【Designed for M.2 SSD】The NVME Heat Sink is specially designed for M.2 2280 SSD, which is very suitable for Laptop, Desktop Computers/PS5, etc. | 【10-30°C Cooling Effect】Pure Copper coverd by Graphite, Copper(401 W/mK) has better heat dissipation than aluminum alloy(237W/mk), and the groove design greatly increase the heat dissipation area, with 10°C - 30°C cooling effect (Varies depending on the environments), cool your M.2 SSD to a safe temp to avoid overheating and throttling, improving the performance of your computer. | 【Comes with Thermal Pad, Rubber Rings and bandages】thermal pad is made from Silicon Grease Material, with good thermal conductivity ability. Soft enough and good ductility, compatible with uneven surfaces of the M.2 SSD. Low viscosity, with no damage to the SSD warranty label. The bandages can bear high temperature. | 【Noted】Please choose 2mm for Laptop heatsink, 4mm for Desktop Computer Heatsink, please check the space for heatsink before purchase; the copper heatsink covered with graphite, so the heatskink looks black,It is normal if expose a little red copper | 【Package include】1PCS 70*20*2mm heatsink, 1PCS thermal Pad, Rubber Rings and Bandages

【Designed for RTX 3090 Ti / 4070 Ti / 4080 / 4090】ATX 3.0 PCIe 5.0 12+4pin 12VHPWR 180 Degree Angled Adapter is designed for GeForce RTX 3090Ti 4070 Ti 4080 4090 GPU, This one is Type A, Please check the product picture and orientation of your GPU before purchasing | 【180 Degree 16Pin (12+4) Pin Adapter 】180 Degree Angle allows to work with your original power cable, and have a suitable extension direction, which can avoid the wear of the cable and the input port of GPU, extend the service life. and our 12VHPWR 180 Degree Adapter only protrudes 7mm from your graphics card, increases more space between your GPU and your side panel. This enables installation of super wide cards in more narrow chassis. | 【Supports UP to 600W, CNC Aluminum Shell for Heat Dissipation】The Shell of the 16 Pin adapter is made of aluminum alloy, which is more durable and has better heat heat dissipation, supports maximum power output of 600W,and please assure your power cable is 600W | 【Note】Please refer to product description as well as the chosen variant to ensure compatibility with your graphics card before purchasing.🔺 if the backplate of your GPU exceeds the port by more than 3MM. This adapter may not be compatible | 【Package Include】1PCS 16(12+4) Pin 180 Degree Adapter (Type A)

【Designed for RTX 3090 Ti / 4070 Ti / 4080 / 4090】ATX 3.0 PCIe 5.0 12+4pin 12VHPWR 90 Degree Angled Adapter is designed for GeForce RTX 3090Ti 4070 Ti 4080 4090 GPU, This one is Type A, Please check the product picture and orientation of your GPU before purchasing | 【90 Degree 12VHPWR 16Pin (12+4) Pin Adapter 】90 Degree Angle allows to work with your original power cable, and have a suitable extension direction, which can avoid the wear of the cable and the input port of GPU, extend the service life. and our 12VHPWR 90 Degree Adapter only produces 11mm from your graphics card, increases more space between your GPU and your side panel. This enables installation of super wide cards in more narrow chassis. | 【Supports UP to 600W, 12oz copper for Heat Dissipation】the adapter Supports maximum power output of 600W,and please assure your power cable is 600W, the PCB is with 12oz copper for heatsink, to avoid overheating problem | 【Note】Please refer to product description as well as the chosen variant to ensure compatibility with your graphics card before purchasing. | 【Package Include】1PCS 16(12+4) Pin 90 Degree Adapter (Type A)

【Designed for RTX 3090 Ti / 4070 Ti / 4080 / 4090】ATX 3.0 PCIe 5.0 12+4pin 12VHPWR 90 Degree Angled Adapter is designed for GeForce RTX 3090Ti 4070 Ti 4080 4090 GPU, This one is Type B, Please check the product picture and orientation of your GPU before purchasing | 【90 Degree 12VHPWR 16Pin (12+4) Pin Adapter 】90 Degree Angle allows to work with your original power cable, and have a suitable extension direction, which can avoid the wear of the cable and the input port of GPU, extend the service life. and our 12VHPWR 90 Degree Adapter only produces 11mm from your graphics card, increases more space between your GPU and your side panel. This enables installation of super wide cards in more narrow chassis. | 【Supports UP to 600W, 12oz copper for Heat Dissipation】the adapter Supports maximum power output of 600W,and please assure your power cable is 600W, the PCB is with 12oz copper for heatsink, to avoid overheating problem | 【Note】Please refer to product description as well as the chosen variant to ensure compatibility with your graphics card before purchasing. | 【Package Include】1PCS 16(12+4) Pin 90 Degree Adapter (Type B)

Heatsink Dust Filter for PS5 Slim Fan: the filter is sepcially designed for PS5 Slim Fan Only | Metal Heatsink & Dustproof Cover for PS5 Slim Fan: The mesh cover is designed to improve the thermal performance of PS5 Slim. The PVC dust filter greatly reduces dust accumulation inside the Fan and enhances heat dissipation | Upgrade design: The edge of the mesh cover comes with strong self-adhesive on edge and centre. The design perfectly fits the PS5 Slim fan, and there is no glue reside on the fan when you remove and replace the mesh | Easy to install: just remove the clear film of dust filter and cover the filter on the fan, ensure that the middle and edges of the filter are firmly adhered to the fan | Package Included: 4 dust-proof filter for PS5 Slim Fan (diameter:110mm)

【NVMe SSD Heatsink Cover for PS5 SLIM ONLY 】PS5 Slim M.2 SSD cover with integrated heatsink is designed to fit PS5 Slim and improve the thermal performance of the SSD mounted in the expanded storage slot. The finned shape design perfectly fits into the expansion slots of the PS5 and features with design of 1.05CM thickness magnesium aluminum alloy. The better heat dissipation of SSD heatsink, the higher endurance of your PS5 SLIM M.2 SSD drives. | 【1.05MM Magnesium Aluminum Fin】Plate-fin heat exchanger design ensures the best thermal conducting efficiency and reduces heat from M.2 SSD by up to 50%. Combined with different thermal pads and magnesium aluminum fins to achieve better heat dissipation performance. | 【SSD Heatsink and Cover 2 IN 1】 Rather than creating a heatsink that would only trap the heat in the metal cover, we designed a heatsink that replaces the orginal PS5 Slim consoles cover. This allows for better cooling using the fan as well as being a larger heatsink. | 【Made of High-quality Materials】The high-quality magnesium-aluminum alloy material will have stronger heat dissipation performance than other ordinary aluminum alloy materials, which can reduce the temperature of the SSD by 10°C - 30°C (depending on the environment), which can help your PS5 Slim achieves better cooling effect. So as to bring you better gaming experience. | 【Package Include】1x SSD Heatsink for PS5 SLIM, 1x 70x20x1.6mm thermal pad, 2x 20x20x2.0mm thermal pads, 2x 20x20x1.3mm thermal pads, 1x SSD and cover screws, 1x screwdriver

Aluminum Gpu Support Bracket : The stand is made of hard anodized aluminum alloy, and Provides strength, ruggedness, and corrosion resistance, can be used as a long-term replacement. 🔺Height is from 72 to 117mm. please make sure the length works on your device before purchasing. | Adjustable graphics card support bracket: The graphics card bracket design can be compatible with various chassis and graphics card, support height is from 72 to 117mm. | GPU Support with Bottom hidden Magnet: The magnet hidden in the base is designed for easy installation and more stable standing in the chassis. | GPU Support with Non-Slip Rubber Pad: There are non-slip rubber pads on the top, which is convenient for you to install without scratching the graphics card. | Package Inlcude: a adjustable gpu support bracket.

ONLY for ROG ALLY: the 90 degree PCIe 4.0 M2 adapter is specially for ROG Ally Console, you can upgrade a 2230 size M.2 SSD drive to a 2280 size NVME M-Key 5Pin M.2 PCIE 4.0 SSD. | Higher-Speed, Higher-Capacity Storage: it can replace your small capacity 2230 SSD to larger capacity 2280 SSD, to achieve higher speed and capacity. | Installation Skills Required: it requires technical and operational skills, it is recommended to install under the guidance of professionals, especially how to clone the system, you can search the instructions on the internet . | Package include: a 2230 to 2280 SSD Adapter for Rog Ally, a screwdriver for SSD | Installation instruction: 1st .2280 SSD to be replaced into the adapter board, ready for the operation of the system cloning. 2nd. Boot rog ally into the system, connect the SSD,and open DiskGenius, Use the "System Migration"function to clone the original 512GB system disk to a new one.

[PS5 NVMe Heatsink] - The cooler is designed for PS5 internal NVMe SSD. It is made of magnalium aluminum material, adopt CNC milling and grinding process and anodic oxidation treatment, achieve a high heatsink performance. | [High performance] - 1CM thickness magnalium aluminum heatsink design, extension cover and heatsink 2 in 1, the passive design with no cooling fan is aiming for being totally silent. The heat produced by the SSD will be absorbed by aluminum block and effectively conducted to the extensive aluminum cover. Ten pieces pre-divided thermal pads and 2pcs 2280 thermal pads included for excellent heat connection. 1.0mm,1.5mm and 2mm thickness option adapts to any NVMe memory | [Fits Perfectly] - The streamlined profile is a snag fit with the ssd extension slot,high performance comes from the cooling fins and the delicate utilization of air circulation sucked by PS5 main cooling fan | [Wide Compatibility] - The cooler fits both PS5 Ultra HD and Digital editions. In terms of hardware, it’s compatible with any standard NVMe M.2 solid state drive like WD Black SN850, Samsung 980 Pro and Rocket NVMe 4.0. It supports 2230, 2242, 2260, 2280 form factor and also works with 22110 | [Package Include] - PS5 heatsink*1, 70x20x2mm thermal pad , 70x20x1mm thermal pad *1， 15x15x1.5mm thermal pad *10 SSD and heatsink Screws, Screwdriver *1

15Pin SATA Splitter 1 to 4, 1x SATA Male to 4x SATA Female Receptacles Splitter; the SATA splitter cable powers up to four Serial ATA HDD, SSD, optical drives, DVD burners, and PCI-E cards from a single connection to computer power supplies; Snug-fitting drive SATA power cable clicks into place on your power supply to provide a secure connection that prevents accidental disconnection | Standard 18AWG Tinned Copper Wire, Hdd power cables have 4-SATA 15 pin female receptacles and 1-SATA 15 pin male plug at one end; Constructed with flexible 18 AWG conductors for reliable performance when connecting four SATA hard drives to a power supply; Supports 3.3V, 5V, and 12V power voltages between SATA I, II, III drives and power supply connections without any degradation of performance | It is convenient to share a PSU connection when installing new internal components like a DVD burner; 16 inch cable harness has 4 SATA drive receptacles spaced at 4.0 inch intervals; Provides sufficient length for internal cable management to minimize airflow impact in most configurations | Product advantages, SATA adapter cable is formed at one time, no degumming, no burrs. Strong toughness and wear resistance. The interface is designed according to the standard, and it is easy to plug and unplug. Fast data transmission speed, good contact, no bad contact | Universal compatibility with computer power supplies with SATA connectors and popular SATA equipped devices such as: Apricorn Velocity Solo x2 Extreme Performance SSD Upgrade Kit, 24x DVD-RW Serial-ATA Internal OEM Optical Drive, Crucial MX100 256GB SATA 2.5-Inch Internal Solid State Drive, Inateck PCI-E to USB 3.0 5-Port PCI Express Card, Inateck Superspeed 7 Ports PCI-E to USB 3.0 Expansion Card, Inateck Superspeed 4 Ports PCI-E to USB 3.0 Expansion Card

【2242 SSD Heatsink】the heatsink is specially design for 2242 SSD | 【10-30°C Cooling Effect】the heatsink is made of full aluminum alloy(237W/mk), and the groove design greatly increase the heat dissipation area, with 10°C - 30°C cooling effect (Varies depending on the environments), cool your M.2 2242 SSD to a safe temp to avoid overheating and throttling, improving the performance of your computer | 【Comes with Thermal Pads, screw and screrdriver】thermal pad is made from Silicon Grease Material, with good thermal conductivity ability. Soft enough and good ductility, compatible with uneven surfaces of the M.2 SSD | 【Adjustable U-Shape Bracket 】the bracket is adjustable, fits single and dual side chip SSD, makes the SSD and heatsink, thermal pad closer and improve the heatsink performance | 【Package Include】1x2242 Heatsink, 2x thermal pad,1x screwdriver and screws

M.2 Thermal Pad: 4 Pack 120x20mm 15W Thermal Pads GPU 1mm 1.5mm NVME CPU SSD Thermal Pad for Laptop Heatsink CPU GPU SSD IC LED Cooler | 15W Excellent Thermal Conductivity: with upgraded thermally conductive silicone materia, the thermal conductivity is up to 15W/mK, the OwlTree thermal pads greatly improve heat transfer between electronic components and effectively cool down in seconds | Easy to Use: Size 120x20x1.0mm and 120x20x1.5mm, each 2pcs, the thermal pads can be cut freely according to your needs. 1mm,1.5mm/set can meet different needs, filling the contact surface gap perfectly, it is an excellent assistant for beginners and professionals. | Widly Application:not only with computers or laptops, but also with PS3, PS4 or PS5 as well as Xbox 360,One and Series X consoles, SSD,GPU, CPU and any materials that require filling and cooling modules. | Package include: 120*20*1mm,1.5mm thickness each 2pcs, total 4pcs. Note: the thermal pad is pink, the protective film is blue or pink

Converts standard 24 pin ATX power supply connector to 8 pin power supply connecter | Connector 1: 24 pin for ATX Power Supply | Connector 2: 8 Pin DELL motherboards H61 H81 Q77 Q87 B75 A75 Q75 Q65 | Compatible with Optiplex 3020 7020 9020 and Precision T1700 models | 30cm 1007-18AWG standard tinned copper wire, supports 1000 watts

【Designed for M.2 SSD】The NVME Heat Sink is specially designed for M.2 2280 SSD, which is very suitable for Laptop, Desktop Computers/PS5, etc. | 【10-30°C Cooling Effect】Pure Copper coverd by Graphite, Copper(401 W/mK) has better heat dissipation than aluminum alloy(237W/mk), and the groove design greatly increase the heat dissipation area, with 10°C - 30°C cooling effect (Varies depending on the environments), cool your M.2 SSD to a safe temp to avoid overheating and throttling, improving the performance of your computer. | 【Comes with Thermal Pad, Rubber Rings and bandages】thermal pad is made from Silicon Grease Material, with good thermal conductivity ability. Soft enough and good ductility, compatible with uneven surfaces of the M.2 SSD. Low viscosity, with no damage to the SSD warranty label. The bandages can bear high temperature. | 【Noted】Please choose 2mm for Laptop heatsink, 4mm for Desktop Computer Heatsink, please check the space for heatsink before purchase; the copper heatsink covered with graphite, so the heatskink looks black,It is normal if expose a little red copper | 【Package include】1PCS 70*20*4mm heatsink, 1PCS thermal Pad, Rubber Rings and Bandages

【Fit for PS5 Slim SSD with Heatsink】Most heatsinks didn't fit M.2 SSD with integrated heatsink, but this cover is made for this purpose. Combined with SSD with integrated heatsink, to improve cooling performance and prevent overheating. | 【Expansion Slot Cover for PS5 Slim】The M.2 SSD dust cover is designed to fit the PS5 Slim SSD and improve the thermal performance of SSDs installed in expansion storage slots. The better the heat dissipation of your SSD heatsink, the more durable your PS5 M.2 SSD drive will be. | 【Drop-shaped Breathable Hole Design】With the Drop-shaped hole, increase the heat dissipation area and absorb the heat generated by the M.2 SSD. Enhances the temperature conversion effect together with the PS5 internal cooling fan. | 【Comes with Dust Filter and SSD Screws】 Unique dust filter greatly reduces dust accumulation inside the SSD expansion slot and enhances heat dissipation. Screws are good replacement if you loss orignal SSD screws | 【Package Include】PS5 Slim M.2 SSD cover Black, screwdriver, SSD and Cover Screw

Heatsink Dustproof Cover Kits for PS5 M.2 SSD: the PS5 SSD cover kits is sepcially designed for PS5 SSD extension slot ONLY | Metal Heatsink & Dustproof Cover for PS5 Extension Slot: The M.2 SSD cover is designed to improve the thermal performance of SSD. The hollow holes increase the heat dissipation area and absorb the heat generated by the M.2 SSD. The PVC dust filter greatly reduces dust accumulation inside the SSD extension slot and enhances heat dissipation | Screws and Screwdriver for Cover and SSD: there is a screw for M.2 SSD, a screw for slot cover and a screwdriver, you don't need to spend extra to buy them when missing accidentally, save a lot !!! | Thermal Pad for SSD: there is a 70*20*1mm thermal pad for your M.2 SSD, to improve the heatsink. | Package inlcude: 1x hollow cover with dustprood mesh, 1x screw for SSD, 1x screw for cover, 1x screwdriver, 1x 6W/mK thermal pad

SSD Heatsink Thermal Pads for Steam Deck: the Pure Copper Heatsink is sepcially designed for Steam Deck 2230 SSD ONLY. | Heatsink and full set opening tools: ssd heatsink and full set tools for removing back plate, include copper heatsink, opening pry tools, thermal pads, screwdriver and screws. | Pure Copper Heatsink: Pure Copper has good heat dissipation, it will reduce the overheating risk of your steam deck, improve the game experience. | Phase change and silicone thermal pads: the thermal pads can not only improve heat dissipation, but also can make the ssd surface flat, to aviod bumping up against the Shield cover. | Package include: 1x Copper Heatsink, 2x Phase change thermal pads, 2x Silicone thermal pads,1x screwdriver, 1x Opening pry bar, 1x Triangle Pry Tool, 18x Screws(8 long and 8 short for back plate, 2 for SSD).