hook and loop closure to support contents staying inside the bag | 22.4 lbs

Allows junior stud lighting fixtures to be mounted on a baby stand or stud | Welded junior receiver 1-1/8"(28mm) and baby receiver 5/8"(16mm) | V shape design for positive lock | Constructed with solid steel | Chrome plating

Includes standard 5/8" stud with 3/8"-16 thread and comes with 3/8"-16 female to 1/4"-20 male adapter | Lightweight at only 1.7lb (0.8Kg) and supports up to 3.3lb (1.5Kg) | Perfect for low angel shots or for a backlight

Adjustable arm allows positioning a camera lighting fixture or accessory within seconds | Supports loads of up to 8.8 lbs (4 Kg) | Joints loosen and tighten simultaneously with a single handle | Six milled flat surfaces for secure mounting

Adjustable arm allows positioning a camera lighting fixture or accessory within seconds | Supports loads of up to 8.8 lbs (4 Kg) | Large rubberized hand wheel allows joins to lock at same time for precise positioning | Six milled flat surfaces for secure mounting

Secure cables on round tubing | Helps to run cables neatly and quickly | Accommodates tubes 1.0 - 1.4" (25-35mm) in diameter | Pack of 4

Secure cables on round tubing | Helps to run cables neatly and quickly | Accommodates tubes 1.6-2.0" (40-50mm) in diameter | Pack of 4

Quickly converts a painter's pole into a hand held boom. | Black anodized aluminum construction | 3/4"-5 female thread common with painter's poles | Removable 1/4"-20 male screw. | Includes a baby 5/8" pin with 1/4"-20 male thread

Designed to work currently with 4 different Kupo top mounts. | The hexagonal shaped receiver securely engages Kupo Quick Release Adapter Male top mounts providing easy connection of accessories that go around your camera set-ups. | Quickly change your connections by pushing the red release collar down. | Works great in combination with Kupo Vision Arm. | Can easily provide a quick release mount when attached to arms brackets or tripods.

Non-electrically conductive nylon E27 thread. | Nylon base expands to junior 1/8" size above threads. | Baby 5/8" aluminum pin on top.

Loading weight is up to 220lbs (100kg) | Fits tubes 48mm-51mm | Equipped with a 5/8in (16mm) baby pin for lightweight luminaires | The thread is captive for preventing the wing nut from falling off | Constructed from high tensile aluminum extrusion

Product Type :Camera Other Accessories | Package Dimensions :29.464 Cm L X19.304 Cm W X0.762 Cm H | Country Of Origin :China | Package Weight :1.0lbs

Designed for mounting Arri standard rosette-style accessories | A great mouting solution that fits tube sizes from 13mm-35mm or a flat object from 5mm-20mm | Allows for 360 degree rotation | Features extra 3/8in-16 female thread on the super claw | Clamp is made of aluminum alloy

Mini extension arm with a hexagonal stud on one side and a baby 5/8" (16mm) receiver on the other | Aluminum construction with steel ball clamps | Designed for the Convi and Super Viser clamps | Country of Origin: CHINA

Universal Adapter Spigot | 5/8" (16mm) Stud 3/8"-16M and 1/4"-20M Threads | Solid brass | Country of Origin:China

Can support up to 75lbs. | Feartures one 55mm dia. solid ball head and tightening knob to allow locking the camera's position quickly | The base is made of 3/8in thick aluminum cheese plate measuring 8in x 8in | The cheese plate comes with the industrial standard 3/8in holes, spaced every 1in | The top mounting plate comes with a 3/8in (10mm) slot 3.9in (100mm) in length allowing it to use a standard Arri Sliding Base

Fits M12, M10 & M8 Hex. Bolts | 3 x Hex Bolt, 2 x Wingnut, 2 x Setscrews, 1 x Key Chain, 1 x Bottle Opener, 1 x Flat Screw Driver | A must for every grip bag. Multiple uses for rigging professionals. Spring hook attaches easily to belt | Carbon Steel | Palm size, extremely lightweight, easy to carry and store