【 Function】You can mount your Nikon Nikkor AI AIS AF AF-I AF-S mount lens to Sony Alpha E-mount mirrorless cameras; | 【 Material】All-metal design; hardened anodized aluminum construction,matting varnish inside to avoid light reflection; | 【 Features】Supports manual control, manual focus, manual exposure and focus to infinity; | 【 Verify Your Lens and Camera Mount】You can find your lens/camera mount in the len's/ camera's original user manual. Or find your lens/camera on the manufacturers' website and under the product specifications look for “mount type” | 【 Cameras Compatibility】Comaptible with Sony Alpha E-mount Cameras: Sony Alpha α7, α7R, α7S, α7 II, α7R II, α7S II Sony Alpha α3000, α5000, α6000, α6300, α6500,α3500, α5100, αQX1, PXW-FS7 Sony NEX-3, NEX-5, NEX-C3, NEX-5N, NEX-7, NEX-F3, NEX-5R, NEX-5T ,NEX-6, NEX-F3, NEX-3N Sony NEX-VG10, NEX-VG20, NEX-VG30, NEX-VG900, NEX-FS100, NEX-FS700, NEX-EA50 etc

Smooth surface for effortless mount, Made of copper. | This adapter compatible with Nikon F/AF AI AI-S Lens to Nikon Z6 Z7 mount camera body. | Full manual operation, manual focus, infinity focus allowed. | Red dot identification, precise alignment, easy to install and disassemble. | If your camera indicated "lens is not properly installed", please modify the camera menu settings. Usually called the release the shutter the lens is not installed", you can modify the settings to allow. Specifically refer to the camera manual.

This adapter makes all Pentax K & PK mount lenses can be used on Micro 4/3 SYSTEM cameras. | Pentax K PK Lens to Micro 4/3 M4/3 camera. | Compatible Cameras (Including, but not limited to): Compatible for Olympus PEN E-P1, E-P2, E-P3, E-P5, E-PL1/s, E-PL2, E-PL3, E-PL5, E-PL6, E-PL7, E-PL8, E-PM1, E-PM2, PEN-F, Air A01, OM-D E-M1/II/X, E-M5/II, E-M10/II/III, Lumix DMC-G1, G2, G3, G5, G6, G7, G9, G10, Lumix DMC-GF1, GF2, GF3, GF5, GF6, GF7, GF9, G80/85, G90/G95, DMC-GH1, GH2, GH3, GH4, GH5/S, DMC-GM1, GM5; DMC-GX1, GX7, GX800/850, GX8, GX80/85, GX9,AG-AF100/104 Mirrorless Digital Cameras. | There are no electrical contacts in the adapter ring, exposure and focus has to be adjusted manually. | Please note: Infinity focus position：the position of the infinity mark 【∞】of the telephoto lens or super telephoto lens is shifted slightly to the positive side to enable focus adjustment even when focus shift is caused due to temperature changes.The shift range is denoted by an L-shaped line, Be sure to check the focus through the viewfinder even when you shoot at infinity.

This adapter allows you to use Minolta MD MC Lens to NEX E-Mount Camera. | Smooth surface for effortless mount,Infinity focus allowed. | Quality: Copper; Brand Name: K&F Concept | Compatible Cameras (Including, but not limited to):Compatible with Sony NEX-3 NEX-3C NEX-5 NEX-5C NEX-5N NEX-5R NEX-6 NEX-7 NEX-F3 | Smooth surface for effortless mount, fine made to be light weight and strong. Or effortless mount, fine made to be light weight and strong.

Allows Contax Yashica C/Y Lens to fit on EF mount camera body. | There are no electrical contacts in this adapter ring,exposure and focus has to be adjusted manually. | Smooth surface for effortless mount, fine made to be light weight and strong. | Made of brass and aluminum (not plastic), with precise design and high technology. | Please note: Infinity focus position：the position of the infinity mark 【∞】of the telephoto lens or super telephoto lens is shifted slightly to the positive side to enable focus adjustment even when focus shift is caused due to temperature changes.The shift range is denoted by an L-shaped line, Be sure to check the focus through the viewfinder even when you shoot at infinity.

【Manual Focus】 No electronic contacts. Don't support auto focus or aperture control. With the manual adapter, aperture of your lens will be defaulted the maximum. | 【Lens Mount】 Compatible with Canon EF/EF-S (EOS) lens. (Different from Canon FD FL lens) | 【Camera Mount】 Designed for L mount cameras, includeLeica T (Typ 701), SL (Typ 601), CL, TL, TL2, SL, SL2, SL2-S cameras; Panasonic Lumix S1 S1R S1H S5 cameras; Sigma fp fp Lcameras, etc. | 【First Use】 Enable the setting of your camera as "release shutter without lens" when first use with a manual adapter, otherwise the camera will not recognize your lens and cannot take pictures. | 【Pre-purchase Verification】 Please ensure your lens mount and camera mount before purchase in case of unnecessary returning. We are here for help if you have any question about adapters.

【 MANUAL ADAPTER 】This is Manual adapters without electronic contacts, which therefore don't support auto-focus or aperture control. You need to manually adjust focus and exposure settings; infinity focus allowed. | 【Unique Design】The appearance of the 4th generation lens mount adopts a twill knurled design, and the key points are treated with non-slip, making it easier and more comfortable to hold. On the other hand, the fine carving of CNC machining enhances the texture. | 【Camera Mount】 Compatible for Sony E-Mount mount cameras, include Sony Alpha α7 I / II / III, α7R I / II / III / IV, α7S I / II / III, α9 I / II, α1, Smartshot QX1, QX10, QX30, QX100, NXCAM NEX-EA50, NEX-FS100, NEX-FS700, NEX-FS700R cameras etc. | 【 Material】High-quality copper and aluminum alloy ;High precision and durable, Install and remove smoothly; Matting varnish inside to avoid light reflection; | 【Pre-purchase Verification】 Please ensure your lens mount and camera mount before purchase in case of unnecessary returning. We are here for help if you have any question about adapters.

【Manual Focus】 No electronic contacts. Don't support auto focus or aperture control. With the manual adapter, aperture of your lens will be defaulted the maximum. | 【Lens Mount】 Compatible with Exakta screw mount lens. | 【Camera Mount】 Compatible for NIK Z mount cameras, include Nikon Z 7, Z 7II, Z 6, Z 6II, Z 5, Z 50 cameras etc. | 【First Use】 Enable the setting of your camera as "release shutter without lens" when first use with a manual adapter, otherwise the camera will not recognize your lens and cannot take pictures. | 【Pre-purchase Verification】 Please ensure your lens mount and camera mount before purchase in case of unnecessary returning. We are here for help if you have any question about adapters.

Made of brass and aluminum (not plastic), anodized aluminum construction. | Smooth surface for effortless mount,infinity focus allowed, diaphragm control of the lens is set manually. | Please note: It is not same between Canon FD mount and EF mount, this fd to nex adapter ring is only for Canon FD mount lens, please contact us if you want to purchase for Canon EF mount lens. | Compatible Cameras (Including, but not limited to): Compatible with Sony NEX-3 NEX-3C NEX-3N NEX-5 NEX-5C NEX-5N NEX-5R NEX5T NEX6 NEX7 NEX-F3 a6000 a5000 a3500 a3000 Alpha A7 A7R NEX-VG10 VG20 etc NOTE: This adapter will NOT fit on the Sony a7S, a7 II, a7S II, and a7R II. | Please note: Infinity focus position：the position of the infinity mark 【∞】of the telephoto lens or super telephoto lens is shifted slightly to the positive side to enable focus adjustment even when focus shift is caused due to temperature changes.The shift range is denoted by an L-shaped line, Be sure to check the focus through the viewfinder even when you shoot at infinity.

【Manual Focus】 No electronic contacts. Don't support auto focus or aperture control. With the manual adapter, aperture of your lens will be defaulted the maximum. | 【Lens Mount】 Compatible with Canon FD FL lens. (Different from Canon EF EOS lens) | 【Camera Mount】 Designed for L mount cameras, include Leica SL SL2 T TL TL2 CL cameras; Panasonic Lumix S1 S1R S1H cameras; Sigma FP cameras, etc. | 【First Use】 Enable the setting of your camera as "release shutter without lens" when first use with a manual adapter, otherwise the camera will not recognize your lens and cannot take pictures. | 【Pre-purchase Verification】 Please ensure your lens mount and camera mount before purchase in case of unnecessary returning. We are here for help if you have any question about adapters.

【Manual Focus】 No electronic contacts. Diaphragm control of the lens is set manually. Supports manual control, manual focus, manual exposure and focus to infinity; | 【Unique Design】The appearance of the 4th generation lens mount adopts a twill knurled design, and the key points are treated with non-slip, making it easier and more comfortable to hold. On the other hand, the fine carving of CNC machining enhances the texture. | 【Camera Mount】 Compatible for Sony E-Mount mount cameras, include Sony Alpha α3000, α3500, α5000, α5100, α6000, m α6100, α6300, α6400, α6500, α6600, Sony Alpha NEX-3, NEX-C3, NEX-F3, NEX-3N, NEX-5, NEX-5N, NEX-5R, NEX-5T, NEX-6, NEX-7, Sony XDCAM FS5, FS5 II, FS7, FS7 II cameras etc. | 【 Material】High-quality copper and aluminum alloy ;High precision and durable, Install and remove smoothly; Matting varnish inside to avoid light reflection; | 【Pre-purchase Verification】 Please ensure your lens mount and camera mount before purchase in case of unnecessary returning. We are here for help if you have any question about adapters.

Smooth surface for effortless mount, Made of copper. | This adapter allows you to use Canon EF mount lens to Nikon Z6 Z7 mount camera body. | Full manual operation, manual focus, infinity focus allowed. | Red dot identification, precise alignment, easy to install and disassemble. | If your camera indicated "lens is not properly installed", please modify the camera menu settings. Usually called the release the shutter the lens is not installed", you can modify the settings to allow. Specifically refer to the camera manual.

Smooth surface for effortless mount, Made of copper. | This adapter allows you to use Contax Zeiss C/Y lens to Nikon Z6 Z7 mount camera body. | Full manual operation, manual focus, infinity focus allowed. | Red dot identification, precise alignment, easy to install and disassemble. | If your camera indicated "lens is not properly installed", please modify the camera menu settings. Usually called the release the shutter the lens is not installed", you can modify the settings to allow. Specifically refer to the camera manual.

【Function】 With this adapter, you can use EOS EF / EFS Lens on a Fuji FX Mount Camera body, such as X-Pro1 X-E1 X-E2 X-A1 X-M1 X-T1. | 【Features】 Supports manual control, manual focus, manual exposure and focus to infinity; Red dot mark, high precision, easy to install and remove; | 【Material】 All-metal design; hardened anodized aluminum construction,matting varnish inside to avoid light reflection; | 【Cameras Compatibility】 Compatible with Fuji FX Mount Camera X-Pro1 X-E1 X-E2 X-A1 X-M1 X-T1. | 【Note】 When using the adapter ring for the first time, please turn on the option "Release the shutter without lens" in the fuselage menu, otherwise the lens will not be recognized and the shutter cannot be taken to take pictures.

Smooth surface for effortless mount, Made of copper. | This adapter allows you to use FD mount lens to Nikon Z6 Z7 Z mount camera body. | Full manual operation, manual focus, infinity focus allowed. | Red dot identification, precise alignment, easy to install and disassemble. | If your camera indicated "lens is not properly installed", please modify the camera menu settings. Usually called the release the shutter the lens is not installed", you can modify the settings to allow. Specifically refer to the camera manual.

【Function】You can mount Leica M LM Mount Lenses to Fujifilm X-series mirrorless cameras. | 【Material】All-metal design; hardened anodized aluminum construction,matting varnish inside to avoid light reflection. | 【Features】Manual adapter,auto diaphragm/auto-focus is not allowed; Infinity focus function is allowed. | 【Cameras Compatibility】Designed for Fujifilm Fuji X-Series Mirrorless Camera Body: X-Pro1, X-Pro2, X-T1, X-T2, X-T10, X-T20, X-E1, X-E2, X-E2S, X-A1, X-A2, X-A3, X-A10, X-M1 etc. | 【Verify Your Lens and Camera Mount】You can find your lens/camera mount in the len's/ camera's original user manual. Or find your lens/camera on the manufacturers' website and under the product specifications look for “mount type”.

Quality copper aluminum alloy precision manufacturing, ring with the camera bayonet close and smooth, the fine copper bayonet will not wear the lens, durable. | Lens interface with fine copper material, higher precision, easy to wear, durable. | Red dot mark, accurate alignment, convenient installation and disassembly. | Full manual control, manual focusing, aperture priority, infinity focus. | Please note: when using the adapter ring for the first time, please turn on the “release shutter w/o lens”option in the menu, otherwise the adapter lens will not be recognized.

Smooth surface for effortless mount, Made of copper. | This adapter allows you to use M42 lens to to Nikon Z6 Z7 mount camera body. | Full manual operation, manual focus, infinity focus allowed. | Red dot identification, precise alignment, easy to install and disassemble. | If your camera indicated "lens is not properly installed", please modify the camera menu settings. Usually called the release the shutter the lens is not installed", you can modify the settings to allow. Specifically refer to the camera manual.

Quality copper aluminum alloy precision manufacturing, ring with the camera bayonet close and smooth, the fine copper bayonet will not wear the lens, durable. | Lens interface with fine copper material, higher precision, easy to wear, durable. | Red dot mark, accurate alignment, convenient installation and disassembly. | Full manual control, manual focusing, aperture priority, infinity focus. | Please note: when using the adapter ring for the first time, please turn on the “release shutter w/o lens”option in the menu, otherwise the adapter lens will not be recognized.

Smooth surface for effortless mount, Made of copper. | This adapter fits Minolta/Sony AF A mount lens to Nikon Z6 Z7 mount camera body. | Full manual operation, manual focus, infinity focus allowed. | Red dot identification, precise alignment, easy to install and disassemble. | If your camera indicated "lens is not properly installed", please modify the camera menu settings. Usually called the release the shutter the lens is not installed", you can modify the settings to allow. Specifically refer to the camera manual.

Quality copper aluminum alloy precision manufacturing, ring with the camera bayonet close and smooth, the fine copper bayonet will not wear the lens, durable. | Lens interface with fine copper material, higher precision, easy to wear, durable. | Red dot mark, accurate alignment, convenient installation and disassembly. | Full manual control, manual focusing, aperture priority, infinity focus. | Please note: when using the adapter ring for the first time, please turn on the “release shutter w/o lens”option in the menu, otherwise the adapter lens will not be recognized.

Smooth surface for effortless mount, Made of copper. | This adapter fits Minolta MD MC Lens to Nikon Z6 Z7 mount camera body | Full manual operation, manual focus, infinity focus allowed. | Red dot identification, precise alignment, easy to install and disassemble. | If your camera indicated "lens is not properly installed", please modify the camera menu settings. Usually called the release the shutter the lens is not installed", you can modify the settings to allow. Specifically refer to the camera manual.

【Function】You can Mounts Nikon Nikkor F/AI Mount Lenses to Fujifilm X-series mirrorless cameras; | 【Material】 All-metal design; hardened anodized aluminum construction,matting varnish inside to avoid light reflection; | 【Features】 Supports manual control, manual focus, manual exposure and focus to infinity; Red dot mark, high precision, easy to install and remove; | 【Cameras Compatibility】Designed for Fujifilm Fuji X-Series Mirrorless Camera Body: X-Pro1, X-Pro2, X-T1, X-T2, X-T10, X-T20, X-E1, X-E2, X-E2S, X-A1, X-A2, X-A3, X-A10, X-M1 etc ; | 【Verify Your Lens and Camera Mount】You can find your lens/camera mount in the len's/ camera's original user manual. Or find your lens/camera on the manufacturers' website and under the product specifications look for “mount type”.

The adapters are precision made to insure the perfect fit. | Made of brass and aluminum(not plastic),high quality and compact. | High quality provides great protection and shock absorption for your lenses, water-resistant. | Please note: Infinity focus position：the position of the infinity mark 【∞】of the telephoto lens or super telephoto lens is shifted slightly to the positive side to enable focus adjustment even when focus shift is caused due to temperature changes.The shift range is denoted by an L-shaped line, Be sure to check the focus through the viewfinder even when you shoot at infinity.

Smooth surface for effortless mount, Made of copper. | This adapter allows you to use Olympus OM lens to Nikon Z6 Z7 mount camera body. | Full manual operation, manual focus, infinity focus allowed. | Red dot identification, precise alignment, easy to install and disassemble. | If your camera indicated "lens is not properly installed", please modify the camera menu settings. Usually called the release the shutter the lens is not installed", you can modify the settings to allow. Specifically refer to the camera manual.

Smooth surface for effortless mount, Made of copper. | This adapter allows you to use Pentax PK lens to Nikon Z6 Z7 mount camera body. | Full manual operation, manual focus, infinity focus allowed. | Red dot identification, precise alignment, easy to install and disassemble. | If your camera indicated "lens is not properly installed", please modify the camera menu settings. Usually called the release the shutter the lens is not installed", you can modify the settings to allow. Specifically refer to the camera manual.

【Manual Focus】 No electronic contacts. Don't support auto focus or aperture control. With the manual adapter, aperture of your lens will be defaulted the maximum. | 【Lens Mount】 Compatible with Konica AR screw mount lens. | 【Camera Mount】 Designed for L mount cameras, include Leica SL SL2 T TL TL2 CL cameras; Panasonic Lumix S1 S1R S1H cameras; Sigma FP cameras, etc. | 【First Use】 Enable the setting of your camera as "release shutter without lens" when first use with a manual adapter, otherwise the camera will not recognize your lens and cannot take pictures. | 【Pre-purchase Verification】 Please ensure your lens mount and camera mount before purchase in case of unnecessary returning. We are here for help if you have any question about adapters.

【Manual Focus】 No electronic contacts. Don't support auto focus or aperture control. With the manual adapter, aperture of your lens will be defaulted the maximum. | 【Lens Mount】 Compatible with Konica Auto-Reflex (AR) screw mount lens. | 【Camera Mount】 Compatible for NIK Z mount cameras, include Nikon Z 7, Z 7II, Z 6, Z 6II, Z 5, Z 50 cameras etc. | 【First Use】 Enable the setting of your camera as "release shutter without lens" when first use with a manual adapter, otherwise the camera will not recognize your lens and cannot take pictures. | 【Pre-purchase Verification】 Please ensure your lens mount and camera mount before purchase in case of unnecessary returning. We are here for help if you have any question about adapters.

【Manual Focus】 No electronic contacts. Don't support auto focus or aperture control. With the manual adapter, aperture of your lens will be defaulted the maximum. | 【Lens Mount】 Compatible with Leica R screw mount lens. | 【Camera Mount】 Compatible for NIK Z mount cameras, include Nikon Z 7, Z 7II, Z 6, Z 6II, Z 5, Z 50 cameras etc. | 【First Use】 Enable the setting of your camera as "release shutter without lens" when first use with a manual adapter, otherwise the camera will not recognize your lens and cannot take pictures. | 【Pre-purchase Verification】 Please ensure your lens mount and camera mount before purchase in case of unnecessary returning. We are here for help if you have any question about adapters.

【Manual Focus】 No electronic contacts. Don't support auto focus or aperture control. With the manual adapter, aperture of your lens will be defaulted the maximum. | 【Lens Mount】 Compatible with Leica M39 screw mount lens. | 【Camera Mount】 Designed for L mount cameras, include Leica SL SL2 T TL TL2 CL cameras; Panasonic Lumix S1 S1R S1H cameras; Sigma FP cameras, etc. | 【First Use】 Enable the setting of your camera as "release shutter without lens" when first use with a manual adapter, otherwise the camera will not recognize your lens and cannot take pictures. | 【Pre-purchase Verification】 Please ensure your lens mount and camera mount before purchase in case of unnecessary returning. We are here for help if you have any question about adapters.

【Manual Focus】 No electronic contacts. Don't support auto focus or aperture control. With the manual adapter, aperture of your lens will be defaulted the maximum. | 【Lens Mount】 Compatible with M42 screw mount lens. | 【Camera Mount】 Designed for L mount cameras, include Leica SL SL2 T TL TL2 CL cameras; Panasonic Lumix S1 S1R S1H cameras; Sigma FP cameras, etc. 【First Use】 Enable the se | 【First Use】 Enable the setting of your camera as "release shutter without lens" when first use with a manual adapter, otherwise the camera will not recognize your lens and cannot take pictures. | 【Pre-purchase Verification】 Please ensure your lens mount and camera mount before purchase in case of unnecessary returning. We are here for help if you have any question about adapters.

【Manual Focus】 No electronic contacts. Diaphragm control of the lens is set manually. Supports manual control, manual focus, manual exposure and focus to infinity; | 【Unique Design】The appearance of the 4th generation lens mount adopts a twill knurled design, and the key points are treated with non-slip, making it easier and more comfortable to hold. On the other hand, the fine carving of CNC machining enhances the texture. | 【Camera Mount】 Compatible for Sony E-Mount mount cameras, include Sony Alpha α7 I / II / III, α7R I / II / III / IV, α7S I / II / III, α9 I / II, α1, Sony Alpha α3000, α3500, α5000,Alpha NEX-3, NEX-C3, NEX-F3, NEX-3N, NEX-5, NEX-5N, NEX-5R, NEX-5T, NEX-6, NEX-7,Sony Smartshot QX1, QX10 cameras etc. | 【 Material】High-quality copper and aluminum alloy ;High precision and durable, Install and remove smoothly; Matting varnish inside to avoid light reflection; | 【Pre-purchase Verification】 Please ensure your lens mount and camera mount before purchase in case of unnecessary returning. We are here for help if you have any question about adapters.

【Manual Focus】 No electronic contacts. Don't support auto focus or aperture control. With the manual adapter, aperture of your lens will be defaulted the maximum. | 【Lens Mount】 Compatible with Sony A （MAF） screw mount lens. | 【Camera Mount】 Designed for L mount cameras, include Leica SL SL2 T TL TL2 CL cameras; Panasonic Lumix S1 S1R S1H cameras; Sigma FP cameras, etc. | 【First Use】 Enable the setting of your camera as "release shutter without lens" when first use with a manual adapter, otherwise the camera will not recognize your lens and cannot take pictures. | 【Pre-purchase Verification】 Please ensure your lens mount and camera mount before purchase in case of unnecessary returning. We are here for help if you have any question about adapters.

MANUAL ADAPTER: This is Manual adapters without electronic contacts, which therefore don't support auto-focus or aperture control. You need to manually adjust focus and exposure settings | Smooth surface for effortless mount,infinity focus allowed; Made of brass and aluminum (not plastic), anodized aluminum construction.Diaphragm control of the lens is set manually. | Compatible Cameras (Including, but not limited to): Sony NEX-3 NEX-3C NEX-3N NEX-5 NEX-5C NEX-5N NEX-5R NEX5T NEX6 NEX7 NEX-F3 a6000 a5000 a3500 a3000 Alpha A7 A7R NEX-VG10 VG20 etc NOTE: This adapter will NOT fit on the Sony a7S, a7 II, a7S II, and a7R II. | Please note: Infinity focus position：the position of the infinity mark 【∞】of the telephoto lens or super telephoto lens is shifted slightly to the positive side to enable focus adjustment even when focus shift is caused due to temperature changes.The shift range is denoted by an L-shaped line, Be sure to check the focus through the viewfinder even when you shoot at infinity. | As Canon's EOS lenses are electronically controlled，most Canon EF mount lenses do not feature a manual aperture ring，so when used on our canon to sony adapter, which is a full manual operation adapter ring, the aperture could not be transfered to the camera, it will stop down to its smallest f/stop by default.

【Manual Focus】 No electronic contacts. Don't support auto focus or aperture control. With the manual adapter, aperture of your lens will be defaulted the maximum | 【Lens Mount】 Compatible with Minolta MD lens. | 【Camera Mount】 Designed for L mount cameras, include Leica SL SL2 T TL TL2 CL cameras; Panasonic Lumix S1 S1R S1H cameras; Sigma FP cameras, etc. | 【First Use】 Enable the setting of your camera as "release shutter without lens" when first use with a manual adapter, otherwise the camera will not recognize your lens and cannot take pictures. | 【Pre-purchase Verification】 Please ensure your lens mount and camera mount before purchase in case of unnecessary returning. We are here for help if you have any question about adapters.

【Manual Focus】 No electronic contacts. Diaphragm control of the lens is set manually. Supports manual control, manual focus, manual exposure and focus to infinity; | 【Unique Design】The appearance of the 4th generation lens mount adopts a twill knurled design, and the key points are treated with non-slip, making it easier and more comfortable to hold. On the other hand, the fine carving of CNC machining enhances the texture. | 【Camera Mount】 Compatible for Sony E-Mount mount cameras, include Sony Alpha α7 I / II / III, α7R I / II / III / IV, α7S I , α5100, α6000, m α6100, α6300, α6400, α6500, α6600, Sony Alpha NEX-3, NEX-C3, NEX-F3, NEX-3N, NEX-5, NEX-5N, NEX-5R, NEX-5T, NEX-6, NEX-7, Sony XDCAM FS5, FS5 II, FS7, FS7 II cameras etc. | 【 Material】High-quality copper and aluminum alloy ;High precision and durable, Install and remove smoothly; Matting varnish inside to avoid light reflection; | 【Pre-purchase Verification】 Please ensure your lens mount and camera mount before purchase in case of unnecessary returning. We are here for help if you have any question about adapters.

【Manual Focus】 No electronic contacts. Don't support auto focus or aperture control. With the manual adapter, aperture of your lens will be defaulted the maximum. | 【Lens Mount】 Compatible with Nikon F (G-Type) screw mount lens. | 【Camera Mount】 Designed for L mount cameras, include Leica SL SL2 T TL TL2 CL cameras; Panasonic Lumix S1 S1R S1H cameras; Sigma FP cameras, etc. | 【First Use】 Enable the setting of your camera as "release shutter without lens" when first use with a manual adapter, otherwise the camera will not recognize your lens and cannot take pictures. | 【Pre-purchase Verification】 Please ensure your lens mount and camera mount before purchase in case of unnecessary returning. We are here for help if you have any question about adapters.

【Manual Focus】 No electronic contacts. Diaphragm control of the lens is set manually. Supports manual control, manual focus, manual exposure and focus to infinity; | 【Unique Design】The appearance of the 4th generation lens mount adopts a twill knurled design, and the key points are treated with non-slip, making it easier and more comfortable to hold. On the other hand, the fine carving of CNC machining enhances the texture. | 【Camera Mount】 Compatible for Sony E-Mount mount cameras, include Sony Alpha α3000, α3500, α5000, α5100, α6000, m α6100, α6300, α6400, α6500, α6600, Sony Alpha NEX-3, NEX-C3, NEX-F3, NEX-3N, NEX-5, NEX-5N, NEX-5R, NEX-5T, NEX-6, NEX-7, Sony XDCAM FS5, FS5 II, FS7, FS7 II cameras etc. | 【 Material】High-quality copper and aluminum alloy ;High precision and durable, Install and remove smoothly; Matting varnish inside to avoid light reflection; | 【Pre-purchase Verification】 Please ensure your lens mount and camera mount before purchase in case of unnecessary returning. We are here for help if you have any question about adapters.

【Manual Focus】 No electronic contacts. Don't support auto focus or aperture control. With the manual adapter, aperture of your lens will be defaulted the maximum. | 【Lens Mount】 Compatible with Nikon F mount lens. | 【Camera Mount】 Designed for L mount cameras, include Leica SL SL2 T TL TL2 CL cameras; Panasonic Lumix S1 S1R S1H cameras; Sigma FP cameras, etc. | 【First Use】 Enable the setting of your camera as "release shutter without lens" when first use with a manual adapter, otherwise the camera will not recognize your lens and cannot take pictures. | 【Pre-purchase Verification】 Please ensure your lens mount and camera mount before purchase in case of unnecessary returning. We are here for help if you have any question about adapters.

【Manual Focus】 No electronic contacts. Diaphragm control of the lens is set manually. Supports manual control, manual focus, manual exposure and focus to infinity; | 【Unique Design】The appearance of the 4th generation lens mount adopts a twill knurled design, and the key points are treated with non-slip, making it easier and more comfortable to hold. On the other hand, the fine carving of CNC machining enhances the texture. | 【Camera Mount】 Compatible for Sony E-Mount mount cameras, include Sony Alpha α7 I / II / III, α7R I / II / III / IV, NEX-5, NEX-5N, NEX-5R, NEX-5T, NEX-6, NEX-7, Sony Handicam NEX-VG10, NEX-VG20, NEX-VG30, NEX-VG900 cameras etc. | 【 Material】High-quality copper and aluminum alloy ;High precision and durable, Install and remove smoothly; Matting varnish inside to avoid light reflection; | 【Pre-purchase Verification】 Please ensure your lens mount and camera mount before purchase in case of unnecessary returning. We are here for help if you have any question about adapters.